Counting matching models…
If you need to secure your precious belongings in a safe place, you found what you were looking for. This safe is secured by a 3 digit combination to prevent anyone from opening it (unless they have a hammer or a heat gun, I mean it's…
Update (7/14/2023) - no glue version! I've re-worked a few things so that everything presses or snaps together, making it a great project to put together with kids. This (mostly-flat) kit card is a bit of a challenge to make but will…
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
Who wouldn’t want to own a car as legendary as the Škoda Octavia? Its appeal is reflected in the more than 7 million units it has sold, and the fourth generation is no exception. Its success is built on a clean, timeless design,…
WARNING: PLEASE READ BEFORE DOWNLOADING This model is not for beginners. There are many interlocking pieces and minor tolerance issues can quickly multiply to create a non-functioning door and/or lock. If you decide to build this, please…
UPDATE V1.1 I added fit testers. Modular drawers with infinite combinations make what you want like pixel art! So be creative and enjoy :D
Print with PLA or PETG all without support. For the Middle number, you have to choose print model to set it. For Main and Cover you can choose the number when you are fixing ring on it. The chosen number is the one where the biggest hole…
My design is inspire by the nice model from Andeker (thingiverse). His design was too long to fit in my toolbox so I remixed it from scratch. The main difference is that the distance between each wrench is shorter. My toolbox drawer is…
This is a basic redesign of a lock that I saw a couple of years ago. It is fully functioning and works like a real lock. To add, when you open the lock the combination is automatically mixed up and doesn't show the correct code. It can…
2022-12-21: I've added a new single blade version which doesn’t require magnets or glue to assemble. 2022-12-21: I've added a new version which only has the page holder and no blades. 2022-12-20: Magnetic bookmark with two blades…
The Alchemist's Cube A combination lock box with mysterious appeal This puzzle box features 4 dials, each with 8 alchemic symbols. Line the correct symbols up to release the core, lifting the core out reveals a hidden compartment, perfect…
A combined desiccant and hygrometer holder that slips into the pour hole of the lid of a plastic dry goods box. I like this approach as it is neater than using baggies. With this setup, I can get internal humidity down to 10-15%.…
This is a working combination padlock design that can be used in place of a standard Master Lock on a locker or whatever. It's relatively strong, but it is plastic it's, so not for high security. UPDATE 8/22/2024: Fixed the body models…
I created two vases in a modern style, which complement each other perfectly when combined. Print: I designed the vase with the hole in the middle so that it is supported at the bottom and no support structure is needed inside. So it…
I needed something to store my gardening tool, so I decided to print my own bracket for my garden shed. The purpose was to be able to screw the bracket against a wall with up to 4 screws if necessary. On the inside there is a hexagon to…
This is a model I designed to showcase the locking mechanism inside a bank vault door. Check out my Youtube video for more info and full assembly instructions.
This is a remix of Combination Safe by ChuTec_Engineering_Solutions ( https://www.thingiverse.com/thing:1939676 ). I liked the idea of the combination lock. But the box itself looked too much as a toy, too much simple. So I created my own…
Discover the magic of 3D printing with the fourth-generation Škoda Superb. The meticulously crafted replica of this iconic car brings its elegance, robust proportions, and dynamic design to your desk. Whether you’re a fan of Škoda cars or…
I designed a combination wrench holder after struggling to find one I liked. This is based on a generic wrench holder that gradually increased in wrench size and depth. I used a 3x5 Gridfinity base for the 13 wrench holder and a 3x4 for…
DESCRIPTION: A five or seven character cryptex that can be used as a small safe / money box and is ideal for storing small valuable items that need the kind of security that only comes form a pocket sized safe made of plastic. Enjoy! KEY…
This wall mount for the FRITZ!Box 5690 Pro is a refined remix designed with enhanced stability and ease of installation in mind. Unlike the original, this model includes a connecting center section to keep the brackets perfectly aligned,…
I combined the Miriam wand model made by voldatrom with the Harry Potter wand made by Matteo_Arcari to make this wand. I liked the handle of the Potter wand but I really liked the twisting branches/twigs of the Miriam wand so I made this…
Support for the top of the Z lead screw and this filament guide on an Ender 3 v2 printer. Remixed from this support for adapt to Ender 3 v2 metrics. It can be used with many knobs designed for the rod of the Z axis as this or this . Print…
Centauri Carbonのノズルの左右一体のコネクター取り外しジグです。 個人的には左右は独立したジグの方が左右一体型よりも使いやすいと感じました。 Elegoo Centauri Carbon Right and Left combined Nozzle connector puller. In my experience, having independent jigs for the left and right connectors offers…
Prints on without supports. Model in the photos was printed in Printed Solid Jessie PLA on a Prusa Mini+ at 0.25 Layer Height and 10% infill.
