Counting matching models…
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…
FLEXI HEADCRAB This little fella is derived from my popular Flexi Sloth . The teeth are quite hard to print and attach (use blue tack or glue) and thus are optional. It looks good without them too! PRINT PARAMETERS Material -…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
Update #4: If you want no play at all I (and other users) recommend scaling Z in the slicer to 104%. Especially if you have vibration motors on your pedals this will eliminate any play or rattling. Update #3: Some tips and feedback from…
Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…
HyperX QuadCast Boom Arm Adapter 5/8 inch adapter to attach your HyperX QuadCast to mic boom with 5/8inch screw
This Jax-inspired articulated flexi figurine is based on the character from the animated web series The Amazing Digital Circus . With his tall bunny ears, wide mischievous smile, long segmented limbs, and bold purple-and-pink color…
As I've not liked the short travel of the brake pedal, I've created an elastomer replacement. I've printed it in different hardness TPUs with 4 perimeters and different infills with a 0.4mm nozzle and replaced two of the original…
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Prints with no supports, if yours is fused too hard to break loose, try the extra tolerance version. 4 rotors spin, arms do not pivot. Depending on your settings, you might have to POP them loose the first time. Also available: Original…
Prop guard for your 5 inch :) Holes on the sides, if you want to add rigidity by printing connecting rods. Mirror to get the other side. Some frames have the motor mount holes angled relative to the frame, if so let me know. Category: R/C…
Case for a Raspberry Pi 4 with a HifiBerry DAC+ ADC or HifiBerry DAC+ ADC Pro hat. Designed in OpenSCAD. With the provided OpenSCAD files, it is easy to modify for other HifiBerry models. Comes in three variants: one with a print-in-place…
My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking. This mod will make the braking more linear and less stiff overall which is what…
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH
Enhanced LRM20 missiles Wolf head decal in cockpit Raised and lowered features. Cut the model in parts Added magnet holes for torso twist and arm rotation.
A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand. The model I based this off had the majority of the weight resting on a very…
Cut the headcrab model into 8 pieces so I could print one life-sized on my Ender 5 Plus. I forgot what I scaled it up to. Aim to make it about 2 feet long from front leg to back leg. I painted it with regular old rattle cans off the shelf…
IGNORE this version, we're onto V3 already! These have since been superseded by my second generation design , but for posterity I'm uploading it here so we can see how terrible they are compared to the newer ones. Also, here's the first…
Printed with 0.4mm Nozzle and 95 A Shore TPU, 0.15mm layer height. Camera mount allows for 4 different mounting positions depending on hole used and orientation, which is a millimeter more to the front or to the back compared with the TPU…
I realized that if you lose one piece, the whole game is useless. So when I took it on a trip with 15 kids I got very afraid and was looking for replacement pieces here. This configuration of adcurtin 's script works good enough for me…
Fixed 5mm height instead of 6mm and T-mount for bi-blade. Originals by STRIKING FPV
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
apologies for the bad models they are ai generated
Leave behind a breadcrumb trail with this tiny bookmark. Features Minimal Points right to the last line you read within the page. Bookmark accommodates larger and smaller margins, by reversing clip side. Includes a punch out card bookmark…
Just the 4 grams less headcap you'll need 3 m3x4x5 heatinsert nuts Print with supports, but not in the hexagon holes :P Added a V2 that is sturdier, v1 broke on me:P
Since the height under the brew group is limited, I designed a space-saving adapter to hold the loadcell. It is easily printable without support, ideally made of some temperature resistant material. As the Silvias have slightly changed…
Update of memyself s nice rancilio-silvia-loadcell-mount model: The mount is slide-on so it doesnt move on the machine (no glue needed) I modified the holes for flat/countersunk screws The tray holders are slightly thicker and can now be…
This is Bubble from "The Amazing Digital Circus" as a Penholder
This space isn't enough for all the things i need to say, that's why i uploaded a pdf with the full description, go to “other files” then download the “FULL DESCRIPTION” .pdf Made with both Nomad Sculpt and Tinkercad, and all the effort…
Some low poly drones, I've included editable blend files with the mirror still enabled (blender3.6) feel free to modify them. Of course stl files are also included.
Quad-X Drone: Versatile Quadcopter for Racing, Surveillance, and More The Quad-X Drone is a multi-functional quadcopter designed for speed, stability, and versatility. Whether you’re racing, capturing aerial footage, conducting…
UPDATE February 05, 2017 Minor fixes in the STL's. UPDATE November 12, 2016 All frames have been update with improved propeller clearances. (5mm Increase). Enjoy! https://www.youtube.com/watch?v=zlCR2uV0GjE (Video from deDrones) Thanks…
mine have been made out of overture black super pla+, working like a charm ever since.
un chassie relativement simple a réaliser mais plutôt efficace! ci vous avez des question, posé les moi dans les commentaires.
