Counting matching models…
The Bitaxe Minimalist Stand The Bitaxe Minimalist Stand is specifically designed for the release of the Bitaxe Supra, catering to users running the Ice Cooler Tower setup. This minimalist yet sturdy stand ensures stability, even with the…
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
This is a highly detailed and accurate model of the Bitaxe 601 Gamma manufactured by Opensourceminer. The stl can be used as a dummy, but there's also a .step file included with a fully populated pcb, heatsink, Noctua fan and even screws.…
A stand which fits most, if not all the different versions of the bitaxe which are floating around. It shouldn't matter if they come with a usb-c or micro-usb port, the slot is dimensioned so they are accessible for flashing.…
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Mounting bracket for 52PI low-profile plus on the Bitaxe suited for pcb models 40x and 60x Print with filament that has a high heat tolerance, personally i print with PC. Print with brim to prevent warping and/or print in enclosure. Print…
I have a BitAxe Gamma running and the downside is that these can get quite hot with the stock cooler and fan. I got numbers running up to 65-70 degrees celsius without overclocking it. I was limited to 595MHz by 1.15 volt. After the…
Bitaxe Standing Case v2-04 The Bitaxe Stand v2-04 is an advanced design by D-Central Technologies, specifically updated to accommodate the latest modifications in the Bitaxe hardware (v204+). In this version, the DC jack has been…
Modified stand to add a second fan to the rear of a NerdQaxe++
This was idea was brought to us from a community member and we loved it we're making it happen. Tons of things I want to add. - PSU underneath powering everything. - piston fans - valve covers - intake manifold - probably more
Very stable Bitaxe stand with bottom pannel for the Noctua NF-A4x20 5V PWM. Print the stand upside down, no supports needed. To add: 4 Pan head screw M2.5*6 self tapping 4 felt pads 1.5x0.5 cm self sticking.
The Bitaxe Infinity Stand, which we created for SoloSatoshi is a nice, stable and open stand fitting any Bitaxe version. A slotting system enables you to slot the bases of the stand together to arrange multiple Bitaxes next to each other.…
BitAxe Gamma 601 Enhanced Stand This is an upgraded stand designed for the BitAxe Gamma 601 miner. It improves stability and cooling compared to the original stand design. Key features: Larger, more stable base to prevent tip-overs. There…
Simple stand for the Bitaxe Bitcoin lottery/solo miner. It consists of 2 Pieces (left and right foot) and the miner is leaned over backwards 30°. The 4 holes are made for heat-set inserts. I used Ruthex M3x5.7. For assembly 4 M3x6mm…
Stand for Bitaxe 601 Gamma and other versions supports 50/60mm Fan at backside 16-17mm clearance from Fan to PCB generous cavities for nice airflow keeps your bitaxe cool, quite and powerful have fun . Bitaxe Ständer für Bitaxe 601 Gamma…
Bitaxe Standing Case v2 The Bitaxe Stand v2 is an innovative design by D-Central Technologies, specifically created to enhance the functionality and aesthetics of your Bitcoin mining setup. This tailor-made stand accommodates the new…
Quadriga – Modular Cooling Tower for Bitaxe Devices Quadriga is a compact, vertically oriented cooling tower designed to efficiently cool up to four Bitaxe devices mounted on its sides. The system is optimized for continuous operation and…
Enclosure for your BitAxe Ultra with the finesse of the classic S9 ASIC miner. This case uses 2 80mm fans placed like the ASIC enclosures use in a push pull config. I have no more need to add a fan on top of the heatsink itself, making…
This is currently in beta and changes will be made. If you modify or remix please share the files so I can add them here! Would use with Noctua 120mm Fan https://amzn.to/3X9QLkA Also, there is a middle extension piece if you want to make…
Hi there! I was looking for a setup for my Bitaxe Gamma to be able to cool the device better. However I was not able to find anything suitable so I made my first own design. Advantage of this model is that it can be easily modified per…
A bitaxe backplate for mounting any bitaxe to a DIN-Rail. Requires 4 M3 screws which will thread right into the plastic. Print as oriented, no supports required.
