Counting matching models…
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant
NEW 3 face corner bracket: https://www.printables.com/model/1390968-strong-corner-bracket Simple 55 × 55 × 15 mm corner bracket designed for M3 screws. Easily scalable for larger applications. Features: Pre-sized for M3 screws Compact and…
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Strong corner mount brackets. Mounted using screws d=3mm :)
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Print approx. €7.17–€8.76 excl. taxPreliminary estimate for one variant
The Strong Corner Bracket is designed for reinforcing corners where three panels meet at 90°. With dimensions of 50 x 50 x 50 mm , it includes screw holes suitable for screws with a diameter of 3–4 mm . To reduce material usage without…
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
I wanted a stronger lack bracket. Print instructions 40-50% infill 3 Walls I use PETG, and 0.3mm layer height. 4 x 25mm screws works fine.
Print approx. €7.79–€9.52 excl. taxPreliminary estimate for PETGSource material: PET
General information Simple mounting bracket for Nema 17 stepper motor with holes for 4mm screw. Print instructions Layer Hight: 0.2mm Infill: 20% Supports: no Nozzel: 0.4 is recommended
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
Print approx. €6.09–€7.44 excl. taxPreliminary estimate for PETGSource material: PET
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
MODEL DETAILS For use with ‘Revo Connect’ nozzle holders . A bracket for your Prusa MK3. Should also work with MK2 printers. Slots into the top of your frame, with the E3D logo facing forwards to avoid Z-axis collisions. RECOMMENDED PRINT…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Bracket for a wire cutter. Fits on a IKEA Skadis Board. Base on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Durable "bubble" style shelf bracket. Didn't tested, but I think one bracket can hold at least 5kg. 4mm screw hole, other dimensions in the screenshoot. Print tips no supports
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
Need to mount your shiny TS4 under your desk or monitor stand? This print will do the trick. Once the bracket is mounted, the TS4 can be easily slipped in and out via the integrated retention clips. Simply attach the cables to the back…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
I loved Zachary's model however noticed the new V1.2 of the BTT EBB36 board is larger and the model doesn't fit the board, I recreated a new version in Fusion360 for the new dimensions and it works a treat :)
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
My Dewalt Stick Vacuum is quickly becoming my favorite tool. SUPER cheap compared to a Dyson. I already have several Dewalt 20v batteries, and it's right at home in the garage for a quick tidy. Only problem was: there was no wall mount…
Print approx. €5.72–€7.00 excl. taxPreliminary estimate for one variant
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: The "remix_drip_bracket_7.2" version (shown in blue) fits better and centers the build plate over the resin vat better. I will remove the earlier version to prevent any issue of downloading the wrong file (earlier version shown in…
Shelf bracket for M6 screws 150 x 150 x 50 mm 10 mm wall thickness 100 mm screw distance
Print approx. €6.31–€7.71 excl. taxPreliminary estimate for one variant
TP-Link Tapo C200 is a nice IP camera from TP-link. This is a bracket allowing it to wall mount in upright or downright position.
