735 models
The pupils listened to a lecture about schools in Africa, where they learned about what children in these schools lack. They decided to model and print simple teaching aids for mathematics.
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
This is a modified version of the “roller plate” 3D-printed part for the Adafruit Heat Set Insert Rig (https://learn.adafruit.com/heat-set-rig). The BOM for the rig calls for “3x 625Z ball bearings with wheels” from Amazon (…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have an African Zebra for you for a diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If the figure…
Print approx. €2.47–€3.01 excl. taxPreliminary estimate for one variant
I needed a something to keep my PyPortal Titano steady. I also wanted to keep components and pins from potentially shorting out if I set the Titano down on something conductive. I wasn't happy with my designs for a full case so I came up…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to give the RP2040 a try as a logic analyzer and the Scorpio is a prime candidate due to the 5V tolerant pins (as advertised by Adafruit on the Scorpio product page ). But I didn't want the Scorpio flying around my desk with the…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Low cost (0.10 $US) Enclosure for Adafruit VCNL4040 Proximity and Lux Sensor to allow for handling, use and mounting of the sensor.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
A Perma Proto Board from Adafruit was used to simplify connections to a Raspberry Pi that served as an Octoprint server for a Prusa i3 MK3S 3D printer. Rather than have the Perma Proto Board dangle in space, a simple case was created on…
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Vytvoření puzzle hry s jednotlivými Africkými státy
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
This is a 3D print to accommodate a breadboard to help program an Adafruit QT Py RP2040. I placed the controller 7 PINS from the right of the side of the breadboard. The large labels helps to identify which PINs are what. In the STLs,…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
As voor de Sencys (Praxis) houder voor afplaktape + afdekfolie 1,1m x 33m
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Overview VersaFrame is a modular photo frame system designed for life's ever-changing moments. Whether displayed in portrait or landscape orientation, the VersaFrame adapts with ease. The Standard Edition comes with a clean, minimalist…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
VersaFrame - MOM Heart Stand Edition Celebrate Mom with this heartfelt base for your VersaFrame modular photo frame system. The MOM Heart Stand Edition features bold serif lettering with a cutout heart in place of the "O" — a perfect…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
5pcs Hexagon African wild animals Wall Art
I didn't find a mount for an Adafruit ADXL for the stealthburner which has wider holes so I created this one. You will need 2 M3x60 screws for the mount and 2 M2x8 for the ADXL itself and 2 M2 nuts. I hope it's useful for someone else ;)
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
Added text/symbols for Power / HDMI / ON as mine is at floor level so awkward to feel for small ports. Added slots for blower fan to vent out end of top case Chamfered SD card slot for larger fingers + thumbs Increased Extrude depth of…
Update: Added 3 versions - One with a hole for the STEMMA port, One with a hole for the STEMMA and Reset, and a last one that has space for a Pimoroni trackball. This is a form fitting case I designed for the Adafruit Macropad. Its…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
African Elephant Bull A note about my 3D printable figurines Over the years I experimented with creating 3D printable figurines, including a workflow that involved posing and adapting stripped game assets. It was an interesting phase of…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
This is a case for the raspberry pi 4 with an adafruit 3.5 tft screen. In the bottom of the case, you can use a noctuna fan NF-A4x10 5V. I used a 5V fan, so I can use the voltage of the USB port. The bottom and top is clicking, no screws…
A case for the Adafruit ESP32-S2 Reverse TFT Feather. Uses four to six m2x10 screws. https://www.adafruit.com/product/5345 Also included a battery case. https://www.adafruit.com/product/3898 I've updated both back plates to have better…
A bracket to allow the Adafruit ADXL345 to mount to the mini-afterburner in order to do pressure a advance. This designs uses m2 nuts and bolts to secure the Adafruit ADXL345 board to the bracket. and you'll need m3x40 bolts in to mount…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
The African buffalo (Syncerus caffer) is a large sub-Saharan African bovine. The adult African buffalo's horns are its characteristic feature: they have fused bases, forming a continuous bone shield across the top of the head referred to…
64x64 LED Matrix Grid If you're printing yourself don't use this model!: This is is a really really slow path to printing these since slicers aren't optimized for grids like this. A better option is: Create a 192x192x6mm solid box (or…
YouTube: https://www.youtube.com/watch?v=jy7a-z19UEQ NEW UPDATE April 8, 2016 – Added new parts for Adafruit 2.4" TFT Feather Wing This is our 3D printed case for the Adafruit Feather. It’s for anyone looking to put their project in a…
This model is compatible with the lego system.
