Counting matching models…
Doberman Dog Decor . Feel free to scale it as desired. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! With more and more questions popping up about the…
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
I am low on kitchen space and was tired of reaching in the back of the cabinet to find the right lid, so I designed an organizer for the main sizes I use. There are three sizes for the different containers: Tiny (0.5 cup) Small (1.3 cup)…
This is very much a work in progress and will change constantly. This is a pair of simple ear muffs that hang on the Quest 2 or 3 Elite Strap to keep the audio a little more private and let you use a lower volume. I ran out of TPU, so the…
A 1:48 Scale 33 Gallon Rubbermaid Brute Trash Can
Especially for washing the user Karro Diaz. Thank you for downloads, likes… Enjoy !
This is a mount clip/bracket thingy for a Rubbermaid closet wire shelf. The original that came with the kit had the built in nailed anchor for drywall that got damaged when I needed to relocate the shelving. This version works best with…
Specifically tailored to be low profile for Rubbermaid brilliance lids. It will work for the small lids too. 7 Slots for lids seems more practical to me and this requires significantly less vertical cabinet clearance to get lids in and…
The Cybermen have assimilated autumnal squash. Can The Doctor defeat them and save the Earth? There are two versions. One fits on 250mm beds, the other 180mm beds. The upper and lower head sections require a small amount of support (refer…
This will fit Rubbermaid 2.5 gallon gas can with a 4.25 mm thread pitch. This will NOT fit Midwest or Blitz cans with coarse or fine threads. Three models are included, one closed lid, one lid with a 31 mm spout hole, and a spacer that is…
A caricature of a Cyberman from Doctor Who Update: I have added a multicolor version for AMS, however this is untested as I don't have an AMS to test it out. If you do try printing this model let me know how it went.. Thank you.
Wall mounted Dog Dobermann decoration or Key chain holder I have made this dog Dobermann design with a hole on the back so you can display it on the wall. If you like this I have couple more other animal heads. You can find them in my…
Rubbermaid stopped selling the small metal brackets that can be used to attach pegboard and vertical rails. This is not a full replacement but I wanted something like this and I saw others asking but couldn't find anything. Printing…
Non printed parts consist of four 608 bearings (skateboard / fidget spinner / etc…) Use supports for rollers. I printed at 0.6mm line width on a 0.4mm nozzle on my Ender 3 pro.
could not find a natural doberman enywhere so I made a remix from an exelent labrador model Category: Pets
Experience the geometric beauty of our compact 3D-printable Hoberman Sphere, this model is ideal for educational use or just for fun. Icosahedron Design: 12 vertices, 20 triangular faces, and 30 edges. Each edge is replaced by four…
Doberman Sitting, Hexa Sculpture
This simple mount allows you to hang your drybox from the underside of a shelf or enclosure. Print instructions .2 mm layer height 3 or more perimeter walls This is a remix of this thing on Thingiverse by customyota . Mine has a tighter…
When the lid latch on my 30-year-old toolbox broke, I designed this replacement. Should be printed with the flat edge face on the bed. Supports are necessary in this orientation but affected surfaces aren't visible. Being a functional…
This is a direct replacement with an older Rubbermaid Shed Latch that I happened to snap off accidentally. It's designed to snap fit securely into the shed door like the original. Print Settings Printer Brand: Wanhao Printer: Wanhao…
Support under the chin is necessary
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Replacement Rubbermaid / Gott gas can "nut" screw cap for a 1.5 gallon "Gott" (Rubbermaid) plastic gas can. Non-standard / custom threads made this a fun* challenge. Perseverance and a couple more Youtube lessons in how to use Fusion 360…
Desiccant boxes contoured to fit the bottom of Rubbermaid 21 cup storage containers. This was designed for the translucent containers containers work. However, I was able to confirm it also fits Zylar containers if you can still find…
Instead of a pegboard I got some Rubbermaid FastTrack wall panels for my garage. (…
Verleihe deinem Fahrzeug einen markanten Look mit diesem Hitch Cover im Stil eines Dobermanns! Dieses praktische und dekorative Zubehörteil schützt die Anhängerkupplung deines Fahrzeugs vor Schmutz und Witterung – mit Stil. Das Modell…
