112 models
You must REALLY hate all that extra filament laying around to be looking at these.. The chassis take about a kg to print, and the drawers, feet, and hats take another like 600g. On the bright side though it all fits in a 200x200 footprint…
Above Ground Pipeline! Everyone needs a pipeline, now and again. Be it your wargame, diorama, a scenic vista you are trying to create, or a hardcore game of 40K! Well, here's a cheap and dirty set of above-ground pipelines. Ready to pump…
https://www.buymeacoffee.com/maxt ---------------------- 3D print with 5 different houses that can be placed in a window. You have the possibility to change the houses and rotate them in whatever way you please. The houses can also…
I made this to feed the filament up from below an IKEA Lack Enclosure and hopefully keep the filament dry. It also works to feed it top down by rotating the PTFE coupler 180°. I startet out by remixing the Parametric Enclosed Stackable…
Brackets for mounting Noctua NF-A12x15 fan above PSU in Fractal Design Terra case. One is mounted on top of the PSU, the other one is mounted on the case from the front panel side. Works with all Terra's inner bracket positions. Must be…
Garmin/Sigma Rox 11 mount above stem Again another Gramin / Sigma Rox 11 mount for a handlebar diameter of 31.8mm. I Designed this for my own needs (fits perfect over a canyon v12 stem) so i hope it fits for you. It's easy to Print but…
You may be like me. I have an above ground pool made by Intex. Every year I go to set it up and every year something has broken or is missing from the previous year. Well, this year I had a bunch of broken pool pins. I didn't feel like…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
At this point, my 3D printer really only exists to mask my serious board game glamorizing problem. While there are already 3D-printable inserts for Above and Below, none of them were designed by a psychopath who protects cardboard tokens…
This mount conforms to the dashboard and tray contours of the 2015 and above Chevy Colorado and GMC Canyon. There's room for double-sided tape on the back of the mount in the tray area and in the front of the mount on the stereo fascia -…
My new Intex Pool didn't come with a surface skimmer but it does include this wonderful ionizer surface jet that lends itself well to the task. It's a simple bracket that holds a skimmer net in the flow of the jet, pushing surface debris…
This is an updated version of the ISSCV from Space Above and Beyond (SAAB). It is scaled to 1:45. Total model length 300mm. Features Position-able main engines Added Engine V2 which is high poly and smooth Rear Engine V2 has smooth engine…
I was asked to model this top cap for an above ground pool based on an old one that was deteriorating. I do not know the make or model of the pool or part (installed by 3 Brothers Pools if that helps), but I have included a photo of the…
Hello! I am uploading some generically rendered transfemoral prosthetic socket models I had made back in the day. These are (-yes,- a little low res and -I know- they could use a little clean up) produced and provided for EDUCATIONAL…
I needed a mount for my Xiaomi Aqara Motion Sensor P1 to attach it under a kitchen cabinet above worktop.The sensor easily snaps in. I was unable to find such a design here so I created it myself. Along with a automation in Home Assistant…
Another way to mount your servo for your MN90/MN99 truck. This is an 'above axle' mount. There are a few different files to help for different servo widths. Choose the one that fits your servo wide best. Note: If you don't see one that…
When I saw m99's pool hose holder , I was struck by the genius of that design. Why Intex (and other pool manufacturers) thought it was a good idea to have the pump hoses coming of the sidewall of a vinyl pool with no support whatsoever,…
This is a simple towel hook that hangs off the top steel rail of a Coleman Power Steel pool. I designed it for my 22' pool but I imagine it would fit other sizes as well assuming the top steel rail is the same shape and size. Printed in…
Modeled close to the Peterbilt 362 cabover this is an almost 1 for 1 swap of Professor Boots semi cab. All parts work on the original frame and any new pieces use existing mounting points. let me know what you think. You will need a few…
English Version PTFE top guide for the Kobra 3. This allows you to guide the tubes when they come in from above and you don't have the ACE on the left or right. Printed in PTEG with a layer height of 0.2 mm and an infill of 15%. German…
This is a holder that allows Orbit Voyager II and Saturn III in-ground sprinklers to temporarily be used above ground. Originally planned as a way to help check coverage areas before trenching, they also allow you to run the sprinklers…
Prints on its side. 4 t/b/w 12 - 15% infill. Blocks in Red are removed and discarded.
