Counting matching models…
Strange Attractor Character Base / Bonus Sewn Chaos Experimenting with using Strange Attractor Generators to create bases. Thew in the Sewn Chaos for something to demonstrate a use case scenario.
Multicolour keychain remix of the Blades of Chaos by Thinkibot on Thingiverse The 3mf is compatible with Bambu Studio. There's a bloody and non-bloody version inside the 3mf. Filaments used: eSUN PLA+: Fire Engine Red, Black eSUN silk…
Painted by Sarah Wade These swords are replicas of the sword wielded by Kratos from god of war. They print in 7 part and has a hole for a 5mm rod to help them align and makes the swords strong. All the detail, like the cracks is actual…
General This gives Lucky 13 the power of the God of War. Since there is a chain attached at the end of the blades, you assemble the pieces a little bit on Lucky 13's hands. It's simple enough to slide the blade on the top of the hand, and…
BE SURE TO SET CORRECT Z HEIGHT IF USING SEPERATE ENDSTOP. I RECOMMEND JUST USING THE TAP AS THE Z ENDSTOP TO PREVENT INCORRECT Z HEIGHT SETTINGS.…
Fourth set of Sonic figures based on Dr. Eggman and other Sonic villians. Set includes · Modern Eggman · Metal Sonic · Chaos · E102-Gamma (Still Painting, will update when done) · Infinite (Both with the blocks as a base and Infinite and…
So I made some changes to the original model. I modeled new antennas, a new trunk, I also modified the head, body and abdomen so that there are 2 colors. I have reduced the thickness of the wings by half so that they are lighter and allow…
EN Project under construction . The basic idea behind this printer is the template from MAQUINA with the PrusaBox project. I took that up and made the ChaosBox out of it. Everything he had drawn was made printable and public. The whole…
For all Warhammer 40k players who want to carry around their CSM Combat Patrol! This is a small board that holds all 10 Chaos Space Marines, 5 Havocs, the Dark Apostle and Disciples, and Hellbrute. At worst you may have to print it at…
Holder for Arkham Horror "Chaos Tokens". Prevents the cardboard tokens from sticking together in the bag while being a bit smaller than the coin collectors that many folks use. I added some knurling round the outside because I fiuigured…
Printed with standard Voron settings: Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill percentage: 40% Infill type: grid, gyroid, honeycomb, triangle, or cubic Wall count: 4 Solid top/bottom layers: 5 Supports: NONE
A step in the right direction to becoming “The Ultimate Lifeform”
Iconic chaotic antiheroine with twin pigtails and bat, inspired by the DC universe.
Picture and title says it all!
The model is slightly longer than the real Blades of Chaos, with the model coming in at ~28 in Just like my previous Draupnir Spear, this model is also fully 3D printed and involves threads in the handle, and the blade is glued with the…
Warning before impression : the model of sonic and chaos emerald are in the same proportion. In the slicer or app for printing change the scale of the model at the same. PS : the model are very small.
Here's my proxy model for the Gloomhaven: Jaws of the Lion Chaos Demon! This model was a lot of fun to make and a lot of work! In the end, it's a crazy chaotic mess of spikes and tentacles... so I'm pretty happy with the result =) I…
Gridfinity Cups with a Voronoi chaos pattern cut out of the walls, all sizes 999 models. Voronoi patterns are generated using points on a 2d plane. To generate the chaos pattern a fixed number of points are placed randomly on the plane.…
A fun, dynamic and thought provoking physics demonstration to visualize chaos and unpredictability. Even today, it is still not possible to calculate and predict movement of the two pendulums. Model is fun to play with since it…
Voron CHAOTICLAB CNC TAP endstop X EXTENDER Arm for PCB Endstop Additional material: Threaded Insert M2 dia 3,6mm, height 4mm M2x6 SHCS screw Insert the screw from the front into the lower oval hole in the cnc tap, mount the extension…
There was nothing included with Chaoticlab's CNC Voron Tap V2 to trigger the X-endstop PCB included with the LDO build, so i made one. It can be mounted with the same screws to mount a endstop switch on the included bracket. I printed…
A chaos orb from the game Path of Exile, I took the original head model, duplicated and transformed it into place. The model is split to two so you can print it without supports and glue it after.