Download this free 3D african gray parrot model in 3MF format.
This is a small case for all 0.7 x 1 inch adafruit boards. The case is very delicate, please print with high details. The lid is not designed to be constantly be taken apart, the clips will wear off very fast. The board fits snug inside…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
3D printable enclosure for the Adafruit Macropad PCB, inspired by the Nuphy Halo 96 keyboard. Needed: 4x M3x8 screws Adafruit Macropad Print: Print all 3 parts facing down (as shown on pic), only the PCB bracket need support Assembly:…
I've printed a custom fan duct for my Ender 3 V2 and I didn't want to re-print everything just to mount the ADXL onto it. Instead I got highly inspired by this drag chain mount. I designed my own based on this simply because I liked the…
license disc holder for South African vehicles inside the vehicle on the window
The Story Behind The Mask: In ancient times the Masaai people were prolific warriors who struck fear into the hearts of rival tribesmen. Their warriors dominated the landscape, commanding respect as they overtook villages and laid the…
I can't find any decent enclosure for Adafruit 3.5 PiTft with Pi 3B. So, I decided to make one. To display MagicMirror stuff like weather, news feed, upcoming calendar events.. etc on my desk. You can find more information about…
Join here to get access: https://www.patreon.com/kogi3d Hey everyone! A brand new design is now available for you – a detailed Giant African Snail model designed for easy, reliable FDM printing. Perfect for adding a touch of nature to…
Africa puzzle Each part has its German name 3D extruded onto it. It's roughly 45x50cm big. I included the source file into it, so you can remix it, in your respective language! Print Advice Print some test pieces and see how they fit…
Public domain Ancient Nigerian mask by Legendjnt . Originally uploaded to Blend Swap . Exported STL larger than the blend file.
This print houses a single Adafruit QT PY board with USBC connector. The top snaps shut and has two button cutouts to allow you to press the reset / PIN9 button. It has a small slit in the back for cables - I use it to wire in external…
A cabinet enclosure for 64x64 LED matrix (3mm pitch) with Adafruit controller. The enclosure is suitable for wall mounting. PLA-ST & organic support.
* Thanks for the original designers of both models.
ⵣ Welcome to North Africa! ⵣ This model is a little different from what we usually do in MiniWorld3D. Instead of a landmark or famous building, this is part of a series of objects representing art & design of the world . Together, they…
Klíčenka s logem Africa Twin. Tisk je rozdělen na dvě části, kdy pro výšku 4.1 mm je požadována výměna filamentu. Dobře vypadá varianta se spodním filamentem, který svítí ve tmě a černý vrchní filament.
These cases are compatible with the following Feather boards: Adafruit Feather HUZZAH with ESP8266 WiFi: https://www.adafruit.com/product/2821 Adafruit HUZZAH32 – ESP32 Feather Board: https://www.adafruit.com/product/3405 Feather ESP8266…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
This is pretty much the same as the original, just easier to print and with a modified soldering iron clamp to fit the [Sremtch…
A very quickly put together afro pick I created when I misplaced mine. I don't recommend using it on your hair if it is just PLA since the tongs are not very strong. I am curious if it will work better with a stronger filament.
