18,637 models
This is not an easy print. Your printer MUST be dialed in well. If you aren’t sure about your printers tolerance abilities, print this first- https://www.prusaprinters.org/prints/127569-s-shaped-tolerance-test-01-04mm-in-002mm-increment…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Extra strong wall hook collection - 6 variations + STEP file
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
Print approx. €7.83–€9.56 excl. taxPreliminary estimate for one variant
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Thanks to https://www.thingiverse.com/STTrife for posting this, i wanted some variations that were larger and fit the existing locking locations. These are printed and can be stacked with existing storage boxes. See his excellent write-up…
Print approx. €23.40–€28.60 excl. taxPreliminary estimate for one variant
Mario cookie cutter
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Printed on Prusa Mini+ Nozzle 0.4, PLA 0.07 ultradetail mode (0.1-0.12 should works too) Please set the flow for 90% Print it slow! 20-25mm maximum is recommended. Dimensions: 8x22x7mm You like it? You can buy me a coffee 😉…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This is a practical, printed 608 Bearing suitable for many DIY projects (for example in a spool holder). It is a fully functional roller bearing with a proper working cage. It runs like a real bearing with a smooth action, tight fit & low…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I wanted a little filter holder for my Hario V60 coffee filters, and needed something different from what I could find here. My design criteria: horizontal access to filters (will be located in shelf inside cabinet) slightly angled to…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Generate working or placeholder bearings of any diameter. Use OpenSCAD to generate any size bearing. (Imported from Thingiverse. Originally published: 26 Aug 2016) Print Settings Rafts: No Supports: Depends
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
Wallart or decoration of the mighty Spitfire. Very simple print, fits diagonally on the build plate of both Prusa and Bambulab printers (both versions are in the files). Can be scaled up (original model is aprox. 1m long and 7mm thick -…
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
Printed with 0.2mm layer height.
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
The angled mount hole centres suit a Ring doorbell generation 2 model with holes centres of 44mm (width) by 87mm (length). 2.0mm mounting hole may need opening up to suit non-OE screws Recommended lay height of 0.2mm (Speed) and 100%…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €17.13–€20.94 excl. taxPreliminary estimate for one variant
🌊 🐠 Welcome Under the Sea! 🧜 🔱 You have the honor of visiting King Triton's Palace Under the Sea!! A majestic building of towering spires and impossible arches awaits your gilled friends. Dive in to learn about the features of this…
Print approx. €4.17–€5.10 excl. taxPreliminary estimate for one variant
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
I've been enjoying making nooks and places for my shrimp and fish to hang out in. Caves are a great addition and really expand the unused space of the substrate.
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) An automotive icon reimagined as a modern design piece. Presenting the Ferrari F40 3D model, uniquely adapted for wall mounting – this is more than just a replica of a supercar, it's a bold…
Print approx. €14.30–€17.47 excl. taxPreliminary estimate for one variant
A set of several messy bedrolls featuring messy blankets, pillows, and textures. These are great scatter because they are print-and-forget, and feature enough texture that you can get a lot of life out of them with practically no painting…
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant
This is an improved filament spool holder for the Anycubic Vyper or Creality CR-6 SE. It fits and locks with the original spool arm provided by Anycubic or Creality. Parts required 2x 608ZZ bearing 1x Spool Holder v21 (0.2mm layer height)…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Small cap for quickly greasing LM8UU (8mm), LM10UU (10mm), or LM12UU (12mm) linear bearings. The cap is designed to attach to a 3oz tube of Super Lube Synthetic Grease* and fits inside the linear bearing. Line up the holes in the cap with…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
A perfectly designed gear bearing that is made to have minimal friction and is easy to 3D print it can also spin for up to 7 seconds! It's quick to print coming in at under 2 hours. This print also is beginner friendly and has a big…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
I have constructed a box here that can be changed via parameter input. You can download the file and change it via Fusion 360 or similar via the parameters. Make your own boxes sizes as you need them as in the picture above. Ich habe hier…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
To print this you can choose the group you want, load in your filament, print the group.. rinse and repeat. settings for gcode files filament > PLA nozzle ø > 0.40mm layer height > 0.15mm infill (general) > 10% gyroid infill (special for…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Like the original supplied, my model has an end-stop in the flange to prevent it from falling off due to turning too far. I have completely redesigned this holder, which has allowed me to create different lengths and refine the mesh…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for PETGSource material: PET
