750 models
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Video: https://www.reddit.com/r/3Dprinting/comments/o929er/this_3d_printed_digital_analog_timepiece_is_art/ This is a seven segment clock where instead of LEDs we have segments moving on the Z-axis of the viewing pane, the difference in…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
Holding frames to convert analog film media with a (D)SLR Get your beloved media to the digital age. Stuff you need: SLR Macro lens Flash (recommended) These parts are optimized to get the highest possible conversion quality. The lens…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Do you want a small clock that is not boring and ugly but shines in your interior with a minimalistic touch? Well, here is the Minimalistic Analog Clock for you to print. This clock was designed to fit a Quartz clock mechanism (I took one…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
(English see below) Diesen einfache Eckverbinder kann man in Fusion 360 so anpassen, dass er zu unterschiedlichen Kabelkanälen passt. Dazu gibt man in Fusion 360 (Datei „ Kabelkanaleckparametrisch v2.f3d “) unter dem Menüpunkt "ändern"…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
A box for Analog Devices Adalm-Pluto SDR with "Clock in" SMA connector for external Clock source. In near future there will be diffent bottoms of this box with USB holder, mounts to tight this box down. If a change is needed to this…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for PETGSource material: PET
This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Just minor modifications and deepened blade slot like the latest prusa design.
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
The sun traces a shape in the sky throughout the year, and that shape is called an analemma. They are challenging to capture in an image, because they require a camera in the same place and orientation for an entire year, and the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Es un practico pastillero semanal. Caben tres pastillas por compartimento bastante bien. La unión entre la tapa y el pastillero la he realizado con un tornillo auto roscante con arandela de M3x10mm pavonado negro. Lo he hecho por…
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Sometimes when you're making music or killing mutant aliens far off in the Science Fiction future, you just need a steady tilted surface to work with your equipment on! Behold the Analog Synth Stand! Three models: Large (used on Behringer…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Apart from the basic functions that you can expect from a quarter circle protractor: Measure angles Draw straight lines and right angles Find the center of small circles You can do most of the functions of a scientific calculator with…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
I love the Analogue Pocket and its dock. However, the dock has an annoying design flaw. The dock's USB-C plug is slightly taller than the recess it sticks out of. These guide rails (ugly, but functional) make it much easier to line up the…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
A push-on filter adapter for 28mm filters, a lens hood, a lens cap that can be used with the filter/lens hood, and a flat lens cap with/without logo. The lens hood is inspired of the original one. If someone has the exact dimensions of…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Analog Thumbstick modification, for those whose thumbs are sore from this little sharp sticks. 2 part version uses original rubber ring from analog thumbstick (you put it inside the print and then insert stick from bottom up). Can be…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
Analog LED ring clock with 60 NeoPixel RGB LEDs Features: This LED ring clock uses a 60 digit RGB NeoPixel LED ring split into 4 quarters The time is shown in an analog way as you can see in the pictures The code for the used ESP8266 D1…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Košík jsem navrhl dle původní součásti kanalizační vpusti, vytištěno je s materiálu PETG, je použitá oranžová barva, aby součástka při čištění nebyla opět vyhozená jako původní černá. Při tištění je potřeba podpěr pod prstencem kterým se…
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for PETGSource material: PET
To avoid that metallic objects touch the connector, I designed a small lid to stick in place of the LA connector when not in use. I used PLA to print the thing, but PETG is probably better due to more springy behaviour. No support is…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Español: Canaleta para ordenar los cables de la impresora. English: Duct to manage the printer's cables.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
The Elektron Analog 4 MKI 19" Rack Ears are a great way to make your Analog 4 MKI part of bigger static setup. It is compatible with standard 19"rack with inner width of 458.5 mm, but it can also fit some non-standard 19" racks not…
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for PETGSource material: PET
Werksseitig liefert REV Ritter bei den Brüstungskanälen keine Verbinder mit. Hier ein Versuch, der sich jetzt im Feldeinsatz bewähren wird. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 300…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Either side knob controls X and Y axes. The support bed is bent slightly to fit over two knobs. Rolling the simulated food from top to bottom is easy. The challenge is to keep the ball moving and not become constipated for even a second.…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Print two of the sides, four of the back and one of the stands. No supports needed,