SoapVortex is a loop-based wand designed to create larger, slower-forming bubbles—not a cloud of tiny ones. It features a unique design, with fluid-retaining channels on both the top and bottom of the loop. These ridges help continuously…
Everything that floats in our above ground pool would work its way into the skimmer so I created. Printed in white PCTG
Prints on its side. 4 t/b/w 12 - 15% infill. Blocks in Red are removed and discarded. *Edit non moving wheels
Update [11.12.2024] New filament arm, i broke first version two times, new version with two parts, the smaller part needs some light sanding on protruding connectors Edit [04.05.2024] I adding filament leading arm for 20mm pipe (also cute…
These mounts hold closet rod 1-5/16 in. Dia for ceiling mounting above a window. The extension on the bracket is likely no long enough for wall mounting and holding the plant pot off the wall. Works great for ceiling mounting. See…
Print two pieces with PLA or PETG. Fits within the hole and cable notch under the sensor. It was made for the LG C4 TV, but can be easily modified for your screen. If you want me to make a version for your TV, ask in the comments with the…
As much as I love the cardboard insert artwork that came with the game, I love organization more. This has plenty of room to store the deluxe kickstarter components as well as the original cardboard. It also has room for the…
Attach your speaker to your monitor stand pole, made for 35mm wide poles 4 screw holes in the plate, but you can also use double sided tape or just simply friction fit the speakers. I am using Klipsch R-14PM which are 147x190mm base. This…
Bring explosive energy to your display with “Above The Rim”, a dynamic basketball slam-dunk bust designed specifically for clean, support-free FDM printing. This sculpt captures the moment just before the dunk — powerful arm raised, ball…
I liked the original model, but needed to mount my headphones next to a wall and didn't want to scratch them, so I rotated the headphone holder itself and made it way higher so it can hold headphones above the table (should be high enough…
The return hose on our Coleman 14' x 42" above ground pool shoots the stream straight out into the center of the pool. Any pool this large (or larger) really should have the return flow diverted to the side, away from the inlet so that…
M60 Nut & Bolt. Well above average size \_(ツ)_/
If you want to place something above the printer but don’t want to put stress on the top plexiglass—perhaps to avoid bending or causing issues with the print head when opening the ventilation Material: Prusament PETG, 20% infill, 0.4…
It's just a support for standarise pictures from above using your cellphone. You can ajust the hight easily by screwing the legs If you like my model, please consider -> https://buymeacoffee.com/teacherribeiro
Prusa CORE One (Plus) Hygrometer - Thermometer mount above the rear fans (press fit) illuminated by the original LEDs Place on top of the backside fans (middle position, press fit on the fan mount screws), can be easily removed, does not…
A dreamy flight above the clouds (two colours)
This is a bin made to fit in the space above the glove compartment of a gen 5 Toyota Rav4. There are models for no front to the bin, a half-height front, and an almost full-height front with finger hole. I printed the bin in PETG since it…
Prints on its side. 4 t/b/w 12 - 15% infill. Blocks in Red are removed and discarded. *Edit non moving wheels Better printability with windows and rims
This is a special spacer to be used with the BlkTec R8 handlebar (as used on the 2023/24 Polygon Helios A7X bike). This handlebar has a shape that doesn't allow you to put spacers on top of it when adjusting the height, instead, you…
This phone mount is designed to convert a handlebar phone mount to be used in a 2015+ Chevy Colorado. It conforms to the top pen to over stereo area and has a 1.25 inch tube on either the left or right side depending on which side you…
Easy loading from the front and a smaller footprint
This Mount feeds the filament from above, as there is limited space on the left and right sides.
This is an insert for the Above and Below board game. BASE GAME ONLY. I know, oldie but goodie. I just got it second hand and it really needed an insert. Hopefully will get some expansions and promos in a near future… But for now, this…
Ho scale (1:87) above ground tank fueling center as found at facilities running fleets of vehicles. various build options included photo shows file "above ground fuel center" printed with .4mm nozzle in PLA protect your fuel tank from…
This is a keyboard tray I made to place the keyboard above the Cintiq monitor and out of the way. The model is designed for the 22" monitor. Feel free to download and modify for your need. If you reupload please mention me in the notes…
This is my remix of the great job of @FlyHighFPV for a GoPro mount based on Doom. My remix is for a Toothpicks Drones and takes a micro fpv camera (19mm) or a nano (14mm) camera with adapter (like RunCam Nano 2 that comes with it). Print…
I needed a different location to mount my ESC while putting on a custom chassis and moving the battery rewards on my Redcat RDS….so I created this little table that bolts directly on top of the battery mount! Easy! I printed in PLA,…
The insert holds the core game and the Desert Labyrinth and Underforest expansion. The box will close fully over the insert and can be stored in any orientation without spilling or mixing resources. The photos show the game with upgraded…
I wanted to mount my old Klipsch BAR48 soundbar above my LG 55Sk8000 TV. Other mounts were either too big or too small. This worked perfectly. Do note, personally, I have the sound bar free floating above the TV, while it feels fairly…
Bought the game and immediately looked for an insert. Didn't find one so made one. Print 3 card trays, fits sleeved cards. One of each of the rest. Pictures show how I put things away.
