Counting matching models…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
Update 08/06/22 - Updated logo to match Bambu Lab Logo. Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs: 1 - No supports necessary. The logo is now raised, which removes the need…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Join the Patreon or Printables club! Or checkout my paid models ! The truck has a working lever for picking up the trash can and dumping its contents, a working back door, and rolling wheels for added functionality. The trash can also…
UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing: V1.0 is…
Update Jun 02, 2025: I removed the Printer'n Beer tag that was on the side and put it on the back. So the tag is no longer visible once installed. Update March 13, 2025: A version with a dedicated slot for each tool provided with the…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
An easier to empty poop drawer for the Elegoo Centauri Carbon. Covers the factory poop door, and a nice drawer slides out the side. Mounts with the existing poop chute screws, and one replaced chassis screw. Use an M3x10mm screw on the…
Scarbo SVF1 Model has functioning doors, suspension, steering, shifting and moving engine pistons. Based on a modern replica of 1967 Ferrari 312 Formula One. No supports, except for the exhaust pipes. Everything is designed to be simply…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
This remix arranges the eight parts of the Elegoo Centauri Carbon Riser (originally STEP files) into a single print plate for easy printing. The STL file contains the pre-arranged layout. (Note: The STL may import as a single mesh in some…
A fun little marble maze. No supports required, and assembly is 100% snap-together using ball and socket joints. No hardware or glue required. Requires one marble (not included). Parts base.stl - 1 maze.stl - 1 axle-cam.stl - 2…
Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…
This is a tool tray designed for the Elegoo CC that mounts to the Spool side of the unit. This does Not use magnets but uses two of the CC's side panel screws to mount it. Longer screws are not needed. Note: This is an original design and…
Introducing Apex—an entrancing 3D printed marble machine. Watch the marbles carefully as the spiral lifts them up, and they weave down a plinko board, stairs, and various other tracks. The machine uses 8mm or 5/16" marbles (the…
NOT my WORK and NOT a REMIX All credit to @MEsteban77 @ Cults 3D https://cults3d.com/en/users/MEsteban77 I struggled to find a model of Han in Carbonite I was happy with until I found this one on Cults; thus sharing here for this…
EDIT- I've recently purchased some P1S machines and this model works fine on them but I plan on updating the model to work better on them and also incorporate different slots than the original, if you have any specific requests for slot…
Screen Accent for the Elegoo Centauri Carbon.
This is a high-power flying propeller disk launcher, that uses a compound/stacked planetary gearbox with a ratio of 1:64! (x4 each layer) Video of it in action: The gearbox layers print-in-place, and are designed to easily assemble with…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
Meet Barbara, an adorable capybara with an oversized snout and a cute, chunky shape that's perfect for animal enthusiasts looking for a touch of wildlife. Her smooth lines make her the perfect companion for beginners and experienced…
This is a simple dual-bearing spool holder for the Elegoo Centauri and Centauri Carbon. Required hardware 608 bearing, x2 I strongly recommend using greased bearings. The grease provides some resistance which helps to slow down the spool…
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
On the new ELEGOO Centauri Carbon's the PTFE tube running into the print head is way too kinked and causes loading and printing issues. If you have one of these machines please snip the small zip tie at the end of the tube guide and…
This is a HEPA filter option for your Elegoo Centauri Carbon 3D Printer There are two print model options for you to work with Is a magnet option that works with 2mm magnets you can easily place it on the back when needed is an option…
This is my recreation of a towel hook with a ball I'm sure I saw on printables but are now unable to find again. It uses a ball thats printed in place to pinch the towel and hold it. The ball needs supports, otherwise they're not needed.…
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style. The linear advance (flow calibration) is not…
I wanted a simple and quick to print tool caddy, that can hold all the included tools for the Centauri Carbon printer. Plus a pair of flush cutters. The tools are organized, with the most frequently used tools towards the front. The…
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
This model is a very compact motor-reducer, with precise movement and without backlash. The overall height is 29mm, only 6mm more than the motor shaft. The reduction ratio is (1 + 38/14) : 1 , roughly 3.7 : 1 Print instructions The model…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Say goodbye to dirty earbuds with the Earbuds Cleaner Tool ! This dual-sided design features a brush-like surface on one end for removing earwax and…
Here are a set of files I made to bring Gridfinity to the new Harbor Freight US General Mini Toolboxes! There are 3 grid base files that will allow you to add your own gridfinity organization to your mini toolboxes you can also split the…
The model holds all the accessories. It's available in 4 variants. I would recommand printing the variant that uses the integrated screws. This is due to the weight of all the accessories. Model has been updated with better holes for the…
This pair of Barbie heels began as a special request from my granddaughter, who wanted new shoes for her collection. Choose your favorite color and scale the model in PrusaSlicer to fit your doll’s foot size. Printing Instructions…
SE3D Toolhead Cover for Elegoo Centauri Carbon Before you grab this version, check out v2.0 . This is a redesigned toolhead cover for the Elegoo Centauri Carbon that improves both print quality and day-to-day usability. Key improvements:…
