1,400 models
About This Remix: This is a remix of the Sith Acolyte Mask (Star Wars) by Killonious . Killonious did a wonderful job designing the mask as a prop display mask. They also have an etsy shop . I made this remix because the mask was…
Print approx. €15.07–€18.42 excl. taxPreliminary estimate for one variant
Here you have another large 80cm filament print of a robot. This one is based on the Cylon character “Centurion” from the Battlestar Galactica movies and series aired in the 70ies & 80ies of the last century. The original 3D model was…
Print approx. €16.10–€19.68 excl. taxPreliminary estimate for one variant
Some practice rings to improve your darts focus! ;-) Enjoy!
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Don't you hate the way most coasters don't catch the condensation coming off your ice-cold drink? Well, this coaster is just what you need! A beautiful coaster that will protect your coffee-table or desk while you watch Battlestar…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Hello Nerf enthusiasts, If you're looking to elevate your Nerf Jolt experience, look no further! Here, you'll find an exceptional custom Upgrade Kit that not only enhances your blaster but also imbues it with a unique military aesthetic.…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Use the screw that came with the camera case. Push the back of the print into the slot and push the front firmly until it clicks and is securely in place. Use the lowest possible layer height and a wall count of 4 for best results (with…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Tactical shield that fits in the hands of the MINI 13 figure. - Handle print with supports - Also available in a version with POLICE lettering.
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Cylon Raider : Battlestar Galactica 2004 Series bio-mechanical life form . While it resembles a sleek, "Cylon-head" shaped spacecraft, it actually possesses a biological brain, organs, and even blood, allowing it to "resurrect" into a new…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for one variant
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I’ve transformed the iconic Benchy into a fully functional pencil sharpener with a hidden twist! The goal? Keep the classic boat look while integrating a discreet sharpener under its removable roof. 🎨 Clever Design: The cabin is fully…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
I have only printed in PLA so far, but will try PETG. Print settings (CURA) 5 walls Slicing tolerance exclusive 20% infill Assembly is fairly straightforward, the spinner body can hold 2 AA batteries for a counterweight but other heavy…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
A stencil for drawing letters in standard galactic alphabet. Used in Commander Keen or Minecraft. Unfortunately I had no Prusament galaxy black, thus I printed it with white PETG. If you want to have bigger or smaller letters, or wish to…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
There are many overhang test models with 60, 70 or 80 degree overhangs, but do they ever actually print 70 degree overhangs? In the actual shape of the model to be printed, even an overhang of only 55 degrees is extremely difficult. This…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Here's my version of the Galactic Credit Standard. Category: Props
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
This is a roughly the size of a crankbait practice plug for practicing casting spin or casting style rod and reel setups. A split ring can be added to aid in simulating the casting of lures. Changing the density of infill allows for…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Shopping Basket with Screw Assembly – Practical, Sturdy, and Stackable This 3D-printable shopping basket is designed for everyday use and easy assembly. The construction is solid and functional – ideal for home, workshop, or office. 🔩…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
this is a military war tactical dagger created by me and you can remix and edit this model to add features or completely just use the blade or handle to make your own new knife or sword so feel free to remix this! but give credits.
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
There are two types of flower-shaped sewing practice boards for children. They can practice safely with a blunt sewing needle. Finished products will be beautiful handcrafted gifts or cute home decorations. Dimensions: height: 150 mm…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Rank Badges for the Blue Commanders! Check out my other badges For the whole set! I’m putting together a display for them too. Printed at 25%
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
You can use this organizer for, for example, flash drives, screws, batteries, coins and other small things.
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
The Covert Instruments practice lock works best for me when fastened to something sturdy. I typically use a small vice to do this. However, I wanted something that would allow the vice to hold the cylindrical lock in a more robust way so…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
I had the nutty idea of using my M1 Garand rifle in 3-Gun competition. I wanted to practice speedy reloads at home, safely, using dummy rounds. You can use dummy rounds, such as A-Zoom snap caps, in a Garand clip. But there are a few…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
AWCY 3D TACTICAL 2A PRO AR JIG READYMILL 5/16" TO REGULAR ¼" BIT ADAPTER KIT If you have printed the jig you may not be able to readily find the READYMILL adapter and 5/16 endmill tools that are designed to fit it… You may have noticed a…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
🛠 Materials & Hardware: PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] TACTICAL SKULL COLLECTION: SPECIAL FORCES SKULL (Charm) Honor the elite with the Special Forces Skull Charm ! This highly detailed charm for Crocs, backpacks,…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
This is my first sculpture attempt of the Dark Matter Hauntling's mask from Teamfight Tactics. The model is not 100% accurate as I added some modifications compared to the original in-game design. I am also joining the Blender file with a…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
🛠 Materials & Hardware: PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] Boonie Hat Skull (Delta Skull) Introducing the 'Delta Skull', a highly detailed, tactical-themed bust of a human skull wearing an iconic military boonie hat.…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Night light lithophane for Battlestar Galactica fans.