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
Ein einfacher “print in place” Kabelkanal in verschienden Größen mit Schanier A simple "print in place" cable duct in various sizes with hinge
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
This design is compatible with the northern hemisphere only. The Southern hemisphere version is available here: https://www.printables.com/model/1461533-print-friendly-curved-analemma-vertical-plate-for No post-processing (other than…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Ein Modell von einem Kabelkanal für Alu Profile der 30er Reihe TypB mit 8mm Nut. Zum einen dient der Kabelkanal zur Verlegung von Kabeln und außerdem noch um einen 10mm LED Streifen auf der Außenseite zu befestigen und so z.B. eine…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for PETGSource material: PET
After receiving my Analogue Pocket, I was disheartened to discover that it wasn't compatible with one of the finer gaming accessories of all time- The Hori Light Boy VLB-01. I thought this would be an excellent opportunity to create a…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
A box to keep your analytical columns safe
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
The model from the fotos is printed with a 0,4mm nozzle, out of Prusament and Extrudr PETG with a layer high of 0,2mm. I attached a piece of self-adhesive sealing tape to the bottom and the lid so that the measuring device fits into the…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
By using it, you will have the sample under the spot all the time and it won't burn. For rotating this, my lab used an old record player motor. I really recommend slowing down the printer for better precision . Good wishes from NEEM -…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
Simple, low profile guide rail to help you line up your Analogue Pocket while using the dock so you don't scratch it. The rail needs to be stuck to the dock with double-sided tape. For a beefier, non-stick solution, see…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
This 3D analemma replaces the original 2-faced Schmoyer analemma & doesn't require any rotation or alignment to accurately display the time. You just need to read the appropriate shadow edge against the main dial crescent; i.e. left or…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Original lid has cracked and this is 3d printed replacement. Size is 189x189mm to fit 190x190mm hole.
Print approx. €14.71–€17.98 excl. taxPreliminary estimate for PETGSource material: PET
This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that connects to the strap of the Hamina wireless Nomad. Designed so you don't break the USB connector when using the NXT2000 with the nomad and onsite. https://www.hamina.com/…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
I leave this dock on my desk most of the time but I don't have the Pocket in it. I created this adapter so I can use it for my phone, small tablet or alternative handheld gaming devices. I printed using PLA at .20mm layer height. I know…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
Following the creation of my Webcam Mount ( https://www.printables.com/model/1353224-magnetic-webcam-mount-for-core-one ) and mounting the Raspberry Pi on the side of my Core One, i wanted to tidy up the cables a bit. Here is the result.…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Compatible for the southern hemisphere only. For the northern-hemisphere version, check here for the correct parts: Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers by 3DMason | Download free STL model |…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
I want to install a reasonable cable management in my 3D printing cabinet. What is closer than the channels to print. Sneakypoo was so friendly to design one that I just had to enlarge. The STL files are not completely bug free so only…
This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:
Correct geometry to a gameboy cartridge. No goofy overhangs and designed with 3D printing in mind. Part is oriented for printing. Just drop in your slicer and send it. Best if printed in ABS on a well calibrated machine.
It's been a while since I shared anything. Model building was on hold for a long time after the passing of my father, the person I learned it from when I was little. I was planning to first draw and build a typical Dutch "opduwer" but…
The “RootCanal” guides the water, you give your plants, directly to the roots of the plant. This allows you to keep your top soil or mulch layer dry, thus lowering the chances of pests like fungus gnats and diverse fungi. The many holes…
Ein Kabelkanal zum ankleben, mit doppelseitigem Klebeband oder Heißkleber. Die zweite Variante kann mit 3mm Schrauben befestigt werden. Das Modell ist 20 cm Lang kann aber im Slicer auf eine beliebige Größe skaliert werden Ein Tipp die…
I know there are a bunch of stands for the Analogue Pocket FPGA gaming handheld, but I wanted to create one for myself. Learn about all my designs at retrofrog.net
Version 2.0 Released! Re-designed the case from the ground up to improve print ability and overall aesthetics. Added several variants including a cable winder, no carts, improved inserts for adapters and button cutouts. --- After getting…
Update 2022-05-12: Design tweaked for the V3 again after some feedback from folks. Personally tested on both Rapidfire + TBS Fusion modules! Update 2022-04-02: MAJOR DESIGN UPDATE! V3 adapter has been overhauled to successfully fit other…
STL with 200 mm length. Update: added 3mf Version.