Adapter to securely mount the v8 Dragon Burner to the Chaoticlab CNC Tap for Voron 2.4/Trident. The CNC tap is fairly tall compared to the Dragon Burner. You may need a taller extruder to clear it. I'm using a modified Wristwatch G2…
Its a simplified version of the Blades of Chaos from God of War Ragnarok game for the popular dummy 13 toy. Printing at 150% is recommended for enhanced handle durability. I printed it in two colors with a single filament change to…
This is a paddle designed for the Choatic Labz V2 CNC TAP when being used on an LDO based kit or similar Voron V2.4 etc… Print face down, no supports, 4 perimeter walls, 5 top and bottom layers with 40% infill (Voron PIF perameters).
Weil ich das Projekt unbeabsichigt gelöscht hatte, mußte ich es gerade alles noch einmal neu machen. Entschuldigung dafür. Dadurch fällt leider das bisherige Update Log weg. DIESES PROJEKT IST NOCH IM AUFBAU UND ES SOLLTE MIT DEM BAU NOCH…
A 3D model of the Blades of Chaos from God of War. Blades are perfect for cosplay or display purposes.
I was having issues with QGL failing sometimes with the original BTT mount that attached the Eddy Duo to the Voron Tap. This change fixed it for me and may help someone else. It prints quickly so is easy to try out. I moved the eddy…
I got myself a Voron CNC TAP from Chaoticlab and i saw that you need to put the X endstop on the TAP itself, but i have PCB for my X/Y endstops so i modeld something up quick and tought to share it here as someone may have the same…
Update 05.06.2025 I changed my hotend to a Rapido Ace, which is the shorter HF Version. So I had to modifiy the mount for it. I designed shorter version which has to be used with my modified BTT Slim Case…
An easy to print chaos pendulum. The chaos pendulum is fully 3d printed. You have to print the nut twice.
Been searching for solutions to pimp up my chaos bag for a while, and i'm not a fan of the coin capsules everyone else is using, so after stumbling upon something similiar over etsy i thought about modeling my own version. This is a token…
The STL file only contains one piece, which you need to print twice. The octahedral chamber inside has 6 vertices, and so causes the ball only to land on one of 6 “sides” when a weight/ball bearing is added inside! If you want, you can…
I used it to slide the carriage block of the MGN7 linear rail for cleaning and lubrication without losing any beads. In my particular case, I used it on the Chaoticlabs Voron Tab V2, but it should work on any MGN7 rail. There is a stop at…
🌀 Unleash the wild, reality-warping fury of the Chaos Dragon Bust! A creature born from pure disorder and swirling cosmic madness, this dragon radiates unpredictable power. With twisting, flame-like horns, jagged overlapping plates, and…
This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…
Info: just a fun simple hexa tile, but with a road on it, which can be random even when this is only from a single tile contains also bridges Print info: 0.1mm layers for better road bridging
Is that bleating in the dark woods a goat or two, or is it a vicious Beastman that is coming to sow chaos and destruction in the village? nonPareil institute is committed to building better futures for adults with autism through technical…
I really wanted to the use the extra Chaotic Lab CNC Tap V2 I had kicking around, but couldn't find a good way to adapt the AntHead to this carriage. I found the original model which somewhat worked, but there were areas that clashed with…
you will need two classic pins to assemble. put them into the holes and glue them with superglue on the side without the cap. than glue the whole thing on the pedestal. .I printed it without any rafts or supports with 15% infill and with…
Here's my model for the Frosthaven Boss, the Lord of Chaos! I made it as self-supporting as possible, but there's still several outstretched limbs that're gonna need supports. Fortunately, none of the “interior” of the model has overhangs…
Forged in ancient times (or possibly last Tuesday), this dragon-etched demon mask holds the spirit of a warrior… who occasionally forgets why he walked into a room. Channel your inner guardian beast or just freak out your mailman — both…
This remix is a pre-supported version for resin printing of the original model. Supports were created manually in Lychee slicer and successfully test-printed. Post-Printing "To remove the supports, use your wire cutters to clip them off…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Sonic inspired, Dark Chao, Tabletop DnD miniature with or without 25mm medium base which can be used for DnD and…
I made this because my cat grew bored of predictable balls and needed something more stimulating. This ball rolls in unpredicatble ways and rattles. My cat really liked it! You need to pause the print to place the bearing inside. This…
Marks of Chaos tokens to easily identify units and their allegiance. One file for each God: Khorne, Nurgle, Slaanesh and Tzeentch The logo can be printed with a different color as illustrated in the main image. Everything was printed with…
This fun and quirky pen holder combines the charm of the iconic Labubu with everyday functionality. If you're tired of boring, plain desk organizers, this design will add a dash of mischievous humor to your space. It's perfect for holding…
“In the mist of chaos, there is also opportunity” - Sun Tzu In the chaotic world of 3D printing where things can sometimes appear to be random or out of place, we, the makers & designers, have the job to still manage to see through all…
Made a blade of chaos remix for this amazing fidget based on model https://www.thingiverse.com/thing:754893 by Thinkibot
Insert for Chaos expansion for the game Karak 2 - you can exchange it for the figure holder in my original insert - here is the link: https://www.printables.com/model/1316316-karak-2-imperium-insert Insert for all ingame expansions here:…
EURORACK Blank Panel │3U – From 2 to 20 HP │ "Circuit Chaos" Best to print with a 0.4mm nozzle, layer height 0.2mm or smaller. The “circuit chaos” is made of 0.5 and 1mm pipes so technically it is possible to do 2 colour changes, I think…
modified for 3mm of extra clearence and mantaining same printing orentation
just added a extra cutout for revo voron. the metal bracket that guide the cables was getting in the way and to just make it easier I made a extra cutout for it.
