Counting matching models…
GeoCaching 830: Transport / Schutzkappe für Angel-Elemente Kompatibel mit 10Meter Angel von Geo-Versand ( Modell 2025 ) - Transport / Schutzkappe bei Verwendung der 810 - Angel-Adapter - Zur sicheren Entnahme der Angel-Elemente 821 / 822…
This is a simple box designed to fit a company's stock certificates, plus their tokens. This specifically fits the Lookout games 1830 cards, plus after market wooden tokens. How I Designed This I used a BoxSlide OpenSCAD file that creates…
For the screw point use any one with a t handle and it should fit the one i had aligned on a 45 degree angle so thats what I designed it with. I recomend adding foam between the camera and mount to hold the camera and mount in the right…
You'll need 2 universal peg. No Support. %10 infill. My first time uploading a remix-model here, please correct me if I did anything wrong.
I am highly doubtful anyone else will find this model useful, but just in case, here it is! The threaded insert on my electric razor broke off and fell down the drain, making the entire unit useless. Since it's probably 15 years old at…
The battery on my Samsung L830 expanded making it unusable so I made this adapter that uses the original bms to trick the camera into running off any 3-4.2v power source. The original battery door doesn't fit with this mod so you will…
This model is compatible with the lego system.
This model is compatible with the lego system.
I print them solid. I use abs. I used these t bolts. https://www.amazon.com/dp/B0BYJP2GJW?ref=ppx_yo2ov_dt_b_fed_asin_title The rear bolt clamps down the weird thing in the groove , so the featherboard wont move into the blade. The front…
Hey buddies! Just a simple adapter to replace the original Wifi/Bluetooth car installed on my ASRock H270M-ITX/ac motherboard, by a Dell DW1830 BCM943602BAED which is compatible with MacOS. I designed it for my new Hackintosh. 3D printing…
LED-conversion of my work lamp and added a 12V PWM Fan Controller Board. Working on directional hood for the airflow, and filter. AC 110V-220V To DC 12V Power Supply. 12V COB LED Strip 4000K DC 12V Fan Speed Controller
Storage Box for Garmin Devices. Garmin Varia and Garmin Edge 830. This means they always have their fixed place and I no longer have to search for them.
This model is compatible with the lego system.
This model is compatible with the lego system.
Use the “20 mm Small Thread, Plain Head, T-Bolt” to fix the battery mount to the multiboard: https://than.gs/m/973957 As mentioned in the original modell, use 4 M3x20mm screws to fix the mount to the charger. This model fits the…
A replacement for the original component with altered geometry near the hinge, which often fails. Printing with 10 walls, in vertical orientation with supports, the material that performs well at 100 degrees is nylon with fiberglass:…
I have included my files, but your conditions may vary. With a large model, I found it useful to print with a draft shield.
Foreword : Do this at your own risk, LiPo's can be spicy : ) Note that this case is designed specifically for 5x18300 cells and the IP5310 charge controller! I hate seeing useful electronics go in the trash so I collected several…
Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold
Snap on DT830D stand with test lead holders. Features: Snap fit, locked in place by pins in the screw hole, no fasteners needed Designed to use minimal support (the stand is upside down, make sure to slice it correctly) Built in foldable…
Quickly made these up as I've battered the CNC casing on mine, sitting it down whilst charging and the occasional drop. Designed to work with the CNC casing for HW 4830, which is also sold as a CNC Hyper Charger 1800w by Alien Rides,…
Botão de reposição Ar condicionado elgin 8300
This is a wall mount for the Logitech K830 it has four screw holes i found i only needed to use the two on the top and overcompensated when making the model. The phone holder should slot into the bottom of the keyboard holder. I use this…
It's designed to be fitted to the stem cap, distance between holes is 28mm. It needs 2 spacers between the cap and support and 2 10mm long spacers for fitting it, outer diameter of the 2 spacers is 8mm. When fitting it please make sure…
A simple holder for the DT830B multimeter. The mount allows enough space to wrap cords around it before mounting probes to prevent clutter on the Skadis. Printed at 10% with no supports needed. The holes for metal probe ends are roughly…
I didn't like the pegs that eventually break. I think that t-clips are better, so i edited it.