3 types of D-pads: - flat easy to print. - a standard one. - one compatible with elite controller D-pads. ( let you mount metal D-pad or printed one from the elite controller for replacement or to install them on a regular controller)…
A cozy 3D printable home for your pencils, which is super easy to print. This canal house inspired pencil holder is a fun way to keep your desk organized and tidy. Designed to be printed in a standing position, without the need of…
beefygrip.com Purchase a high quality ABS print (with felt lining installed!) from me, the designer to support this project. (US and International shipping!) This is comfy contoured console style grip for the Analogue Pocket handheld. It…
Quick release (keyed-slot) analog module bay for Walksnail Goggles X and DJI V2. Have a look at the awesome original model first. This remix replaces the main body and the “B” mount adapter plate that gets screwed to the back of the main…
Analogue Pocket Dust Cover
Esta estantería modular está compuesta por módulos hexagonales individuales que se ensamblan entre sí por cualquier lado, formando una estructura tipo panal completamente personalizada. Diseñada para ser fácil de imprimir sin soportes y…
A stand for the Analogue Pocket
I could not find the exact Xbox 360 controller analog thumb stick I wanted, so I created one myself. These are a little bit higher (2mm) than the standard thumbsticks as I preffer them that way. V2 of both files have a slightly thicker…
Matessss! My apologies for the lack of response and the measurement error. I'm uploading the file again in STL format so you can download it without any problems! Greetings, Makers
Status: This is a work-in-progress ("beta version") and updates will be made to accomodate a larger range of camera and lens combinations, as well as other improvements. This is a modular platform for scanning / digitizing analog film…
I designed this display for my Pocket to mimic and honor the design of the official Dock that Analogue sells. Print face down as shown in the pictures No supports needed Printed at 0.28mm layer height (approx 3hr) NOTE: This item is not…
Week Pill Box - Pastillero Semanal
Introduction The original design of the “Sunquest” sundial was derived from a traditional armillary sphere, featuring an axis parallel to that of the Earth and multiple nested rings representing latitude, longitude, the celestial equator,…
This is a reasonably accurate model of an Analogue Pocket created from measurements taken from an actual unit. I used this to sculpt a custom grip. Included is a single combined STL, separate STLs for the front and back halves, as well as…
A simple stand to hold a TinySA ULTRA, there is a slot at the bottom to allow a rightangle USB C charge cable through but this may not fit your specific cable. This is a work in progress and I plan to create another one with a different…
A remake of one of my previous models, now added an attachment cap for PET-bottles. Fits for most soda bottles. You can either screw it on a full bottlle and stick in in to the grount for a very slow and long watering process (perhaps…
canopy and batteyr holder for the analog version of the V2 firefly nano. this has the holder for an elrs receiver.
When your Analogue Pocket is out-of-pocket, proudly populate your pegboard with this stylish bracket. 100% infill is recommended. Pocket not included.
Arduino based shifter/handbrake combo for PC. For this project i got inspiration from Amstudio's handbrake projects. https://amstudioprojects.com/handbrakes/ The Handbrake sketch for Arduino is from him. Arduino sketch for shifter come…
An alternative case for the official GameCube to GBA adapter which fits comfortably in the Analogue Pocket. It reuses the screws holding the original case together. The reason for this case is because even after removing the clips that…
remix of Joystick Savers V2 by Scout339 to fit the Lenovo Legion Go.
