920 models
My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…
Print approx. €6.45–€7.88 excl. taxPreliminary estimate for one variant
Info: original-size casssette case with realistic tape lookalike design drawn on the case Print info: can be printed in place or separately, because as everybody knows - cassete cases can be dismantled and this in not an exception (with…
Print approx. €3.33–€4.06 excl. taxPreliminary estimate for one variant
All Carcassonne figures available (including expansions) to replace the ones you have lost or to create full player sets to be able to play with more friends. The figures are separated into two large groups, those that belong exclusively…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
The Ultimate Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a version with…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
If you only want to print one page, you have nothing to do, but if you want two pages, you can glue or use the pins to assemble When assembling, push the pins into the vices or press. For safety, print out a double dose needle. The pins…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
U původní mřížky byly zámky na můj vkus až příliš volné, upravil jsem tedy přesnost zámků, těsnost políček pro dlaždice a trochu snížil výšku oddělujících křížků. Díky moc za původní model, který jsem jen lehce dotvořil ke své…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Catacombs of Karak is a great game full of emotions. Sometimes these emotions turn into dangerous movements and can distort cards on the table. This 4x4 grid helps with that. And oh yeah, its **stackable** and **connectable** too! You can…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
The Ultimate Double Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Medical and chemical labs use lateral flow tests to test for the presence of specific compounds in a sample. You may already experience with this type of common lab test in the form of a home pregnancy test. This cassette is a holder for…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Audio cassette box. (Obal na běžnou audiokazetu.) Print instructions =EN======== Audio cassette box. Like the original box. Used thicker walls for better coherence. If you want an original size, print 99% size. I think, nozzle 0.4 is…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
Picasso's Guernica 3d Fixed floating parts in blender and meshmixer. Added UV Texture. (very slight) Overall .2mm displacement at size. so should be fine to print at .15 will get at least 2 layers with thinish areas. Cannot promise…
Print approx. €23.14–€28.28 excl. taxPreliminary estimate for one variant
I recently came across another cassette-style card wallet here on printables, and fell in love with it! I decided to try my hand at modeling one a little bigger so here is the result. Uses 4 m3x8 Screws and 4 m3 nuts. Super glue needed to…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Držák mřížek pro hru Karak / Carcassonne - kompatibilní je s touto mřížkou (pojme 16 kusů): https://www.printables.com/model/1150222-karak-carcassonne-4x4-tiles-grid-mrizka Tisknul jsem na MK3S+, 0.20 Quality, PLA silver.…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
As promised this is a functioning part that replaced the Zortrax HEPA-Carbon filter. This can be used with the AirManager2 that can be found here:…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
PRUSAMEN Galaxy Black - PETG Body - Corp : Layout - couche - 0.3 Screw - Vis : Layout - Couche - 0.2
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
Cassie (Octonauts) cookie cutter
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
UPDATE: 8. August 2026 made Automatic Cassettes available for the buffer UPDATE: 26. November 2024 Adapted the top-buffer-mount for R4 Cassettes (from bluex ) wich has 0.8mm more lenght space and guides to hold it better in place. Now it…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
Cassettiera stampabile senza supporti- Corpo in verticale, con giunzione posteriore
Print approx. €5.79–€7.07 excl. taxPreliminary estimate for one variant
A simple fun Meeple button to sew for the Carcassonne lovers. The regular size is 25mm x 24.28mm x 2mm, then it is good for pants or jackets, actually even some fleece shirts too and bags/pockets with flaps. I've added a smaller size,…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
This isn't a very complex remix. All thanks to the original model including the .step file. I've added screw holes for real screws and included hollow areas that can be filled with buckshot, fishing weights or sand (if using sand wad some…
Print approx. €10.35–€12.65 excl. taxPreliminary estimate for one variant
This is a replacement part for the cover that always someday breaks. There exists a lot of variants. These are for those prerecorded audio Compact Cassettes you got for audiobooks or music recordings instead of LPs. Settings Value Infill…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Labyrint -card box rounded
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
Cassiopeia constellation Keychain. If you print it in one color, it looks good. If you print it in two colors and use a natural or translucent filament as a base, when you illuminate it or place it in front of a light source, it will look…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Before : After: Prints fine on a Prusa Mini. I suggest changing the filament colors 2 times to get outlines on the top and bottom. To save on filament and print time there is .3mf file that removes the bulk in the middle.