🫧🪸🐚 Ahh… Bikini Bottom: Ze Home of Beloved Aquatic Cgeatures 🧽𓇼🐙 🐿 🦀 There are plenty of pineapples, moais and rocks under the sea—you can find those anywhere. But… have you been to the actual Bikini Bottom? Print this whimsical…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
3D-printed wall-mounted holder with a two-part design. The holder consists of a U-shaped base that is attached to the wall and a insertable component with two holes for screws or bolts. The insert pieces are made to slide into the base…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Please click if you appreciate my work :) The Ferrari F40 is more than a car – it’s a legend. Now you can bring it to your shelf, printed by your own hands. Clean geometry and clever part separation make the build process smooth and the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Salut, Voici un système de boîte de rangement à assembler et à largeur variable. Pour créer la boîte : Imprimer les 2 cotés grâce aux fichiers “coteD” et “coteG” Imprimer la traverse à l'aide du fichier “traverse” → Pour régler la…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Great keychain for Leclerc / Ferrari fans. There are 2 frames (with names or not). You can print which you like. I recommend printing the frame at 0.1mm thickness so that the keychain side is more solid. The inner part is same. It fits…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
I've designed a collection of simple, round plant saucers to complement your gardening needs, focusing on both aesthetic and functional versatility. Each saucer features a unique rim profile, allowing you to match it seamlessly with…
Print approx. €8.11–€9.91 excl. taxPreliminary estimate for one variant
For all Warhammer 40k players who want to carry around their CSM Combat Patrol! This is a small board that holds all 10 Chaos Space Marines, 5 Havocs, the Dark Apostle and Disciples, and Hellbrute. At worst you may have to print it at…
Print approx. €10.42–€12.73 excl. taxPreliminary estimate for one variant
This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to make my own print-in-place 608 ball bearing for my Ikea Samla Drybox so that all the necessary parts can be printed down to the IkeaBox. I modeled it in Fusion360 and so I can offer it to you as an .f3d file so you can easily…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for PETGSource material: PET
Adapter für eine mobiles Klimagerät zur Durchführung des Schlauchs in einem Velux Dachfenster GGL 406 3059 B 19 AG04-V. Breite ca. 860mm Diesemal ist der Adapter variabel. Die Breite kann eingestellt werden zwischen 713-1000mm. Der…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for one variant
Use the 3mf file. I use a 0.6 nozzle, make sure you adjust that to your own nozzle. The end of the tweezers has a cup that will allow you to grab different things and hold them more easily. 4 outer walls, 5 bottom, and top layers Infill…
Print approx. €2.90–€3.54 excl. taxPreliminary estimate for one variant
Roaring Twenties / Flapper / Deco - Hair Pin. \ Gcode has 4 color changes. No need for multilateral.. just change at z height built into g code.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Saw simple version of a dicetray on reddit, and was inspired to design version with a magic/alchemy theme. Made in blender, printed in eryone sparkly purple (octarine?) PLA. Holds up to 14 dices (25mm). The slots have symbols of alchemic…
Print approx. €8.07–€9.87 excl. taxPreliminary estimate for one variant
Carabiner mug with various images Nice little 300 ml mug that you can attach to the outside of your backpack with the carabiner. Note: Only use food-safe plastics Clean and disinfect thoroughly before use Model printed with: Prusament…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
This is my remix of Linear Bearing Greasing Cap by walter to fit on small 12g tube of Super Lube. It is only for LM8UU (8mm) bearings. You have to cut off the tip of the tube just above the thread like I did (check pictures). I have…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
A simple but beautiful wall mount for LEGO set Ferrari 488 GTE: https://www.lego.com/en-dk/product/ferrari-488-gte-af-corse-51-42125 Printed in PETG with 0.6 Nozzle 2 perimeters 20% infill gyroid. Hole though is 6mm while the counterbore…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
A collection of Headless Slotted screws according to ISO 724 , ranging in sizes from M2 to M12, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
A Lithophane in the size of 110 x 110 mm depicting the Carina Nebula that was captured with the James Webb Telescope . The Image of the Carina Nebula is framed in a hexagon grid resembling the James Webb Telescope. It consists of two…
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
A few of the eye designs found in the Naruto series. Print instructions Switch from red to black at 1.7mm. Glue a small 7mm magnet on the back side to complete.
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
A rose for every woman in the world! I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Ironing: Topmost surface only Languages available: Portuguese, Czech, Spanish, English, Dutch, Deutsch, Italian, Romanian, French, Dansk…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
This tool has been designed to easily create a standard MFT like workbench and drilling 20 mm holes every 96 mm. This drilling jig has been printed in Prusa PETG from the the STL found on Thingiverse with supports. All details in 3MF file.
