Counting matching models…
First model ive uploaded, probably the 3rd ive ever made. Not a cad pro, so please forgive me. I based this off a picture from amazon, using eyesight and a bit of maths. Both of which arent so good, so if its a little inaccurate i do…
lost your cap while refilling your car aircon? just print one. This is the M8x1 R134a System Cap, 13 mm. Downside: The thread is along the layer lines but as there ist no pressure and just a dust cap it'll work.
I have an airco with a 150mm exhaust hose and a 100mm “plug” to connect it to the window. A made a simple adapter to connect en 150mm hose to a 100 hose. step file included so you can change it if you want to. I printed them at 0.36 on a…
Updated parametric holder of egil's model. Features added: mounting screw holes can be switch off for mounting with double sided tape the corners of the cut-out section can be cut off (or not) to make inserting the remote easier the…
Phone holder with sphere console mount for Dacia (tested in Dokker, should be similar for Logan and Sandero). Printed from PETG on Prusa Mini + as three part kit. Top cover is glued to two bottom mounts. Foam stripe is added between…
Exhaust vent adapter for portable air conditioner, desgined around a "click CPAC1907-C" but should fit any unit with an outlet of 110x140mm and 3mm thick base. Suits a 100mm duct pipe
This is my contribution Remix from Major Hardware Deskfan, but with Laminar Flow. Lets start the Remote Aircooler competition! This is the 120mm Noctua Desk Fan Version This version is calculated to target a 2,5m target. For this the…
This is an adapter plate to retrofit a single DIN sized head unit into a vintage aircooled VW with dash trim. When I got my '74 Type 1 a couple years ago it came with a hacked up dash with a CD player shoved in it. I could have welded in…
Ventilation grille for a wall mounted hot air exhaust with 120 mm diameter. You can print the cutout template to get the correct hole size with a Dremel.
Combs to reshape the ac fins
The AirCowl is a 3D printable personal cooling system that transforms a standard PC fan into a comfortable, wearable neck cooler. Perfect for hot summer days, outdoor work, or anyone who runs warm, this innovative design provides targeted…
This Product has been updated to fix an parameter Issue for the connetion point with the conditioner. I also add a little addon part to fix the gap in v4 for the design issue. This had only to be used tu update the Version v4! The new…
I needed a 90 degrees duct to connect my air conditioning duct (150mm) to my ventilation system (125mm), without the use of excessive amounts of duct tape It fits on a mks3s+ build plate, well it kind of fits. :D I suggest you split it up…
I've had this aging (but fully working) Aircon unit in the garage for a while, the interface for the hose split and was unable to source a replacement so I've finally got round to designing a replacement. I've yet to fully print this (20+…
The cover and hose ring to add an intake hose. Only fits model EXP35U538CW!!!
This is a replacement backplate for a TFA Dostmann “AirCO2ntrol Mini” CO2 sensor that includes a separate compartment to hold a Wemos D1 Mini connected to the sensor's debug port through a passthrough slot. The ESP allows you to put the…
Needed an adapter for my argo swan evo airconditon for my wall vent. Print in PETG, PLA will become too soft from the hot exhaust air. PETG with a heat deflection point of 71c seems to be holding strong. But I haven't had my AC on for…
This is the exhaust fan for the Royal sovereign ARP-9009TL model, if you have any questions leave a comment.
I found a nice video on YT about a polycarbonate panel with a drilled hole for any 15 cm air exhaust. The missing thing were the parts to connect the hose with the panel. So there they are, modeled from scratch. I used the sliding…
This screw clip is designed to attach a sheet of plastic / perspex / plexiglass / wood to your window, so you can most efficiently use a portable A/C unit. Works with: -35 - 60 mm thick window frames Instructions: -backer nut may not be…
If you have a window vent like mine this box will let you attach the flex hose exhaust of your mobile air-conditioning unit to it. As the part is symmetrical you can print two, one as-is and one mirrored, and attach them together to form…
This three piece adapter set is designed to work with 100mm (4 inch) ventilation ducting. This allows you draw cool air from a window mounted Air Conditioning unit, transport it through a 2cm x 20cm gap and then back via 100mm round…
I lost the adapter of my airconditioner thats connects the hose to the outside with the device to get the hot air outside. So I quickly designed one, it's not beautiful but it does the job Category: Replacement Parts
Holds an Aircon Remote. One of ours was broken so designed this replacement. Openscad file is included if you need to adjust the dimensions for your remote. Needs support when printing. Print Settings Supports: Yes Category: Replacement…
Aircon Remote Wall Holder for Daikin ARC452A4
This particular portable AC model is quite rare as it seems to be a Costco exclusive and whilst Meaco do have other 12k Pro portable models they all seem to slightly differ to this. There's very little information about this model online,…
Modeled this to better connect an insulated air hose, instead of the standard air hose, to the hot air outlet. The threads are mostly there to add some grip, I have fastened it with some tyraps. It gets hot enough that PLA will deform, so…
Please. Print test print to check for fitment before printning and painting all 4 knubs I recomend to use as low a layer hight as possible, to make the sanding less demanding and time consuming. i used 0.10 in layer hight PLA And support
Mounting bracket for aircondition exhaust.
