Counting matching models…
Design Update The red clip shown on the right side of the second image is the KLIPPT Locking Cable Clip, which succeeds this earlier KLAMMA model. KLIPPT introduces a separate, versatile base plate that enables multiple mounting options,…
Dimensions (LxWxH) 164,5 x 65,75 x 42,7 mm (100% scale) Basic information Print in place articulated Hammerhead shark. The model was inspired by the Great hammerhead shark, the largest species of all hammerhead sharks. It can grow up to…
A range of circular, oval and rounded rectangle bases sized equal to those produced by Games Workshop.
Update 2025-02-17 Added Breech - Lifter Nut v2.stl , Breech - Lifter Bolt v2.stl , and Breech - Lifter Pin [x2].stl These replace the old Breech lifter parts, should fix issues with the nubs shearing. Insert the pins into the lifter parts…
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…
It is now possible to print the handle without support material. The handle also consists of only 2 parts and is put together after printing. The main part of the handle has a height of 290mm together with the bottom part resulting in a…
Hier mal ein Modell an alle, die gerne Ordnung in das Batteriechao bringen möchten. Die Kiste fasst 12 AA Batterien und ist stapelbar. Es wird kein Support benötigt. ACHTUNG: LEIDER GIBT ES DA DRAUßEN VIELE WIDERLICHE MENSCHEN, DIE FÜR…
Zusammenfassung Version 2.0 des faltbaren Taschenkamms! Er ist kleiner! Er ist leichter! --.... und ja, das war's dann auch schon... Meine Version 1.0 wurde von Grund auf neu entworfen, und dies ist eine Weiterentwicklung meiner Version…
Remix from zx82net Great Rugged Box. The latch and hinge are not change so you can use all of his different models. Ammo box for 50x308 Printed with Verbatim RED PETG and Prusament Jet Black PETG 0,30mm 4 Layers. 2022-08-12 Uploaded a…
Ruggedized, latched, ammo boxes for your 9mm. Has provisions for a TPU gasket (not required) Need six M3x20 screws to assemble. Screws thread directly into the plastic. I taped the cardboard box to the inside of the lid as an cartridge…
All credits to @ Dlpoling onThingiverse | https://www.thingiverse.com/thing:5170258 Easy Print in Place Flex Hammerhead Shark.
[Update] ---2024/07/14--- Added ammonite parts. You can make your own Flexi Ammonite. This is a flexi squid, an improvement on the "Squid and Ammonite Set" that I published on Thingiverse and Printables. Flexi Squid & Ammonite Set by…
Whoever holds this Hammer, be they worthy, shall posses the powers of Thor! This is an ambitious build. I set out to model Mjolnir in my own way with an ode to some of the things I really like about the MCU version. My main caveat was…
Ammo box to hold 100 223/5.56 cases. All screws are m3x30 unless you use the handle then those 2 should be m3x35, m3x40 for double handles. March 2024, added a 9mm tray as requested so you could do half and half or use the same box for…
Dimensions (LxWxH) 150 x 74,86 x 51,67 mm (100% scale) Basic information The original Articulated Hammerhead Shark gets an update! Thanks to its more stylized and exaggerated appearance, it's even cuter and more eye catching than the…
This is a multiboard compatible hammer hook I designed to use the standard multiboard pegboard click. This should hold any standard hammer. I printed at a 45 degree angle to give all sides a consistent texture with tree supports.
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 9mm rounds in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one tray to…
Mjölnir - Thor Hammer keychain
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 200 - 22 Long Rifle rounds in a single removeable tray. The ammo tray protrudes 5mm above the top of the box base to allow for easy removal. Print Notes:…
Medium capacity ammunition box for 100 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. High capacity box (150pcs) available here –…
You can also reuse the sellier & Bellot inlay.
