Counting matching models…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
I'm thrilled to introduce my latest design: a Round Flower Pot adorned with an aligned scale-like pattern on its sides, capturing the essence of elegance and practicality. The pot's sides are tilted at a subtle 6º angle. Its wide, flat…
Aligned Carrier Plate Pairing for Qidi Plus 4 The Qidi Plus 4's stock carrier plates have bearing mounts that are misaligned from the factory. See the cutaway photo provided. This cutaway is taken directly from the STEP files provides by…
Clip for keeping filament aligned on Prusa spool
This is a modification of the work of two others. This version should fit and be aligned with the DragonBurner V8 toolhead. I am working on a TapChanger build and printed the origninal model earlier today and to my dismay the TapChanger…
Remixed version of a dog waste box but with 90 degree alignment
Aligned to xyz. Scanned with the Revopoint MetroX
A modified version of donnyb99's great tensioner design. As some mentioned in the comments, the alignment of the pulley ends up raising the belt a little causing misalignment of the belt path and rubs against the v-slot aluminum…
The original feet are offset , so i wasn't able to mount it onto one extrusion. https://github.com/Enraged-Rabbit-Community/ERCF_v2/blob/master/Stls/Gear_Box/%5Ba%5D_Gear_Box_Bottom_Panel
Remix of 4x Tweezers holder to mount on a IKEA Skådis Pegboard, remixed with better parameters to make it fit easy.
During my fight against breaking idlers i slightly modified the x-axis to achieve better alignments between rods, bushings and timing belt. A T20 GT2 idler and a 3x18mm dowel pin as axis are needed.
Barrel mount silencer / moderator / suppressor, for non threaded barrels. (F3D inlcuded to fit all). I tried a few other existing barrel mount stl's but one slight knock and they were no longer true so the pellets smashed the end of the…
I just aligned the holes correctly to make it centered. I like the spikes that @NossonSternba_855068 added. Magnets needed: 8 x (8mmx3mm) It's important to align magnets the same polarity on one part. North up on either one of the parts…
The "original" lever had to much play - the gear was not aligned with the filament path. I solved it on the lever mount point for the gear (the mount point for the gear is now a bit smaller for a tight fit and pushed in the direction that…
The previous version was mis-aligned (at least to my Artillery Genius), by about 3-4mm. I re-created it from scratch in CAD and gave it a new angle to better support the cable. The crown height was reduced such that the zip ties can…
I couldn't get the o-rings to sit straight for me. I redesigned the spindles to better align the o-rings by “framing” them. Had to widen the openings in the lower support to accommodate.
This part enables you to use the MK3 fan shroud on a Prusa MK2 (Dolly). for use with: https://www.thingiverse.com/thing:2261050 Source: (Original part was the original by Prusa on GitHub, converted from openscad to STEP and then imported…
M3 screws 8.5mm height spacers for dualhorn
Eono Cardboard Spool Edge with aligned holes
description Those are holders for HSW. They are lattice-aligned, meaning that they use the distances between HSW's hexagon centers as width and height. Therefore, there is no distance, or regular distance, between each holder. This is…
With original feet belt has 0.466 degree tilt which makes it a bit harder to align everything properly. Generally misalignment should not be an issue, but this triggers my OCR, so I did this quick mod. Diff shown on screnshot ("after" is…
This is an alternate exhaust cover for Voron V2 or Trident which instead allows the exhaust box to align to the top of the panel, with the cover covering the entire hole. The main difference, aside from the wider brim, is the location of…
I've been using apache07x BTT Filment Sensor Mount for a while. The forward shift in the original design didn’t sit well with me, it placed unnecessary stress on the filament, especially if it's brittle. Tools like the NoClogger become…
Pegs moved by 2mm to make the lid align with the case.
This is a spacer for the extruder to improve filament path. The gears had to much play and caused many problems (especially with TPU). There are 3 spacers, you have to find out which one fits best for your gear set. The number in the file…
What is this I have used Chris_Hill s modified tension pulley for months now, there is nothing wrong with them but spotted a tiny potential for improvement. With a few small changes it could print better in another print orientation that…
MP Select Mini Gantry Support This is a remix of the support pylon for FDM_Guru 's excellent X Gantry Support System for the Monoprice Select Mini 3D printer. It appears that there are now variations in different releases of this printer,…
Lined up the hex nut holes parallel to the mounting plane. New Offsets X: -29, Y: -14
Quick remix of @sTranGeTag's pistol grip, aligning the one nut trap that was misaligned in the original. Other parts included here for convenience, but have been untouched. Note: Untested Print Settings Printer Brand: Creality Printer:…
Tired of crooked electrical outlets? Here's a simple yet effective tool I designed to make sure your wall sockets are installed perfectly level —every time. This 3D-printed tool is designed to fit most standard outlet frames. It holds a…
I did this one based on that : http://www.thingiverse.com/thing:738082 Made it to stand next to my kitchen wall. Took approximatively 4h to print in 0.4 resolution on my Freesculpt EX2 (Malyan M180). Pretty beautiful and VERY useful !…
On the MK3s, the X motors are closer to the frame than on the Bear Mod. Therefore, I had to adjust the upper bracket to create enough clearance. @SonicBroom has also created a solution for this but I don't want to deprive you of mine. On…
The Open Workbench Logic Sniffer (https://www.seeedstudio.com/Open-Workbench-Logic-Sniffer-p-612.html?queryID=b9b3c1a90d4e53bd93ce2db349053085&objectID=1928&indexName=bazaar_retailer_products) is a very useful tool, but the standard…
You know that moment where your warp looks fine in the heddle, but uneven once you start twining or tying off? This tool is a simple warp spacing comb designed to match the spacing defined by the heddle. It can be used: before twining, to…
Prints well in PLA and ABS.