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for PETGSource material: PET
I made the Ocarina Of Time by: Zuza awhile ago and it came with a stand, but I didn't print it right away because I wasn't sure if I would get into playing it. I started playing it quite a bit and thought it was time to print the stand. I…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This is a photogrammetry scan of the bust of Yuri Gagarin, the first man in space. The original sculpture was created by Aleksey Leonov in 2016 (the sculptor, not the artistic cosmonaut ). Bronze castings of this statue can be found all…
Print approx. €4.07–€4.97 excl. taxPreliminary estimate for one variant
This design is based off of the Super Mario character, Princess Peach, I printed it with a .6mm nozzle, but you will get better details with a .4mm nozzle, I used White PLA, so Christmas lights would show through the design and make…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
gabarit d'angle pour laser, positionnable facilement grâce a des aimants.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
A simple stand for my Thomann clarinet in C . Simply print the two pieces, they slot into each other. You can store the stand disassembled in the pocet of the clarinet case. It is not the most stable stand (use it at your own risk), but…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
A holder designed for Hario V60 coffee filters. It holds up to 100 filters and allows for easy, single-filter extraction without disturbing others. Designed for reliable printing without supports or brims, this single-part model requires…
Print approx. €7.35–€8.99 excl. taxPreliminary estimate for one variant
Very stable spool holder on top of the frame of a MK3. It is a remix of the "Chat Bubble" design by saabotage900. It provides almost vibration free delivery of the filament to the extruder due to the perfect concentricity of the spools on…
Print approx. €5.27–€6.45 excl. taxPreliminary estimate for PETGSource material: PET
¡El compañero perfecto para tus aventuras de juegos! Torre de dados La Garita del Castillo San Felipe del Morro. ¡Con esta torre de dados puedes tirar tus dados como lo hicieron los españoles en el siglo XVI! La torre está diseñada con…
Print approx. €11.28–€13.79 excl. taxPreliminary estimate for one variant
Toyota Lexus Screw Cover for Yaris, Auris, Corolla, Rav4 and other models I recommend black material, printed in 100% infill and support only under the long pin.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This Octagon Plant Saucer is a testament to the beauty of geometric design, combining functionality with a classic terracotta aesthetic. Its flat rim and meticulously crafted corners underscore the elegance of its octagon shape. The…
Print approx. €10.02–€12.25 excl. taxPreliminary estimate for PETGSource material: PET
Very nice and detailed car wall art model of a ferrari sf-90 Stradale. Size can be adjusted as wanted.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
In designing this octagonal plant saucer, my aim was to create a functional yet aesthetically pleasing base for your plant pots. The saucer's octagonal shape, with softly rounded corners, offers a modern touch to traditional plant care.…
Print approx. €10.08–€12.32 excl. taxPreliminary estimate for PETGSource material: PET
Description There are a lot of different opinions about the use of Igus bearings in 3D printers. However, I have decided to use my Prusa MK3S/+ with the only logical combination of fixed and loose bearings and have had very good…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the octagonal flower pot, a perfect blend of functionality and style. This pot's distinctive eight-sided design, with smoothly rounded corners, forms its foundational shape. The top rim of the pot is elegantly rounded,…
Print approx. €23.09–€28.22 excl. taxPreliminary estimate for PETGSource material: PET
I remodeled the chassis of the Ferrari 575 GTC LM04 Evolution to fit the digital decoder (26732). Update 1: Improved model printability, removed Magnet tray between Motor and Decoder. requiered parts: Ferrari 575 GTC LM04 Carrera digital…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Material: Prusament PLA Vanilla White 1kg Layerheight : 0.20mm (SPEED) Support: Not necessary but use automatic paint for better result Support Style: Organic Infill: Lighting (For Filament Save) Perimeters: 3 (For Durable)
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
I designed this driftwood piece for my tree frog's tank. It has a natural, organic shape that adds awesome vertical structure to your pet's enclosure! I printed mine in two parts and orientated it vertically to minimize supports and…
Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant
Standing figure of Harihara carved from a single slab of buff-coloured sandstone. Date: 1000 (circa). Found in India, possibly from Khajurāho (north). Now located in The British Museum. Photos taken in November 2018 with a Sony a6000 and…
Print approx. €10.86–€13.28 excl. taxPreliminary estimate for one variant
Ferrari 499P Hypercar #50 (2022)
Print approx. €5.84–€7.14 excl. taxPreliminary estimate for one variant
Printed in PLA at 0,15mm Supports of various sizes on the central axis to accommodate the plant's wedge
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
PIRAT SHIP CARIBBEAN PIRATSKA LOD KARIBIK PIRAT
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Been making items for my aquarium. So i made a ship enjoy NOTE: I recommend downloading the Obj. file and slicing it on your own, to make sure it fits your printers settings. The gcode file i have provided is for my own printer which is…
Print approx. €17.55–€21.44 excl. taxPreliminary estimate for one variant
Zodiac constellation Aquarius keychain If you print it in one color, it looks good. If you print it in two colors and use a natural or translucent filament as a base, when you illuminate it or place it in front of a light source, it will…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
very nice wall art of one of 3 the cars that belong to the holy trinity. Size can be changed. I accept more suggestions
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Symbol of the Night Court. From A Court of Thorns and Roses book series by Sarah J. Maas.
