Counting matching models…
Color airplane kit. folding is very simple. enjoy printing and share photos of your prints! The Waco YKS-6 aircraft was one of the iconic airplanes of the golden age of aviation in the 1930s. This biplane was known for its robustness and…
A String Biplane model with spinning propellor and wheels. Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne. All parts are printed without supports I found a brim…
The model prints in PLA at 100% infill in 45 minutes. There are two parts, the plane and wing. Remove both from the bed, being careful not the bend anything. The main structures of both wings will be facing towards the back wings at a 2.5…
Print the feet in as soft TPU as you can, I printed mine with 60A TPU from Recreus, the softer the better the grip. The M3 screws will thread itself. BOM M5x20 2pcs - For legs M5 Locking nut 2pcs - For legs M5x40 1pcs - For picatinny M5…
How about using the popular micro:bit to make a Otto robot? this is how this robot came to life combining to great platforms and adding more articulations to create a new member of the Otto family. This a remix of the original Otto robot…
-remixed model - stronger and more massive body, resized bolt and nuts holes, remixed foots //3.1.2023 now printing model for test //4.1.2023 tested result OK, added photos. -Hardware needed: M6x20 2pcs - For legs M6 Locking nut 2pcs -…
CarabiPeg for easy connection to a backpack or other equipment - allows easy attachment of clothing or other equipment to the backpack - for example for drying. Print-In-Place | Compact Design | Easy and Fast Print It has probably…
A nerf bipod attachment that I made a few years back, not my best work but it serves its purpose
This is a printable bipod suitable for light duty, such as an air gun or 22LR. I based the design loosely on the Magpul bipods but there are some notable differences. I have prioritized compactness, as this bipod is intended to be used on…
Who is Tito? Walker and dancer DIY biped robot, derivative design from Zowi which is based on BOB the original biped robot that uses only 4 servos to walk and move. Made the following improvements: Able to have an Arduino UNO board (or…
English bellow. Hice esto para sutitur la sujecion del aparato Via-T de Bip&Drive en caso de ser necesario. La pieza deberia estar orientada tal cual la he dejado en el STL, con soportes y recomiendo colocar un Raft. No recomiendo usar…
This is my take on the popular Copepod hideout that hopefully aims to increase printability while maintaining a safe and accessible sanctuary for Copepods when placed in a reef tank. This is version one, and I recommend increasing…
Its a bipod. only hardware needed is a m4*25 nut and bolt the legs also fold. yay
Compatibility Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents. Print Print one with vertical symetry to get the 2nd side. Use ASA or ABS for hot days… For phase 4 only, you will need to apply a scale multiplayer because the oem…
The stock Elecraft AX1 and AX2 clip for the bipod is very stiff, difficult to attach, and hard to remove. At the request of a fellow op, I designed a better one. Here it is. Print in PETG for flexibility and durability. Print the clip…
The idea was to have a set of legs and feet that were easier to assemble and have lower center of gravity for certain balance movements like lifting one foot while standing on the other. To complete the robot you will need to download and…
I liked this model very much (this is not my design !!!) thank you for that. But it was not FDM printable, so i changed the prop a little and de wheels a little and cut in two have and ..........now its printable (in PLA) I still like…
Parts List: m6 nuts - 4 m6x30 bolt - 2 m6x40 bolt - 2 Print Instructions: Add a pause in the g-code at the top of the nut cavity in the base.stl so that you can insert two m6 nuts and continue the print, encasing the nuts into the part.…
Mon support d'origine est resté collé sur mon ancienne voiture… Du coup, j'en ai modélisé un nouveau… Impression en deux morceaux, une petite goutte de colle entre les deux, et un morceau de double face, et le tour est joué !
Just a model I made, see my other planes too How to assemble This model requires glue to assemble. Refer to the images if you are having trouble with assembly. Use pliers, a knife, or wire cutters to remove parts from their supports.…
I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…
I designed this foldable, springloaded Sub- Picatinny Bipod for nerfing. Sleek, slim design with the curved long slot serving as end stops. Hardware used: M2 or M2,5 for the end stop bolts M3 to secure the Joint and the foot to the leg…
Flip 180 degrees for ease of printing. Required 3 heat set inserts and 3 M3x20 screws. Secure with 3m double sided tape to prevent from rotating
A cute little toy biplane, roughly based on the German Albatros D.Va from WWI, but "chubbified" and simplified. I used the Albatros D.Va by sonycrow as a starting point for the plane's geometry. The plane prints in one go, standing on its…
Schichthöhe 0,1 Schichtbreite 0,3
A fairly simple bipod that uses some elastic cord to have bistable legs (The legs have two resting places) you will need some 4mm or 5/32" elastic cord I also made some actual instructions!