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Printet on prusamini with low detail and 15% infill
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
Bracket for Govee Neon LED Strip Light. I've had great results printing without any brims with PLA on Smooth Steel Sheet PEI. Screw hole is small enough that it didn't need any supports.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Note: This design is not mine. The original creator of these parts is pekcitron . The parts were reworked by jltx and uploaded here . Many of you will never find / have found these parts on Thingiverse, but since I think this upgrade…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET
Check the Screwiverse Remixes for other attachments designed for these threaded inserts. These don't fit when the original HSW base/hollow inserts were printed highly overextruded. This is actually something I'd like them to do (that's…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Plate locks the Nest doorbell down, replacing included metal plate. Use the key: https://www.printables.com/model/466189
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Shelf bracket for M6 screws 150 x 150 x 50 mm 10 mm wall thickness 100 mm screw distance
Print approx. €9.43–€11.52 excl. taxPreliminary estimate for one variant
Aufbewahrungs Kontainer mit Wandhalterung, Stapelbar. Organisiere dein Alltag und bringe ordnung in dein Leben. Es werden zum Beispiel solche Schrauben benötigt: https://amzn.to/41Z0I4K --------------- ENGLISH -------------- Storage…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET
This is a bracket to allow you to hang your tonal fitness system accessories when not in use. I've mounted them to the bottom of the bench to hang the bar, rope, or handles when not in use. The center hole allows for a #6 or #8…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
I designed a PCI full height bracket for my LSI 9211-8i HBA card since it didn't come with one. I used two M3x8 screws that can cut their own threads, but you can also use M3 nuts to secure them (I did). The two holes are spaces 54mm…
Print approx. €95.57–€116.81 excl. taxPreliminary estimate for PETGSource material: PET
I have an older Cooler Master CM 690 II Advanced that I still like a lot but it lacks space for intake fans like modern cases. These brackets allow for a 120mm fan to be mounted along with one disc drive in the 5.25" bays. This helps push…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for PETGSource material: PET
Set of designs to make a ‘table top’ or connector for on top of a DeWalt Tstak toolbox. I used one to create a connector to hold my Ryobi Vacuum on top using https://www.printables.com/model/1044158-ryobi-link-wall-mount-single-cleat as…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Topology optimized shelf bracket for a small shelf with a depht of 10 to 15 cm. You can mount it to the wall with 4-6mm screws and secure the board with a short screw through the top. The model can be printed perfectly without supports.
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Metal rods for board in cabinet wern´t enough to support weight. So I designed some brackets with to holes to screw them in place. When I uploade the model I realized there were already some similar models so I added this my model as a…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
I needed a bracket to hold some of my pool stuff to the frame and this is what I came up with. I also have the holder for the valves for the pump and such too. It needs to be printed in PETG, ABS, or ASA (for UV protection) I tested PLA…
Print approx. €2.73–€3.33 excl. taxPreliminary estimate for PETGSource material: PET
I needed a wall shelf and decided to use two of the BESTÅ Shelf, white, 22x6 1/4" from Ikea. I designed this wall bracket to hold two shelves and add a little flare to my wall. I decided to make it hang with cleats, so that it would be…
Print approx. €8.32–€10.17 excl. taxPreliminary estimate for one variant
Addon for twin slot shelving sracket to hold what you want (hover part,bags,...) Print the base and the required module : fork, unicor or triceratops.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
You can download with or without the inscription.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Microserver Gen8 SSD bracket for four SSD's I've created this bracket based on thing:1279920 from Oliver Oswald . I initially had above printed in 2017, but the moment i got it i was displeased with it because of how it was designed. It…
Print approx. €2.11–€2.57 excl. taxPreliminary estimate for one variant
This simple shelf bracket offers very easy and precise mounting thanks to its central mounting hole , which allows quick alignment and secure screw placement. The geometry provides enough space for inserting screws smoothly and without…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
See photo for placement on prusa mini and you can print directly without any support. Printet as speed print and 15% infill
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Made for a friend who had two Behringer synthesizers he wanted stacked on top of each other. Uncertain if the hole pattern works for other models but taken from the Behringer Model D. Made to replace the side cover and use the original…
Print approx. €8.65–€10.57 excl. taxPreliminary estimate for PETGSource material: PET
I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Upper fan bracket that hides Extruder Wires. Uses original hardware, thread rear screw all the way in before install, this prevents pinching wires. Use ball end hex wrench. Prints perfect. Fits great. V2 is more refined.
Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
These brackets work perfectly for my DIY version of the VFLAT World photography brackdrop/background system. I made mine out of wallpaper, posterboard, and foam board from the Dollar Tree. Works great! Print 2 for a complete system.…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
Dieses Modell ist ein Wandhalter für eine Gasflaschenkappe, wie sie bei den klassischen 5 kg und 11 kg Gasflaschen (Camping, Gasgrill, …) verwendet wird. Ich habe ein Modell mit und Eines ohne Schraublöcher hochgeladen, dann ist man bei…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
PCIe Mining Bracket Is your mining rig keeping you up at night, dreading that those unsupported PCIe adapters are going to wriggle lose destroying your rig and precious hopes and dreams? Rest easy with the PCIe Mining Bracket. This puppy…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
I made these brackets for the xtrons PX7439BL radio because the supplied radio brackets did not fit very well. Printed from ASA for heat resistance and strength. No need to buy additional screws or nuts, just the original BMW radio screws…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
Second Version I was trying to use the David D version of this print to stop by chickens from perching in an area. Those crafty girls decided they could “fix” it for me and was in pieces the next day. This bracket is a bit more rigid,…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
A wall mount bracket to Click-in the Bosch AL 1115 CV battery charger, with an additional cable holder to roll up the cable when not in use. To take the charger with you, just click it out of the bracket. Use three 3.5mm countersunk…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Leviton Structured Media Cabinet Bracket for UniFi Switch Lite 16 PoE. Print instructions Recommend using Supports to support the lip that holds the switch.