I found the height of the QuadCast on the stand to get in the way of my monitors. This makes the overall height much lower, and allows for more clearance under the stand if you want to bring it forward under your keyboard. Uses all the…
A newer mod for my G27 pedals, but should for any Logitech pedals. They are in need of update, I saw now that Shaun Hutchinson G27 pedal model is not at all accurate to my G27 pedal set. Maybe there is a difference in between the models?…
Headcrabs are sac-like creatures, the size of a watermelon, with four limbs that allow them to jump up to 3 meters in an
I bought Sue a second battery for her Rad Power Radcity Step-thru 3 (2021) eBike. I needed some way to attach it to the bike. I designed and 3D printed an adapter that mounts to the rear bike rack to hold the battery. You can lock the…
I designed this to rescue quadcopters / multicopters from trees. You will have to make it heavier somehow so that it flies better. The V2 (green in the pictures) has holes in the front where M5 screws and nuts can be used to make it more…
Originally I wanted a Quad design that would fit nicely on my newly assembled Prusa-Mini. (Love it) However most of what I saw was really uninspiring, not particularly durable, and far too heavy. Thus I set out with the following design…
Its just drone frame with legs. I printed this on 30 x 30 cm table soo it can't fit your table. Make sure that fit.
3D Printed Cryptex fitted together with 2 M3x50 bolts into 2x M3 HSTI set into the Closed End Cap.
I lost the mount adapter for my HyperX Mic, so I've designed a replacement piece
Protective side plates for the GEPRC/Clone Mark4 5 inch quadcopter frame. Comes in two different sizes to accommodate ESC wiring, blank side and USB port versions, and versions that have extra room at the rear to accommodate wiring…
This design is my prototype to foldable drone for my DJI Naza V2. Foldable Drone V2 is under development. It has minor design flaws which I will fix in V2, but for now it's printing pretty nice and the drone looks cool. Folded without…
Hello folks I was looking for a caged frame under 100mm for interior/exterior FPV and could not find one, so I designed my own. This frame is designed for 20x20mm FC and ESC mount and for 19/2035 propellers, this is a 96mm class frame…
Loadcell 20kg https://aliexpress.ru/item/32864971873.html?spm=a2g2w.orderdetail.0.0.5acb4aa6sFZMfr&sku_id=12000036725071811 5 walls / 5 top/bottom GitHub: https://github.com/vazhure/loadcellhandbrake Assembly video:
Cushioned TPU feet for the GEPRC/Clone Mark4 5 inch quadcopter frame. Comes in a variety of sizes and can be slipped on and holds itself in place, but I recommend using a small ziptie to prevent it from getting knocked off during crashes.…
The cards I purchased only came with the low profile brackets as standard so I designed these in Fusion 360 as replacements. These print laying flat and both the PCB mounts and the stiffening brace fold back into position after removal…
Never drag your payload again! This set of 3D models are a direct fit for the original landing gear that come with the SK450 from Hobbyking (or elsewhere). They use the same mounting system as the originals, so they require the use of the…
As the name suggests, this is a 3D printed quadcopter. I am assuming you have some experience of building a RC machines if you are attempting to print this, so this will not be an inclusive tutorial. Printer Parts You Need: Antenna Mount…
Frame inspired by TBS Oblivion and Dave_C_FPV "The Micro Oblivion II" The main reason to create frame with support for wider stack mount types and a bit stronger. General notes 3 and 4 inches propellers support for stack 16x16, 20x20 and…
I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated them together. I also made the top plate 3mm instead of the original 2mm to add additional strength. There is also a file…
adapter to attach your HyperX QuadCast to mic boom with 5/8inch screw
Just a merge between two great models from Thingiverse. Functional metal free headcrab bottle opener. All credit goes to these guys: Bottle opener Author: https://www.thingiverse.com/skimbal/designs Thing:…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Disclaimer : This frame was designed at the beginning of 2020 and files migrated…
UPDATE 28.6.2016: I've been busy last few months, hope to find time for this hobby and to finalize this project page Motor mount holes are rotated 90° in ARM_ALT.STL X550 is a Work-In-Progress - here's my To-Do list: upload some video…
Disclaimer: this is only a first look into this project, we´re midway through the developement. We decided to publish in such a early stage to collect as much feedback as we can. Speaking of me, the publisher, this is the first bigger…
This collection comes with a base plate that mounts to screw holes on the top of the F450 frame. Additional plates can then be stacked using common m3 spacers as seen in the photos. I use m2.5 thermal inserts for all screw attachments. -…
I added keyrings, scaled it down, and then BOOM! Keychains. I recommend printing on red ABS.
This is a remix of JAM3ZS Quad wall mount. This remix removes the screw holes for those that would like to use command strips in place of screws.
