721 models
Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Printable tank model from our massive military sandbox Arma 3 . The tank turret can rotate freely. A licensed variant of the original Russian design operated by the elite of CSAT armored forces. The tank is equipped with a high velocity,…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
This lamp shade was designed to look awesome in every modern interior. At 20cm on all axis it nicely utilizes the whole printing surface of Prusa printers. The model is to be printed upside down on a cylindrical support. This support is a…
Print approx. €15.25–€18.63 excl. taxPreliminary estimate for one variant
Isagi : Blue Lock : Manga
Print approx. €5.76–€7.04 excl. taxPreliminary estimate for one variant
Info: I remodelled original “nerd glasses” from @Miguel (thanks for the model!) the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Apple Airpods Max Headphone Hangar Printed in Prusament Recycled PETG .2mm layers 20% gyroid infill Printed flat on the closed back I carefully measured and modeled a hangar for Apple Airpods Max noise-cancelling headphones. When in…
Print approx. €3.71–€4.53 excl. taxPreliminary estimate for PETGSource material: PET
This is the old version - see my latest, upgraded Version 2 . Hangable filament waste bin inspired by some IKEA wall organizer boxes that I saw once, but couldn't find one later. The bin can be easily removed when you need to empty it,…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Small display shelf inspired by the hangar of an imperial star destroyer from Star Wars. Designed for vase mode. 18cm x 16cm x 10.2cm on the outside, about 17cm x 13cm x 9.6cm on the inside. It barely fits on a prusa mini. Its sturdy…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
This model uses very little filament and the result is very interesting (in my opinion) and protects my airplane models from dangerous hands. Additionally, gives a kind of “diorama look” to the models. This model was printed using a 0.8mm…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This Roku remote holder is designed to be hung from a hook or screwed into the wall with standard drywall screws. The hole in the front was designed to use your thumb to slide the remote out if it is being hung and cut aways at the top…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
Better optimize your Manga Bookshelf by using this riser to view books that you have in the back. Fits most standard sized manga books. Sized to lift manga books by 4". This is to better suit my bookshelf. Riser dimensions 6" wide X 5"…
Print approx. €12.48–€15.25 excl. taxPreliminary estimate for one variant
Solve the initial puzzle, assemble the robot following the instructions in the .PDF file, understand the basics of mechanics and its problems, once assembled, solve the kinematics problems that engineers have to face to make a manipulator…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Link to improved version Small display shelves inspired by the hangar of an imperial star destroyer from Star Wars. Designed for vase mode. Its 18cm wide, 16cm deep and 10.2cm tall on the outside. (It fits barely on my prusa mini.) The…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Better optimize your Manga Bookshelf by using this riser to view books that you have in the back. Fits most standard sized manga books. Includes front and rear bookends. Sized to lift manga books by 4". This is to better suit my…
Print approx. €17.18–€20.99 excl. taxPreliminary estimate for one variant
Better optimize your Manga Bookshelf by using this riser to view books that you have in the back. Fits most standard sized manga books. Includes front and rear right side bookends. Sized to lift manga books by 4". This is to better suit…
Print approx. €17.13–€20.94 excl. taxPreliminary estimate for one variant
SAMLA HANGA is a hanger for the very popular IKEA SAMLA storage boxes, allowing you to store 4-5 spools of filament without any screwing or drilling. It is based on "IKEA Samla box as Filament Storage" by Gnevko, but doesn't limit you to…
Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant
Remixed version of Gangar that is 1/2 size and with a base added to be used as a pawn or tabletop miniature
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
I recommend printing perpendicular to the printing plate, many more details will be preserved, there are not so many visible layers. The model can be printed without infil .Other models are in the mountain collection :…
Print approx. €8.54–€10.43 excl. taxPreliminary estimate for one variant
This is a simple manga shelf.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Colorful folding Christmas decorations. Three sizes. A bit of patience is needed for the assembly. Superglue can help for sticking together but it is not necessary if you bend snap ends and slide them into the lower part.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
- One 3D file = Two 3D prints - _____________________________________________________________ MangaBox - Standard Size Manga's dimensions : 118x16x181mm maximum 2 Prints of MangaBox - Standard Size To add : 2 plexiglass laser cutted 3 mm…
Print approx. €7.52–€9.19 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White…
Print approx. €8.49–€10.37 excl. taxPreliminary estimate for PETGSource material: PET
A simple hook/hangar for the back splash of a cubicle. Using the 9mm large T nut, I simply extruded a hook that was dimension to the thickness of the cube wall.