This is a mini safe / moneybox, approximately the size of a 500ml can. The contents are kept secure by a, four-number, combination lock. Key features: 100% printed parts. Changeable combination. 810,000 possible combinations. Optimized…
I combined different models and added my modifications for the final stand that I personally like to use. The Pillar can be printed without supports in 2 hours and 38 mins. I made it light because it'll be glued to the stand base. The…
This is my new holder for the metal sheets of the Prusa MK3 and Prusa Mini. It can hold up to two sheets each (2xMK3, 2xMini) and fits for the PEI and textured sheets (1.5mm thickness max). Step file is included. Print instructions…
STOP! Check out the improved Combination Padlock v2 design! https://www.printables.com/model/682893-combination-padlock-v2 This is a working combination padlock design that can be used in place of a standard Master Lock on a locker or…
This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-) Integrated supports which will snap away with a tiny bit of force. It used to be a very tight fit at the left…
Simple edit where I removed the walls and made the base more compact for a non-stackable low profile wrench holder that takes less space than the original model. Printed two of each model for the complete wrench set.
This lock works very well and is very strong All you need is one or two nuts and bolts and you can make this secure lock with 216 possible combinations Note: Don't use this for valuable stuff because it is easily broken with a hammer or…
CZ: Nástavby na podvozek traktoru Lego Duplo, které ho přetvoří na kombajn. Podvozek je např. v sadách LEGO® DUPLO® 10982 nebo 10950 Máte na výběr 2 verze: VER 1 = verze s kolíky pro upevnění Duplo postaviček v kabině VER 2 = verze bez…
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
Please give this a like if you enjoy it! It will help me make more of them. This is a replacement for the TPU block that is used to hold the reed in. You can use any material with this spring style block. Tested in PLA and PETG, they both…
I combined the FatBurner cover with the left and right base part to a single model by extending the bases 2 mm to the cover so that they overlap. I needed that because the extruder motor on my KE did not feature the mounting holes to…
This is a simple lock box with 3 digits. Dial in your combination and unlock by pulling the lever to the left. Setting combination Combination cannot be changed after print. But to create your own combination: Open the .blend file with…
This is a version of Ender Dragon by Intentional3D, and its remix by 3D Slash. I've scaled the combined model from Slash3D to print, but many parts went wrong. So Ive redesigned and recalibrated most of the model, nullifying tolerances,…
Combination square holder for Honeycomb Storage Wall and Multiboard. Print upright without supports. Just mirror it in your slicer if you want the ruler part to hang on the other side.
Love the Mini Animal Cell by MosaicManufacturing. Here is a version with all the parts combined into one model, to print with a single color 3d printer. Category: Biology
Contributo ai vari sistemi fanduct VzBot in abbinamento con i sistemi Klicky Probedi Jlas1 e Quickdraw di Annex effettuando delle modifiche in modo che i due sistemi si fondono in un unico componente. I sistemi sono stati testati su…
This is a DXF file that can be used to create (either by milling, cutting, or by using hand tools) a y-carriage compatible with the Prusa Mk3 Mk52 Heated Bed. This carriage will work on the Mk3, as well as the Wanhao Duplicator i3 and i3…
Summary If models are way too small or way too big, try scaling them up/down by multiples of 10 (100% -> 1000% / 100% -> 10%) The models should be working, but this issue has happened before so just in case. Here are files for a helmet…
A parametric MTG card divider with mana symbols. Included STL files have all 32 mana combinations (in the correct official color order) and are ready to print. No supports required, I also printed without build plate adhesion layer. Uses…
I combined the opener part of the PRUSA BOTTLE OPENER and the lid part of dede67's Beer Bottle Lid into a cool new bottle opener that can be used to open and close bottles with crown caps to protect it from stuff like dirt, wasps or flys…
When I saw the Safe box from Hugo this inspired me to do my own Safe (or Lock). This is not a remix. I modeled everything in CAD from the scratch. But i printed Hugo's version before and had a look at it. I recognized parts which he…
Hello I created these models to store my 32 Piece Harbor Freight Pittsburgh wrench set found here. https://www.harborfreight.com/fully-polished-sae-metric-combination-wrench-set-32-piece-68854.html It is designed to print out 2 of each…
The files as is will not load into BambuSlicer. I used IdeaMaker to repair the files and then imported into BambuSlicer to check. After which I exported all the objects to .3mf and .stl formats to use as you will.