Print approx. €8.48–€10.37 excl. taxPreliminary estimate for one variant
Today’s design is a playful twist on a classic: a meeple inspired by the board game Carcassonne , redesigned to be stackable and balance-friendly . The proportions and geometry were adjusted so meeples can be stacked on top of each other…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Sony Sports Walkman : Cassette Player 2 hinges. 3 walkman parts !!! Will probably need to trim down edges of hinges on lid or back. Needed to do some offsets post production and forgot to recalibrate the hinges… bit of sanding should…
Print approx. €12.93–€15.80 excl. taxPreliminary estimate for one variant
The original obelisk https://www.myminifactory.com/object/3d-print-obelisk-in-ghent-belgium-17375 was too tall and broad, but I like how it looks. I scaled the height down to 30%Z and the X and Y scaled down to 55% So now its the right…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Are you tired of fumbling through bags and boxes during your "Carcassonne: Hunters & Gatherers" adventures? This meticulously designed 3D printable insert brings order to your game, making setup and teardown a breeze! Features…
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
A stained glass effect decoration. The image of the Nativity. “Picasso style” It has only two pieces, the negative and the positive. The filler (stainlesinside) should be printed as many times as we want in different colors and the more…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
To use your retro audio cassette shelf to store 18 SD cards per slot.
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
This is based on the Bahtinov mask generator script by brentb . Should fit most 5 inch telescopes, but was designed for the dimensions and aperture of the Celestron Astro Fi 5. You can hang it off the orange rubber seal of the original…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for one variant
Cass is a popular beer in South Korea. I created these coaster models as a souvenir for me and my friends. I hear that the Prusa Team loves beer so, here's to discovering and trying new beers from around the world. Printing Instructions…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
Object/type/model: Citroen C4 grand picasso 2015y. Part: Mounting point of battery holder Description: So citroen greatly design battery holder mounting point as you can destroy it on first unscrewing. But we know how truly save…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
Carcassonne ghost grid. For new big card - you need only one for this card. next grid could be from original KARAK - tiles grid
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
This game insert is designed for Carcassonne and fits perfectly into an expansion-size box with outer dimensions of 19 × 13.8 × 6.5 cm . The insert can store: Carcassonne base game Multiple expansions, including for example: Traders &…
Print approx. €2.40–€2.94 excl. taxPreliminary estimate for one variant
Věž upravena tak, aby spodní karty byly povysunuty o několik milimetrů a snadněji se vyndávaly. Další karty v pořadí se také automaticky povysunou. Víko lze použít původní od #Ctihy ( @Ctihy_2822890) . The tower has been modified so that…
Print approx. €6.88–€8.41 excl. taxPreliminary estimate for one variant
Carcassonne box inset for basic game and 1. (Inns and Cathedrals), 2. (Traders and Builders) and 5. (Abbey and Mayor) expansions. It is made to be compatible with Carcassonne grid tiles ( link ).
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Done in FeeeCAD, sliced in PrusaSlicer for i3 Mk3S+ filament changes at 30, 60 and 90 mm using PLA silk. No support.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Permet le rangement des couvercles de casseroles de marque Cristel, mais certainement d'autres aussi. Diamètre 20cm et 16cm Se fixe sur l'intérieur de la porte de l'élément de cuisine. Je joins le fichier Fusion pour qui voudrait…
Print approx. €4.75–€5.81 excl. taxPreliminary estimate for PETGSource material: PET
As a child in the 80s, I remember scraping ice off car windows with a broken cassette tape case. This model is a throwback to that era, modeling the general shape of a cassette case half. A silhouette design of a cassette B-side covers…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Držák dlaždic pro hru Karak / Carcassonne u kterého jsem oproti originálu pouze upravil rozměry, aby pasoval do mnou zvolené sestavy insertu do hry Karak. Tisknul jsem na MK3S+, 0.20 Quality, PLA silver.…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
I printed the box from https://www.thingiverse.com/thing:2066307 but I didn't like the clear lid so I made a plate name for it.