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
This box gives storage for seven fully assembled Nextruders (incl. nozzle,,heat pill", thermistor, heatblock, silicone sock). I liked the idea of @dteng and modified it to my needs. I extended it to fit onto the top edge of the O riginal…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Simple desktop stands for Tangara music player. Taller has a slot for USB-C cable for charging the device while you play music. You can easily decorate the taller one with for example guitar pick like seen in the photos - check my other…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
Abstract Minimal Animals – Set 4 | Australian Wildlife Discover the unique wildlife of Australia with this collection of four cute geometric low-poly animal figurines! 🦘🐨 Abstract Minimal Animals – Set 4 includes four distinctive…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Universal hangar hook. can be used for hanging just about anything, off just about anything else. have included several versions with nail holes but can just as easily be held by command strips. Also included is a v design for hanging…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
Modern Christmas Angel ornament, has a small loophole on the back to hang it in a christmas tree as decoration. Can also be put on furniture or on top of a battery powered tea light, for a cosy light. Model is 82 mm tall Printed in PLA,…
I designed this impressive Gundam hangar, which consists of several standout features. Let me provide you with a detailed description: The hangar is a spacious interior space. It is surrounded by seven walls, which rise up and provide…
Experience the peak of freedom with this Gear 5 Luffy figure! Capturing the iconic 'Sun God Nika' laughter and fluid cloud effects, this dynamic sculpt brings the most legendary moment in anime history to your desk. Designed with sharp…
Created by SD3D_KONG and originally posted on Thingiverse (https://www.thingiverse.com/thing:2791853). It's an awesome print so I'm sharing it here so more people can discover it, but please take the time to check out the original post…
This bookshelf riser will help you see the books or manga that are behind others
An articulated Kangaroo with 12 joints that prints in place without supports. No assembly required except for the removal of the 2 supports included in the model (for tail and neck). About 18 cm (7 inches) in length depending on how you…
Clips around oval pool railings. Print in petg and strengthen the high stress area with more infill. See this done in the 3mf file for my prusa mk3 Bestway 15125 16ft x 48in Power Steel Round Frame Above Ground Pool Set Print Settings…
📚 Vertical Manga Display Stand – Showcase Your Favorite Volumes I created this minimalist vertical stand to highlight special manga volumes in my collection — the ones that deserve to be seen front and center. Whether you want to display…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
HIS STARS HIT FIVE AND HE MADE THIS ACTION FIGURE!!!! (USE SUPPORTS!!!!) Soon Adding Face / screen art for now it would look better if hand drawn!
Made these when I couldn't find strong enough manga/book risers for my use in my IKEA BILLY bookcase. I wanted to have an entire row across the back risen high enough room to read the titles (6cm high). I also wanted rows across the…
Manga storage elements that can be stacked, placed on a piece of furniture, or hung on the wall. Side and corner clips allows to connect them in any way you want! Fully parametric in FreeCAD.
Use the file DisCore38 and put on top the car brand of your preferrence. Printing with PLA no support, 0.2mm resolution. For printig two colour version stop the first colour at 2mm of the brand logo change colour and continue to print…
Bring a touch of fiery elegance to your space with this striking 2D phoenix wall art. This single-piece model captures the graceful power of the mythical phoenix in a bold silhouette that's perfect for any wall. Whether you're decorating…
A bouncy little kangaroo with a rounded belly, tiny arms, and oversized feet for that classic toy feel. With dot eyes, upright ears, and a soft, curved tail, this design brings vintage charm to life. Finished with a smooth 3D printed…
cool submarine made by dylanheyes
Info: another model of glasses with interchangeable lens with different patterns the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…
Hangable Filament Swatches These filament swatches build on the great Mini Filament Swatches by FrostbiteDesign , and are designed to fit within their great storage boxes. The Numbers & Layers Area The numbers in each section of the…
Requires supports to print
This is my version for a Manga Riser in my Billy Ikea. Print in PLA / 25%, and need 4 of them to fill one board.