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
This model is based on an normal version (2 wall layers) of a Tactical Ballpoint Pen https://www.printables.com/model/412788-tactical-ballpoint-pen. I adjusted it for use with Pilot G2 refill. I also added a small protrusion, to which you…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Killflash to fit on Predator V3 Tacticon Red Dot Fits like a glove on the Predator V3 Tacticon Red Dot and is simple to press on . Is a tight fit so should never fall off unexpectedly.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
🛠 Materials & Hardware: PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] GHOST OPERATOR SKULL (Tactical Charm) Bring tactical communication to a whole new level with the Ghost Operator Skull Charm ! This detailed charm for Crocs,…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
I needed a simple and easy printable handle for my speakerbox. All handles I found had just 2 mounting holes on the side or had to be printed in more parts but I wanted a third hole in the middle for extra stiffness and a easy-to-print…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
This system is designed to be permanently fitted to a garden water butt, to allow excess clean water (for instance, from a kitchen tap while waiting for the water to heat up) to be easily poured in and reused in the garden. It is…
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
Synček je v 2 ročníku ZŠ a zrovna preberali hodiny. Tieto môžu slúžiť na nácvik, ale aj ako počítadlo skóre pri rôznych hrách. Všetko okrem hriadeľky a závlačky som navrhoval pomocou https://www.tinkercad.com/ Hriadeľku a závlačku som si…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
I've made this to replace the carboard structures tiles for the Weird World Wargame “Dust (Tactics) 1947” The model is 93mm x 93mm x 83mm, so it should perfectly fit in the squares. I've printed the model with an 0,6 needle at layer 0,3…
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for one variant
As a stout-hearted dwarf from Deep Rock Galactic, I couldn't find a keychain for my favorite brew, Smart Stout. So, I took matters into my own hands and crafted this 3D model in Blender, with multiple layers for easy color shifts. I…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
A simple waste bin from a 3D printer. The basket can be easily pulled out and hidden again. The basket can be easily removed and emptied or the bag replaced. The size is adapted for bags with a wide of 17cm or 20cm . Just stick it under…
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
Created in Tinkercad. Replacement for a lost battery case for for Lancer Tactical M4 (LT-19 Gen.2) airsoft rifle for my son. This 15cm long version fits with the butt-stock in the two furthest positions. Printed in PLA on Prusa Mini+ with…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
A large and robust funnel, designed to last a long time and to feel good in the hand. This should be easily resizable for your particular needs and application. I designed this to fit into my water butt pipe system . It was created to be…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for PETGSource material: PET
This axe is designed to look good and be pretty durable. It is suitable for throwing. Its not very big and have a hole for a paracord so you can attach it to your backpack or somewhere else. Please note that for printing this axe you need…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
Furnish your home with style with this modern piggy bank to store your coins. Impress your friends.