Wall-mounted AC remote holder with a 22x62 mm slot, suitable for most AC and TV remotes. Attaches with screws or double-sided tape. You can download the file and edit the dimensions using fusion or scale it up to your needs :)
I've made this model to hold the remote for the Mitsubishi mini split air conditioner. Print this with Support on build plate only. Optimized for a .6 mm nozzle. Printed with PLA on the Prusa MINI+.
It seems 130mm hoses for portable AC's are hard to find (in The Netherlands). Someone asked our company if we have the 130mm hoses. We don't. The man already bought a 125mm hose at the local hardware store but that didn't seem to fit. So…
3D Printable AC Drain Pipe Elbow Connector Keep your AC running smoothly and leak-free with this durable, 3D-printed replacement drain pipe elbow connector. Designed specifically for optimal water flow and longevity, this model is a quick…
Pretty simple.. Printed on a Mk4. Fits the collapsable 150mm ducting that seems to come with all such portable airconditioners. added a shell. Will glue it to my foam board ducting around the Condenser air intake. FYI, these hoses are…
Liked the idea of original model, but it was designed to be screwed in place. I needed to be able to disaassembly the mount on demand as it's a mobile airconditioner without any permanent wall hole. Inspired by the other remix source…
It was for a SunTec Portable Airconditioner. Inner diameter is 138mm but i can pressfit a 150mm tube inside it.
My attempt to create a WWI-era Airco D.H.4 airplane. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
You can push the pushfit rod into the case, maybe use some glue… I printed it with PETG (PLA should be fine also) 0.2 layer height 0.4 nozzle It could work also with Honeycomb storage wall via adapter . Credit Multiboard is designed by…
Just print 3+ of them and secure them to the spool by using zipties. There is a room for improvement, but idea works just fine. Designed in TinkerCAD, source is in files section. IG post: https://www.instagram.com/p/CLNAClxhb4G/
My take on a small table aircondition that uses water to cool down the air a few degreese. everything can be printed mostly without support. Only the tunnel need a little support in the hole for the container. Only the fan needs to be…
Are you like me and always use the timer on your aircon unit? Are you also always loosing the remote and spending a lot of time trying to find where you placed it? Well, here is something you will love! This remote holder has an opening…
Recommend to print with organic supports on build plate only.
I drive a '71 Brazilian 1500 VW bug. It was stock 1493cc with a single carb, but I did some upgrades to its engine (changed from single to dual carbs, upped the displacement to 1584cc and added Engle W100 cams). One of the premises I…
This adapter allows you to use potentiometer knobs Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 100 Infill: 100 Filament: PolyMaker PETG Category: Automotive
You just need to drill 4 M4 holes in the plate with which you want to “close” your window. Then print the part and attach the outflow tube of the aircon with the adapter. You should be well prepared for the next heat wave- no matter if…
The Classic Aircooled Coupe is a highly detailed 3D model inspired by vintage, rear-engine, air-cooled coupes with a custom restomod appearance. Featuring smooth, rounded body lines, a lowered stance, and a detailed rear engine and…
To replace the air vent and have a support for the telephone or other.