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Coperchio cassetta derivazione AVE 2502 Stampato con PLA azure film White e Prusa xl 5T
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Vervanging van een kapotte dop van de kookpot, De oude was afgebroken op de draadstang. Replacing a broken cooking pot cap, the old one had broken off at the threaded rod. Pour remplacer le couvercle cassé d'une casserole, l'ancien…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
I needed something to protect my solar filter… so I designed a rudimentary one in Prusa Slicer. It’s not great but it works for me. The slicer wouldn't export a .stl file for the bottom piece, so I only have the bgcode file for that for…
Print approx. €7.65–€9.35 excl. taxPreliminary estimate for PETGSource material: PET
Jedná se o podložku pro hru Děti z Carcassonne, na kterou lze umisťovat kartičky. Jedna varianta je obyčejná, druhá nabízí možnost si přidat do hry pro zábavu, popřípadě pro hraní s dětmi, branky. Pozor, verze nejsou kompatibilní. K oběma…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Jedná se o jednoduše tisknutelné soubory. Lze je vytisknout bez podpěr a při standardním nastavení. Prototyp byl tištěn z PLA při 220°C/55°C (0,2mm speed).
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
per sostituire il cassetto rotto ed aggiungere degli scomparti su misura per gli acessori e le punte dell'avvitatore. I forellini sui lati servono per eventuali coperchi. Il cassetto originale aveva un pomello un po' scomodo l'ho…
Print approx. €6.84–€8.36 excl. taxPreliminary estimate for PETGSource material: PET
a simple platform with holes to fit round toothpicks for a spacer that keeps foil or plastic wrap from sticking to food . NOT FOR USE WHILE BAKING only for storing in refrigerator. PET-G recommended
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
he second drawer divided into two parts Cassette L230 l75 H50
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
I had bad results (too tight & too small joints) with the other one's tiles grid… made my design. Easily snaps together with big L-shaped joints to grow the board in any direction as necessary. It helps when the board has to be shifted if…
Do you want to sell prints of my designs, get all my designs for $8, or just support me? Check my patreon page: https://patreon.com/bigovereasy https://www.instagram.com/kuleshow/ No supports, PLA recomended. I applied silicone grease…
This unit is to replace some of the stock MMU3 buffer while using the new cassette system. I have included a bracket to hang the buffer assembly from the back wall of the enclosure but it may not allow the proper clearances as I have not…
Holds two rolls of standard cellophane tape (aka Scotch tape) in an oversized or near 1:1 retro cassette. Side opening help keep track of how much is left on the primary and spare rolls. Print in your favorite colors and customize the…
PTFE tube fitting (Collet) for the MMU3 Cassette assembly, i went into upgrading my MMU2s to MMU3, upgraded from official printed parts, had almost everything in my inventory except for the collets, searched online stores but could not…
Remix of the great, compact filament buffer by @Paul_75970 that makes it compatible with the MMU3 R4 cassettes (Version B). Since I also wanted to use the remix of R4 cassettes , I couldn't use @mikedmor remix which squishes the…
Stand to hold your currently playing piece of music. Holds vinyl records (7" or 12"), CDs, and cassettes. The stand has notches for each to fit in and be held at the perfect angle. The now playing sign needs to be printed separately with…
After building a cassette tape delay, I wanted to try my hand at designing a tape loop that was aesthetically similar to certain vintage analog tape delay machines. Being that this tape loop doesn't require additional rollers to keep the…
Inserts to store / display loose gameboy, gameboy color, gameboy advanced games in a cassette case. Print however you like. Cassette cases will need to be modified. Just use snips to cut out the posts in the middle and the support fins on…
This is a cassette which can make polaroid spectra system to use the 600/itype/sx-70 films here's the assemble tutorial link https://youtu.be/32-6VSvLuo0 ****WARNING: WELDING PROCESS MAY HURT YOU !!! BE CAREFUL !!! **** AND HERE IS THE…
A two piece card holding wallet in the style of those old classic cassette tape cases. Open and close the case and feel that pre-2000's nostalgia. Print a single base and select either the regular lid or “PRUSA” styled lid piece. No glue,…
V1, still in progress to fit perfectly the vial, but it works :) Designed for Néfopam (acupan) 2mL vial, others types will come later this sample was printed in PLA with a random small 3D printer, with poor calibration as you can see, but…
Simple holder for Shimano cassettes with the lockring. Three versions are available: 11 speed version Fits road 11 and 12 speed cassettes Any cassette can fit on this version, but anything that's not 11 or 12 speed road will have a gap…
Remix of the print-in-place wallet by MakerVerse Designs together with the "Wallette" by ANOROC. Please also check out their successful original designs. The Cassette Wallet is put together with a print-in-place main part and added…
This cassette rack can hold 12 standard tapes. It was designed with a focus on minimizing material usage without compromising structural integrity. It has 2 mounting holes for 3mm tapered wood screws, so it can be put on a wall, inside of…
Space-optimized the original thing ( Carcassonne Boxes by conlan89 - Thingiverse ) to fit more of these boxes in the box of the base game. Every box is designed to have the space needed by the parts + 3mm clearance. Also added some more…
Created some scoring flags for carcassonne meeples. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: DasFilament PETG/PLA Various Notes: Print with 1 perimeter to…
This is a digital 3D printable model of the blaster from Star Wars The download contains pieces of the blaster ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the…
Parameterizable Version of Picassos famous Dachshund. Just scale it as you want! Have fun with it.