I got a request for a ammo box for 12 GA Remington. The spacing is 48pcs/20,90x70mm between insert top and the bottom. And the total height between top and bottom is 73,35mm. I made 48pcs so that would fit the most printers. The size of…
🔫 Introducing Modern 9mm Ammunition Boxes with Magnetic Closure by Veracon Engineering! Experience the ultimate in ammunition storage with our sleek and innovative 9mm ammunition boxes. Designed for convenience and style, these boxes…
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
The two original Print files, “9mm lid 1.1” Max" and “9mm case 1.1” Max" Will ONLY fit rounds that are at or less than 1.1 inches. (Hollow points some ball ammunition) The two new print files “9mm Top 1.169 Max” and “9mm Case 1.169 Max”…
Meet Sammy, a charming 3D cartoon snail model that will win your heart. Sammy boasts a soft body that's not slimy at all 😊. His big, expressive eyes add a touch of playfulness, making him a great buddy for kids but sure to delight adults…
Updated 28th August 2024, current list of bases: 25mm round 25mm slotted round 25mm hex-hole round (Skaventide box) 32mm round 32mm hex-hole round (Skaventide box) 40mm round 50mm round 60mm round 60x35mm oval 75x42mm oval 105x70mm oval…
I had a need for a soft hammer when making some parts fit tight together, and then I made this little hammer/mallet with a hammer head made of TPU, where the one end is soft (40% infill), and the other end is a bit harder (80% infill) I…
UPDATE: There is now a parametric version for all your niche ammo storage needs: I was unsatisfied with the existing options for ammo boxes, so I made these. In my opinion, most designs are inefficient, requiring more material and time…
I got a request for a ammo box for .22lr TIKKA. The spacing is 50pcs/25,4x6,14mm between the insert top and the bottom. And the total height is 28mm between top and bottom. I made the model first with M2 screws but realized that some of…
9mm Rugged Ammo Box Collection (50x, 100x, 150x, 225x, 396x) This is a remix of the Rugged Parametric Box by Whity, adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source files for…
It's that time again. This cute little buddy is available for personal use for a limited time. Find this little sea critter and more of its sea friends in my Thangs , Patreon , or MMF Tribes memberships, happy printing! Follow me on…
I buy cheap reloads in bulk, which come loosely packaged. To transport my ammo I needed some kind of box, which is why I decided to design one. I designed this fully parametric in Fusion 360, which allows any caliber to be inputted. I…
Print with whatever material you'd like. Use 1.6mm Stainless Steel Hard Wire. This worked great: https://www.amazon.com/dp/B0C5VVVNX2?ref=ppx_yo2ov_dt_b_product_details&th=1 Box shown is printed with: Prusament Army Green PLA - Lid/Bottom…
A support-free simple yet cool looking miniature riser for DnD, warhammer, flying creatures or just for displaying minis Features Printable without supports Beautiful chain texture Sizes for different common miniature base diameters (let…
50 count storage box. two potential lids. the recessed lid is thicker on the side to reinforce the track. the tray may be modified and published later. Print Settings Resolution: .2 Infill: 20 Notes: this was my first attempt at a pattern…
Just slice and print, one-piece print-in-place. Might need to play with it a bit in order to free the joints. Don't print smaller than 50% of the original size, joints won't work properly.
No supports needed. I included a PDF drawing to see exact dimensions. For strength I suggest using at least 3 perimeters. 5/17/25: Version 3 Rotated model for correct print orientation. Added updated drawings. 5/17/25: Version 3 Added…
A miniature of a flying galleon ship. This model can be used as a space galleon in a Dungeons and Dragons Spelljammer game or in other tabletop fantasy games. This model is at a scale of 1:600. This is the same scale as the official…
A simple hammerhead shark model that also comes with different hole sizes for magnets. It comes in different versions: Circular holes cut in the bottom side with diameters of 10-18.5mm and a depth of 3mm or 5mm and a clean version with a…
High capacity ammunition box for 150 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. Medium capacity box (100pcs) available here –…
Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: .20 Infill: 50 Filament: Overture PETG White
100mm T-Track Clamp, T-Nut Halteklammer 100mm M6 for up to 50mm Materials Flexible adjustable holder and Knob for M6 Support: yes only in the Slot Infill: 60% Gyroid Infill M6 Set Washer, Screw, Bolt…
Caja para almacenar o transportar munición de 9x19mm de 50 cartuchos de capacidad. Tapa deslizante, cool y práctica. Yo lo he imprimido con 0.15mm de altura de capa y -0.1mm de compensación XY. Utilizar también el alisado en las capas que…
I got a request for a 308 Blaser ammo box of the new design. The spacing is 50pcs/12,60x75,50mm between the insert top and bottom. Please read the size before printing. I made a o-ring to fit the lid but it's made for 2mm o-ring string if…
9mm ammo box. Holds 50 rounds. Printed in PLA Matte, but you can choose your material. No supports needed. If you want you can use a few drops of super glue on the insert tray to hold permanently in place. On the side of the box you will…
I got requests from different brands for my .22lr TIKKA ammo box so I'm going to do a series of those and a couple more I've been thinking about doing. Just let me know if you have a favorite i missed. The spacing is 50pcs/25,4x6,14mm…