My org. wheel broke, so this is the replacement, Print Settings Printer: Voron 2.4-350 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 25% rect. Filament: Sunlu ASA Black Notes: The blue rims are printed in TPU. Try to shrink each X+Y…
I recently bought a portable air conditioner (This model: https://www.amazon.co.uk/dp/B0CP42SSZD?psc=1&ref=ppx_yo2ov_dt_b_product_details ), and was having some trouble with keeping the exhaust air from coming back into the room. The unit…
My aircon monoblock has a square hose adapter for the hot air exhaust. In order to be able to move the aircon but leave the window adapters and hoses in place, I needed another adapter. Maybe this is something you need too :) I printed it…
Wall adapter that can be used to fit an mobile airco outlet to a wallhole of 11cm. There is also a shutter to close the wallmount. The airco pipe can be easily removed from the wallmount if needed. Can be screwed in the wall with 4…
UPDATE: Adapter for 120mm hose! I needed a adapter for the exhaust air hose of our aircondition, because we have insect mesh in front of our windows. So i decided to create this simple adapter which will be pushed between the window frame…
A tiny window AC, good for dioramas but can use a TEC module Front takes 40mm fan + heatsink, rear takes another 40mm fan+heatsink Designed for a 30mm TEC IIRC (it has a 40x40mm space) sandwich fan+heatsink+TEC+heatsink+fan, push into the…
This vent is located below the HSI in the F-16. This is my print in place replica it should work right of your printer. Dimensions: There are two different screw dimensions those being 41.28*41.28mm and 42.66*42.66mm you should also have…
Wall mount for the tube from iiglo IIAC12000W aircondition Mount the wall mount and screw in the pipe. Use organic tree support - print in PETG cause moist air … you know
Hairnerd says “print your own at home”.
can not be from PLA because air temperature is to high
Airco Wall Feed through Protect your Airco connection lines thru the wall with this model. Insert the two parts from inner and outer wall and if necessary use some tape to fix the parts together. Splitted this model in 2 parts so you can…
Happy Printing No Support Needed
I dont want my remote to wander around the room. So i made a holder to fit the wall and the edge my bed above the pillow. I added the both files, which can easily be altered. Both were printed upside down with no supports. The name on the…
Could be used with this cabin style: https://www.printables.com/model/412034-tarra-trucks-cabin-with-slot-for-beacon This is just a part used in Tarra truck models. For full model kit please follow this collection:…
I made this as although I have a bought tool to split the front of the case that sits in the void of the oil pump, I always find splitting the case at the back to be a pain. Printers on a Qidi Plus 4, PETG and a 0.6mm nozzle. 0.35mm layer…
Outlet for Aircondition tube with 150mm diameter. Has thread, so you can screw the tube on.
DEUTSCH: Einfaches, schnell zu druckendes Ersatzteil für einen handelsüblichen Werkstattkompressor von Marken wie Rowi, Parkside, Güde, Workzone, Einhell, Scheppach und wie sie alle heißen mögen. Druckt es auf der Seite liegend mit…
Plug for the drain of a Sunctec Wellness AC
This model is a simple filter for your airconditioner condensate water pipe. For 16mm pipe! -0,4mm nozzle
When the printer and the camera asks more of your Raspberry Pi and its temperature rises, you'll have to cool it down to prevent throttling. So if you got a spare 2510 fan laying around like me, you can use it for cooling your Raspberry.…
Files to print (3 parts): 1. custom-bushing-150mm.stl - Wall bushing with M4 countersunk screw holes 2. exhaust-hose-adapter-150mm.stl - Hose adapter (bayonet twist-lock) 3. lid-150mm.stl - Cover lid for when AC is not in use Print…
Adapter at 25° angle for Howell mobile air conditioner exhaust duct. Needed to be able to connect it with lower part of the window in the way. Printed in PETG to withstand and maintain shape and strength under hot air exhaust.
AC adapter that allows the hot air from your electriQ (and others) to be expelled via the mailbox letterbox. I printed with tree organic supports in PTEG 35% infill.
A simple replacement blade/vane for the swing function of a B&Q Cyclone 12000 BTU portable air conditioner unit. Replaces blades where the top/bottom or the ‘swing’ peg has broken off.