Assembly: Be sure to fully insert the 2 heat set inserts from the back. They should be recessed into the part a few mm before bottoming out. Place 2 M3 FHCS in the lower mounting holes of adapter (leave hanging in place) Attach to CL Tap…
Chaos Lord from Ice Age. I filled out the lower body with armor heavily inspired by Skyrim's Dragonbone armor. I added a second dynamic pose because the pose in the art seems pretty static If you want to help me keep making free models or…
A mounting plate to allow the chaotic lab cnc tap to bolt to the dragonburner v8 tool head
I noticed a unused sliding lock at the base of the magazine. Maybe it was intended for a speedloader, but Zuru but never released to the market. So I made my own speedloader. I printed this on my modified Ender 3 v2 with the following…
Cartographer/Beacon Probe Mount for Rapido UHF for Voron CNC/CL Tap, XOL2 Toolhead
Remake this wonderful miniature to Tiny Style, proportions based on Dragon Forest Skeleton. Small body, big head, total fun :) *This is made on my 22.5mm multi-purpose scale with octogonal bases [crazy right ?] Quiet wild colt, there is a…
Here are some tokens I made to act as “Defiled” tokens. The logo can be printed with a different color as illustrated in the main image. Everything was printed with the Prusa Mini+ using Fillamentum PLA. Works fine with a 0.25mm setting…
Saw this type of double pendulum on IMGUR or somewhere, recreated the idea here. Giving the bar a spin or holding the bar to the side and giving the ring a spin seem to be the common ways to start. Uses two 608 bearings but you can add…
This is a two part design based on coin capsules and is designed to enclose chaos tokens from Arkham Horror the card game. The inner diameter is 25.5mm to allow the token to be inserted/removed easily. The viewing hole diameter is 22mm.…
Note that it works better if some sort of transparent plastic screen is attached to the front. Funciona mejor si se coloca algún tipo de pantalla de plástico transparente en la parte delantera.
Check out this awesome project I made called "Cat Chaos: Jenga Edition"! It's a 3D print of a cat tossing a Jenga tower, and get this—I added a hole in the middle of the tower. Why? Well, it doubles as a dice tower for board games! Cool,…
Source: https://www.models-resource.com/pc_computer/sonicgenerations/model/12771/
Introducing the HexaCable Organizer: The Perfect Solution for Taming Cable Chaos Are you tired of dealing with tangled cables and messy desk spaces? Say goodbye to cable clutter and hello to organized bliss with the HexaCable Organizer.…
**This is an update of my first 3D design for printing, almost finished! Would you pay 4$ for 3 poses of this model (once it's done) with and axe? My name's Juan, I'm from Barcelona, Spain. I'm new into 3D Printing, I have not much…
Es una figura creada desde una imagen con IA
Because I did not find any inserts for Chaos in the Old World board game I decided to make one. My goal was to minimize setup. Each player gets tray with everything he needs: Chaos cards Upgrade cards Followers Corruption token You can…
Need a quick Chaos Plane or Alien World base for your Warhammer 40k, Age of Sigmar, D&D, or any other miniature? Here you go! If you might be looking for enough bases for a whole army be sure to check them out here…
I redesigned the tool to use the stock Hiwin linear rail and secure it with 2x M2 screws when replacing with new setup to eliminate the play from initial Hiwin design. I went with the HoneyBadger MGN7H setup from Fabreeko.