From https://www.thingiverse.com/thing:2815310, by erdem03. Backup for when thingiverse offline, OEM no longer available
holder for 18300 battery salvaged from vape. remix of Miguel RL's work (also a remix if I remember right)
Gridfinity Performance Tool Spindle Nut Socket Holder Printed in Super PLA+ .6 Nozzle .15mm Quality First Layer 220/65 6x2mm Magnet holes in the base 15% Infill (You could probably get away with 5-10%) 2x2x4 Footprint I just used paint…
Gridfinity Performance Tool Spindle Nut Socket Holder Printed in Super PLA+ .6 Nozzle .15mm Quality First Layer 220/65 6x2mm Magnet holes in the base 15% Infill (You could probably get away with 5-10%) 2x2x4 Footprint I just used paint…
A project inspired by this forum topic , it allows you to use a standard USB power source with a Garmin Flush Out-front mount, Triathlon mount and probably also mounts from other brands that are compatible with the Garmin Flush Out-front…
These are jigs to assist the assembly of the Faller Eurotower/Observation tower model 191830. The inner ring model is to assist with the assembly of the legs holding the roof so that they will align with the small assembly holes in the…
The model is 0.40mm high. I printed at 0.12mm layer height on a smooth plate with top surfaces ironing on. I left the default 0.20mm initial layer so the final print ended up 0.44mm actual height with three print layers. My ironing wasn't…
This a driveshaft replacement for Revell 24830 and 24831 RC cars. Suitable for both front and rear. Must be printed in 100% infill and with supports. Tested successfully with PETG. ABS should be fine as well, but PLA is likely too soft…
This is to replace a Snapper mower speed lever anchor part number 7032830YP. The biggest functional difference between the actual part and this part is that the mounting hole is circular instead of square. My mower didn't have the square…
small modification of the orignal ... a little bit larger ... a little bit "rounder" Category: Fashion
SKADIS compatible mount for a Commercial Electric MAS830B Multimeter. Couldn't find one that I knew would work so here we are! Fits snug on the IKEA SKADIS pegboard!
Print model for 19 Inch rack mount for HP Elite 8300 USDT. Print Settings: -Printed in PETG -0.15mm and 0.20mm QUALITY -External perimeters first -Supports: Only needed on the left and right bracket Keystones Needed: -4 Small -2 Large…
Stihl C26-2 TrimmerHead Eye let Fits - Boccola Guida Filo - OEM 40027138307 - Mowing head AutoCut 26-2 Part Number 02640 Recommended filament: ASA - PA - PACF - ABS - PC COMPATIBILITY INFO: FS55 FS56 FS80 85 70 FS74 FS76 90 FS94 FS100…
This replacement part is available from LG Canada for $6.11 (you rock LG, love your stuff), but designing this was a chance to learn to trace photos in FreeCAD. Attaches to the underside of the R/H door with a single Phillips head screw,…
Efficient transport case for the protoboard's project placement, ensuring total security and preventing any damage durin
Lens hood LH830-02 for the original Sigma 50mm f/1.4 Art lens
Bosch Charger AL1830CV SKADIS Mount with T Clip system
10-inch rack-mount bracket designed for the XikeStor SKS8300-8T managed 8-port 10 GbE switch. The mount attaches directly to the switch using the factory-supplied screws. The rack mount has a cable channel for power supply cable routing.
GeoCaching 830: Transport / Schutzkappe für Angel-Elemente Kompatibel mit 10Meter Angel von Geo-Versand ( Modell 2025 ) - Transport / Schutzkappe bei Verwendung der 810 - Angel-Adapter - Zur sicheren Entnahme der Angel-Elemente 821 / 822…
This model replicates the external profile and mounting geometry of the factory end cap to maintain the original appearance and structural support of the chassis. Design Features Matches the GP-830 side panel footprint Clean exterior face…
Wall mount bracket for the Bosch 18V charger model AL1830CV. Print it on its side to ensure it is more flexible and durable. PETG is better for this use case, but PLA should be good enough.