Mounting bracket for the power switch on an AirConception Delta Paramotor Frame The standard mounting location is over top of the left shoulder which is almost impossible to reach while wearing the ParaMotor. Includes hole for optional…
Just attached with silver tape and VHB
Adapter for airconditioner hose of 125 mm diameter. Print without supports. Made to fit into a +/- 127 mm hole or larger. Can be screwed into the wall with 6 times 4 mm diameter screws. If you would like to see other dimensions please…
A nozzle to direct a fans flow laminar. It seems onto the fan with M4 nuts and bolts. NOTE: Also designed for printing upside down: One side has a few overhangs, the other one needs support. Choose whatever your printer can do better.…
Holder for Gree remote YAC1FB9
This model is a practical remix of a wall mount designed for the VanMoof S2 E-Bike charger. The wall mount has been extended with an additional holder for the Xiaomi Aircompressor, ensuring that you always have the essential tools for…
Wall mounted holder for Mitsubishi Remote. I used sticky pads to secure as i was unable to drill in to the wall.
This is a connector for threaded 125mm aircon outlets and flanges to mount it all to a board which can be placed in the window frame as a seal. I printed it in white PLA but if this proves to not be heat resistent enough, I might have to…
This is a holder for your Aircon remote or other similar sized remote. I designed for wall or cabinet mount with double sided tape. A flange on the rear ensures the mount sits flush against the surface with the tape invisible. The front…
Please leave a like and and consider posting a rating/make if you find this design useful! Use split to objects in the slicer to separate the screw cover. Not sure of the exact model of remote (I think it's the Daikin arc452A4), but if…
For a long time I couldn't find a suitable water filter for this humidifier. This repository is a open scad project, which implements the filter. Maybe other humidifiers have the same mount, but I don't know about they. Instruction of…
Needed a simple aircon holder, to keep my desk free. I attached it to my bookstand attachment of my nitori desk. The 3mm wall thickness seem to be stable enough for also heavier remotes. Possible Dimensions for Remote: -Length: 59mm…
Use M3 screws for holding the fans, from the outside. Electrical wiring: if you use 24v fans it's possible to connect them to the main power supply, as long as you are comfortable unscrewing and securely re-screwing the high power…
a connection between a 134mm inner diameter hose and a 98 mm outer diameter hose
I really love Aukey Aircore Series 2-In-1 Wireless Charger - it can wirelessly charge mobile phone and AirPods. But there were two problems: iPhone 14 Pro Max with a case didn't fit well - the brim around cameras interfered with the stand…
The CO2 monitor looked a bit too modern for my rustic night stand, so I decided to cover it with a rock shape. Note that it fits a CO2 monitor already upgraded with the Wemos D1 board.
The installers failed to attach the cover plate to the bottom of the outdoor construction unit.
my original mount broke so i designed this one
Mounting bracket for the power switch on an AirConception Delta Paramotor Frame The standard mounting location is over top of the left shoulder which is almost impossible to reach while wearing the ParaMotor. Includes hole for optional…
This printable piece is for adjusting the airvent on the tristar PD-3871E aircooler.
Because my house only has inward-opening tilt-and-turn windows, a lot of warm outside air entered through the open window. To solve this, I designed a letterbox adapter for my Inventum AC125W that replaces the standard draft excluder.…
Bracket designed to hold an LG AC remote.
Nissan Leaf Aircon Compressor Bracket for using the Leaf A/C pump in an EV Conversion. Two models are included. One includes threaded risers and could possibly be printed in an engineering material and used as is. I printed in PLA just…
Replacement corner intake grille for the Eurom Polar 16CH portable AC, with a 150mm hose collar built into the back face for external circulation or runoff. Every dimension traces to the physical unit: laser scan, hand calipers, five…
The FJX7 is a cracking bit of kit, but the remote holder it ships with is nasty imo and rattles. It's the only way to control the aircon, and it spends its life migrating between the worktop, the bed and the floor of the van — usually…
Portable aircons need a way to get rid of condensation water. This is usually done with a flexible hose draining outside through a window. This allows you to drain in a Gatorade bottle instead If your aircon has a 12 to 13mm outlet hose…
I also needed a simple aircon holder. Credit to Celvin’s model, it also happens to be the right dimensions for the Fuji Electric air conditioner I have here (it seems pretty universal), to help prevent the remote from drifting around in…
Louver to motor connecting part The motor opening is 3x5mm Total height is 16mm , length 17mm and depth 7mm Tested with ABS , fits perfectly
Allows you to plug in the exhaust duct from an Ecoflow or other portable aircon into the existing vent holes (normally used for hot air into the motorhome from the heater). The venting on my Rimor splits into many ports inside the…