Voroni Chaotic Penholder Hey maker! 👋 I started with a chaotic vase and modified it to apply a Voronoi pattern – the result looks pretty awesome! 😄 Features: Unique chaotic Voronoi design for your desk or workspace. Perfect for holding…
Inside radius is 40 mm (standard objective marker size) Distance from inside radius to outside radius is 1 inch (control range distance) Default height is 0.75mm.
Glued everything together with some 2 components epoxy. Parts you need: Everything needs to be printed once. Except for a few files. 2X Handle decal A and B 12X Silver nub Colors used. 3Djake EcoPLA black 3Djake EcoPLA bronze Fillamentum…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
I asked a friend to model them after the ones found on thingiverse https://www.thingiverse.com/thing:5246882 The designer never responded and they were incomplete :(, so my firned made it complete, yay. Leave a like, make it will help in…
Work in progress - I haven't tried printing this just yet and it is missing some parts! Also, this is my first large model so I'm not sure if the cuts for will work. This is meant as a proxy for a Battlefleet Gothic ship. It's a part…
I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…
I recommend some organic supports.
This is a fun chaotic pendulum toy that demonstrates a multi-pendulum system. This can be set up as either a triple or a double pendulum. Just grab the end, give it a little shake and see the different ways the pendulum moves! Required…
Nice little double pendulum/chaos pendulum fidget spinner. Redrawn from scratch in Fusion 360, based on EG3Dprinting's Double Pendulum Fidget Spinner . Fit is intentionally quite tight to reduce the need of glue, (adjustable) pliers or…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … The hour and minute hands are two complex assemblies of…
This allows the use of half darts in a Xshot Faze Respawn and Chaos Meteor blasters. Attached is the installation guide. Only a screwdriver is needed to complete this mod.
Neues UPDATE vom 17.6.2020 ganz unten lesen! WER BEIM BOHRER ODER GOEDIS BESTELLT, DENKT AN DEN RABAT CODE: ChaosCrew. Ihr könnt dabei ein paar % sparen ;) Wer beim Drucken und zusammen bauen feststellt das das ein oder andere Teil nicht…
A mount for the Fly SB2040 v3 Pro LDC1612 sensor for the Chaotic CNC Tap As Klipper currently doesn't support endstops via Eddy.
This model is based off of its appearance Dark Souls series: Currently fits on 40mm base. I made these models myself - they are hand sculpted from basic shapes in blender software. No custom brushes or library of tricks. yet. You can…
D&D Armoured warrior 2 axes (chaos / dark feel)
This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…
Part designed to fix problem with hinges ears being to short. You will need typical voron sized heat inserts
The inside is a standard schrader valve cap with 0.305-32 threads (8V1 tap). The outer cover is connected via a small amount of material. This lets you screw the cap onto the target tire and then continue tightening to sever the…
You will need a rectangular metal rod (W 3.7mm, H 13mm, L 160ish mm).
Lost my old 45 adapter. Made a bunch of new ones in the Discordian theme. Played a 45 after it was done. Music ensued. Discord 45 RPM Adapter - https://www.thingiverse.com/thing:2813726 Chaos 45 RPM Adapter -…
This is for everyone who uses the Chaoticlabs CNC Tap v2 in combination with the CNC XY Joints from them.
This mod enables a double shear, top bearing motor support for the AB motors specifically for the Chaotic labs CNC kit. It is a remix of the excellent work done by Vitali and adapted for precise fitment on the CL CNC kit. Print settings:…
Crystal Chaos Box The Crystal Chaos Box combines structured randomness with elegance, featuring spiked, layered cubes that give it a unique, chaotic aesthetic. Printed in Prusa’s Galaxy Green filament, it has a shimmering emerald-like…
To War! Drop this chaos (or infernal, or just plain angry) dwarf into a unit of swordsmen or use him as a player character in your D&D, Warhammer Fantasy Roleplay, or other favorite role-playing game. This model comes in supported and…
Simple wall hangers for the printable Chaos blades from God of War
Lost my old 45 adapter. Made a bunch of new ones in the Discordian theme. Played a 45 after it was done. Music ensued. Discord 45 RPM Adapter - https://www.thingiverse.com/thing:2813726 Chaos 45 RPM Adapter Version 2 -…
