2,384 models
A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
Boxes - it looks simple - but you better go through it just right! Get it wrong, and your axle will get hung on them! Inspired by the flood of Amazon boxes that happen in my house… Printed in PLA Check out my other obstacles as well!…
Print approx. €6.55–€8.00 excl. taxPreliminary estimate for one variant
Small tool storage boxes for tap, drill and end mill with sliding lit. I needed some small storage boxes to protect my cutting tools from damaging each other. Most solutions on the web had sharp corners, complicated locks or was to…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
Pretty simply and easy to print boxes for organizing things in your Festool Sortainer SYS 4 TL-SORT/3. There is a spot at the top of each box for a 12 mm label. They fit well with the official versions of the boxes as well. Included a…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
Print approx. €6.41–€7.84 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to organize our junk drawer we have in the kitchen. I carefully laid out the items to figure out the sizes to hold all of our stuff and then I made a set of boxes that fit snuggly in the drawer to hold each item. I Included the…
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for PETGSource material: PET
This is an edited version of this Sidebox ( https://www.prusaprinters.org/prints/974-prusa-mk3-sideboxes-for-some-tools ). I needed a place to place some electronics, like a stepdown converter, on my MK3s. The original box was a bit long,…
Print approx. €4.44–€5.42 excl. taxPreliminary estimate for PETGSource material: PET
Loved the mesh sideboxes for the Prusa MK3 but could not find any for the Mk2.5. These Sideboxes clip onto the threaded rod of the Mk 2/2.5. Gcode is for PETG and has 2 stops for color change built in at the right points. Have also…
Print approx. €6.45–€7.88 excl. taxPreliminary estimate for PETGSource material: PET
A friend asked me to print some name plates for his apartment building's mailboxes. I'm writing these instructions for myself, in case I need to print more later. You can use this model to make different sized signs with text – just…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Hexagonal boxes, in a variety of sizes. For each box half, you'll need three 6mm x 3mm neodymium magnets. Print two halves to make a box and a lid. Recommended Print Settings 3 perimeters (0.4mm nozzle)
Print approx. €21.94–€26.82 excl. taxPreliminary estimate for one variant
Initially designed for anti-insect essential oil diffuser ( https://www.printables.com/model/124634-octagonal-boxes-for-anti-insect-essential-oil-diff ), I redesign the model to create several boxes with different sizes and make them…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
This 3D model is a stackable storage box system designed for Prusa XL 3D printers. It features a removable grid that fits into the box using a docking system with pins and sliders built into the walls. Primarily made to organise small…
Print approx. €15.81–€19.32 excl. taxPreliminary estimate for one variant
I had anti-insect essential oil diffusers in damaged wooden boxes looking like Camembert ones I designed simple octagonal box and lid with Fusion 360 to replace them. Printed on my Prusa MINI+ with Prusament PLA Galaxy Black and Vanilla…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
Pomocí modifikátoru v PrusaSliceru vytvořen členitý povrch (fuzzy skin)
Print approx. €3.57–€4.37 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Bukinara's lid so that it can support the “Original Prusa Enclosure Mesh Side Boxes for MK4” model. Included is two variants: 1.) Notched version, no hardware needed, simple print 2.) Handle Version, requires handle (bundled…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
This (very) fast-printing trading card storage solution has been specifically designed to print in ‘vase mode’ to allow for very low print times and economical filament usage. Each box holds approximately 400 standard size trading cards…
Printable container boxes for Festool Systainer Organiser (such as item number 204852). The sizes 25x25 and 25x50 are particularly useful for small components. Sizes in combinations of 25, 50, 75, 100 and 150mm. Larger variants can be…
Makita offers this storage container product with or without the matching insert boxes. It's cheaper than the usual organizer of this kind, and interlocks with other toolboxes as well. The container's internal structure provides the usual…
Setting the filament flow ratio correctly for each different brand and type of filament that you use is crucial to good quality prints. These boxes make that quick and easy to do, as long as you also have a digital vernier caliper (an…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. The boxer configuration with two…
1 are covers, 2 low boxes 4 high boxes, 3 low inserts 5 high inserts. Size cca 145x145x39 (54)mm. Inside hight 30 and 45.5mm.