Bipod, tht can be attached to bottom of the magazine.
These are bipod legs that work with the AX1 clamp that was created be K6ARK. you can find the clamp here on pintables. https://www.printables.com/model/626212-elecraft-ax1-ax2-antenna-bipod-clip-knob
The holder for my BIP&GO has been lost so I made a new one Use PETG with organic supports to print I used an 0.6mm nozzle with 0.3mm
Bipod for air rifle. Made for my son who can't hold a rifle by himself yet. Layer height: 0.10 mm
A little holder for the watch :) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament: Slim3D PLA Dark Green Category: Other
Stands on it's own - requires a lot of tree supports but it's possible to print. Turret does not move. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Use two M3x10 Caphead screws and two nyloc nuts I had problems printing this with Arachne enabled and my 0.4 nozzle, the perimeters didn't fuse, so I had to use classic perimeter generator.
This is a remix of the bi-pod ( https://www.thingiverse.com/thing:1478754 ) as designed by Martialmedia but now for a 16 mm barrel. I also increased the thickness of the "pivot points" to make it a bit more sturdy You will need a M4 bolt…
Print on it's side, with supports, to ensure maximum durability of the loop.
This 45RPM adapter is a fun variation on a simple yet indispensable accessory that many vinyl collectors are familiar with. As the record spins, the biplanes orbit each other in a playful dance, swooping up and down in perfect synchrony.…
This is a pilot seat I designed for the Legacy Aviation (Extreme Flight) Muscle Bipe 54''. It fits the pilot bust that comes with the plane, though I designed it for a custom pilot figure I made. Weight is approx. 8 grams. I recommend…
-= Русский =- Сошки для пневматической винтовки. Все отверстия сделаны для винтов М3 и гаек М3. -= English =- Air rifle bipod. All holes are made for M3 screws and M3 nuts. Category: Sport & Outdoors
A bipod adapter to use any generic bipod on your airsoft M249. Tested on CA, should fit A&K. Maybe G&P. Does NOT fit Specna (thanks Fandaboi)
Umarex NOTOS picatinny rail , full length with block screw tab to fix it to the rifle. A more refined version of my first one. Now uses the block screw to attach . Slips over air cylinder on the Umarex NOTOS air rifle adding a pic rail to…
The developer, “Blinsky's Toys” continues to spread joy throughout the world by bringing you a brand new toy. The “War Caster” is an adjustable bipod designed to attach to a picatinny rail and fold out of the way for storage. That means…
I designed this mobile for my son when he was born, and it was hanging in his room until we moved about 5 years ago. The planes are assembled using the printed pins, and you will need 5 pins for each plane. The propeller and wheels should…
Всем привет. Нарисовал два вида крепления Пикатинни на глушитель пистолета Hatsan Mod 25 Supercharger https://www.e-katalog.ru/HATSAN-MOD-25-SUPERCHARGER.htm На данную планку можно установить сошки которые можно сложить или разложить при…
Fixed Bipod for Hatsan Flash QE PCP Air Rifle. No extra tools or hardware required to install. This design is not meant to fold up, but comes off the rifle easily enough. Bipod slides on to the front Picatinny rail and is held in place by…
FX Dreamline Bipod Mount with Picatinny Holder / This adapter does not require screws.
This is a simple yet effective bipod for my arisoft sniper ASG Zastava Varmint M70. I made this using Solidworks 2016 and it works very good until now. It could be used on any sniper rifle like VSR10,Varmint M70 etc or with any sniper…
The little strap loop that comes with the Amazfit Bip keeps slipping off and it is annoying. So I designed this one that will poke into one of the notches to stay in place. Print instructions Print Settings Print using TPU or Ninjaflex.…
Bipod can be used to hold counterpoise wire for Buddistick or buddipole. fits into buddistick pro carrying case. can also be used to hold wire antenna ends off the ground. using 3/8" x 4ft fiberglass rod post (I purchased mine at tractor…
Don't trust - verify! A possible attack vector on common signing devices (hardware wallets) is a supply chain attack, such that the mnemonic phrases given to you are not really random and possibly even already known to an attacker. Once…
The Polikarpov I-153 Chaika (Russian Чайка , "Seagull") is a late 1930s Soviet sesquiplane (Biplane) fighter. Developed from the I-15 with a retractable undercarriage , the I-153 fought in the Soviet-Japanese combats in Mongolia and was…
Logitech Streamcam bipod Use the original streamcam laptop mount as a desktop bipod ^^ Pass the mount through the shirt and slide the legs. Cam can tilt and pan, as if it was a neck. No screws, no magnet, slide in place.