! Use at your own Risk ! I designed this chassis for my Bitaxe Gamma 602 to help cool the voltage regulator using a second Noctua fan. It should also fit the 601, but I havent tested it yet. Fan used: NF-A6x25 5V PWM.…
This case is for the Bitaxe Ultra 1366 Bitcoin solo/lottery miner. There are two different versions of the bottom part - one with and the other without mounting holes. All parts can be printed without support. The design requires the use…
A stand which fits most, if not all the different versions of the bitaxe which are floating around. It shouldn't matter if they come with a usb-c or micro-usb port, the slot is dimensioned so they are accessible for flashing.…
Wall Mount for Bitaxe I prefer to mount it to the wall to not use up valuable shelf space. I felt like the standing mount was wasting shelf space I needed for other stuff.
Initially, I used two 80mm fans, but the noise was really annoying me. Later, I switched to two 120mm fans and now the noise is much more acceptable. With 80mm fan you need a high RPM to maintain a good airflow. Replacing with 120mm fan,…
no supports needed 0.20mm layer height (0.16mm for even smoother surface) 3 wall lines
Mounting bracket for 52PI ICE Tower on the Bitaxe suited for pcb models 40x and 60x Print with filament that has a high heat tolerance, personally i print with PC. Print with brim to prevent warping and/or print in enclosure. Print upside…
This is the updated version of the 90 to 120 mm fans duct adaptor. A number of people asked if I could make a version of the duct with side vent to cool the voltage regulators. on the Bitaxe NerdOCTaxe bitcoin miner. The miner can be…
Fan cover and shroud for 52PI Low Profile Plus for Bitaxe. Print with PLA
Enhanced version with threaded inserts (M3x5.7 mm). Use the washers for the back side to protect the PCB. The threaded inserts are melt down from the other side, so that the metal will not touch the PCB. The screws will still screw in,…
A simple adapter to mount an IceTower cooler to a bitaxe. Print as oriented 12 walls minimum Feel free to use this adapter commercially, as long as you don't sell the files.
I created this Bitaxe extension to avoid warm air recycling, Thus pulling in fresher air and not the warm air which just left the Bitaxe.. I hope that my work can be useful for you! Gtreetzz PS: You need to be a bit careful when screwing…
The Bitaxe NerdOCTaxe bitcoin miner can be significantly over clocked however the 90mm are not up to the task of moving enough air to keep things cool. Additionally 90mm fans are way too loud, unless you want a sever room vibe in your…
Very minimalistic enclosure and stand for BitAxe Gamma 601. Well ventilated and good for overclocking. M3 heat inserts are used for the fan casing that is attached to the enclosure. M2 heat inserts are used for the enclosure to fixate the…
A two part Adapter for mounting a 40mm copper cooler to a Bitaxe. Requires 8pcs M3 computer screws of variable lenght. You might have to use the included shim to ensure good contact with the ASIC, as those copper coolers aren't all equal…
It looks great when it works, but it often doesn't. Print and use at your own risk! The concept of this enclosure was to guide the air, which worked fairly well, but the back still needed to be opened up for the Bitaxe Gamma to not get…
Modular mounting array for your bitaxe gamma (601 and 602) and/or NerdQaxe++. Hardware required, You will need: 12.7mm (1/2 inch) diameter dowel M3 threaded inserts 6mm M3 button head screws (that thread into your inserts) The holes that…
I downloaded the Universal Bitaxe Stand model that you can find at the following link: https://www.printables.com/es/model/747080-universal-bitaxe-stand I made some small modifications that I think could improve the cooling of the module.…
just try my new bitaxe stand its a simple design and its just one file :-) its symetric! consider donating me if you like to sell the file [email protected]