These boxes can be used to store everything that comes in the character envelope for a class (and, if you use the biggest one, even the character mini). This is a remix of jgrg1's character boxes on thingiverse . I've made a few changes,…
Print In Place Boxes Include 6 boxes that fit into each other. Customizable by Fusion360 f3d file (ParameterBoks-V6 v7.f3d) Box sizes are fully customizable with Fusion 360. Sliser settings (Simplify 3D): Box wall thickness are set to…
Edit : I've upload a new version of my drawer - please see version 3 3mf for an easier time! This is the new layout: Original I've finally sat down and documented my way of implementing Gridfinity Refined baseplates in the Harbor Freight…
The boxes come with different sized areas to apply labels: 6 mm, 8 mm, 12 mm, no label. Each set has boxes in the following sizes: 1x1, 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 2x4, 1,5x2. All boxes with width 1 also come in a version with a center…
These boxes are a perfect complement to NTX9's Organic Chess 2021 chess pieces. The trays that he designed are changed into boxes with lids that can be assembled into a full 8x8 chess board, so you can have everything that you need to…
These boxes can be used to store the components for Frosthaven classes. This page contains the character-specific files meant to be used with the base box here . For each box you will need to print 3 models: one of the…
Magnetic boxes to hold player tokens and food during play as well as a box to hold goal and automata cards. Designed to fit with my full set to completely organize the Wingspan box. Magnets are 6x3mm which actually come out to about…
Modified the upper interface of HEPA to allow it to be freely placed above or below CARBON Change CMag wall thickness; Add Long Carbon and CMag; Add Short Hepa;
6x3mm magnets used for lids dragon shield sleeves/ One piece official sleeves tested to fit Ultrapro toploaders tested to fit in Commander/ Leader slot comment if you want different/more designs on lids
Stackable ammo boxes in various calibers with sliding lids. Designed to take up minimal storage space. This version uses rounded edges on the lid. It's more ascetically pleasing but some printers/filaments may struggle with bridging. You…
These are modular containers that fit in Tactix/Montgomery/Keji brand 12 compartment storage boxes. The containers can be easily moved between boxes and rearranged to make any combination of storage sizes. They are designed to fit within…
A stackable storage solution for Marvel United Cardboard Locations & Villian Dashboards , as well as Plastic Tokens . Two sets (6 total boxes) can hold all the deluxe components from all 3 seasons. Add 6x3mm magnets to the box top & box…
💧 Modular Hydroponic System from 50 mm PVC Pipe – for Growboxes A flexible and easy-to-assemble hydroponic system based on 50 mm PVC pipe. Allows you to build any length installation perfectly fitting your grow tent (growbox). The system…
Nests in drawer indentations and has a chamfered base to easily grab small parts from the bottom. I
I wanted a different order of filters in my Bento Box v2 . Activated carbon can be very dusty and I don't want that dust in my printer. This remix provides two new models to use alongside the original Bento Box 2: A HEPA box that fits…
One of the force multipliers to successfully use gridfinity is the ability to make lots of boxes quickly with vase mode. All the multiple unit models I could find required printing the base of the box separately and gluing on later to be…
Changed diameter of sticks so Five33 Ripsticks fit. Inner Diameter 17mm
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box containst Wago connectors (221-415 and 221-613). The connectors will clip in place, for convenient extraction are some slits in…
Here are 2 boxes I designed for board games "Codesnames" and "Codenames Images" (french version of Codenames Pictures, but I guess the content is the same). Both boxes fit in one single game box, but you can also take only one with you.…
This insert is perfect for you, if you love the game Everdell but not quite enough to invest the money for the complete collection. I put the emphasis on easy set up and tear down as well as a chunky look. It uses three boxes and quite a…
These boxes can be used to store the components for Jaws of the Lion classes. This page contains the character-specific files meant to be used with the base box here . For each box you will need to print 3 models: one of the…
its a very simple pokemon card divider ive made for my collection, very simple and require not a lot of materials.
OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER Allows to mount a HDMI 1080p display Fits in the original radiomaster boxer carrying case - no disassembly required Easy assembly Can hold over 800 grams of weight Model…
This is a set of boxes with magnetic lids for the armies in the board game Neuroshima Hex. It should be fully compatible with Neuroshima Hex 3.0 and the 2020 Morloch Edition. There is a box for the standard armies (plus the special HQ…
Here an Collection of Sorting Trays I use in my Studio to Organize Screws, Running Projects etc. The Alingment Tool is Used to Glue the Botton pieces onto the Boxes so you can Stack them.
