Counting matching models…
These bin inserts are for the Akro-Mils small parts organizer to allow storage of a larger variety of small parts without worrying about them working their way under the dividers included with the storage system. Step files included for…
I noticed that the AkroBin on my Hornady press started overflowing before it was filled to capacity due to the open area on the end of the bin. I made up a few designs to help with this: one requires some minimal supports (the standard…
The hangers that come with Akro-bins, and especially with the cheaper knock-off versions, are a bad kind of plastic which becomes brittle with age, so they need replacing, but most stores only sell the hangers along with the bins. I print…
This mount allows you to mount an Akro Mills Bin to the front bar of the Hornady LNL AP press. Stock Hornady bins are the 30210 models. Bin Mount Sizes Single Double (about 75% support of each bin) Double Longer (100% support of each bin)…
Akro-Mils makes plastic cabinets with plastic drawers for small parts. Each drawer has slots for one drawer divider. The typical cabinet comes with 64 small drawers, but only 8 dividers. The dividers are molded into the back of the…
Another pegboard-focused design for my workshop. I've got multiple Akro-Mil bins on my workbench with electronics and 3D print parts - this allows you to mount them directly to a 1/4" pegboard. Category: Organization
Clamp on / Quick Release Metal Detector Stand that fits the NOKTA MAKRO SIMPLEX+. No screws needed ! See pictures for proper attachment location. Infill can be what you like however I haven't tested the stand for strength below 50% while…
I recently purchased an Akro-Mills 10124 parts cabinet and immediately printed off some of the replacement dividers , but found I wanted to be able to put smaller pieces in, and at the same time stack them up. While there were plenty of…
Akro-Mils 20701 Bin: Fits in 10726, 10164, and 10144 units. One of mine got stepped on and broken, so I came up with this 'lil guy. This model is designed to be used with vase mode and should be a drop-in replacement except that they…
I needed a spare one to fit the simplex so i printed at 2 and 100% infill PLA but will be printing in PETG, the PLA one is plenty strong tho so test it out first. Added another nut n bolt they been tidied up v2, these printed and fitted…
Long Divider for the Akro Mils plastic storage bins. Modified the original design of the smaller divider to work with the larger bins. (See photo)
Standard large and small drawer dividers for Akro-Mills plastic cabinets. These are direct replacements for Akro-Mils part #s 40716 and 40717. Fits any of these current models…
A bracket for mounting a collection bin (Akro/Uline type) under the exit ramp of a Lee Automatic Processing Press (APP) mounted to an InLine Fabrication Quick Change plate. The bracket indexes off the right mounting bolt on the APP and…
If you have trouble with the seams being weak, try printing with randomized seam locations
This is a library of small part organizer drawer replacements that have permanent dividers to create multiple bins in one drawer. The many available removable divider systems for this are great, but when working with tiny parts (e.g. M2…
Fits Akro-Mils small plastic drawers, which can be found on a variety of Akro-Mils Plastic Bin Cabinets (i.e. 64 drawer, 48 drawer, etc.). Tray (vs. printed and/or stock dividers) prevents small parts from slipping underneath the…
These two bin dividers are derived from the project by StvPtrsn. The intent was to make divider bins that stacked in a way that allowed 12 sets of through hole resistors to be organized within a single Akro-Mils small bin. I customized…
For years, I've needed one replacement bin for my Akro-Mils 10726 parts organizer. I came up with this replica of the original bin and it worked great on the first attempt and fits my 10726, my 10164 and my 10144 units. The bin seemed…
I have printed these with multiple colors in PLA by manually changing filament at the first layer of text. I have tested 2 sizes: Little (for 30-210 and 30-220) and Big (for 30-230 and 30-235) These will probably fit other bins as well. I…
120 mm long Akro mounting rail. Can join these together to make longer rails. Installation Requires two M2.5 Slot Connectors to be attached to this fixture. See https://www.printables.com/@HighDesertHacker/collections/2753370 Print…
Here are several different kinds of parts organizer drawer dividers. They're listed as Width x Height (in mm) to make it easy to find the ones you need. They fit a variety of manufacturer's bins, including Akro Mills, Stanley, Craftsman,…
These are drawer dividers that fit Akro-Mils. There are many other great designs already but I needed something that fit snugly and conformed to the shape of the drawer so nothing could slip under the dividers. I Have 5 different sizes so…
These drawer inserts allow you to keep different items in the same drawer without them mixing together. For example, I have M4x12 screws in SHCS and FHCS variations. These separators allow me to easily keep both styles of M4 screws in the…
Derived from Stewart Clelland's stacking dividers which were derived from StvPtrsn's dividers- they did the hard parts, Im just making a few more variations :) Notice that for some there are longways and shortways orientations! longways…
Interior Dimensions: 3.0" L x 2.0" W x 3.0" D Compatible with Akro hanging bin rails. See related items at https://www.printables.com/@HighDesertHacker/collections/2772311 Print standing up, with supports (for the hanger lip). More info…
Simple items that snaps under the original box insert. It's enough to avoid pieces to go beneath it. Print 12.