Print approx. €7.83–€9.57 excl. taxPreliminary estimate for one variant
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
UPDATE 03.01.2022 I updated the bracket because the walls are a little bit to thin. Now it's also the same design as my wirecutter bracket. A bracket for a longnose pliers. Fits on a IKEA Skadis plate. Base on the Fusion 360 peg models…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Update 02/28/25. – A few people have had issues with this fitting their vehicle. It was designed to fit my Nov. 2023 R1S VIN 23 XXX. I don't know whether this is related to a change in the tow hook size by Rivian in later builds or a…
Print approx. €6.83–€8.34 excl. taxPreliminary estimate for PETGSource material: PET
With the way my enclosure lights are set up, the default thermometer mount was hard to read. This is a remix of the official "Adjustable Thermometer bracket for Original Prusa Enclosure" that instead mounts to the top of the printer…
Print approx. €1.76–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
Filament shelf supports for storing filament spools, filament spool boxes, etc on a wall. Designed to be used with standard 0.5" EMT conduit. Inspired by RepRack https://www.printables.com/model/129024-reprack-system-by-repkord but design…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant
A bracket to mount a DIN rail in the electronics compartment of a Voron V0.2 The design is inspired by this model but a completely new design. Instead of a friction fit the rail is mounted with a bolt into a heat insert. The pre-sliced…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
A simple clean looking Bracket for a shelf 13x13cm in size, Pretty stable with 15% infill. // Ein simpler Regal Winkel für Regale, 13x13cm groß, Ziemlich stabil mit nur 15% Infill.
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Dies sind zwei sehr stabile Halterungen, um eine Leiter an der Wand aufzuhängen. Eine Halterung ist innen ca. 120mm, die andere 140mm lang. Die Befestigungsbohrungen sind ausgelegt für 4mm Senkkopfschrauben. Translation: DeepL These are…
Print approx. €5.95–€7.28 excl. taxPreliminary estimate for PETGSource material: PET
Use the bracket on its own for wall mounting or also print the cable holder, so you dont have to think about plugging the vaccum in to charge it. The parts have a registration feature so no measuring required, just a drop of glue (I used…
Print approx. €7.22–€8.83 excl. taxPreliminary estimate for one variant
Broom reinforcement brackets to stabilize the broom against lateral forces Improves overall stiffness of the broom Better durability for heavy duty work Hexagon style cut out Suits 20° angled broom handles, e.g. available here 5 common…
Print approx. €3.97–€4.85 excl. taxPreliminary estimate for PETGSource material: PET
Motivation (english) I have a second Bosch Powertube for long distances and attach it to the luggage rack. My mount allows for easy, stable and secure attachment. If you also need a mount for this purpose, but don't have a MIK adapter…
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for PETGSource material: PET
I wasn't happy with the brackets that came with my dual Z stepper upgrade kit - so I designed some new ones that are stronger and also have slots in so you can adjust the height of the power supply. You can even lower the power supply so…
A bracket for mounting a collection bin (Akro/Uline type) under the exit ramp of a Lee Automatic Processing Press (APP) mounted to an InLine Fabrication Quick Change plate. The bracket indexes off the right mounting bolt on the APP and…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for PETGSource material: PET
Wall mountable holder for Kobalt 40V batteries. Designed to store my many Kobalt batteries up and out of the way by attaching them directly to some 2x4s along my garage walls.
Print approx. €5.77–€7.06 excl. taxPreliminary estimate for one variant
Mounting bracket for the XL4016 DC buck converter module from AZ-Delivery.