Both a solid surface and hexagon cutouts versions with the re-centered drop hole available. Onshape model: https://cad.onshape.com/documents/5134cd5078995c7872fe569a/w/66e8063fb60a4b2ade631418/e/db891b3d251d4bd29f919477
Holders for round mini hygrometers with matching cutouts. Suitable for use in the GunplaMark Filament Storage Box 2026. I use round mini hygrometers that have two clamping points on the back, aligned at a specific angle to the display. To…
Prints well in PLA and ABS.
This represents the aligned rectilinear filling, it is the always hidden part of a 3d print which is highlighted on the trophy.
M18 Vac holder. a remix of the original just with mounting to a single 2x4 stud behind drywall in mind. will upload a printed photo when its done printing. no dimensions were changed from the original except the hole location on the top.
Prints well in PLA and ABS.
Arcade coin catcher for misaligned coin mechs. Simple device to catch coins dropping from misaligned coin mechs to stop coins falling to the interior of the machine and guide them in to the cash box.
remixed for printing without supports Category: 3D Printer Accessories
This is a custom-designed USB-C Apple Magic Mouse mover case. It uses the internals from this Amazon unit , which was initially built for a traditional PC mouse. That design worked fine for most optical mice, but the Apple Magic Mouse’s…
Simple flat end to help with alignment of the carriage to the bed frame. For new 12mm rods. Just line it up flat, and tighten it down. I made this part, specifically to work with this... https://www.thingiverse.com/thing:4411122 Thanks,…
description Those are holders for HSW. They are lattice-aligned, meaning that they use the distances between HSW's hexagon centers as width and height. Therefore, there is no distance, or regular distance, between each holder. This is…
What is this I have used Chris_Hill s modified tension pulley for months now, there is nothing wrong with them but spotted a tiny potential for improvement. With a few small changes it could print better in another print orientation that…
M18 Vac holder. a remix of the original just with mounting to a single 2x4 stud behind drywall in mind. will upload a printed photo when its done printing. no dimensions were changed from the original except the hole location on the top.
Holders for round mini hygrometers with matching cutouts. Suitable for use in the GunplaMark Filament Storage Box 2026. I use round mini hygrometers that have two clamping points on the back, aligned at a specific angle to the display. To…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Several aspect of the design was not aligned/symmetrical. I fixed that.
Name: Tyson McLaws Part name: Poly3 Left-Aligned Pillow Bracket Revision: v1 Section: VexU Purpose: Support for Drive Train Proposed material: something durable 🤷♂ Needed by: ASAP Comments: STL: Image:
“Where symmetry meets soul, and every layer holds intention.” A vibrant standalone wall art piece inspired by sacred geometry and layered symmetry. Seven distinct layers form a radiant heart motif surrounded by interlocking shapes and…
This remix of Rein0021's part aligns the clamped side of the belt with the pulleys. As you can see in the image, the Y-belt now runs perfectly straight which is beneficial for precise printing as the Y-axis increments remain of identical…
Detailed Discussion in this video: https://youtu.be/CczqSuy2NOw This system allows you to mount a device to a display and have the device remain aligned to the display. If the display rotates, the device will as well. This is especially…
If you align one of the triangular sides of a square pyramid with one of those of a regular tetrahedron in such a way that the vertices align, how many sides will the shape you produce have? The answer is likely to surprise you. The key…
The original plate didn't work well for me, as the hole was too small, and the lever was not aligned properly with the drive gear, so I made a new version and it works better for me. YMMV. This only works for the MK10 gear, I made a…
![MP Select Mini X Gantry Support + Camera Mount [Reinforced and Realigned]](https://media.printables.com/media/prints/104933/images/1050470_7bd50778-aa3e-40f4-a1fa-3073ec9c5961/aa03752483e09f37421c28265c134c55_display_large_10.jpg)