V1---is very tight V2---needs double-sided tape This is a MagSafe charging dock that is compatible with iPhone, Apple Watch, and AirPods. Additionally, I have also uploaded a MagSafe charging dock for iPhone and Apple Watch that…
Wall mounted holder for three speed squares and four combination squares. There are two versions and I have only printed V2 file. V1 - Holders three speed squares and four combination squares. The width is setup around a 7" Milwaukee…
Concentric Combination Puzzle Box - Viking Style I have wanted to make a puzzle box that used concentric rings for a long time now, and finally settled on a design that also allows the owner to change the combination at will. Three…
This is a holder keeping your combination squares or rulers nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The model was designed for squares / rulers with a thickness of 2mm. If this is useful to somebody, I can upload…
This is my large designed using Fusion360 on a printed hinge. This will occupied your whole Ender 3V2 bed size. Ensure very good bed leveling. No support needed as all latches and protrusion are designed at 45degree. For those with…
Combined both the top and bottom and added a cut on the other side of the lever, so this can be printed in one part. Added an expanded area for the thumb to be able to slide out the USB side more easily. Print with no supports in the…
Stihl Combi Can accessory box to add to your Stihl combi can sides to hold your file and T-wrench for example. With Step file you can design inside of the accessory to your specific need if you want to do so.
This model was created/remixed to add the option for Storz holder, which can be used for variant B and C. I recommend to print it in PETG with supports (for the screw holes).
All the other combination wrench holders I saw seemed a lot more bulky and/or used more filament than I'd like so I designed this one to be more minimal. Not sure if I really accomplished that, but it turned out as a pretty nice holder…
I created this wrench organizer for my shop. It's simple and holds ALL of my Craftsman Combo Wrenches nicely. Each peg sticks out 25mm and has a 5mm lip. I'd like to remix to make the smaller sized wrench pegs gradually shorter.. one day.…
Hello! This is a modular box design I made as a second iteration to my previous storage box(linked further down). This one is 100% 3d printed. No hardware required. <60 sek preview video: The diffrent boxes and inserts can be configured…
SAE and metric combination wrench holder that attached to a wall with screws. There are two screws in each half so the dovetail between the two pieces is just sort of there for alignment. This is setup to hold multiple of the same size…
I really like @WimV's Mini Warehouse design but I needed shelves every three notches and stability normally provided by horizontal crossbeams. But with the original crossbeams, you can only put shelves every four notches (because you need…
Video: https://youtu.be/bau8SNCgk7A check out our binary carabiners Check out our titanium binary key carabiners Features : Safety cage to keep your keys secure Grade 5 Titanium body Bottle opener 3 sizes Finishes: bead blasted, stone, or…
Tool holder for 26 pieces Combination Spanner Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 135mm W - 49mm H -…
Combinable colourful easter eggs. The parts twist together in multiple different ways to make colourful patterned eggs. Inspired by Jakub Lattenberg's similar design There are 5 parts, each with a thick and thin variation. Sorry about the…
Simple SKADIS peg board holder for a combination square. Printed at 0.2mm layers, 20% infill, no supports.