Automated Air Filtration System for Cat Litter Boxes - Universal Fit - Customizable This is a universal, Arduino-powered air filtration system designed to be mounted on virtually any cat litter box. The goal of the project is simple:…
Boxer Puppy – Cartoon Style (Lying Down) – Two Sizes Say hello to pure puppy charm! 🐶 This 3D model captures the spirit of a young Boxer pup in a cozy lying-down pose with a cheerful cartoon twist. From its oversized paws to its bouncy…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the hinges use M3x25 mm cylinder head screws with two…
Some handy boxes, update 2 - 2 boxes 20 and 30 mm high “15 compartments” version For other heights , have a look at : 10mm - https://www.printables.com/model/202486 20mm - https://www.printables.com/model/202483 30mm -…
Component boxes for Ticket to Ride Gothenburg. They player boxes have room for all the trams and a separate compartment for the stations and the scoring marker. The tickets have their own box while the tram cards gets a holder that fits…
This downloadable 3D-printed set of Gridfinity-compatible containers keeps your Mammotion Luba lawnmower accessories tidy. The set includes containers for the following items: Ground pegs Key and accessories Allen Key Blades The set…
Looking at all the other ammo boxes around I did not find anything I liked. Either they used square holes, limiting how much they held, or they were an odd size that didn't fit my ammo cans... So I just made my own. I targeted the 3 types…
The smallest version comes in 6 size variants and each with 3 height variants. The medium version comes in 2 size variants and each with 3 height variants. There is a big variety of inside boxes but if one that you want is missing just…
A lower version of the previous toxic containers. Another one in the Rugged Box series , this time a cylindrical box with a screw-on lid and various types of hazard symbols!!! Toxic, Biohazard, Flammable, Radiation - all nasty stuff!! For…
Originally inspired by a similar design by Jeff510 for the Wingspan board game , I redesigned this from scratch to be completely parametric and modular, adding various different types of token & card boxes, as well as thin card trays. The…
Frame with modified holes for EU electric boxes that we all have at home. Just take out the original switch, connect the wires underneath and screw the frame in place. You can then normally click on the Philips hue cover plate with the…
This is a remix of 3dprose's hygrometer mount for Sterilite storage bins. The original model is designed to fit on a ridge on the underside of the lid. However I found that the fit was too loose for the 54qt and 80qt storage bins (maybe…
This bracket is for mounting an ESP32-Cam microcontroller in a bird nesting box. There are fixtures for 5mm LEDs. I use infrared LEDs, so the camera can be used in the dark without visible light. However, this requires a small…
A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…
A sectional container for storage of small objects such as screws. It can also be used as a pillbox. It can be printed with either 6 or 8 sections in 3 sizes: small (50mm), medium (100mm), and large (150mm). There is also a small…
The lid is the same for the two boxes v1.2 2025/09/06: Fix expansion box to correctly fit 4 asteroids v1.1 2025/07/09: Update design to make the lid orientation more clear Upload the lid as separate file Upload .stl files
A simple design for guides that can be used for home-made molding boxes used in metal casting. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 80% Filament: Copymaster 3D PLA 1.75 mm…
More coming soon I have other components that will be added, soon :tm: Player Component Boxes Each item (Lid, Body, etc) should be a single assembly. Everything has a “LayerN” value. This is the order in which the items need to be put in…
Some handy boxes, update 3 - 2 boxes 10 and 20 mm high “5 compartments” version For other heights , have a look at : 10mm - https://www.printables.com/model/202486 20mm - https://www.printables.com/model/202483 30mm -…
Revitalize math learning with these specially designed cards for the Math Robot (link: Math Robot Model ). Each set includes multiplication and division equations. Organize them seamlessly in labeled boxes for easy access. Highlights:…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box containst end sleeves. These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the hinges use M3x25 mm…
These are boxes for the Corvid Conspiracy and Underground Duchy from the Root Underworld expansion designed in the same style as https://www.thingiverse.com/thing:4235498 , which is itself a remix of…
Needed a bracket for Smart Store boxes, so I could hang them under shelfs. Fits box size Classic 10 - 50 Might fit other sizes too.
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains up to eight USB drives for different applications. I used these USB drives. These boxes fit the inlay of my Peli 1560…
The original design didn't allow for installing, removing the sidebox while the printer was assembled, or so it seems to me. This modification retains most of the functionality but allows you to install / remove the box with any frame…
For safe storage of LiPo Batteries I use used ammunition ammos which are available e.g. on ebay at low cost. Important: The ammo cans are sealed waterproof. Cut out a small piece of the seal for possible exhaust in case of a thermal…
Prints relatively fast so you don't have to wait forever to change the filament. ;) Also added the recent design with the elliptical hypen. At 0.2 mm layer height change the filament after printing the 4th layer.
