173 models
peg remixed to hold posters etc… Hookbit almost everywhere! lite version weighting only 3 grams available here: https://www.printables.com/model/1395752-v2-lite-of-noticeboard-extension-hook-only-3-grams
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
This is the Icon of Facebook Logo. The model size is 100x100x20 mm you can scale at whatever you want! It's only the design, waiting for printing it, use your desired printing settings. There are 3 files for diferent post printing…
Altough I CNC milled this part from aluminum, it might be useful or even work when 3D printed. Re-used the original mounting bracket and screws of the hoverboard chassis. Used the hub motors for a robot project in combination with VESC…
A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…
This is a simple, standalone enclosure designed for the RaceBox Micro. It is powered by a single 18650 battery cell, with charging and power management handled by a module like the one found here . Key Features: • LED Visibility: A hole…
This keychain features an embedded NFC tag that connects to any URL you program it to. At layer, there is a print pause where you need to insert the NFC tag before continuing the print. The recess is designed for tags that are 25mm in…
Designed for generic 5.8L ricebox with bottom size 195x97mm. Combined dessicant container and spool holder, and fully printable with no need for any other hardware. Just print and use. Despite the shrinkage of the material, it is better…
No Support needed Recommended Print Settings Material: PLA or PLA+ Nozzle: 0.4 mm Layer Height: 0.2 mm Wall Line Count: 2–3 Infill: 10–15% (Gyroid or Grid)
A simple mount to stick on flat surfaces like a car dashboard. The RaceBox Micro slides into the mount with a snug friction fit. This is designed for the clear case that is provided with Kickstarter release of the RaceBox. Should print…
The IP5328P can be installed facing up or upside down (see "ud" in the filename), which makes it slightly smaller. The version with the IP5328P facing upwards is easier to install overall, but please note the picture showing the cable…
For all of you who have been put in Facebook jail or know a few who have, here is a way to celebrate. Nothing special. Just PLA with a couple of color changes on Prusa i3.
Funny Sign - "I dont know if facebook has ever caused the lame to walk, But it sure has caused the Dumb to Speak!!"- dual colour design, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection…
Originally posted here http://reddit.com/r/Art/comments/ekurqd/we_respect_your_privacy_3d_print_myself_2020/ By reddit.com/u/musketon Category: Sculptures
Small floater for fishing bait Recommended PLA - No more than 5% infill to ensure it floats
Storage for damage counters, coins and markers, the size allows it to be stored inside any 100-card deckbox. For assembly, a minimum of x8 4mm * 3mm magnets are needed, 4 for the lid and 4 for the base, for better grip place all x12…
4mm base and 0.8 color change (0.2 layers = 4 layers) Cut Down if need be Facebook1: 35mm x 27mm Facebook2: 35mm x 27mm 6mm Keyring hole
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Hi all, in my lab rutine I use my eppendorfs all the time and ofc it has to be kept on ice. Problem arise as the ice starts melting all the eppendorfs starts floating around. Pretty anoying. So to keep it in place and still on ice I made…
My Kludd hardware started chipping after many years of use, so I mocked up and printed an exact duplicate for the original Ikea Kludd hardware. I recommend printing this with PLA+ or better, and using the 0.20mm Strength option in Prusa…
A small design to test the tolerances of the printer. If you like to, check out my other designs too!
A remix from the Pokeball Planter by Lapwing_3D_Prints ( https://www.thingiverse.com/thing:513 ) to with a screw on lid common to diceboxes. Throw the lid into Tinkercad and place some of Pokémon sculptures by either Printed Obsession (…
I found a pin that said Facebook Jail Veteran and immediately thought of my mom. I whipped this award up on Tinkercad for her. I was laughing my butt off while I was making this. I know she's going to get a big kick out of it on Christmas…
Saucebox – a cute (and more organized!) way to hold your spare tacobell sauce packets. This design fits about 10x packets.
Here is the JuiceBox 2.0, it now has a USB C & A buck converter in it. It is still 1 PowerPole input and 2 PowerPole output. Here is the link to the buck converter used: https://www.amazon.com/dp/B09D98799T I printed mine in Orange ASA to…
Simply modeled at Tinkercad
Držák na zeď pro vysavač Niceboy ion Hurricane H7 - tisk pet-g výplň 40%
My hands where practically dripping with free time this summer so I made a customizable Dice Box. This model lets you turn on or off the pen slot, figure slot and eraser slot. You can also choose how many of the slots you want and what…
This bookmark is easily printable, uses very few filament and takes around 10-15 minutes to be printed.
Facebook logo, no supports. Scale it as you want!
Get the STLs here: https://cults3d.com/:2176763 Very fast RC Mono Race boat. Fully 3d printed. Easy to print, easy to assemble. A 3d printable Propeller is also included. The boat handles quite agile. It has self-rightening in case you…
I stuck two sauce-boxes together. Here you go. Have at it. Two sauceboxes for the price of one. The price is free so it's really the same price, but that's not important right now. Download it. Print one for you, one for a friend, and one…
Facebook jail ornament for Christmas trees. You will need an itsy bitsy tiny drop of epoxy glue to hold the three parts together (unless you print them as one using the MMU2S).