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
This design is based off of the concept by Zeiphon on Thingiverse . The idea here is you keep your unused tokens somewhat hidden, keep the spent ones out in the open, and secretly choose your tactic, place it under the cap and reveal. I…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
I have been missing a plug for the table. I dont miss any more
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Deckel mit Griff für Gießkanne 0,5l von Haws . Der Druck erfolgt "print in place", die Ausrichtung sieht man in der 3mf-Datei. Translation: DeepL Lid with handle for watering can 0.5l from Haws . The print is “print in place”, the…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Info ------------------------------------------------------------------ This is a rack mount V1 (without an top lid) for the Philips Hue Bridge (V2). I used ShapR3D for modelling. Choose your Version (right or left). Please use 6mm screws…
Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant
The medium tactical cruiser was one of the playable ships in the now defunct game Dreadnought. Medium Tactical Cruiser Tactical Cruiser are support ships that can render in-battle repairs. The medium tactical cruiser, built by Oberon, is…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
DISCLAIMER: THIS IS FOR AN AIRSOFT GUN AND NOT ANY REAL WEAPON Requires a typical spring from a ballpoint pen. Printing recommendations: PLA/PETG (I used PLA+) 0.2mm layer height 80% infill 3 walls Tree supports ONLY for the catch flap…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
IKEA PAX Mouse Holder – Stylish and Practical Accessory Storage Keep your workspace clean and organized with this custom-designed mouse holder, perfectly compatible with the IKEA PAX wardrobe system! This holder allows you to neatly hang…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
This print is designed to see if text renders well with the specific filament and shows the chemical formula its plastic is made out of
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
I added holes of various sizes because everyone likes that You need 6 - 6 mm X 3 mm neodymium for each blade of awesome Enjoy this ultra engineered magnet slider fidget. Put a pause in your slicer and the right height or use the supplied…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Aktualizace 15. 10. 2026: přidány soubory pro dvoubarevnou variantu (Prusa XL 2T) a tiskové soubory bgcode, doplněn seznam filamentů a nstavení tisku. Geometrie kostky se nezměnila. Hrací kostka na osobní zájmena v němčině: ich, du,…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Battlestar Galactica : Viper Mark I 1980's
Print approx. €7.66–€9.36 excl. taxPreliminary estimate for one variant
An minimal yet elegant combat Karambit knife. The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
OpenVessel 2.0 is a redesigned benchmark model for testing your 3D printer’s capabilities. The original was scrapped to make this version unique and functional without resembling Benchy. It’s simple, effective, and even floats upright in…
Printable without support. Holes for microphone included. Filament need 12m (2 perimeters 15% infil). Versions A, B, C, D, I, J, K, L, Q, R, S, T…..For phones with cover, max phone depth 21mm E, F, G, H, M, N, O, P, U V, W, X…..For phones…
Stop it! Yes, I'm back with more bad puns and a useful print. This practical, easy-to-print design was something I threw together in Fusion 360. I didn't want a Hodor (sorry) or a solid doorstop. Instead, I wanted something that would…
UPDATE 11/14/2023 added nemmie and henry and gave some sub text UPDATE 10/1/2022: added octoberfest mugs and did some sorting creator notes: I am still working on this and I get very busy with work irl so please be patient. I have since…
Fits a Zyn can, but I don't know what other tins it might fit, let me know if you want another size Zonnic Tin/can sizes added (5.2mm wider) - 12/18/23
🐾 Black Cat Bag Clip – Playful and Practical Add a touch of humor and charm to your kitchen with this whimsical black cat-shaped bag clip! Designed to seal bread bags and other packaging with a cheeky twist, this clip combines…
If you are one of the billions of people who keep their toothbrushes in a cup, put this functional model in your print queue. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a…
This is an isometric practice worksheet with matching 3d models. The models use ¼" as 1 line length on the worksheet. The model “all isometric shapes” has them all within a 4.25" x 4.5" box. I included a STEP file of the group if anyone…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Sell unique, stylish, and modern 3D models with a commercial license – no restrictions, full freedom! 💸 Why…
The PrintBone practice mute: A practice mute for your trombone, bass trombone, flugelhorn or trumpet that is compact, plays with little resistance, is light and sounds well. The partials are in tune and it is quite silent. I let a few…
My airsoft vest is great for me, but storing it is quite a pain because you can't really just hang it somewhere on a normal coat hanger or lay it flat without it taking up a huge space. So I took to the drawing board and made the TVH…
B.B.B.B - Locked, loaded, and scaled to perfection! The BIG BORE BULLET BOX is a 10x upscaled replica of a real 9x19 mm cartridge, precisely engineered down to the hundredth of a millimeter . Every radius, angle, and dimension has been…
Remix of the Zyn Tactical Snus Holder from @JacksonSediv_1247627 Fits a Velo can, but I don't know what other tins it might fit. Tactical Swedish Snus Holster for Velo's. Can be attatched on a Tool Belt or Pants. Does require supports,…
Wanted to make a helldivers cosplay for comic con, found this great model by ZerekMasters that looked perfect. However it had some problems like too many polygons and other misc. errors. Fixed the models up in OrcaSlicer and sliced them…
There are many suggestions on what a good box for metal drills should look like, but none of the ones I found had all the requirements I was looking for. It had to be a simple design, with clear indication of size, small drills from left…
I had seen the movie Captain America Civil War with my boys and really like the sinister look about this mask. I was originally going to do a couple for my sons to go paint balling in. But I needed to do a little more research on the eye…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE January 1st 2024- Added 2 styles of internal trays.…
!!WARNING!! I am not a structural engineer! I am making this sh!t up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
This is my variation of ANicolai's “ Mute for Violin and Viola .” Printing in various PLA+ as oriented without support. .16 layers, 4 walls and 80% infill. We tested these against an actual an metal practice mute. It actually stacked up…
Introducing my meticulously designed 3D model holster crafted specifically for the Ruger Mark 4 22/45 Tactical with a 4.4" barrel . Precision-engineered, the holster is molded to perfectly fit the contours of the Ruger Mark 4 22/45…
This is a remix of www.thingiverse.com/thing:5140166 I separated the handel from the mug to allow for the multi colors I wanted to do. I also filled in the center to make a 12oz soda/beer can fit nice and snug. ROCK AND STONE!!! Print…
Here is a practice fishing plug. Print Settings Printer: Ender 3 V2 Neo Rafts: Yes Supports: No Resolution: .02 Infill: 100 Filament: NOVA Maker ABS Orange Notes: If you print at 100% it will be approx.11 to 12 grams which is about 3/8 of…
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
Model improved from my previous iteration
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
Fixed the height of the Monster can with the “Fixed Height” Files.