This is the original Z axis cover for the Bambu Lab X1C ! :) These Z axis covers protect the top F625Z bearings on the threaded Z axis rods in the Bambu X1 and X1 Carbon… The walls are pretty thin… so, you may need to enable “Detect thin…
Current Version (v3) Notes: Changed default model orientation on slicer import to reduce confusion and broken snap fits This model was designed to help reduce instances of purge waste being flung back into the print area. The models I…
Print in PLA No supports needed Just glue Face and Tray together Hold at the printer by 10x2 magnets Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm
I am space limited due to a shelf above the Centauri and I plan to use it primarily for ABS / ASA prints so I used Prusa Slicer to chop off the vents but retained the angled shelf to add in led light strips. The Centauri Carbon is dark…
NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…
Poop chute for the Centauri Carbon. The model does not require supports when printing. This poop shoot does not need to be screwed into the back of the machine, so can be easily removed to empty out the tray.
This is a refillable alternative to the original activated carbon filter by Bambu Lab. Just fill the box with activated carbon (I bought mine here: https://amzn.to/3lYflF9) , and you are ready for another 60 days of printing. As shown in…
Update Jun 02, 2025: I removed the Printer'n Beer tag that was on the side and put it on the back. So the tag is no longer visible once installed. I added slots for all the tools provided with the Elegoo Centauri Carbon on my base, which…
****UPDATE 2**** I included another STL with the air outlet moved over and away from the poop shoot for those that are enclosing the the poop shoot. ****UPDATE**** ****Please check last pic on where you do NOT glue magnets in as these are…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
partage d'un ficher payer imprimable en PLA ou resine, support obligatoire
"horse" by stronghero (AyathTheLoafer's rimix) https://www.thingiverse.com/thing:2438365 Print instructions Printed with ZIRO Marble PLA @ 225C
See the update below… This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design. The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The…
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
This is a little slide for the Elegoo Centauri Carbon to move the CC MINI to an easier to access place. Note: the CC MINI model is available separately (from Elegoos website and from the USB stick that comes with the printer). There are 2…
Minimalist top glass riser. PETG. (Overture PETG Black). Nothing special. Just basically used stock settings on Bambu to print this!! :D No supports necessary. Supports 8 or 10mm LED strips that stick to the inner sides. Has a 4.25mm hole…
NEW UPDATE: Behold an improved and raised version! I extended the bellow section to add one more to prevent bottoming out during Ludicrous mode prints Added more thickness to the adapter interface for more high frequency vibration damping…
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
This door holder is specifically designed for the Elegoo Centauri Carbon enclosed 3D printer. It allows you to securely prop the front door open at a fixed 10-degree angle. Purpose Provides slight ventilation for the print chamber when…
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
This is an update to the provided scraper holder provided by elegoo that allows you to magnetically attach the scraper to your printer. Two options provided one for larger and one for smaller magnets Link to the smaller magnets -…
A bird whistle that you fill with water to make a warble bird whistle. Original whistle by AdamStag: https://www.thingiverse.com/thing:1155687 Remixed by ArtistciMusician: https://www.thingiverse.com/thing:5405003 Then remixed again by me…
ALERT: If you use letter ‘g’ then change $fn=32 to $fn=15 This is a custom name tag / key ring charm generator using OpenSCAD with Barbie theme. These tags can be used for bags, phone charms, luggages, key chains, etc. Steps to Create a…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I found a couple of rails here on thingiverse but wasn't satisfied with the performance results when building a track with it. Therefore I designed my own rails from scratch, including a 4 and 5 tile overspan. Check those YouTube movies…
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
A filament dry box that mounts to the side of the Elegoo Centauri carbon based on the design of @NaNO3 which was originally based on @Yanev 's parametric toolbox. I have included versions for the lid that work with or without the addition…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A barbie sized toilet. Use 1.75mm filament for the hinge. Support / Reseller If you want to support me or sell my models, take a look at my Patreon: https://www.patreon.com/thomash3d You can also send me a tip on paypal:…
This is a marble machine with a lift that lifts three (or more) marbles simultaneously, and releases them to three separate tracks. Two of those tracks are connected in series, so a marble will therefore alternate between those tracks.…
I was looking for a keychain that looked like the starbucks tumbler. I found one that looked ok, but the through hole for mounting to a keychain was just all wrong. So I created this model from scratch in Blender. Its a cylinder that is…
Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Medium Waste Bin Prints without support, perfect for your desk. Notes: All parts print without support.…
Poop Bucket / Waste Catcher that can be attached to the two screws on the backside Included 3mf files have all the right settings to be used in the ElegooSlicer Printed the smaller version, bigger version also included Partly created…
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print. For Batch 3 I modified the base. Enjoy it! Any…
No supports needed. The back wall of the closet is 1.5mm thick, so at 0.25mm layer height and 3 solid top and bottom layers, it will print solid. The rest was at 15% fill. The doors' edges may need a bit of sanding to slide smooth.