Dicebox to hold your Vampire the Masquerade, Hunter the Reckoning, or Werewolf the Apocalypse dice. If the dice are at most 23mm from tip to tip, they should fit. Printing this shouldn't require support, as even the bridging near the…
I didn't like mounting the camera on handlebars since it was uncomfortably shakey and I tend to do quite a lot of “zigzagging” when going slow which was just bad to watch. The only other place where I could mount the camera was the frame…
Boat Stand for the X7 RC Raceboat Check it out at: https://www.printables.com/model/1147679-x7-rc-raceboat Video of the boat in Action: I made a detailed build guide video, that you can find here: https://youtu.be/9DYU-AvqrMI
Facebook Messenger logo in 3D. 5mm high.
facebook like scratcher with telescopic handle
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
This is a container, and cover, to store one stash of 15 Looney Labs Icehouse pyramids. Pictured with 3d printed pyramids, but fits normal injection-molded ones just as well. You need one “icebox” and one “icebox-lid” per stash (assuming…
Ich habe 3x40 mm Stifte genommen zum Sichern, einfach nach dem Hereinstecken leicht herunterziehen und es hält. Zum Herausnehmen und tauschen einfach rauf drücken, Stifte raus und wieder einhängen, und sichern. Gedruckt mit Carbon PLA…
Stojánek je určen pro nabíjení a odkládání hodinek Niceboy. Ve spodní části je prostor pro krabičku se sluchátky Niceboy.
Print from some durable material, I used PETG+CF. Layer height 0.15mm is fine. Use some small screws (M1.8x4). Broken headphones does not have much contact space for fixing, so together with screws use some glue. Apply some clamp before…
A perfect expandable dice vault for the dice goblins who still want to keep their dice neatly organized. The center holes together with the ramp in the bottom part make up a dice tower for rolling. The bottom is also taller than the other…
Now in version 1.1. the box is more wide, then box can be in row next to itself. print setup: 0.2 layer hight, PLA
I have measured the size and button location by hand, so it might be slightly off. If you have an idea to upgrade the model, just let me know. Printing The design expects printing “front face down”. The orientation of STL is already…
Super simple hinge I made to replace the broken one on my Cruzin Cooler scooter, same hinge as most Coleman and other coolers also. Print from TPU or other very flexible material.
Hi All! I made an enclosure for the Racebox Micro. The main appeal to me about the Racebox Micro is its compact size however I was really disatisfied with all the available cases that included housing for a Li-po battery as they were all…
Holds a juice box ~40x48mm, common size in Sweden (probably not just here). Good snug fit. Holds it in really well, even upside down. Edit: v2 - Small changes to handles and outer corners.
Full description and build instructions available on https://github.com/Devnol/Juicebox
Keep your tokens organized during travel and while playing Star Wars Unlimited. Tokens are from metalFABtokens.com. Trays are designed to fit the RNG Dicebox from Heavy Play. Bottom tray can hold two sentinel tokens and either the round…
Threaded. Printed with Prusament PLA Army green. Layer height 0.2 mm. No supports needed. Autodesk Inventor .ipt model included.
Source control- https://github.com/anchit92/ESP32-RaceBox-mini-Emulator #Update on 8/18/2025 -please visit the github link for the up to date stls and code. # Open Source RaceBox Mini Emulator ## Overview This project provides firmware…
The RaceBox Mini is a 3D printed die-cast car carrier with a twist. Open the lid, remove the cars, lock the handle in place, and flip it over to make a ramp for jumping and racing! My three-year-old son provided the inspiration for the…
matička na upevnění de vindat z oryginálního příslušenství
Keep your tokens organized during travel and while playing Star Wars Unlimited. Tokens are from metalFABtokens.com. Trays are designed to fit the RNG Dicebox MAX from Heavy Play. This tray is slightly larger than the non-'Max' box. Bottom…
Dragon curve wall art printed in 10 pieces. It's mounted with double-sided tape, 3D printed clip can be used to stick pieces of paper to the curve. I've printed the pieces with 0 % infill. The clip needs supports to print.
A Hexagon dice box. Fits a standard set of die. used these magnets: https://www.amazon.com/Magnets-Refrigerator-Neodymium-Whiteboard-Kitchen/dp/B0CCXY6WBR/
This is a Facebolt meant to work with Metal Fight Beyblades. It's pretty accurate with some removed holes to make printing easier. I recommend printing it face-down with no supports, 100% infill and variable layer height enabled, get the…
This model is entirely my own design, but obviously heavily inspired by the original from Thump2010. The model is just a plain, unlabeled box. I added my callsign in the slicer. Main difference is the use of a different buck/boost…
Open the carton, hand it to the child, and in their excitement they squeeze it everywhere! This was designed to solve this exact problem, and neatly makes a portable unit with space for an attached metal straw - much longer lasting than…
Adjusted dimensions and made space to house a single 9 volt battery besides the Racebox Micro (in it's original enclosure). Size of 78.6 x 72.73 x 22.4 mm (which is slightly smaller than the [Racebox Mini S](…
Print in PETG (or other heat-resistant plastic) with the bottom of the bottom and the top of the top on the build plate. The top will need support material under the flats of the back legs and the entirety of the front. Insert 2 M2.5…
Generated from the sourcebook cover, this is a hilarious moment that sums up the world of RIFTS RPG as one skull-topped robot tears the skull head off a giant mega-robot. Has a few flaws but most likely printable.