Easy to print Toy for 2years old kids and above. There are 7 pieces for this game. It's good to print the most pieces in a different color Be careful with your kids if they try to eat or swallow the pieces. keep the infill above 70% at…
Nvidia just discontinue physX and I need my old GPU to run my old games. However, the PCI-E slot is at the wrong place on my MB. Hence I will need to raise the GPU above the mother board, and use soft ribbon cable under neath to make it…
🐢 Above Tank Turtle Dock – Expand Your Tank Space All you need to expand your turtle tank and significantly increase swimming space by moving the basking area above the aquarium. This above tank turtle dock allows you to raise the water…
I have very large trees over our above ground pool and am forever and a day emptying the skimmer. I designed and 3d printed (in PETG) the following pool net filter holder to protect the skimmer. I decided it was easiest (strongest and…
For the sliding I use M6 screws with nuts and washers. Some printed bolts should also work. I taped the back legs to my desk for extra stability but you dont need to, simple scotch tape should work.
A laptop stand that attaches behind your monitor. Save space with this stand! You will need x2 bumpers, so the weight does not rest on the monitor.
This is a basket/bin I made to hold some socks. It fits in my closet in the unused space above the clothes hangers. It can be attached using double sided tape or using screws. Be careful with screws because the back panels in these…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE: Added an Apple wireless charger end as an option.…
This set of pieces, for some of them derived from a first enclosure based on the IKEA Table proposed by Prusa, and from other models for supporting the spool, enables the user to put the spool below the printer and not above, which can be…
Magnetic mount for pool light to be used with Intex above ground pool. I bought lights 8.5 cm diameter and the suction cups are not working in the intex above ground pool. There is also magnet which can keep the light on metallic surface…
My Jack O'Lantern Canopy for Toothpicks... Print it on TPU.. Print Settings Printer: Delta Rafts: No Supports: Yes Resolution: 0.14 Infill: 25% Filament: any TPU Orange Category: Hobby
With this model and a 30mm Forstner-Drillbit you won‘t have to disassemble your motor-bay anymore to adjust your KW V2, V3 or all other damper’s with top-adjustment. No risk of breaking the fragile plastic rivets every time you take of…
Above Desk Keyboard tray Clamp 3D Print Hardware: m3. screws a and m3 nylon nuts 3m double sided tape Foam board 2 feet by 7.4 inches Mouse Pad (recommended to use two pillars on each side instead of one centered one for best stability…
Magnetic holder located above the Z-axis. Installation without disassembling the printer. Especially for frequently changing printer users who change the filament, this tool is useful - an indicator of which filament is inserted. /…
Since I have my Prusa XL in a trotten and want to use an enclosure made of a "hat" and a "front I designed standoffs for the IKEA Trotten. I printed them in PLA, but other Materials should work too. You will one additional M4 or M5 Screw…
bodge version without hole and keychain model (you need to scale it down because it's pretty huge) Model ready to print in 3 colors. Different layer height and separated objects in 3mf file format so it should work with single extruder as…
This is an adapter I made for the ugly cupholders that annoy me every day in the best cab ever made for a garbage truck the Autocar ACX. Who thought it was a great idea to make a cupholder that can only hold a Gatorade? They must of never…
A cabover version of the printable semi truck. This can also be edited for free. Link: https://www.tinkercad.com/things/964G3CpthJy-printable-cabover?sharecode=WNnJd8Ek1POKo4mm1SSPWbKyqQjI05WIrOD_v3_EcrM Additional information: This truck…
A little cubby that i designed to go above the dining table in a Scout Olympic. Printed in two parts and snaps together. Attaches via vhb tape.
AirPure holder for Anycubic Kobra 3 above the screen. This holder allows you to place your AirPure filter near the Anycubic Kobra 3 screen without any tools. A bit of double-sided tape keeps it securely in place. The holder consists of…
Eibos Easydry PrusaXL Side Mount, Fits above Sunlu S4 dryer on my brackets I also designed. Works with or without Prusa XL Enclosure. Requires 2 3030 nuts and holes are sized for M4x16mm hex socket cap screws My Eibos has the extended box…
this is a 1.16 peterbuilt cabover semi built 100% by me. it takes about 7 hours to print for each half if you split it in half like I did, and probably takes closer to 18 hours total including interior. MORE MODELS SOON! thanks enjoy :)
I made this cable holder so the cables wouldn't get tangled up on the table.