Slide your Logitech Illuminated Living-Room Keyboard K830 under the coffee table for a clutter free experience when you're not using your HTPC. Print Settings Printer: Ultimaker Original+ Rafts: No Supports: Yes Notes: Some supports for…
This is a simple box designed to fit a company's stock certificates, plus their tokens. This specifically fits the Lookout games 1830 cards, plus after market wooden tokens. How I Designed This I used a BoxSlide OpenSCAD file that creates…
Replacement for the stupidly designed clips used to hold the parcel shelf onto the strings in the boot on the Mk8 Fiesta Ford Part Number 2423830
For the screw point use any one with a t handle and it should fit the one i had aligned on a 45 degree angle so thats what I designed it with. I recomend adding foam between the camera and mount to hold the camera and mount in the right…
You'll need 2 universal peg. No Support. %10 infill. My first time uploading a remix-model here, please correct me if I did anything wrong.
This model is compatible with the lego system.
A clean, no-fuss Gridfinity tray designed to hold four full-size 830-pin breadboards. Part of a larger electronics organizer setup — fits right alongside your jumper wire trays, microcontroller holders, and whatever else lives in your…
The hinges on the Olsen and Smith 803L outdoor store box seem rather easy to damage so I made this model for a replacement. Since this is for outdoor use I'd recommend the use of ASA filment and as some strength is needed I'd advise a…
This eyelet sleeve is a repair part for the STIHL Autocut 25-2 trimmer/mowing head. Printing recommendations : Material : PC Blend or PC Carbon Fiber Print sheet: Satin or smooth PEI Printer Enclosure: recommended Nozzle : 0.4 mm Slicer :…
🍞 Breadboard 830-Pin Protective PCB Base This case is designed to permanently stick to that factory tape of the breadboard ( MB-102, 164x54x9mm ). It seals the bottom, protects the contacts, and gives the breadboard a clean, rigid plastic…
This package contains two top cover models designed for mounting a 92×92×15 mm cooling fan on the SKS8300-8T switch. One version is intended for direct fan installation. The second version is designed for internal fan mounting and allows…
This is a simple 3D printable bearing press insert designed specifically for MR18307 (18×30×7 mm) bearings, commonly used in bicycle hubs. It is intended for use with a DIY bearing press setup (threaded rod + washers + nuts), allowing you…
This dumb insert is required to use the PCL704 / PCL704B and all aftermarket adapters attach to it, and it is not replaceable since it has been out of stock for over 6 months and no aftermarket sellers have it in stock either. Mine broke…
📐 Angled Desk Stand Legs for 830-Point Breadboard Case A quick, functional desktop addon for your prototyping setup. These minimalist stand legs allow you to rest your 830-point breadboard case at an ergonomic angle, making it much easier…
Nursery Rhyme Art - Mary Had a Little Lamb - 1830 3D printable model.
This is a replacement for the table angle adjustment knob that adjusts the angle of the table on the Ryobi BS901 9" Band Saw. This part is no longer manufactured by Ryobi. It is not an exact replica, but it is fairly similar, and most…
Basic cradle for standing up a cheap DT830B Chinese multimeter. These DMMs are known by other names. No fancy probe holders or anything, just a stand which also tilts the meter 20 degrees. Print without supports, and in your slicer,…
See Post-Printing section for installation tips This is the plastic end piece for the rip fence that came with a Craftsman 10" Table Saw Model Number 137.218300. This is quite an old tool, and I doubt anyone will ever find this useful but…
This is my take on an 1830 Game Component Organizer. It's designed for the first Lookout Edition of 1830 and here it should fit snugly into the box. My edition of 1830 contains a lot of game variants with extra tiles. I've designed the…
An attachment angle for my car broke so I created a replacement in CAD. For the unlikely case that anyone is searching for a replacement of this part, I put it here. It's the part that connects the center console panel to the tunnel…
So, here's my take on a pair of brackets to hold the Logitech K830 keyboard under a shelf, a table, etc. It's heavily inspired by Dampmaskin's mount. I liked their idea of slinging the keyboard under a surface, but I felt there needed to…
STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!