You can also print it on standard 3d printer with separete models. Filaments: Black -PLA Colorfil White - PLA Colorfil Blue - eSun ePLA Parameters: Support - Yes Layer height - 0.2mm
Uses 4 small Magnets (12mm Diameter) to hold the Lid. I printed it in PETG but you can use PLA or maybe most other plastics too. Orientation: The main part can be printed as-is. Please rotate the lid to lie with the flat side on the bed.
Wider version of https://www.printables.com/model/891659-juicebox-holder Changelog: 2024-08-07 - Redesigned handles
I'd be surprised if anyone downloads this one :D Takes 8x3mm magnets.
A keychain to hold your two favourite dice, so you can always play the games you enjoy wherever you are. Uses vasemode. If using PLA, the cord between the top and bottom might break. If so, cut it off, it's just to keep the both parts…
In two sizes, for rats and small mice. En dos tamaños, para ratas y pequeños ratones.
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl 3 sizes ! 16, 19 & 22mm
Držák kamery Niceboy Vega 5.
Niceboy hive pins safety case I use this gadget for my headphones when I put them in a bag because I don't think they are safe in there. There is a small hole on the bottom side of the case for pulling out. I wanted to cut of the edges…
This part is designed and optimized for ASA printing with a 0.6mm nozzle. This is a redesign I made for mounting the RaceBox Mini S to the outside of my car using the Ansix Auto suction cup mount (which is just a generic suction cup mount…
i designed this to go in our shop on the counter to get people to find us on facebook to help grow social media following.
Do you have that someone that is always in trouble with facebook and always got some sort of ban why not print them a facebook jail tag Scale to suit you. Note: If you wish to sell my design please consider joining my Patreon for $10 a…
Wall hanger for hairdryer Niceboy ion, easy printing, hold on doublesided tape, cable is concealed under.
This application is to be used outdoors. ABS and ASA are best for heat resistance, however ASA also provides UV protection. All parts can be printed with the wide face down and without supports. There are 2 versions of the Enclosure; one…
A replacement part for the Niceboy Hive headphone's folding mechanism.
This box has been design to hold a full set of dice plus an extra D20 for when the first betrays you! designed for 5mm diameter neodenium magnets in both lid and box. Will be printing this over the next few days and will add any tips…
agitador de cebo para maquina agricola aplicadora por voleo. Esta pieza cumpla la funcion de mezclar el producto antes de llegar a la boquilla para evitar atascos y grumos. Este modelo se imprime con el vastago donde encastra el motor…
Printing Instructions: Material: PLA Infill: 100% Layer Height: 0.2mm Supports: No Rafts: No Brim: No Color change at 1 mm or 6 layers. Slovak version. Happy printing!
Spice box to hold your spices. I have added two versions. In First version, the box itself is divided into sections. In second version, you have the compartments separately as shown in render. A lip is also included that can be used to…
You can cut a piece of clear plastic from food packaging and superglue it on the underside of the lid to seal the holes for both the LED window and GPS window.
Stojan s poutkem na přenášení pro přenosný reproduktor Niceboy RAZE 3 Radion , tisk minimálně 3 perimetry , vyplň dle potřeby ( honeycomb vypadá dobře v kombinaci bez horní a spodní vrstvy )
Like to print 2!, 1 for you and 1 to gift ;) I use a 10mm electric PCV duct Perimeters: 3 Infill: 3% Supports: No Layer Height: 0.3mm Material: PLA or PETG Solid layers: Top 6, bottom 3
Printing Instructions: Material: PLA Infill: 100% Layer Height: 0.2mm Supports: No Rafts: No Brim: No Color change at 1 mm or 6 layers. English version. Happy printing!
You will need 2 pairs of M3 bolt and threaded insert. I believe you can actually get away with a single bolt, but 2 is rock solid. Mine is printed in PETG and isn't going anywhere. I believe PLA should do the job as well. Multimaterial…
I thought I could save a few bucks on a RaceBox by printing my own housing and sure enough, I was able to. This cost me about $140, $60 cheaper than the RaceBox Mini. The box has space for a little USB-C charger board, an 18350 battery,…
Warning : Assembly requires basic soldering and electrical skills. Features: Size of 78 x 63 x 24 mm (which is smaller than the [Racebox Mini S]( https://www.racebox.pro/products/racebox-mini-s ) at 82 x 72 x 25 mm) Houses two 16340…
Made a holder to hold my Juicebox charger with the Tesla charge adaptor connected to it so I can hang it from the wall without removing the Tesla adaptor. Recommended 0.2mm layer, 6 walls, 25% infill, PETG