I moved my P-Touch out of the original box into a L-Boxx 136. This allow me to store more label tapes. So I created some boxes for the batteries, power supply and the label tapes of course. It can be printed in any filament you want.…
This is a 1x2-grid storage box for multitool blades. These come in ¼, ⅓, ½, ⅔ height (where full height is 75mm), so you can print a few and keep your used/new/wood/metal etc blades nicely organized. The boxes are compatible with…
Update 2026-07-21: I've uploaded a version 2 that requires fewer cuts in the lunchbox. Update 2026-02-05: I've added a clip to hold the first link outside the box https://www.printables.com/model/1587049-boxer-pro-belt-clip There are a…
I was really excited to ‘pimp’ out my copy of “Survive: Escape from Atlantis” to include not only the inserts from ‘glitch17’ found here: https://www.thingiverse.com/thing:2789823 but to also incorporate the ‘Better Boats’ from ‘vzom’…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains 4x AA, 4x AAA and 3x 9V-Cube. These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the…
All credit goes to CandianKorean. I just took his design an resized it down for a 230mm x 230mm box. I also added two optional risers to keep it tight height wise. Category: Games
The best way to organize and decorate for this spooky season. Here is a set of Halloween themed boxes perfect for storing all the little things you want. No matter what you use them for: to organize your desk, at the candy table at your…
These are two different boxes for Sushi Go! Both boxes have a shop top lid. The difference is that I embossed the lid differently on them, one is just the plain text, the other has the game symbol with the text inside that.
Holder for screw boxes of various types for Festool workbench Holder suitable for Festool table rail, you can organize your screws of different types.
I've had some cheap, small (9.5 x 10 x 5 cm / width × depth × height) stackable boxes lying around that I bought in a set made by "deuba." They came with their own plastic mounting system, which I ditched because I wanted to go a more…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains some small drum equipment: DrumKey Cymbal proctection sleeve with some felt CymbalNuts These boxes fit the inlay of my…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains my Swissonic Basic Router (MK2). The router is secured with the lid so the antennas wont break. Beneath the Router…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains 11 packets of 5x20 mm fuses. These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the…
Hi there! This time I brought you a printable upgrade for your 3D printer. I made a simple and clever boxes to have a cleaner space around your printer. Other bins where too small for supports and similar kind of trash from printing. So…
I've created this holder, to look like a cooler for great models of @Bootjevaarder: https://www.printables.com/cs/model/379935-4-stroke-flathead-boxer-engine https://www.printables.com/cs/model/144943-constant-mesh-two-speed-gearbox Easy…
These are boxes which fit neatly in the space left by the cardboard insert in the box of the 2005 Avalon Hill edition of Robo Rally (and possibly others), and which contain all the cards and tokens (with the exception of the sand timer).…
Just a simple organizer with boxes that I've designed to use in the bathroom but I guess it could work pretty much everywhere! You can set the boxes in different positions and match the dimension of the base. Printed in PLA Marble for the…
I opened one side of the box for the side cutter. I can't use the longer version of the box, because of the mounted anti vibration foot. The model is for the right side of the printer. To mount the box on the left side, use the “mirror”…
Inspired by the various organization systems of Zack Freedman and Alexandre Chappel, I was never satisfied. All system do not fit in my drawers or boxes. After some back and forth I decided to create a system that is compatible with Lego.…
Adds lids to the player pieces so that you can store vertically, and with the player boards flat.
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Containers for class tokens and cards for Descent: Journeys in the Dark, second edition. Inspired by https://www.thingiverse.com/thing:431859 , but adds class specific tokens (if used) to each box. There are 3 sizes, depending on the…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains my Swissonic Basic Router (MK2). The router is secured with the lid so the antennas wont break. Beneath the Router…
![[ALCH] Stackable storage boxes for multitool blades (ModuBox)](https://media.printables.com/media/prints/3df5b320-2252-4dd4-ab2e-78bcfee6cbfe/images/9921554_e7d8db92-9584-4e7e-b424-a95f5fa774f7_bbace89b-bf0b-494e-8d8f-ad49f9e5c46c/img_4220.jpeg)