Updated April 24, 2026 What's new More durability with thicker walls (2 walls) Completely redesigned geometry for cleaner file Updated lid now matches the shape of the container Printing Tips 3 Walls Save filament: 0 Top/bottom layers 0…
Filament DRY box Rubbermaid 21 cup self centering rollers. v1.0 2023-12-31 Initial Remix Release Lid PC4M10 Adapter can be found in https://www.printables.com/model/421169-in-container-brackets-for-individual-spool-dry-box
Features Realistic Details – Carefully sculpted to highlight the Doberman 's signature facial features and fur flow. Designed for FDM Printing – Prints cleanly with supports under the chin and ears; ideal for resin or high-resolution…
Cybermen from Doctor Who Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Dog – Doberman reimagines the breed’s sleek and…
I lost the files for my original Bomberman figure so I thought "might as well do it all again" If possible try to print with clear resin for the support pole in the future. May try and make another version with the support pole in a less…
Low PolyDogy Keychain Doberman Key Ring
Geometric dog wall art - “Dobermann style”: Default size is around 135cmx120cm ! 73 pcs (all parts can be print at full size on a standard printer bed) All parts are numbered on the back and here you can find the numbers assignment :…
Bracket to attach to Rubbermaid Twin Track rails. Holds 3mm hex nuts and allows for M3 screw. Print upside-down, no supports needed. This can also be merged with other models to allow them to be attached to Twin Track rails.
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
This is a partly print-in-place version of a Hoberman Sphere. It consists of 12 articulated link mechanisms (black) and 12 connectors (red) that are held together with pieces of filament. Printing The mechanical links need good bed…
*** Update: 9-10-2020 Some of my thin spools I had from Proto Pasta, and Spider Maker were offset from center and caused a few issues. So I made a quick spacer that can slide onto the axle and move thinner spools closer to the center of…
The Dobermann [a] is a German breed of medium-large working dog of pinscher type. It was originally bred in Thuringia in about 1890 by Louis Dobermann , a tax collector . [2] It has a long muzzle and – ideally – an even and graceful gait…
The Cybermaiden is a half face mask that mixes a softly sculpted human face with cyberpunk armor plating. The nose, lips and chin are smooth and lifelike, while the cheeks and jaw carry panel lines, vents, a honeycomb detail and a…
This is a remix of chrisvanpatten's lid holder model, redesigned and remade in OnShape to provide a tighter fit for Rubbermaid Brilliance Food Storage Container lids and allow for more flexible configurations. I've created 10 different…
Simple and quick shoe holder for the Rubbermaid FastTrack® Rail Garage Organization System. Printer: Prusa MK3s Slicer: PrusaSlicer Layer height: 0.3 mm Material: Overture PTEG
Wall mounted cyber Dobermann dog decoration or Key chain holder I have made this Cyber Dobermann dog design so you can hang it on the wall with screws. If you like this I have other animal heads. And thank you for the support beforehand.…
Instead of a pegboard I got some Rubbermaid FastTrack wall panels for my garage.…
Rubbermaid Brilliance lid rack organizer for your kitchen cabinets. *Use of the buffer piece perfectly spaces the rack to prevent the first lid from touching the wall of your cabinet. *The spacing between lids ensures they don't touch…
Dog Dobermann stand animal miniature head sculpture Table top or shelf display decoration for your home. Simple and elegant design. If you like this work I have other animal stands. You can find them in my bio. Thank you for support…
looking to store ego batteries easily? use Rubbermaid Fasttrack and this print! prints best vertically, support needed. 30% infill with 4 walls seems great in PLA
Cybermen from Dr. Who This Cybermen keycap is compatible with Cherry Mx key switches. I printed mine at a 1.2mm layer height without any print supports. If you'd like to do a colour change at a layer height; you can start the Cyberman's…
A slide-in bracket that can support wooden shelves inside a Rubbermaid Tuf-Shed. Available in 2 sizes, designed to be used with 2x #8 Flat Head Screws for each bracket. Small is 100mm (~4 in) Large is 150mm (~6 in) Recommend printing out…
Bring a touch of modern sophistication to your space with this stylized 3D model of a sitting Doberman. Crafted in a sleek low-poly design, this piece captures the noble essence of the breed through clean, geometric lines. The angular…
This is designed to fit the Rubbermaid Takealongs Dry Food Container 21C. To save some print time it's also designed to use 3/4in PEX pipe for the roller. Cut the pipe to about 69mm and fit the end caps in. Uses 608ZZ Bearings.