This print in place articulating kangaroo fidget toy is perfect for kids and adults alike! Best printed with 3 walls for strength. Hope you like it! For those who have joined my club at the “Obsessor” tier or have subscribed to my…
sexy girl doing yoga in the Cobra pose (Bhujangasana)
A great way to keep your air tools at the ready.
This is a wall-mounted trash can to put your leftover filament in or to collect other waste. The easy-to-use hanging system allows it to be placed on horizontal and vertical cement joint lines. This trash can has a capacity of 10 cm deep…
Manga Model Girl If you liked this model, a coffee is always welcome ☕🙂 buymeacoffee.com/goodbuyerclub
Riser for Manga that fits perfectly into IKEA Kallax. You need to print this 3 times to cover full width of the Kallax box. You can fit 6 vols of Kaiju No.8 on 1 riser. Theoretically height could be tweaked so you could add third row of…
Just a quick hanger/clip for grow tent poles (16mm, most common size). Works well for trellis support, and LST anchoring. Recommend adjusting print height and fill based on strength needs (whatever you're tying down / supporting) These…
I recommend the M3x12 screw mounted version, but a hex post mounted version is also available. Post mounted version needs supports, but screw mounted version does not. CAD:…
Print with 0 top and bottom layers, 4 perimeters. I think 25% honeycomb infill was overkill, will likely look better at ~10-15% PLA is fine, (snug) supports required This is remixed from: https://www.thingiverse.com/thing:5207720…
It holds ball caps. F3D included so you can make whatever changes you like!
Add a touch of festive magic to your space with this charming Christmas dwarf model. This design captures the graceful and joyful spirit of the holiday season. Perfect for seasonal decor, gift-giving, or adding a cozy winter accent to…
I designed this train shed to be compatible with Brio / Ikea train set. All the parts are glued together I reused these Hinges https://www.thingiverse.com/thing:2097921 these tile https://www.thingiverse.com/thing:488914 and these tracks…
Version 2 of the OceanGate Titan submersible. With new details and better proportions, and most of all, the wiring has finally been added. More realistic parts and print optimization have also been implemented. Do not reupload this or…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
This is a simple and practical book riser designed to create a second row of books on a shelf – because hiding books behind other books is a crime.🙂 The riser is modular and consists of: -a center part (no side walls) -a left wall -a…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Hi with help of AI, I made swanga's rims.
I really liked the reduced filament scraper by @Wildcat , but found that the slot was not large enough to actually hang on any hooks.
This is a modification of SAMLA HANGA by jan Grewe. It is a holder for a dry box solution using an IKEA 22L SAMLA box. The SAMLA HANGA by Jan Grewe ( https://www.thingiverse.com/jangrewe/ ) has a very nice design. But some weak points…
Designed for 3" Clay Shooting Targets. Fits snug so it won't blow off in the wind. I've also included a laser cut file as well. Printed in PETG, 100% infill, took around 20 mins. Laser cut was 1/4in wood and about 30 seconds. haha. I…
The Flexi Kangaroo is a fantastic starting project for 3D printing enthusiasts looking to explore the capabilities of their printers. As an articulated model, it has interconnected parts that allow the kangaroo to move and flex,…
A simple mounting bracket that clamps onto the ScanGauge II with a 10 degree angle (this can be modified in the attached .f3d file) to better angle the screen towards the driver when mounted on a declined surface on the dash like the…
This charming 2D heart design features delicate floral details embedded within the shape, making it a perfect decorative piece for any season. This hangable ornament is easy to print, lightweight, and ready to display right off the build…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
A small wall-mounted print with hooks for hanging your keys/mask/etc. as well as a small shelf for a wallet. Intended for use with those 3M adhesive wall-mounting strips
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
This bookshelf or slipcase is 17 cm long and 18 cm high. On both sides, there are support walls so that the manga can stand upright. There is a top plate where manga can also be placed without pressing down on the ones below.