This elephant statue emphasizes mass and texture while maintaining FDM-friendly geometry and a real-print appearance. Powered by MakerWorld – Image-to-3D https://makerworld.com/makerlab/imageTo3d
A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…
Adafruit's Circuit Playground Chess Get ready to play with the Adafruit Chess set! It’s entirely 3D printed and features players from Circuit Playground. In this project we’re using metal filament to 3D print the chess peices. This…
A TPU case for the Datafrog R36S Retro Handheld. There are two designs attached, one that uses the included foam padding found in the box that shipped with the device, and another that is fully TPU with allowances for the screen, buttons…
I Ain’t Afraid Of No Ghosts pairs a playful sheet-ghost silhouette with sweeping fabric-like folds and a confident pose, for Halloween displays or gothic décor. Curious about making your own designs? Have a look at Infillery’s creative…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
Krytka matice pro krk řízení Honda Africa Twin CRF1100l - velikost matice 32. Před zahájením tisku si zkontrolujte jak máte matici natočenou proto jsou zde dva modely. Jeden model má logo vůči vrcholu matice a druhý je nastaven tak že…
This project contains terrain maps of almost all Afracan countries. Countries not included are small island nations. Those are: Cape Verde, São Tomé and Príncipe, Mauritius and Seychelles. Note that Equatorial Guinea is devided into two…
Kingdom is like a pyramid: African Animal... kingdom Feel free to join my YouTube 'Channel if you want to see more of my cool projects or printer reviews https://bit.ly/2NonEXS Print Settings Rafts: Doesn't Matter Supports: Yes Infill: 15…
Africa Twin Honda - Keychain - Portachiavi - Porte-clés - 钥匙链 - Schlüsselanhänger Resize to adjust dimension All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave…
Printed with PLA filament: Silk Gold Silk Magenta Silk Red Green Glow
To implement in your CAD software.
About Ngle: These masks were worn during the initiation of new members into the group or while policing communities. They are crafted with wood, which is then covered with a layer of soft white clay that is called Kaolinite. Often strips…
Needed a way to attach my Sequre SQ-A110 to the Adafruit heat insert press, so I made these brackets for it. One is intended if you want to keep it on, and just screws in place. (use threaded inserts on the back piece of both versions)…
Public domain model of an African elephant by Jeff2207 . Originally uploaded to Blend Swap .
Took me few hours to make this map for my bae but here we go. Need to be glued together and hanged on the wall with double sided tape. Very fragile, be careful :) Print instructions You can use my settings with .3mf file or make your own…
This case for the Adafruit MacroPad is a snap fit enclosure and requires no additional hardware. Layer height 0.2 Should be sliced with “Detect Thin Walls” so the tips of the snap tabs do not make gaps in the side walls. If you are using…
The MCRN Scipio Africanus is a Light Frigate equipped with dual torpedo tubes and twin PDC emplacments. The vessel was designed and built by the Martian Colonial Navy to serve as a escort, boarding craft or patrol vessel.
I've created a small and simple case for the Adafruit BME688 sensor board for use with a Qwiic-Connector (no cut-out for the pins). I've printed it with Prusament PETG, not sure if other filaments will fit as PETG tends to shrink a bit.…
This enclosure was built to house a Sensirion SPS30 (particulate matter sensor) and an Adafruit BME280 (temperature, humidity and barometric pressure sensor) for an outdoor weather station. The goal was to have an enclosure that could be…
This is a simple snap case for the Adafruit OLED Graphic Display (SSD1306) (.96") 128x64 character OLED display or any similar .96 display. The design is meant to be small/compact and snap closed. Only the standoffs are exposed. The case…
This is the traditional African board game Kahala, Kalah or Mancala. Instructions can be found on Wikipedia: English: https://en.wikipedia.org/wiki/Kalah German: https://de.wikipedia.org/wiki/Kalaha It includes a case that can be used to…
Wall mounts for the Adafruit RGB Matrix Portal Series. 4mm (tested) 5mm (tested) 6mm (untested) Print instructions Print with wall side down, 0.2mm layer height on Prusa MK3S with 0.4mm nozzle works well.