Bomberman / Dyna Blaster - a game character from old PC game Thank you for downloads, likes…. Enjoy !
This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…
These are a variety of hooks and holders that I made to support various tools and books on my rubbermaid fastrack wall. The parts were designed at onshape.com. You can duplicate and edit them, or just view the originals here:…
I can't mark it as a remix of a model from Thingiverse but this is a remix. A combination of https://www.thingiverse.com/thing:3717561 by naresh80 and https://www.thingiverse.com/thing:4623915 by lastand. I wanted a good way to hang my…
I created a filament mounting base to fit inside a “Rubbermaid 21 cups Clear Food Storage Container” dry box. The design allows for desiccant to be poured in the container and be easily monitored, removed, and/or replaced. The mounting…
WARNING - CHOKING HAZARD! SMALL PARTS! KEEP AWAY FROM SMALL CHILDREN! INTRODUCTION This is a very satisfying sphere using the Hoberman mechanism. It is a truncated icosahedron, with 12 pentagons (5 sides) and 20 hexagons (6 sides) that…
Replacement Plastic Hinges for the ice chest, coolers, etc. It is still prone to cracking but it cost less than 12 grams of filament each. I printed it in PETG 15% infill. I made a small slit on the back side to make it fold easily.
This is secure and strong mount for Closetmaid ShelfTrack and Rubbermaid FastTrack vertical rails, which attaches into three levels like the Rubbermaid FastTrack shelves. To install, angle the top in first, then bring the mount's inner…
🐾 What is a Doberman Pinscher? Breed name: Doberman Pinscher ( Canis familiaris ) Origin: Germany — developed in the late 19th century by Karl Friedrich Louis Dobermann, a tax collector who wanted a loyal and protective companion. Group:…
Holds lids for the small and medium Rubbermaid tupperware. Printed both on the Prusa Mini. The Medium will need to be cut at the very top.
The Rubbermaid 21 cup container makes a convenient dry box for humidity-sensitive filaments. My design needs a single hole in the container for the bowden tube passthrough, and uses rubber washers to preserve the airtight seal. There is…
I am not sure if this is for the Rubbermaid or Closetmaid versions, but it looks just like this one: https://www.lowes.com/pd/Rubbermaid-FreeSlide-Corner-x-12-in-White-Universal-Wire-Shelf/50336061 Check the measurements of your shelves…
This simple mount allows you to hang your drybox from the side of a wall, shelf or enclosure. Very useful for an Ikea LACK Enclosure . That can only fit 4 of these mounts inside . Print instructions .2 mm layer height 3 or more perimeter…
A longer hook good for larger light items
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Devil Design - PLA Black Devil Design - PLA Gray Devil Design - PLA Light Gray Devil Design - PLA White Printing instructions: Until layer 5…
I have two of these gas cans that came with my house. Somehow one of our caps got lost, so I scaled up the other one for this model. This cap is a direct replacement for the stock one and maintains all the same functionality. However this…
This is a free-standing auto-rewinder stand designed for use with the Prusa MMU2S multi-material unit. I designed this rewinder stand to meet the following criteria: Must accommodate a spool 90mm wide by 200mm diameter, which is the size…
For those of you who use the Rubbermaid 21-cup cereal containers to hold your filament spools, this flat box can be used at the bottom of the container. Simply fill it with silica beads and fit the lid on it. The container and lid have…
Doberman Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
This is ancillary to the latch posted by Daveofthings (https://www.printables.com/en/model/247941-latch-for-rubbermaid-toolbox/comments. It fits between the toolbox and the latch. Following his lead, I made the holes slightly undersized…