A little model I put together, inspired by the Netflix show and book '13 Reasons Why'. Added an updated .stl with a hole for a keyring Thanks for lookiing Print Settings Printer: Flashforge Finder Rafts: No Supports: No Resolution: 0.14…
This is a cassette for the Minox (and others that use the same cassette) cameras. Print instructions It requires a 0.25 or smaller nozzle at .10mm DETAIL setting and thin wall detection.
This is an audio cassette organizer with a dispensing mechanism (tape delivery mechanism?) inspired by the ones in Kalmar Designs organizers. The inspiration to make it (and to make it modular) came from this great project on Thingiverse.…
Based on measurements from a Maxell cassette shell. This print can be used in a standard cassette deck, walkman, and/or boombox. For best results, use Maxell cassette parts. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Yes…
UPDATED 2025-05-12: I was cleaning my bicycle's cassette and pushed a little too hard, and near the tip of the tool, two teeth in from the tip, the tool broke and bent up. So, I redesigned these to have a little more material between the…
My remix of https://www.printables.com/cs/model/29030-customizable-board-game-carcassonne-tile-grids Thinner - low material, still stable, faster print.
I lived through those times when to record songs from the radio the only way was to use cassette tapes. And so I wanted to create the cassette keychain A little bit of the 1980s in a cutting-edge industry like 3D printing NOTES This…
Its a cassette, but you print it. Not much practical use outside perhaps for artists or tape loop creators wanting to experiment with custom shells. The two parts of each half are glued together with superglue, see video for more details.…
I designed this as a life counter for Magic: the Gathering. It's got two 10-digit dials so it'll work anywhere you want to track values between 00 and 99. Print instructions Printing is straight forward. The front plate will need to be…
This is a box insert for the white Carcassonne Big Box released in 2021 (sometimes called Big Box 2022, the White Big Box, Big Box 7, or Big Box v3.0). The main feature is the meeple storage, which fits all the meeples of each colour into…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a cassette tape case,…
Do you want to sell prints of my designs, get all my designs for $8, or just support me? Check my patreon page: https://patreon.com/bigovereasy update 14 feb 2023 ------ Cassette_whole(increased clearance).stl This version is relevant for…
This is a simple part sized to go onto a Shimano-type freehub body underneath a 9sp cassette. The intended thickness is 1.85mm and the model includes a single tooth to engage the splines. I can create other versions of this if desired -…
One day after work I got invited to a friend's house for a dinner and games night. It was then, that I discovered the Carcassonne tile game. At first, it seemed a lot like dominoes. However, it was hidden and not seen at first sight the…
UPDATE 2025-03-11: A little Disclamer In case that is not already obvious to you – do NOT try to use this tool with significant force or the layers will sheer off. It will not withstand significant force unless you print it our of metal…
Il s'agit d'une pièce qui semble casser régulièrement sur les C4 Picasso. Il s'agit de l'engrenage partie haute de la pièce qui ouvre et ferme les volets pour la circulation de l'air chaud ou froid. Il existe une version sur Thingiverse,…
Holder for this model: https://www.printables.com/model/107941-karakcarcassone-tiles-grid Height is for 11pcs of grid. It is a minimalist holder for tile grid. I printed with PLA, 0.4mm nozzle, 0.2mm layer height.
This tool is used to clean between the chainrings in the rear cassette in a multi gear bike. it is thin enough to clean 9, 10, 11 or 12 speed cassettes. I mostly use this after mountain biking sessions where debris like grass will get…
I modeled the audio cassette tape at half size for the Printables swatch contest . This is fantastic model to show off your filament because your going to see a recognizable and very tangible thing. There is a very subtle bridging inside…