Start + End Gcode for the X1 Carbon that significantly reduces the time to start printing without damaging your build plate, and making sure the nozzle is well primed to give a good first layer. The stock Gcode heats and cools the nozzle…
Hilbert Curves https://en.wikipedia.org/wiki/Hilbert_curve are funny and convoluted curves that (on their ideal and final configuration) fill the space. Brains and guts and other biological tissues are similar (they tend to maximize…
Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…
This is a print in place stand for your extra buildplates for your Elegoo Centauri Carbon or Elegoo Centauri 3D Printer that holds the standard 256x256 sized buildplates. Prints in place, no supports needed 10-20 infill .2 layer height 5…
Update 16.04.2020: found on Youtube a track with the curves I've seen some curve tracks, printed and tested them. Then there were some thoughts in my mind, which curves, with which radius and angle, will be possible and useful, and can I…
🇬🇧 Description This model has been designed to allow the use of the CANVAS system on the Centauri Carbon 1 , while keeping the printer fully enclosed using the original top glass. The riser lifts the lid to provide clearance for the PTFE…
update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…
Die Bahn ist etwas leicht. Wenn die Kugel zu schnell ist, kann es sich aus der Grundplatte heben. Wenn eine oder 2 Platten neben die Achterbahn gesetzt werden ist es recht stabil Auf Thingiverse gibt es ein Model mit Baumsupport. The…
Hi, This is my version of garbage bag holder. I sticked it with double sided tape on upper side of my cabinet. You can place it also on side. I prepared several models, inner diameter 51mm and 68mm and 51mm dual holder. Also you can…
This is a sphere printed in two parts with a threaded connector to attach each piece. Its design allows printing without supports, which gives a nicer finished look to the part. You can also mix and match colours! Use a dab of super glue…
Also available through the opencentauri CAD github Live interactive model you can link into Fusion 360 on the Opencetauri Docs . Community Centauri Carbon CAD model with many contributions from in the Opencentauri server as well as…
This is the first model I have made or printed myself. I did 3 walls and 15%infill, could probably get away with less. Feel free to remix and make it better. I made this with Tinkercad, so my knowledge is very limited. Added a second…
Print the barbell part 2 twice and use part 1 to connect the 2 pieces. Enjoy! :) Benchpress: https://www.printables.com/model/1003773-mini-gym-benchpress-my-pr-bench-press
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
Introducing the FDM (Fixum Dude Motors) print in place garbage truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
Removed the text and added Elegoo Logos
Robert's simple, elegant design just needed a little tweak to keep my recycled plastic shopping bags from getting sucked out the window when I accidentally open it too far. My fix is a less-than-elegant TinkerCAD booger weld job.
no supports needed. prints well under most settings. stl for single color and multi color prints in files. Use filament for lid hinge with balled/flattened ends. Edit1: fixed a slicer error. repaired model and reuploaded
Screen cover for the Elegoo Centauri Carbon, available with or without the Elegoo logo.
We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts…
GENERAL The model is designed to be (de)mountable with allen bolts and nuts. As such the finished model is very suitable for educational purposes. Engine A Overhead Valves engine is an internal combustion engine with the valves placed in…