This case was made thanks to this original design: https://www.printables.com/de/model/699857-bitaxe-ultra-1366-case I loved this design but wanted to have the Bitaxe fully enclosed and moved the display to the top side. Maximum total…
Build your bitaxe collection to the moon!! There are 2 variations - one uses a main body with 40mm fans to blow air on the back of the bitaxe and the other has 60mm fans. Also 2 different power supply housings. Enjoy !! Parts used for the…
Bitaxe Standing Case v1 The Bitaxe Standing Case represents a remarkable advancement in Bitcoin mining accessories. Utilizing state-of-the-art 3D printing technology, this case is meticulously designed to provide a durable and lightweight…
The Bitaxe Frame is a Bitaxe Gamma stand that allows for a side mounted fan. The goal was to increase airflow to the voltage regulator and allow for other mods. The fan can be a 40, 50, or 60mm fan. The feet allow for a vertical position…
Bitaxe with 92mm rear fan forcing air over the back of the board and out in the front Enjoy the build! If this saved you some tinkering time or helped your farm grow, a tip is always appreciated. Crypto addresses in my bio. Happy hashing!…
A bracket for Bitaxe mining units, mounted as shown in the photos with spacer screws. Best printed in Glow-in-the-dark PLA. Printed with the following parameters: 3 wall loops. layer height: 0.2mm 20% sparse infill density. Back face of…
Big thanks to w3rN42 for his Bitaxe Ultra design This Remix is for the Bitaxe Ultra with larger display and heatsink display: https://amzn.eu/d/4YhkEjl heatsink: https://amzn.eu/d/75hSTx1 Added several openings for cooling and USB Print…
Bitaxe Turbo GT 800 Duo stand with 92 mm fan with airflow distribution Enjoy the build! If this saved you some tinkering time or helped your farm grow, a tip is always appreciated. Crypto addresses in my bio. Happy hashing! DGB:…
Bitaxe / Bitaxe Ultra Mount System BitAxe/Bitaxe Ultra Single Tray - For mounting a single Bitaxe / Bitaxe Ultra - can be mounted to the main tray or to any surface using M2.5 flat head bolts. BitAxe/Bitaxe Ultra Dual Tray - For mounting…
A bracket allowing for a Bitaxe to be wall or surface mounted. It's advisable to put spacers behind the screws between the bracket and the wall to allow the back of the Bitaxe to ventilate properly. Requires: 4x (6gauge countersunk…
just as the name, its four 2 bitaxe, currently gamma 601. enclosure 120 fan blowing air is forced down and out the botton of bitaxe Enjoy the build! If this saved you some tinkering time or helped your farm grow, a tip is always…
Use the spacers to keep the mounting boards high enough to clear the lower fan. Added a mounting board for bitaxe gamma with holes to mount 40mm fan on back using 3mm screws.
Bitaxe Gamma – VR Cooling Backplate When overclocking the Bitaxe Gamma, the ASIC chip often isn't the bottleneck (especially with a good heatsink like Copperzilla). The voltage regulator section barely gets any direct airflow on the stock…
Bitaxe stand with rear mounted cooling fan. Left and Right adapter for Low Profile CPU Cooler.
Viel Spaß mit dem Model
a mount for Bitaxe Gamma You will need: 4 M3 x 12 4 M3 x 16 4 M3 threaded inserts 4 M3 Nuts 4 Inserts with M3 (from the hexagon wall inserts) You will insert the threaded inserts into the back of the most centered holes that will secure…
Mounting bracket for Argon THRML60 on the Bitaxe suited for pcb models 40x and 60x Print with filament that has a high heat tolerance, personally i print with PC. Print with brim to prevent warping and/or print in enclosure. Print upside…
Fan cover for Argon THRML60 icm with Noctua NF-A6x25 5V PWM for the Bitaxe. Printed with PLA
You will need 6 pieces of M2 fused nut and 6 screws
Why use a normal, boring Bitaxe stand, when you can have R2 mining your Bitcoin day and night? R2's just so cute as a miner! 😊💜 Uses just under 400 grams of filament. I printed ours in PETG. Would probably work in PLA, too.