A bracket to mount a Rubbermaid foldable stepladder onto the wall. The inner width of the bracket is 30cm, and the two screw holes are inset and work with standard #6 drywall screws. The top screw hole is angled downward for extra…
This is an auto-rewinder stand designed for use with the Prusa MMU2S multi-material unit. I designed this rewinder stand to meet the following criteria: Must accommodate a spool 90mm wide by 200mm diameter, which is the size of a spool of…
This is a Spool Holder/Roller that fits a Rubbermaid Filament Dry Box This model is inspired by the XL Filament Spool Holder
3D-Printed Organizer for Rubbermaid Square Take-Along Lids Streamline your kitchen organization with this 3D-printed design for Rubbermaid Square Take-Along lids from Dollarama! This simple yet effective organizer keeps your lids neatly…
Needed a replacement handle for my garbage can handle as it snapped in half recently. This replacement has been in use for a few weeks now and seems to hold a heavy load without issue. Really love when 3D printing can rescue things from…
Made this to go on my wall of Who. Category: Other
Low poly 3D model of a Doberman. Optimized for games, animations, AR/VR, and 3D printing. A strong and stylized asset, perfect for pet projects, collectibles, or renders.
Dr. Who - The Wheel in Space - Cyberman - 1968 3D printable model.
You really only need 2 of them per can. To lock in place insert sideways and rotate 90 degrees.
Doberman silhouette for wall art decoration. 0.2 Fill 100% Ensure your bed is properly clean.
I needed some covers for my wire shelving, and I thought it was too wasteful to buy a bag of covers from Home Depot when I only needed a handful. I have included the Fusion 360 files if you need to resize them for your shelving. The round…
Dr. Who - The Tomb of the Cybermen - 1967 3D printable model.
4mm OD Teflon tube pass-through designed for Rubbermaid lids. May split stiffer material. Use 5/16" drill. No supports needed. I used PETG and it works well but PLA should also work. STEP file included Print instructions Print with Large…
if you want to print in multimaterial pick: no eyes and mmu parts, if you want to insert pieces pick no eyes+insert parts
A Doberman Pinscher figurine with a sleek profile and neutral standing pose. Optimized for single-color FDM printing as a solid, durable one-piece model. Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Cyberman fig at 500%…
🌌 ¡La combinación perfecta de fuerza y elegancia en estilo Funko! Captura la silueta atlética y mirada alerta del Doberman en un diseño minimalista que honra a este noble guardián. 💡 ¡Presencia imponente en cualquier espacio! 🏠 Figura…
This is the Auto-Rewind Spool Holder ( https://www.thingiverse.com/thing:3252111 ) version 1.07 with settings adjusted to fit within the Rubbermaid Spool Stand ( https://www.thingiverse.com/thing:3245554 ). The holder has been tuned to be…
The handle on my Rubbermaid Animal Stopper bin broke, so I have made a replacement. I have included the Fusion file in case you want to tweak the design. I added a screenshot from cura to show how I oriented the part. Sorry about Cura,…
Accessories for the Rubbermaid Fasttrack Rails. The Base is universal, and will bolt onto each other piece using 4: ¼"-20 x ½" Bolts & 4: ¼"-20 Hex Nuts. For Paper Towel Holder, Print: 2: Base 2: Paper Towel Base 2: Paper Towel Pin 2:…
This is a basic 3 ring collapsing and expanding Hoberman Sphere, based on my original model. I added bushings and longer pins for better actuation. See the original model for assembly instructions:…
A slide-in bracket that can support shelves of a Rubbermaid shed. No supports required, 3 perimeters, 50% infill, but can be less.
the walls are 0.08 inches thick. keeps the cabinets org'd