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas dva typy vazy ktere jsem vytvpril pro radost. Snad nekoho potesi :-) Tisknuto bez podpor Pro kontakt pro případnou…
I made this because I needed a neat place to store my tips, so I figured I'd put them in my heat set insert bin so they're always ready to use! The tips I use are these: https://a.co/d/ckWd5pk They should fit any soldering tip that has an…
Akro-Mils Storage Bin Accessories I couldn't find anything I really liked due to shape or what I felt was excessive print times, so I created something that is functional, relatively fast printing and uses a small amount of filament.…
This is an adapter for the end of an AKRO-MILS 12901G watering can for delicate seed sprinkling. It helps preserve seed placement in sprouting/germination trays and avoids causing damage to new sprouts. Press fits onto the end with a nice…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas zakrouceny kvetinac i s podtackem co jsem vytvoril pro radost. Snad nekoho potesi :-) Tisknuto bez podpor Pro…
These bins are handy for all aspects of reloading. I use them for bullet bins as well as parts storage when servicing the machine. They fit on the press mount, casefeeder mount and wall mounts. These mounts fit tight to the profile and…
This is a remix of the Bin Dividers for Akro-Mils Small Parts Organizers by Steve with an added label and small scoop to each compartment. I printed these with 3 perimeters, 3 top and bottom layers, and 15% infill at 0.28mm layer height…
For use with the Hikmicro B20 thermal imaging camera as a replacement for the original part. ZnSe lens purchased on Aliexpress. Diameter 20mm, Focal Lenght 50,8mm https://a.aliexpress.com/_mKCBpWG Printing was done on SLA printer. But I'm…
I had good success printing these (and other gridfinity parts) with 0.2mm layer height, 0.6mm nozzle, and outside parameters first (outside to inside)
Some of the other drawer dividers didn't quite fit my drawers, so here is another option.* sections divider for the small/long akro-mils drawer. Print Settings Printer Brand: RepRap Printer: RepRap Kossel Rafts: No Supports: No…
Trays for Akro-Mils small drawers. File naming convention: (3x2)ST(R) - 3 colums x 2 rows short for drawer top (rotated) (fits through hole resistors/diodes) 2TB - 2 Rows (T)all for drawer (B)ottom 10ST - 10 Rows (S)hort for drawer (T)op…
InfiRay Infisense P2 You need to buy a LENS Diameter: 20mm Focal Length: 101.6mm https://s.click.aliexpress.com/e/_Dm3yWGF Print Settings Printer: Voron Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Filament: No Name PLA ABS ASA…
A small Akro Mils drawer divider modeled after the original dividers that come on the back of the storage unit. Category: Organization
KeyMaster This is a simple 3x3 macropad with a rotary encoder based on the rp2040 Raspberry Pi Pico. You can use VIA if you flash the VIA keymap. See the Repo on GitHub: Link Hardware Availability: Pi Pico Zero Keychron K Pro Switch…
Dividing partition for Akro-Mils AkroBins part number 30-220
3D printed labels for Akro-Mills Shelf Bins models 30110 and 30120 (the label for 30120 may fit other models of these bins, but these two were the only ones I had samples of to test). I designed these to have a label applied over the…
Better Organize your Akro-Mils 10144 44-Drawer Storage Cabinet. Allows you to have more parts in the Bin.…
Remix of @Steve_9363's Bin Dividers for 10 division, 5 division and a 4 division variants; for Akro-Mils 10144 or 10164
Trays with sliding lids to securely hold SMD components (50 x 0805, 20 x 1206 in each compartment). 1 small AKRO-MILS drawer can hold 2 long (E12 x 6) and 4 short (E6 x 6) trays. Snug fitting lid: Components will not spill into other…
These modular pegboard brackets support all sizes of AkroBin/Quantum storage bins. The design allows mixing bracket types for custom layouts. Printer: Prusa MKS3+, 0.4mm nozzle Filament: PETG, ABS Slicing: 0.2mm layer, 15% infill, no…
I made this Gridfinity baseplate so I could organize small parts with Akro-Mils bins on louver panels. The baseplate sits inside a model 30237 bin: https://akro-mils.com/Products/Types/Plastic-Storage-Containers/AkroBins/AkroBin-30237…
I love the bin dividers found here: https://www.printables.com/model/42936-bin-dividers-for-akro-mils-small-parts-organizers. I thought they'd be more useful with lids to keep all the small parts from jostling or getting lost so I created…
These are replacement drawer dividers for Akro Mill parts cabinets. The dividers also have the ridge on the edges to fit into the side slots and keep the drawers from expanding sideways. Pictures show original and 3D printed version.…
This is a printable drawer divider for the small drawers on the Akro-Mils 10164 Storage Cabinet.