Here's a remix of Ottodiy bot v13, called Otto 9V, I have used this Otto robot for teaching in my after school STEM/STEAM classes. This Otto 9V has been modified with a slide on Lego top or hat on top of Otto head. The body has a slot for…
Stearman biplane circa late 1930s. Print wings vertical. Use rubber bands when gluing wings to struts.
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
After trying a bunch of smartwatches I decided to go back to Amazfit Bip. It is an amazing timepiece no other could compete in terms of battery life. The only reason I was trying the other watches is that I never was quiet happy with…
Print in 0.16mm layer, 5mm brim no support except for: The slider - print on side with the hole rising through the model and support the angled tip. The stock support - lay on side, support to the overhanging section that is not sat on…
Sopwith Camel capable of being piloted by a Lego Minifig. Triplane can be found here: https://www.printables.com/model/367590-easy-print-tri-plane-for-minifig-lego-pilots Parts are oriented correctly for printing on a textured bed.…
The internal plastic spring breaks on the Phillips DreamStation BiPAP which causes the door latch for the water chamber to not stay latched. A few screws allows access to the old spring that can be completely removed and replaced with…
Everything can be printed, except: two M4 screws and nuts the two rubbers for stabilization plastic adhesive You'll need one "befestigung", one "stabrechts" and one "stablinks". Furthermore you'll need two objects of "stabverbingung", two…
Endless Design Lab’s Level Six Sierpiński Triangular Bipyramid Fractal adds yet another level of intricate detail with six levels of recursion. The design is fully optimized for vase mode printing, ensuring a smooth, efficient process…
check origional for guide, but its fairly straightforward.
Всем привет. Нарисовал два вида крепления Пикатинни на глушитель пистолета Hatsan Mod 25 Supercharger https://www.e-katalog.ru/HATSAN-MOD-25-SUPERCHARGER.htm На данную планку можно установить сошки которые можно сложить или разложить при…
Endless Design Lab’s Level Five Sierpiński Triangular Bipyramid Fractal adds another layer of detail with five levels of recursion. The design is optimized for vase mode printing, allowing it to print seamlessly, efficiently, and with…
Slightly better than the original version I made a while back, can be used right after being taken off the bed. Basic model has 100mm legs while the longer version has 150mm legs. Might make a stronger version that can use pipe or dowel…
Mount for bipods. The normal version fits on normal picatinny rails and the short one is especially for:…
I just installed an Arca Rail on my NRL22 rifle. My Bipod used a Sling stud mount and I when putting an arca quick release on there was a bit of a gap that I figured would possibly cause the mount to shift if it loosened up at all. So I…
I wanted to be able to attach/remove my Magpul Picatinny Bipod quickly and without tools, so i came up with this thumb screw and had it turned by a local company. Please note: this is not meant to be 3D-Printed. In a pinch, printed screws…
It was inspired a long time ago by the BOB Biped robot and have made a few since. I wanted to give something back to the new makers out there, like I had the chance to get Bob so long ago now. I didn't want to go overboard, so the…
Harris Tilting Bipod tilt lock lever for the new style large diameter ribbed knob. Hardware: 1x M4x20 button head cap screw 1x M4 nylock Please see my other designs for a lever for the old style small knob.
Heavily modified version of the A&K Adapter since that one wouldnt fit on the G&P model in multiple dimensions. Field tested and extremely sturdy when printed (at least almost) solid.