Used butyl in joints. Wallet magnifier was purchased at Joann's. Buy Bitaxe from; https://www.solosatoshi.com/ https://d-central.tech/
TL;DR: Dies ist der offizielle Polarblocks-Remix des genialen BreakTheFiat Cases, speziell optimiert für den Bitaxe Gamma 601 (BM1370 Chip). Drucke dir dieses Gehäuse für dein lautloses Homeoffice-Setup und schütze deine Hardware für…
A new stand for your Gamma 601, Designed to give a retro steampunk look. Best to paint this to give that desired look and feel. Will need M3 x 6mm screws that thread directly into the plastic. The rear fan will need M3 x 10 MM screws I've…
Just another simple stand for the Bitaxe Gamma 601/602 line of Bitcoin ASIC lottery miners. My boards came with decent 3D-printed stands already, but they assumed just flat desk placement and didn't have very good options for securing it…
Bitaxe Gamma 602 Desktop Stand A custom desktop stand designed specifically for the Bitaxe Gamma 602 open-source Bitcoin miner. The stand holds your Bitaxe upright in a stable position and adds a nice Bitcoin-themed look to your desk…
Pieza sacada de una metálica original que venía con el disipador de calor
My Bitaxe came with a version of this Bitaxe Minimalist Stand stand and I didn't want to print a whole new stand just to mount a fan. This bracket is a quick and easy way to mount a 40 mm fan. A great way to repurpose the original fan…
Print with the main face down, add support for the corners. I haven't tested all heatsink and fan configurations. So please leave a comment and I can make some version with different "lean back" angles. Adorned with my company logo and…
Bitaxe Gamma 602 – Custom Color Fan Shroud The Bitaxe Gamma 602 comes with a fan shroud included — but only in black. I redesigned it so you can print it in whatever color you like. In my case: orange 🟠 How it works: The shroud slides…
The Skull of Satoshi as a Dual Bitaxe Stand. Requires a Noctua NF-A6x15 Fan which is mounted in the bottom of the Skull to keep the Bitaxes cool. Feet to raise the whole thing up included in the files. This print needs supports, tree or…
Stand for Bitaxe 601 Gamma and other versions supports 50/60mm Fan at backside 16-17mm clearance from Fan to PCB generous cavities for nice airflow keeps your bitaxe cool, quite and powerful have fun . Bitaxe Ständer für Bitaxe 601 Gamma…
Quadriga – Modular Cooling Tower for Bitaxe Devices Quadriga is a compact, vertically oriented cooling tower designed to efficiently cool up to four Bitaxe devices mounted on its sides. The system is optimized for continuous operation and…
The Bitaxe NerdOCTaxe bitcoin miner can be significantly over clocked however the 90mm are not up to the task of moving enough air to keep things cool. Additionally 90mm fans are way too loud, unless you want a sever room vibe in your…
This is the updated version of the 90 to 120 mm fans duct adaptor. A number of people asked if I could make a version of the duct with side vent to cool the voltage regulators. on the Bitaxe NerdOCTaxe bitcoin miner. The miner can be…
Bitaxe Turbo GT 800 Duo stand with 92 mm fan with airflow distribution Enjoy the build! If this saved you some tinkering time or helped your farm grow, a tip is always appreciated. Crypto addresses in my bio. Happy hashing! DGB:…
TL;DR: Dies ist der offizielle Polarblocks-Remix des genialen BreakTheFiat Cases, speziell optimiert für den Bitaxe Gamma 601 (BM1370 Chip). Drucke dir dieses Gehäuse für dein lautloses Homeoffice-Setup und schütze deine Hardware für…
Wouldn't it be cool if you could upgrade the cooling and performance of your bitaxe, simply by placing it in a better stand? Now you can. Upgrade any Bitaxe simply by placing it in the CoolAxe Overclocking Stand. Specifically designed to…
The Skull of Satoshi as a Dual Bitaxe Stand. Requires a Noctua NF-A6x15 Fan which is mounted in the bottom of the Skull to keep the Bitaxes cool. Feet to raise the whole thing up included in the files. This print needs supports, tree or…
Hardwire all the things! The first Bitaxe Stand with integrated enclosure for the Ethernet Module which comes with our Bitaxe LAN Adapters . Print as oriented, no supports or special settings needed. Insert the Ethernet Module at an angle…
Fan Cooler for Bitaxe 601 (Bitaxe Gamma) This is a cooling shroud and fan mount designed for the Bitaxe 601 (Bitaxe Gamma) . The design improves airflow through the heatsink by directing air from a standard 120 mm fan directly across the…