Hi! Here comes my Hammond type boxes, sizes 125B, 1590A, 1590B, and 1590BB. Perfect for DIY effect pedals. The files are available in STL and STEP formats. Personally I use wood screws diameter 3 to close the boxes. I print in PLA, with…
This is a remix of a remix i made improvements so the iris would stop coming off track and jam. Here is the description they posted with the original model about how to print and process. (This is a smaller, 4-leaf redesign of emmett's…
This model represent a living ammonite. It's a remix of: https://www.thingiverse.com/thing:3785257 https://www.thingiverse.com/thing:1611970 I really like the articulated model of lexlang, but I wanted to make some changes: a new shell…
Hammer holder for Honeycomb Storage Wall. Fits hammers head up to 23mm wide. It comes with 4 different version - with either inserts or hexagon plugs; and in either standard position or rotated (in case you have mounted your wall in a…
Here are some 22LR storage boxes and trays. These are designed to be able to arrange large amounts of bulk 22LR ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 15 trays can be stored in…
This is a 2 piece printable ammo box to store 308 rounds. I reload my own rounds and found these 3d printed versions to be just as sturdy as the store-bought versions, but way cheaper. The box holds 50 rounds. Use an 18-gauge brad nail…
Here are some ammunition models of various caliber. They're good for props or demonstration purposes. Here are the calibers that I currently have: -.22 LR -7.62x25mm Tokarev -.32 ACP (.32 Auto) -.380 ACP (.380 Auto, 9mm Short) -9mm Para…
Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…
This is loosely based on https://www.thingiverse.com/thing:2349048 , but I didn't like the overall print quality. After I saw a similar, foldable sewing aid somewhere to buy I constructed this sewing aid with 3mm, 4mm and 7mm (folded)…
I got a request for a 30-06 Ammo box and there are more people asking for it and also someone who thought the previous lid was too tight for their ammo. The reason was that I made it tight for the Norma ammo my friend used so it wouldn't…
An ammonite model that can serve as a nice desk decoration. This print uses a free model of an ammonite and a rock. Print does not require supports. Enjoy! If you like this, please check out my other fossil models: Dragon skull…
These miniature bases are compatible with Warhammer 40k, Age of Sigmar, Battle Tech and many other table top games. Available WITH and WITHOUT hexagonal holes for the miniature pins. We recommend to print upside down on a textured plate…
Just general hammer. Great for some basic assembly in the office or removing prints from heatbed or SL1 platform together with spatula. Print instructions Use 70% - 90% infill
print it upside down. .2mm layers. textured PEI looks best imo
Updated 10-Oct-23: This model has had issues for a while. A bunch of people have noted in the comments that they needed to do a bunch of modifications to get the parts to fit together. I finally got back to this to make some needed…
Deutsch: Ein kleine kleine Verbesserung für den Luba, um ihn 4, 5 oder 6 Messer pro Seite zu ermöglichen. Was brauchst du: (8x/10x/12x) Ruthex M4x8.1 Gewindeeinsätze Tipp: Zudem empfähle ich Klingen zu verwenden die Hinten angeeckt sind.…
Print on it's base with tree supports for the ears and top antenna piece. The grooves shouldn't need support, mine didn't. Otherwise, pretty happy with the result. In future, I might add a separate model stl for the top antenna as mine…
A scratch designed Toolhead cover/cowling for the Centauri carbon that is weight and strength optimized. The uninspired name comes from the star in centaurus, and this being the third (γ being the third letter of the greek alphabet)…
Check Out my improved Design - Slim Ammo Box 9mm 50 Rounds V2.0- ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 I did not found a slim Ammo-Box for 9x19 which i liked…
This is Hooky the funny, helpful multifunctional snake hook I designed it for multiple use cases for my Ford Nugget Fiamma F45s awning, where it does a great job. It fits in the 7 mm Keder rail and locks itself under load. It is very…
I got a request for a 9mm ammo box. The spacing is 35pcs/9,40x30,70mm between the insert top and bottom. I made 2 lids, 1 with logo and 1 clean. I am using 1,6mm stainless steel Tig-welding pin for the hinge and latch. I made the latch…
Remix of thing:3030916 “Thors hammer 2.0! Mjolnir” and the stand is from thing:2222197. Thanks to all the designers to make these awesome files! I printed this with very dense infill. 40-50% on all pieces. The handle was a little too long…
This is a collection of all warning symbols (W001 - W067) according to ISO 7010. All the models are drawn by hand, so some minor differences to the norm can occure. The signs are based on the images from the following Wikipedia article “…
I re-created this model for Hamm, from Toy Story. It was made from scratch following some online images as references. This V2 model has the eyes and eyebrows separated so that you can print them in a different colour! To print I…
Warhammer 40,000 11th Edition Terrain Area Footprints This collection contains printable terrain area footprints specifically designed for use with Warhammer 40,000 11th Edition. The set follows the official terrain footprint sizes used…
I have changed to fit elite darts and have a more secure lid and hinge. I would recommend printing with 0.2 mm layers.