Wall mount for quadcopters/drones. Suitable for most 3"-5" frames and even a transmitter. The transmitter one is slightly narrower for a Taranis but would probably fit most models. OpenSCAD files included so you can modify it to suit your…
Basic frame for brushed DC motor (7mm) quadcopter with 30.5x30.5mm controller. holes supporting M2,5 screws. Frame consists of a base frame to mount the motors and controller and an extra mount for battery & accessories. Use appropriate…
Accidental bumps changing the gain has gone too far! No more. Just print this and slide it over your gain knob
Silhouette of Bubble from The Amazing Digital Circus. To be hung on the wall as art. I use double sided tape to mount, and it works well. Uses less than 20g of filament and is about 1.25 mm thick. You can scale it's thickness up, if you'd…
I like dudufreeride wall mount (https://www.thingiverse.com/thing:4342345) for displaying quads on the wall, but I wanted to adapt it for using it with the Ikea Skadis pegboard system, so I took the original design as a base, removing the…
Thanks to pefozzy for the base model! The props have been changed to dual prop - same internal hole diameter as the original so the pins can bit fit and glued in the same manner. The image shows glow in the dark props (kids found it fun).…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This is a generic quadcopter model intended to…
"TinyTank" This is a prototype monocoque 4S 3 inch racing / freestyle quadcopter design with all the components (FC, VTX, wires, battery etc.) fitted internally. Hardware - M2 countersunk bolts (x4) & M2 nylon nuts (x4) The FC and VTX are…
simple stand for madcatz sfiv te stick.
This is a debit card sized storage solution for your needle and thread. This way, you can put your basic sewing tools safely in your pocket. There is room for 4 different thread and 8 needles. The threads can be secured with the small…
Rear antenna mount for the GEPRC/Clone Mark4 5 inch quadcopter frame. Accommodates a SMA connector, 25mm GPS antenna/module, and RX antenna(s). There are two versions, one with a single RX antenna, and one for 2x diversity RX antennas.…
CREDITS TO MALIK RADWAN FOR THE MODEL! CREDITS TO GLITCH FOR THE LAST IMAGE (and the whole show) This was one my first times ever posing a rig, so it is most likely not extremely accurate, but it seems pretty close. When you import the…
This is a mold for vibration dampeners. Get some molding silicone an pure some dampeners ;) Here I made a video where I show you how I did some for my miniquad. Have Fun ;) Instructions Choose wich size you want and print 2 mid pices and…
You can use this to hold 2 LED's and mount it on your quad. Low profile and light. More cool stuff @ http://www.plastibots.com This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/aYbwqSqHA3W Category: 3D…
CinePUNK 3 (inch) modular cinematic quadcopter frame space for second stack (fpv camera board) easy to repair/print by modularity, limited supports used 16 x M2 screws for assembling (no other parts required to fly this) USB plug…
A very long 10 inch fpv quadcopter drone leg.
Gedruckt mit Ender 3 V2 Nozzel: 210 Bed: 60 Speed: 50mm/s Infill: 40% Gyroid Material: Geetch PLA
A simple non intrusive design for implementing a load cell into your G2X pedals. I would like to thank Shaun Hutchinson, for his G27 pedals design. Which allowed me to make a quick mod for the pedals. Logitech G27 Pedals I personally use…
Love the light headcap to match the light cooling fan duct. BUT I wanted a spot to put the bowden tube when I am printing TPU... yup... remix time ;)
Information: This is an experimental propeller design for 5 inch quadcopters. I have successfully tested it, printed from PETG, but would not recommend it as replacement for regular propellers. These are a lot louder, more fragile and…
Version 2 of my FNQ220 (Foldable Nano Quadrocopter) After 3 years of field testing and several own builds with different configurations, this is the V2 (file version V.39) with a lot of features, bugfixes and improvements compared to the…
Even Xen aliens celebrate the festive season! To go with my Half Life 2 Headcrab hand puppet , I made a HL2 themed ornament; a headcrab trying its best to couple with a snowman. Well, seems the snowman doesn't take too kindly to the…
Remix of the original model, but for load cells with a 10mm screw distance (instead of 15mm). I found my load cells had different screw distance as well as differently sized screws, which varied from the official Gagguino…
Just simple case for rpi zero, Sony IMX219 sensor and AR9271HP WiFi card. Category: R/C Vehicles
Benchy as a quadcopter drone with spinning blades. It is a little shorter and wider than the standard Benchy. No supports required when printing. Two versions available (.stl & .3mf files available.) Quadcopter Drone Benchy. (One-piece…
Use Tinkercad to help create Designs.
You can print this model if you own a Maginon QC-710SE WiFi and need a replacement motor cover for your drone. I suggest using any clear filament so that the printed part won't block the LEDs from the drone. Do you like my models?…
The PH145 quadcopter was inspired by the RS90 and DJ105 brushless quadcopters. The RS90 looked like fun, but the DJ105 wasn't much bigger and produces a lot more thrust. The DJ105 uses 2.5 inch propellers, and I quickly learned that these…
Metal fork propeller pullers are difficult to use and results in the risk of broken or bent quadcopter components. This 3D print requires user to pull along the axis of the motor shaft, so no bending occurs. Device is pressed until hooks…
I'm giving you a base parts of my very first complex quadcopter model. It really works. The main advantage is the cover of the propellers. Feel free to use this model and remix it. Just remember to licence settings.
This model is a replacement for the stock top plate that comes with the s500 frame kit. It includes vibration isolation for an autopilot / flight controller board and provisions to mount a raspberry pi companion / flight computer for…
Wall mount for race drone. Version 2 is a little bit more beefed up Category: R/C Vehicles