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Swing Seat Roof Canopy Bracket. Printing Instructions: Resolution: 0.15 Infill 30-100% Supports: No Rafts: No
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Making your own eurorack case? Then you might want a 1U row! Modeled this bracket based on the Intellijel 3U Z-Rail brackets so it's sized to work with M4 screws. Holes are countersunk as well for a nice flush mount. Attach the bracket to…
Deutsch: Stabiler und schlichter Regalwinkel zum Befestigen von Regalbrettern an der Wand. Das Modell ist in zwei verschiedenen Größen verfügbar: 210 × 250 mm (für größere Regalbretter oder höhere Belastung) 160 × 190 mm (für kleinere…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Voici un modèle de support mural pour vos accessoires Dyson V12 & V15. Le model nécessite des supports peints que vous trouverez en images dans la description.
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
Mounting Bracket for Bowers & Wilkins FPM6 Speaker
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
About I couldn't find a hook like this so I designed one myself! I've been using this to hold my backpack for about a week, it's been working great so far. Dimensions Total height: 71mm Hook width for backpack: 7mm Hook width for closet:…
This is my design of fully functional angle brackets. I created them especially for the FFF process to be printed using PETG or ASA material. These prints require a well-calibrated printer and high-quality filament to be functional. If…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Designed this in FreeCAD to fit Godox 60×60 foldable soft box that comes with an S-type bracket onto my Godox SL100D videolight. The FreeCAD (v0.16) source file is included. I've explained the whole process in this video:…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
Hazard Warning Triangle Brackets. Will also fit Mini if the 'key slot' to the rear is removed. Remixed by Tom Tom Jarves on thingiverse. Original by ShaemusOdonnelly
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
Cable management bracket for IKEA BEKANT desk, meant to go around the 17mm thick MDF top. Step file included
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
As a vehicle wrapper, I need my wrapping lettering tools every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. In order to be able to store smaller…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for PETGSource material: PET
Print with supports in PETG. You can forego supports and test your printer's bridging. :) Mounts using a few smaller wood screws.
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for PETGSource material: PET
Microserver Gen8 SSD stacker The accompanying 9.5MM stacker so that you can stack two SSD's on top of each other. For use with Microserver Gen8 SSD bracket for four SSD's. Has text “9.5mm drives” printed onto the print. Made with…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Thanks to reddit user hclrke for providing his design so I could fine tune the hole spacing and vertical supports. Used M3 socket cap screws of suitable length to mount the plate to the Mele as well as to mount this assemble to PPBAV2. I…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
This mount is easy to print, resource friendly and reliable. There is no need to use two handles. But it can certainly add grip security. You can use doublesided tape/something else to make it REALLY tight. I'm recommending PET-G or ABS…
Update 11/18/2024: I have added a version with larger openings for round cables. This is a quick little cable bracket for the TP-Link TL-SG105 5 port ethernet splitter/switch. Bracket will snap or slide into place on the unit. It allows…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
I remixed the original case and thickened it enough to allow for the fan to be mounted inside. I also added a ribbon cable tab below the Pi's USB connections. With the added thickness, I was able to pull the ribbon cable out vertically…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
A simple bracket to mount a CyberPower Surge Protector (model P704U) under a desk. The screws holes were sized for my #8 screws (5mm) - in theory, any #8 screws would work. Printing I used HatchBox Matte Black PLA filament @ 220C. I…
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Double and triple Loxone Mounting Brackets (https://shop.loxone.com/enen/mounting-bracket-double-silver.html, https://shop.loxone.com/enen/triple-mounting-bracket-silver.html) have non-standard box spacing of 98 mm. Installing three…
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for PETGSource material: PET
A simple bracket to allow you to wall mount a Unifi EdgeRouter-X while keeping access to the ports clear from obstructions. Print two and mount the ER-X such that the ports exit the bottom of the device. Note: One pair of rubber feet will…
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
These brackets are easily lost but when you decide to attach wAP ac to the wall you will need one, so I designed one :) It is a nice fit and easy and fast to print, no support needed. I used 3 (0.4mm) perimeters and 1mm top and bottom…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