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
1976 EXOTO TIPO 312T2 Fourth, 1976 Grand Prix of Italy, driven by Niki Lauda Nobody expected 1975 World Champion Niki Lauda to return to the cockpit after his tragic accident at the Nurburgring on August 1, 1976. In the days after the…
Print approx. €8.21–€10.04 excl. taxPreliminary estimate for PETGSource material: PET
Very nice and classic wall art of a Ferrari F40. size can be edited as prefered
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
🇩🇪 Deutsch ein simpler salitos/coronarita halter, um die flasche am glasrand zu befestigen gerne Kommentieren und liken 🇨🇳 中文（普通话） 一个简单的Salitos/Coronarita瓶托，用于将瓶子固定在杯沿上。 欢迎点赞和评论！ 🇪🇸 Español Un soporte sencillo para Salitos/Coronarita,…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
This is for use with the Nintendo Switch game called Mario Kart Live Home Circuit. This is sliced for an MK3S with an MMU. Print instructions This is designed for a MMU to print. If not using the GCODE, load the base first. Then click on…
Print approx. €12.65–€15.47 excl. taxPreliminary estimate for one variant
Maintaining healthy plants and getting effective rooting in a small aquarium can be difficult. You need a depth of substrate that is normally more than the depth of the gravel and it would be nice to be able to swap out damaged / eaten /…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
Hey just a multipart print of one of those Shroob guys from Mario & Luigi: Partners in Time (from 2005 lol). You don't need an MMU, so you can just print each color separately. I ended up using 5 colors: Purple, Light Blue, Black, White,…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Here is another colored model, I am sorry not providing real picture of the print, there is non yet. As soon as I print it out I will modify the pictures here. If you like it - support Szbalasz.
Print approx. €14.61–€17.86 excl. taxPreliminary estimate for one variant
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
elemento decorativo para el hogar
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
Wall Art silhouette model of the Posche 911 Safari. Adjustable size. I accept model suggestions or ideas you might have
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Wall Art Silhouette model of the Ferrari F-12 Berlinetta. Adjustable size. I accept model suggestions or ideas to make.
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
Starmie the spinner with stand. Using 608 ball bearing, if you dont have one try print 608D.STL Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
The plastic covers in the engine bay contain a dozen or so retainer clips that tend to fly out and get lost when the cover is removed. This part is a replacement for the retainer. Must be printed in the orientation modeled - if printed…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Modification for Tukkari TLX (Prusa Mini) enclosure, stops the rear extractor fan from touching any walls, giving space for the fan to work and not be obstructed. Print Settings Printer Brand: Prusa Printer: Mini Rafts: No Supports: No…
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
My saddle bag got in the way of a good place to mount my Garmin Varia RTL515 rear facing radar. This mount attaches to the seat mounts. My seat had 7mm bars and they were wide from edge to edge. This uses a single M4 nut and M4x20 bolt to…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Tomando como referencia la imagen del equipo de futbol Millonarios de Colombia lo dibujé para darle volumen y diseñar la base que recibe el celular. Por su diseño también sirve para Tablet. Se emprime en dos colores : Azul y Blanco que…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Solarigraphy camera with water drain. assembly wideo by my brother: You need photopapier 10cm/15cm.
Print approx. €17.50–€21.39 excl. taxPreliminary estimate for one variant
The flathead and PZ/PH holders are optimized for Wera srewdrivers, but will fit other brands. The large holder was printed with a 0,8mm nozzle, to get this out quicker. This was to big for writing this size markings. Unfortunately this…
Print approx. €4.62–€5.65 excl. taxPreliminary estimate for one variant
The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Dvoubarevný znak. Doporučuji žlutou a černou Popis ještě dodám…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Hey just another Shroob, but this one comes with a freakin laser! It's from Mario & Luigi: Partners in Time on the Nintendo DS. You'll need 6-7 colors depending on what you choose for the blaster: Purple Light Blue Black White Red Gold…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