Ein Eck Kabelkanal zum ankleben, mit doppelseitigem Klebeband oder Heißkleber. Das Modell ist 20 cm Lang kann aber im Slicer auf eine beliebige Größe skaliert werden Ein Tipp die Teile versetzt montieren dann stoßen sie schöner zusammen .…
Design for the v6.0+ PCB design by Dr. Gusman Does not support board chaining. I would suggest printing the bottom piece with the open side up and the top piece with the open side down. If you have a textured bed, I also would suggest a 1…
UPDATE 7/26/2026: Top Strap with belt clip added Analace, Anelace, Annelas and Aneilect spellings. From Wikipedia: An anelace (or in Middle English anelas) was a medieval dagger worn as a gentleman's accoutrement in 14th century England.…
Inspired by the cover designed by Adam_86. This is a ground up reworking of the RapidFire Cover for the HDZero Goggle Module 'Bay'. Included files - Blank Version, use this to roll your own variations of the cover. RapidFire - Vented…
This is a “will return at" sign with an analogue clock face to inform visitors when you'll return (e.g. to your work place). Also known as “return sign”, “back soon sign” or “be back note". It can be placed on a horizontal plane such as…
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
The original walksnail module has to be removed from the case and inserted in the 3D printed part. the back plate is screwed with long thing screws, I believe I used M1.6x15. Better with self tapped screws since they are just going into…
🖨 Recomendaciones de impresión: Altura de capa: 0.2 mm Relleno: 15–20 % Sin soportes (todas las piezas están diseñadas para imprimirse planas) Material sugerido: PLA o PETG No requiere ensamblaje complejo 🛠 Instrucciones: Imprime el…
About the model Durable cabel hook to route cables along walls/desks or to hang multiple ethernet/USB/etc. cables from walls. I used this to have a place to store cables and as a cable canal were cables can be quickly routed and taken out…
Print standing up with 4 perimeters, and ZERO infill. NEW POCKETS AS OF SEPT-2023 ARE SLIGHTLY BIGGER. Try increasing the size by .5% Use metal M4 bolts to tap screw holes before using 2 M4x6mm NYLON bolts to hold the Pocket in place. The…
UPDATE: Added for rapidfire and eachine pro58. I didn't like the few covers I found for tbs fusion and none of them fit correctly either they didn't catch the notch correctly or broke off making the cover loose or fall off. So I created…
A rotating circular weekly pill organizer divided into the seven days of the week. By turning the mechanism, each day is lifted sequentially. Each day includes its own mini pillbox with three compartments: morning, midday, and evening.…
The “RootCanal” guides the water, you give your plants, directly to the roots of the plant. This allows you to keep your top soil or mulch layer dry, thus lowering the chances of pests like fungus gnats and diverse fungi. The many holes…
Einfache Abdeckung für einen Baummarkt Kabelkanal mit 112mm x 61mm oder 110x60mm
Protects the important bits of the Pocket without adding any bulk. Works best in TPU, for cushioning and no scratches.
Introducing this ToDo list stand that is perfect for keeping track of your daily tasks. Inspired by the Ugmonk Analog stand, this stand is designed to help you focus on your most important work. The stand is suitable for A6 paper cards…
Inspired by PSP 3000 Monster Hunter Analog Stick, I designed one that would fit a PSP 2000. I will continue to update this in the future when I update the design for better comfort. Printed with all default settings in Orca using a .4mm…
These analog hearing aids look great - and they really work! I wear them all the time when watching TV. Also, they are fashionable, especially when you go the extra mile and customize the headband. They are inspired by corkymork's hearing…
Simple desk angled text sign ANAL / ORAL
Overview The Analog Discovery 2 from Digilent is a handy tool for simple electronic experimentation offering a full digital + analog lab in your pocket. Digilent offers a BNC Adapter Board for use with more traditional test probes but is…
This is a 3D-printable hobbyist model. It is not designed to meet military specifications or for use with restricted image intensifier tubes. Users are responsible for complying with their local export and firearm laws." The pictured…
Summary Simply replace your original flat plate analemma part with this curved plate model to improve the performance & aesthetics of your existing heliochronometer sundial. Please note that this design is only compatible with…
I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…
I included the .scad-file so you can modify or add upgrades yourself if you like. It is drawn from scratch, but inspired by some other designs from the web. Use some M3 screws with about 6 to 12mm length to secure the whole assembly.…
Subhanallah "Glory be to God" or "Allah is perfect" EDIT: Do let me know if theres any issues.