A passion project of mine mainly focussed on reducing setup-time Pro's: + No longer need to place/sort the Info-Cards manually + Glyphid health can now be shown in a more 'structered' way + Most important info is still visible Con's: -…
A curved, printed leaf that lies on the potting soil along the pot wall, beside the plant, and holds a piece of a double-sided yellow sticky card flat, 10 mm above the soil - where fungus-gnat adults come out. Three short legs end in stop…
A one-piece collar that holds a plant's plastic nursery pot inside a decorative pot (cachepot). A ring holds the nursery pot by its rim, or by its tapered body just below the rim. Four petal-shaped arms rise at 55° and rest on the inner…
This part was designed as an OEM-look replacement joint pin designed to secure corner joints and frame pieces on small INTEX rectangular above-ground metal frame pools. The pin measures 2 1/4" (67mm) end-to-end with a barrel diameter of…
Hello! I am uploading some generically rendered transfemoral prosthetic socket models I had made back in the day. These are (-yes,- a little low res and -I know- they could use a little clean up) produced and provided for EDUCATIONAL…
This 3D printed organizer keeps the components from the Above and Below Haunted board game neatly stored in a single container. The design is optimized to hold the ghosts, boats, mystic brew, pearls, and all goods tokens together so setup…
🐢 Above Tank Turtle Dock – Expand Your Tank Space All you need to expand your turtle tank and significantly increase swimming space by moving the basking area above the aquarium. This above tank turtle dock allows you to raise the water…
Prusa CORE One (Plus) Hygrometer - Thermometer mount above the rear fans (press fit) illuminated by the original LEDs Place on top of the backside fans (middle position, press fit on the fan mount screws), can be easily removed, does not…
Everything that floats in our above ground pool would work its way into the skimmer so I created. Printed in white PCTG
Labeled Multi Color Print of the common Voron above bed Wago wiring. I use a fake MMU extruder setup on my printer. there is a painted 3mf that uses T0 (black) and T1 (Blue) for the single color change swap. Other's can use do manual…
This camera mount is specifically designed for this camera: PEGATISAN Webcams Computer Camera HD 1080P Eye Contact Camera with Microphone 120°Wide-Angle 2.8 mm Lens…
With the funnel you can, for example, fill windscreen washer fluid into your car. It's practical that you can hanging it at a bottle / canister.
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an Air intake above the hood for the RC car RMT T98. The air intake fits beautifully into the original body. You have 2 versions, smaller and larger. It prints…
For printing TPU I used this Top Spool Holder https://www.printables.com/model/1160668-alternative-spool-holder-prusa-core-one but the TPU is not good inserted into the Nextruder. For this I develop this pulley. Needed parts: 1x Print…
The 90° bend at the end of the original spool holder needs to be flattened. I used a bench vice, a hammer, and anvil. Aside from the print, you'll need some M4 screws and a nut: 1x M4 nut 2x M4 12mm or 14mm screws 3x M4 8mm screws…
These are organizers to hold the large number of tokens in the board game above and below. You can use rubber bands to secure the tokens in the holders for storage and transport.
Filament feeds from Sunlu dryers on top of my DIY enclosure, down through a wide slot in the enclosure lid and I wanted a guide for inside the enclosure to keep the filament orderly and not rubbing against the cross member. I designed it…
📝 Description Outline: 1. Overview / Purpose When flight simming, I could either have my throttle quadrant mounted on top of the desk, with the mounting system available for my modules or other components, or I could have the throttle…
Made the mount slightly taller to accommodate my bed that is 14.7mm above the Extrusions
Made the mount slightly taller to accommodate my bed setup with a kinematic bed
This model has been remixed from Jerrari3D's amazing 270 Table Top Kit V2 to allow it to be used for structural support above a 270 3W drawer for the use of three 1w or a 2w and a 1w above. Allows for the screw from the footrails to be…
It was made so filament won't get stuck in the filament detector.
This 3D printed organizer keeps the components from the Above and Below Haunted board game neatly stored in a single container. The design is optimized to hold the ghosts, boats, mystic brew, pearls, and all goods tokens together so setup…
F1 team labels with text protruding above the surface