Help created with AI. New design Hope you enjoy Please leave a comment
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
First of all, I am not the original author. I didn't want a pipe to attach with screws. Unfortunately, the only model here is not what I wanted. I found what I was looking for on Thingiverse, I think it should also be available here as an…
25 cm (almost 10 in) shelf, with holes for screws. Made for storing your favourite Manga books!
Add a touch of nature's charm to your space with this intricate 2D bee wall art. With its detailed wings and bold silhouette, this model beautifully captures the delicate yet industrious spirit of the humble bee. Perfect for brightening…
You've got all of the models from the “Making 3D prints actually waterproof” video. Have fun and be responsible of course.
This is a remix of ToolsToMars "Fall Leaf Decorations" model.
Bring captivating anime charm to life with this stunning 3D printable figurine that captures every graceful detail in perfect STL format. This elegant anime character model showcases beautiful flowing hair and dynamic pose, making it an…
EDIT: Originally I've printed it with PETG but it started to bend. PLA might be a better choice. I will be revisiting this model and with some fixes. Material: PLA Brim: yes (I've used default 5mm) Infill: 0% Print time with IS: ~1.5h…
The model submersible is scale 1:42 My regards to the families of those involved in this tragedy. What happened was very unfortunate and I don't want to minimize that. The model has two versions, one with a cover for the thrusters, and…
full guide on: https://learn.adafruit.com/3d-printed-daft-punk-helmet-with-bluetooth Build a Daft Punk Thomas Helmet with bluetooth control! In this project we'll build the iconic Daft Punk Helmet with the ability to change animations and…
An articulated kangaroo
Bring your favorite anime universe to life with this stunning 3D printable figurine that captures every detail in perfect STL format! This beautifully crafted anime girl model features flowing hair, elegant pose, and intricate character…
A minimalist hard case for the DJI Neo. The lid snaps shut magnetically, and there's a sliding hatch to enable charging of the Neo inside the case. The case has been designed to fit the drone with prop guards and gimbal cover perfectly so…
A carved figurine of an Australian jumping mouse. Tree supports come off easily. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Simple Kangaroo Whistle to keep Kangaroos away from your car. Basically accelerates air down through it and creates a high pitched whistle to scare away the hoppy bastards. Simple, common design often seen on cars. Have added holes for…
This is a remix of johann517's excellent G-Clamp ( http://www.thingiverse.com/thing:1673030 ). I've made the clamp double-sided and added a ring that can be used to hang it (e.g. suspend from a ceiling). It's useful for all sorts of…
Transform your space with this stunning 3D printable Sailor Moon figurine STL model that captures the iconic magical girl in all her glory. This graceful statue showcases the beloved anime character in her classic pose, featuring flowing…
Unleash the power of the legendary Saiyan warrior with this incredible 3D printable figurine that captures every muscle and detail in stunning precision! This dynamic STL model showcases the iconic martial artist in his classic fighting…
Bring a touch of holiday mischief to your space with this fun Grinch 2D hangable model! Designed for easy printing and effortless assembly, this multipart design snaps together securely—no multi-color or multi-material printer required.…
I remixed this to fit 22mm grow tent poles which is commonly used in AC Infinity tents (among others). I printed this in PETG and it uses roughly 5.3grams of filament .20 Walls: 3 15% Gyroid
![Modular manga/book storage/shelf [FreeCAD | parametric]](https://media.printables.com/media/prints/813488/images/6288246_43e866f9-beb9-47da-9cbf-9b26a82be47b_3de6fa34-3789-466e-9521-5b25360c15a7/img_20240321_080858.jpg)
![HSW Cable Hangar [Honeycomb Storage Wall]](https://media.printables.com/media/prints/617503/images/4904300_4510f89a-c39a-440a-bf29-f000333af871_dbe6662b-61a9-4aac-828a-c06a75ed6dc0/pxl_20231017_193814064.jpg)
![Daftpunk Helmet [Thomas Bangalter]](https://media.printables.com/media/prints/7156/images/50835_a09826a7-6b83-4f26-af9f-b181e4214238/hero_ex_6_7156.jpg)