Upkie is a fully open source self-balancing wheeled biped robot. It has wheels for balancing, and legs to go off-road or negotiate uneven terrains. Upkies are designed to be buildable at home with tools and components ordered online, like…
My co-worker was about to buy one of these for $40+. I casually mentioned that we could probably make one with a little bit of luck. Lo and behold, here's the product. A Picatinny (Pica Tinny?) mount with a camera tripod mount threading…
Yellow Biplane Over the Mountains Category: Vehicles
This is a novel design for a printable joystick bipod that utilizes compliant mechanisms (flextures) for movement control. Design The mechanical design of the flexture allows for fine grain control of vertical and horizontal movement via…
Created a Phone Stand for watching Movies on the Train etc. Just put the top of your phone in it and adjust the angle to your needs. There is a hole in one side to add the MobiPhoneStand to a keychain. You can get those carabiner hook for…
Someone (I don't want to name names but it could be me) habitually overfills the reservoir and gets leakage onto the dresser beneath. I made this as a waterproof barrier to protect my dresser. I printed out of TPU to minimize how much it…
Adjustable bipod powered by bungee cords intended to be put onto Nerf blasters. The legs are adjustable by a clip which interacts with some rungs on the rotating legs, this part is fully functional. There are two orientations you can…
An adaptation of Otto DIY biped robot with the ironic shape of a spool filament for 3D printers. Bill of Materials (BOM) Ultrasound sensorHC-SR04 LED Matrix 8x8MAX7219 Sound sensor Buzzer Switch x2 Servo SG90S x4 Logic Level Converter…
This grip for the Umarex Notos airgun has dual functionality for precision shooting with its 5 position adjustable bipod and vertical angled foregrip. The optional foregrip provides improved ergonomics and control for off hand shooting.…
Atlas Bipod Tension Wrench - You ever lost one of these at $40 a pop? I have, print one and lose pennies instead.
It’s a charging stand for the amazfit BIP-3 smartwatch
An open source and 3D printable bipedal robot that can walk, balance, and has the potential to navigate its surroundings. I'd recommend printing all parts at 20-35% infill, except for the lock and small reduction gear. Print those at…
The Amazfit Bip 6 uses a small magnetic USB-C charging adapter that clips onto the back of the watch. Unfortunately the magnet is fairly weak, so the charger can easily shift if the watch moves or if the cable pulls slightly on the…
Soviet plane-fighter I-16. Chibi plane Print Settings Printer Brand: TEVO Printer: Black Widow Resolution: 0.1 Filament: ABS ABS Category: Vehicles
This is a shortened version of Tony's bipod on MakerWorld. The reason I shortened it is so that it is possible to use it in a prone position without shooting the treetops :P The original model can be found here: Rifle Bipod 200mm with…
I designed this level 4 self-similar triangular bipyramid fractal in CAD to be printed in vase mode. The model can be printed once as a single pyramid, or in two halves and assembled into a complete structure. I've included a 3MF for a…
Bring a touch of classic aviation to your garden or rooftop with this dynamic biplane weather vane. Fully 3D printed, as shown in the image sequence, this model is designed to rotate smoothly to indicate the direction of the wind. The…
Swiveling feet for magpul bipods. Files are in STEP. so you can modify the attachment point and feet to your needs. Printed in Petg with 30% infill. With supports. Havent tested the durability yet. BOM 2x M3x20 socket head screw 2x M3…
My watch's band retainer got loose after a while and kept moving around. This design locks on the band's holes with the protruding piece, so no more random moving. 16/03/2026: Added a 2nd version, taller, and with modified "pin". The goal…
A highly detailed humanoid mech with intricate mechanical parts, perfect for sci-fi displays or tabletop gaming
Airgun tripod because guys can't hold a gun. M6 threaded rods from the store. Estimate and cut with a saw as needed. Self-adhesive foam rubber holds the tripod on the rifle. Possible modification for a bipod. NOW it's a sniper gun for…
Bipod for a rifle Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Resolution: 100% Infill: 20% Filament: PLA PLA BLACK Category: 3D Printing
Please give it a ❤ if you like it 🥰 I can be resized in your slicer based on your buzzer diameter. This model is made for a 9,2 mm diameter. I added a version for buzzers with a 11,9 mm diameter. I also added a parametric version of the…
A clean and simple geometric model, the Triangular Bipyramid is formed by mirroring two equilateral tetrahedra at their bases. This design is perfect for educators, geometry enthusiasts, or anyone looking for an elegant display piece. Its…
Maybe you've got a tonne of cash and absolutely splurged when you purchased your Accu-Tac bipod. It's awfully tempting since they're an absolutely awesome piece of gear. … but maybe you really were stretching your budget and removed a…
Actuated joint for camera arm https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m using a Bipolar Stepper motor and cycloidal gear from https://www.thingiverse.com/thing:2669441
I needed to make a bipod mount for my Umarex Hammerli Hunter Force 900 Combo airgun. I downloaded the bipod from here: https://www.printables.com/pl/model/357606-bipod-for-picatiny-retractable/comments I made three variations of the…