I modeled this for my son’s African Bullfrog. I can see it being useful for a small reptile too. I printed it with PrusaSlicers fuzzy skin setting for a stone like texture. It is made to fit in the corner of the frogs abode.
I Love Africa Hueforge art Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab…
This semi-realistic lion statue captures the power of Africa’s most iconic predator while remaining optimized for FDM 3D printing. Visible layer lines and a casual desk photo style show exactly how the final print looks in real life.…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
This is a simple casing for the "Adafruit FT232H IO" board. The SCAD files can be downloaded here https://github.com/andimoto/case\_adafruit\_ft232h Assembling the case with 2mm or 2.5mm screws. Print instructions Category: Electronics…
Created a snap fit case for adafruit HDMI touch screen monitor. I wanted a case without having to install hardware. Printed supports on the notches in the case. https://www.adafruit.com/product/2260
If you want to use your Adafruit feather in any sort of automation setting you might want to mount it on a DIN rail. The standard DIN rail mounts don't really have good mounting locations for the Adafruit feather board. This print…
This is a set of holders for Adafruit IR Beam Break Sensors. I am working on version 2.0 to address too small of a hole to fish the wires through on the bottom of the right side one. You might be able to see, but I temporarily took a set…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Cute African Alligator Family, for a diorama or just for play. Very cute animals. It is suitable for coloring. My children absolutely love it :-). Important:…
A great Wall Art of Africa. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
This is a raw scan of a wooden sculpture at my home. The bottom is not level so for printing make sure you slice it a little off the bottom. I've never printed it so cannot recommend settings.
I bought a license disc holder, but it was difficult to get the disk out when it was time to replace it. The strip for the double-sided tape was very narrow and caused the double-sided tape to come loose after a while. I designed this…
(Will eventually upload a V2 that moves the iron up in the mount, that will reduce the leverage caused by the long soldering iron tip and reducle wobble.) You'll need two M3 (i used m3x5, of the type thats ~4mm in diameter) heat set…
I seriously just wanted to make a cool looking sword that was pointed out to me in the Fortnite loading screen named “The Ageless Champion,” and I remembered it from Transformers: The Last Knight. It looks cool. That is all. This is…
Model of the Webb Ellis cup with Springbok Logo and winning years. Model is approx. 24cm high, on my 220x220 build plate I orientated the model 45 degrees to fit. I printed in black SunLu PLA+ and sprayed gold. Ideally I would like to do…
My brother was renovating his motorbike and he wanted to also renovate the old plastic cap hiding the bolt (as seen on photo). So i designed a snap-on cap from petg. I had only orange PETG, so he had to paint it black.
Safran pour IOM voilier, axe 4mm pour Little Fellow modelisme
Best printed in ASA or ABS. Fits perfectly for the CRF1000L. Also needed: x4 M5 Nylock Nuts (DIN985) x4 M5x16 Screws (DIN912) x1 M4x12 Screw with shallow head (DIN7984) 03-Jun-2025: Updated model with a slightly smaller hole for the…
This is an enclosure for an Arduino project with an Adafruit Motor Shield V2 . I did print them roughly on a FDM printer, but the rods would render much better in resin. The pins made accessible on the top are 5V, GND, A0, for a pulse…
I needed a way to hit a key combination on my computer while not at my computer, so the Adafruit NeoKey Trinkey was perfect for that application. However, I needed to be able to mount the key, preferably with the PCB not exposed. So I…
A simple 3d printed box used for housing an Adafruit Ultimate GPS breakout board v3 with usb https://www.adafruit.com/product/4279
I remixed the original case and thickened it enough to allow for the fan to be mounted inside. I also added a ribbon cable tab below the Pi's USB connections. With the added thickness, I was able to pull the ribbon cable out vertically…
Modified Africa Trophy front bumper with larger winch mount to fit an RC4WD 1/8 Warn Zeon Winch.
A bracket for a 12V socket that can be bought online on auction sites. The bracket fits between the steering head and the air filter on an AfricaTwin XRV 750 RD07. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