This is the logo for the Galactic Empire from Star Wars. I've included 4 models: Standard Logo Logo with background Logo with angled sides Angled logo with background As always, I am open to suggestions on how to improve my designs, so…
Based off concept art from @gc_conceptart this is an envisioning of the classic Galactic Armory logo with a Halo Spartan helmet! The faceplate is able to be removed with the help of 10mm x 3mm circular magnets. Includes both assembled and…
Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP Probably works with some other Vortex scopes. I redesigned a bit the zoom throw lever by NJ_v_N. Added 3mm threaded insert, elongated the lever. Print Settings Printer: Printo3D…
Tired of constantly tripping over swords, or looking at that pile of swords laying in the corner? Look no further for your sword management system then this wall mount for swords! Print instructions Supports are needed.
This military-inspired pen holder is designed as a tactical vest, combining a strong, disciplined aesthetic with everyday desk functionality. The model features clean, solid geometry optimized for easy 3D printing without supports ,…
First, congratulations to Nigel Buckle, David Turczi, and the Mindclash team for this incredible game. It checks all of my big, heavy, space game boxes for both solo and co-op play. This insert took my brain by storm. The game trayz do a…
Classic untextured Hoffman Tactical grip 3.1 with a simple beavertail mod. Fits all AR grip mounts that are Milspec. Requires supports on the beaver tail and some sanding. Fuzzy skin settings; thickness 0.1, point distance 0.5.
I couldn't find a Battlestar Galactica model from the new series on Printables, so I thought I would bring them to you from Thingiverse. I printed this great model from EDY209 on Thingiverse a while back. I also used the fixed parts by…
This is a rip of DRG source models, with the canister tanks filled for printability. I've included the source obj files in case you want to play around with positioning. If you plan on printing this, I suggest using 3D Builder or a…
Knee/Shin plates for the right leg, mirror the model for the left leg. Model ripped from the game and cleaned in blender
Tactical unicorn horn on a NVG mount so you can show every one that your a VERY SPECIAL soldier… The Tactical unicorn horn will make sure you never run out of ammo and you become invisible…… OR maybe NOT!! I dont know ;) Small model is…
Another tactical rigid MOLLE Panel. I add some hole in the panel to set something with paracord or mini-bungee. And a lateral fixation hole to couple more than one panel. The 4X3 fit in a Ender3 with something like 18x19cm, and for…
IMPORTANT: A few people in the comments have mentioned that Mood made some changes to the trays in the second edition release. These organizers will sadly only fit in the v1 deluxe version of the game. First time upload, first time using…
12 ga 2.75" Practice round, dummy shell If you want to use this to practice loading i would print with a heavy wall count like 2.4mm, no infill, then pause it right before it prints the top and put some weight in there so it has the same…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
I recommend printing with durable filament. PLA will still work but might wear down or break after time. If you liked this model, be sure to check out my other models.
Pencil holder shaped like a TIG torch to help practice, or just to show off how much you love welding
I took BlueFalon1066's remix of SeafoamFabrication's model of Deep Rock Galactic 's Buff Beer Mug. I split the handle into two pieces for easier printing and included pegs to keep them aligned when gluing them in place. I also scaled up…
Battlestar Galactica Colonial Raptor. I couldn't find any models out there, so I took one from the game Diaspora. I extracted the model from the game, chose the highest detail mesh, converted it to stl and fixed the surface problems in…
Tactical Inspired Airsoft Mask Enjoy Category: 3D Printing