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. Angled opening. A hanging bin is a good choice when you need to remove it from the…
Hanging bin, compatible with Akro bin rails and Skadis panels. Dimensions: 80 mm wide x 50 mm tall. Angled opening. I use this smaller bin on Skadis panels, with the Skadis to Akro rail adaptor…
I use a inline fabrication mount for my old(red base) and new Lee Pro 1000 presses. With the old style the mount came with a bracket to catch the finished rounds in a bin. With the new(silver base) pro 1000's they are lower and that same…
Modification to the original model - just combined the two files into 1 so if you have a larger printer you don't need to glue the halves together.
When you build a Voron (or buy/build any large/fast printer), you may find yourself needing to order larger quantities of filament on bigger spools than you did previously. I needed to use a 3kg spool of ABS from Polymaker on my 2.4, and…
I made this Gridfinity baseplate so I could organize small parts with Akro-Mils bins on louver panels. The plate sits at the bottom of the 30210 bin without any adhesive or magnets; I haven't found the need to add any, and I like being…
Interior Dimensions: 4.0" L x 2.0" W x 2.0" D Compatible with Akro hanging bin rails. See related items at https://www.printables.com/@HighDesertHacker/collections/2772311 Print standing up, with supports (for the hanger lip). If it works…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Simple replacement clasp for Akro-Mils multi-compartment tool storage. I've had two of these for years and years. Lost one of the clasps some time ago and the rest are just getting worn down, so time for new ones. I toyed around quite a…
Loft ladders (attic stairs) manufactured by FAKRO come with a very long key that is inconvenient to store. This handle is tapered so that the key is held in a "click" position. As the rod is heavy, the holder has holes for 3 screws of…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Hanging bin for Skadis panels. Compatible with Akro bin rails. Dimensions: 120 mm wide x 75 mm deep x 100 mm tall. For Skadis panels, use the Skadis to Akro rail adaptor…
I needed a bit more organization on my desk. Simple tray that attaches to the AkroBins 30-210, snap on fit. Overall dimension is 9"L X 4.25"W X 1.5"H. It will not interfere with the AkroBin End Cover by KPTexan , excellent I might add.…
This is just a simple rail-style holder to keep Akro-Mils Akro-Bins (sometimes punctuated “AkroBins”) hanging on an IKEA SKÅDIS board. You will want two (identical) pieces for each bin: one actually has the bin hook onto it, while the…
Just some small inserts for the Akro-Mils small drawers so you could have more parts. The dividers that can with it are not good for really small parts.
I print these 4 at a time, sequentially (by Object). If it works for you, please Like and post a Make with photo for others to see.
The stone helper allows for vertical storage too as it sits flush with the lid, and can be lifted onto the table for play. My print in the photo is hashed as I print without tops/bottoms/walls to save on filament.
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
I recently bought the set of three organization drawers from Amazon made by Akro-Mils, which have a total of 96 small drawers and 36 large drawers. They include drawer dividers molded into the back of the units, but removing them seems…
Half-height trays for the common akro drawers. Step file included for cad-agnostic divider customization. Import the step (keeping the solids separate) toggle off the dividers you don't want, and combine what's left into two bodies. If…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. Angled opening. A hanging bin is a good choice when you need to remove it from the…
Fits utility sink with 29-30 mm / ~1.156" rim. Mount is 3.0" long. Refer to my other models for attachments, including hanging bins. Compatible with Akro hanging bins, e.g. AkroBin 30210. More info at blog.outpost4.org.