Remix of Bigmac76`s Skymule motor mounts with an extended shaft of 27mm to enable a 2830 motor to fit flush with the outer edge. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Supports: Yes Resolution: 0.2 Infill:…
Inspiriert von der Wandhalter Wallmount / Wandhalterung Bosch AL 1830 CV Charger" by vinyli habe ich zuerst den Halter umgezeichnet, da ich Fusion treu bleiben wollte. Hiernach habe ich die Löcher um wenige Millimeter weiter nach außen…
The front Bumper on my brothers rc car broke off, so i designed a spare one. its mountet like the original one, looks a little flat from the front, but its printet super easily.(and is really robust)
Work in progress! Battery Clips for Toshiba Portégé R830. My son knocked both of them out and only managed to find one of them. I measured it an modeled it strengthen it a bit, mirrored it and printed. I installed both of them, and they…
UPDATE 2019-03-20 I split the money from the shares for those that use poker chips. I reduced the total dimensions of the inserts to 283 X 220 X 60, reducing the long dimension of the boxes (was 225mm) to 220mm. This should fit the…
i got sick of almost loosing my dongle for my logitech k830. the holder clips on the back and holds the dongle. print two and you have a flash drive holder too.....and your keyboard won't wobble. Print instructions i advise printing with…
Wall mount for the Logitech K830. Can also be used simultaneously with https://www.prusaprinters.org/prints/29377-k830-usb-holder Update: I've added a file for a set that mounts the keyboard parallel to the wall for more space saving.
Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold.
Needed few changes to increase strength and retention Battery Clips for Toshiba Portégé R830 R1. My son knocked both of them out and only managed to find one of them. I measured it an modeled it strengthen it a bit, mirrored it and…
These are the sealing caps for various Bosch, Siemens and Neff oven doors.I printed them on an SLA printer with HighTem
Easy and quick to print. These two parts allow the battery charger to be fixed vertically. It is best to print with supports. It is necessary to put slightly longer screws (3x25). I printed it with PLA.
Fits two 830 point breadboards with spacing to allow an ESP32 dev board to span between them, solving the problem with those boards not fitting common breadboards with any points to spare. As designed it works perfectly for Elegoo brand…
I adapted the orginal design from SKREY so I quickly can detach the wallmount from the wall and take the charger with me. Thanks for the orignal design. Category: Tools
This is a remix (draft) of the "Makita Mega Battery for 18650 10x extended 15x 20x replica" ( https://www.thingiverse.com/thing:5026796 ) with the following changes: modified version of 1.stl + 2.stl to fit a BMS (BL1830) like…
Držák na stůl pro multimetry Voltcraft LCR4080, VC830 a podobné
Created for use with the DJBB Maggie antenna . This is an enclosure for the Adafruit MAX98306 stereo amplifier module. It has aux in and aux out. I chose to power it with a powerbank via a USB cable, but you could use whatever as long as…
This is to hold the probes of the multimeter to the sides like shown in the image. You will have to give support. Also use high strength glue to stick these as it takes some effort to take out the probes. Category: Tools
If you have a Samsung refrigerator with a French door, you know there's a little mullion flap between the two sides of the door that slides into place when the door closes to insulate the gap. You may have also at some point accidentally…
This is a remix of SKREY's wall mount, allowing you to attach the Bosch AL 1830 CV charger (for “Power for All 18V Alliance” batteries) to the honeycomb storage wall. You will need four M3x20 screws to attach to the charger (this design…
My fancy TPU cover / case / bumpers for a few different charger models. Charger Models so far: The new V4SC from folks like GuLi-EUC or Roger Charger. 105.5mm width, 42.8mm high. HUAWEI Charger R4830G1 from NingNing / houeuc. A common…
Small Wall mount for Bosch Charger. Print 2x, 4 longer screws for charger needed (M3x20mm) No supports needed, print with 25% Infill
I printed that from PLA on side, like author said, it is better for flexibility, when you putting in the charger.
![EUC HyperCharger Bumpers [V4SC, Huawei R4830G1, Alien Rides]](https://media.printables.com/media/prints/515481/images/6374134_e093908d-bf4f-4ecd-87f1-5703d3dc672c_babb4ff6-5f04-4cc9-881b-4423ea002d90/charger-bumpers-title.jpg)