It's been a while since I shared anything. Model building was on hold for a long time after the passing of my father, the person I learned it from when I was little. I was planning to first draw and build a typical Dutch "opduwer" but…
This is a hammer and sickle, the symbol of communism. I created it by getting this SVG: https://commons.wikimedia.org/wiki/File:Hammer_Sickle_Star_red.svg , using Inkscape to remove the star, importing it into FreeCAD, converting to a…
You can open it in your CAD-Software and insert a writing for example. If you want some medal for the first place for example look at my other models. includes medals: -1st Place -2nd Place -3rd Place -Cocktail I printed this with red and…
Roland PA-48 N Key-Hammer for White Keys These hammers always break at the same spot. The official spare parts are difficult to get and too expensive. To make your own spare part you need the weight from a hammer. This is easy to break…
BUILD GUIDE INTRO Remember your promise in a most rootin' tootin' fashion 🤠 Presenting Sidetrack, a break-action hammer-prime revolver! Heavily remixed from the Hammerhead by Leedle Dynamics, the Sidetrack achieves higher performance and…
I designed these ammo holders to hold 400 rounds of either .223, 5.56, or 300 AAC Blackout ammo. These fit into the MTM .30Cal Ammo Can for storage. Print instructions Photos are original design, I recessed the dividers down a bit to save…
Works with caliber 308w, 30.06 and 30-30(confirmed by the printed cow@theprintedcow_527926 ) I needed a good ammo clip that I can easily carry with my during my driven hunts so that I have enough bullets, but still doesn't make any…
Perfect decoration. 350mm hight
A 3D-printable replica prop of Thor's Stormbreaker.
This is a multi-part version of Mjolnir based on the design used in the Marvel Cinematic Universe. It was designed in Fusion 360. This is the parts list: Hammer: 1x HammerBot.stl 1x HammerTop.stl 2x HammerEnd.stl 1x HammerCap.stl 4x Core…
I made this for a nephew, who lost the handle of a hammer. I modelled the entire hammer and only printed the handle. I recommend printing the hammerhead in TPU and to do a filament swap on the handle.
This model is a charming cartoon snail that wins everyone over with its huge, expressive eyes. It is designed for easy printing. Colors: The model looks great in a combination of flesh tones and black/white for the eyes, but feel free to…
Huge thanks to Bluewar for the original design. Stackable ammo box for 9 mm Luger ammunition. Assembly is the exact same as Bluewar's design, along with the retained ability to link boxes together + pair with his carrying handle! Let me…
This is a 22lr ammo box with a sliding lid with a detent. I designed it to take CCI style 50 round trays, because I don't really like the cardboard their standard rounds come in. I printed it with 3 walls and 20% infill and it works fine…
This is a mini cute version of Thor Hammer (Mjolnir). It fit in 4.5 x 3 x 9 cm. No support needed. If the scale fit your needs, use the gcode file, I selected lightning pattern to get a faster print. It can be upscaled easily to life size…
I've been looking for some nice looking stand for my minis and I've found one designed for ThomPerry63. It was designed for resin printing, and since I'm using mainly PLA I've tuned it to use it. Changes: filled the bottom, so you dont…
A life-sized 3D printable version of Thor's trusty hammer, Mjölnir!
This is a remix of a rubber mallet holder because I like the elegant design and it prints well. I wanted to use the same design for many holders of various sizes. In the attached photos, the white holder for the small rubber hammer has a…
I know I said I wanted to make models of less known species but one of my best friends said they would love to see a hammerhead shark, so here you go. The last joint is a bit rigid, but it's actually not that bad since the segments before…
22/05/2023 - Update Have now printed the .222 100 round box, it works well however its a little tight, the rounds fit but i may either reprint with slightly larger holes or just run a round sanding bit through them 07/05/2023 - Update…
I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall. My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the…
This is intended to be used with the honeycomb storage wall https://www.printables.com/model/152592-honeycomb-storage-wall Included is a model used for attaching with an M4 insert as well as a model with an honeycomb wall insert already…
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .45 ACP Cartridges in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one…
This is a replica of the Sledge hammer in real size. The original replica of the hammer (Scale 1:2 - 50cm) from Ubisoft can be found here:…
This set includes a 1:18 scale hammer and one hammer that is compatible with Playmobil or Sylvanian families. The 1:18 scaled hammer comes in two versions where "hammer2" is easier to print. Visit my blog at Enely's 3D
Ammo case that can hold 50 9mm rounds.