— for english please scroll down -- --- moved from MyMiniFactory --- Makrolinsenadapter für Wärmebildkamera Kaiweets KTI-W01, HTI HT-19 und andere mit gleichem Gehäuse für eine CO2-Laser-Linse mit 20mm Durchmesser. Es gibt zwar bereits…
Hanging bin, compatible with Akro bin rails. Dimensions: 80 mm wide x 80 mm deep x 20 mm tall. I use this on Skadis panels, with the Skadis to Akro rail adaptor…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám tu pro vás kroucený květináč s podtáckem, který jsem vytvořila pro radost. Snad to někoho potěší :-) Tištěno bez podpěr Pro…
I designed this ringlight for my photogrammetry setup. The ringlight suits 6.7mm diameter camera lenses. Just let me know, if you need a different diameter. You will need 32x3 5mm LEDs, 32x 100Ohm Resistors and a 12V Power supply and a…
This organizer is designed to hold up to 15 CR2032 batteries with easy access to all of them. I don't know why you need 15 CR2032 batteries, but now they are organized and held neatly.
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Needed some dividers for my akro-mils bins so I whipped some up quick in fusion, and thought I'd share in case I can save the time for someone else. Added a flared base both for bed adhesion, and to make it easier to grab small parts.
Ein einfacher Adapter, um das Rollei Lumis Mini–Ringlicht Bi–Color über ein Canon EF Makro 100 1:2.8 L IS USM für Makrofotografie zu setzen. Keine Stützen bei Druck notwendig.
Simple to print 4 Sections Divider for the Akro-Mils Plastic Drawer Storage Cabinet. Please use supports You can find my file here on marker world: https://makerworld.com/en/models/575547#profileId-495967
This is a remix of the DDR3/4 storage box to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.
Hanging bin for Skadis panels. Compatible with Akro bin rails. Dimensions: 120 mm wide x 80 mm deep x 10 mm tall. For Skadis panels, use the Skadis to Akro rail adaptor…
My x1c does not have a flat surface behind it to put a box for it to purge filament into. I had a bunch of these AkroBins (#30230, 10.875x5.5x5) laying around and they're a pretty perfect fit for the area behind the printer. This should…
Hanging bin for Skadis panels. Compatible with Akro bin rails. Dimensions: 120 mm wide x 80 mm deep x 20 mm tall. For Skadis panels, use the Skadis to Akro rail adaptor…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Here is a ring that will slip over the Hornady Lock and Load Ammo Plant powder dispenser. The slot in the front will fit the standard sized paper stock for akro bins. I find it handy to be able to have my load data directly in front of me…
Model oświetlenia LED do Makrofotografii.
Gridfinity 1x3 scoop bins dropped in to a well-fitting Akro Mills drawer insert.
Old Akron University logo from the 90s. Turn on Ironing for a better top layer GIANTARM Matte PLA (Matte Navy Blue) SUNLU PLA (Pure Yellow)
Ke stříšce z 6mm makrolonu jsem potřeboval udělat minimalistický okap. Na výrobu okapu byla použita běžná 32mm PVC trubka, ze které byl vyříznut cca 13-14mm pruh. Vznikl tak “C” profil, který se nasadil na makrolon a zajistil…
Needed a way to flag bins in a repair shop. These can be printed quickly and easily and can have text added to them. (Also I made them look like a snake)
A remix adapting High Desert Hacker's Akrobin mounting rail to use 6d6178's Skadis T-Nuts Mounting System.
I bought an akro-mils drawer for small parts and was dissapointed with the lack of separators, as there simply weren't enough of them. This seems to fit perfectly Cabinet in question:…
This is a replacement for the Fakro ladder "foot" or "shoe", the plastic piece that covers the raw metal end of the ladder which touches the ground. It is a snug fit, which might need some light taps of a mallet to get on, but will stay…
These are drawer dividers for Akro-Mils storage units (also Uline H-5578 and H-5579). There are variations to split a small drawer into 2 to 5 partitions, and a larger drawer into 2 to 10 partitions. The SolidWorks files and STEP files…
This organizer is designed to hold up to 21 LR44/SR44/357/303/AG13 batteries with easy access to all of them.
Self-aligning Gridfinity 2 X 3 drawer liners for Akro-Mils 24-Drawer Plastic Drawer Storage Cabinet - 20" W x 6" D x 16" H, 10124 Black Drawer measurements Product listing: Organizer drawer external dimensions - 6" x 4-1/2" x 2-3/16" The…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. Angled opening. A hanging bin is a good choice when you need to remove it from the…