I am slowly moving into my new toolbox. This model organizes my wrenches from Wera in a neat way. Last photo shows how much grid it actually takes – 6 by 5. Like and post makes if you print this! Thank you. Printing I printed with…
Here's a little love for an underappreciated but iconic character, the Half Life 2 Combine Elites! This ready-to-print helmet comes in multiple parts: -The main helmet -An eyepiece for resin printing -An eyepiece for vacuuforming -Ear…
attach the grills to the base and if needed drill holes to insert brass nuts or screw directly in the base. User materials Base black petg 30% infill Grill grey PLA 100% infill Brass insert nut M2x4x3.5 (4x) M2 screw M2x5
A 12in combination square mount for multiboard. Mounted with 2x 9mm Small Thread, Flat Head, T-bolts. Can be mounted horizontally or vertically.
For use with the original CORE One+ printhead cover right lever. Requires 6.4.0+ firmware. Make sure to flip the vent grille for this to work properly per the CORE One+ update instructions! A drop in replacement for the slide from the…
This is M6 T-Slot nut holder for hexagon and square nut. No support needed. STL files are in 3 versions: hexagon, square and combination of both. Holder fits older 30x30mm aluminium profile. Print instructions Category: 3D Printer Parts…
This is a holder for BAHCO sliding combination squares CS150 and CS300 for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts for a very secure mount. For CS150 there's a single and a double version for one or two combination squares…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
This is a Harry Potter themed strongbox with a programmable 8-digit combination lock. The lid is held firmly shut by the powerful locking charm Colloportus to ensure that only one properly schooled in the art of witchcraft and wizardry…
Skadis compatible panel. Dimensions: 240 mm Wide x 120 mm High x 5 mm Thick. Other panel sizes available at https://www.printables.com/@HighDesertHacker/collections/2757420 Key features: Panels can be joined together to create a larger…
This is another tool holder using Sy's peglock system. The holder and peglock can be printed without supports: The internal overhangs in the rear of the rack required no supports when printed at draft quality (0.32mm layer height) using a…
This is a Bowden tube holder that slides on to hold the the tube in and clips the USB C wire to it before they go to the hotend unit. That I mixed from a tube holder from makerworld w the Bowden Clip from Printables. I printed mine on my…
Also available on Thingiverse .
Wall holder for 15 combination wrenches (6mm to 21mm). Numbers indicate the wrench width, suggested to print in separate color. The Proxxon SlimLine kit fits perfectly. Includes three mounting holes (4mm Spax). I printed with a 0.25mm…
All parts have been specially redesigned with printability in mind. As such, not all components are 1-1 with their original counterparts. Some tolerances might be off depending on your print settings, but this should be solved with a bit…
Update 1 - 08/30/2022 I have modified the discs a bit so that a little tolerance is allowed when entering the combination. Update 2 - 11/05/2022 I added the missing disc_2.stl If you like this model, feel free to check out my others here .
Sort like the Sierra RR cars, but even smaller! The 3D long couplers are for ultra sharp curves, you can use regular 1015 couplers if you like. Category: Hobby
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Choose some contrasting color for better visibility :) For best result while slicing dial, use classical perimeter generator (not Arachne).
So you've invested heavily into the GARDENA Combiystem and want to clean your pool? I've got you covered! I created this by pasting the Combisystem part of https://www.thingiverse.com/thing:3026581 on a Intex-part I designed myself in…
As a special request to Diogo here is all my take regarding these awesome helmets from the Half Life franchise : ) Cheers Jace
I was under the impression that all pool net skimmers have a standard size handle only to find out that mine is too large for the model that I initially printed (and remixed). I needed a much longer tube holder with a larger diameter. The…
no overhang, happy printing!
Voron v2.4 Bowden Tube Holder combined with Trianglelab Filament Runout Sensor mount Sensor: https://www.aliexpress.com/item/32829808063.html
I am converting my Ender 3 v2 to direct drive, using a Micro Swiss NG. I have decided to do a reverse bowden setup with the bowden tube running all the way to my Sunlu S2 filament dryer. Originally, I kept the same wire and bowden tube…
Some of you have too many N64 consoles and display them on a shelf. This thing helps you join the controller with the console for a more secure and tidy setup. Don't be too aggressive when you wrap the cord around the jig. There are…
IKEA SKÅDIS Modular Container – 120 Size Combinations One design. 120 ways to organize. A versatile container designed for the IKEA SKÅDIS pegboard system. Choose the width, depth, and height that best fit your needs — from compact…
A fully working 3D printed combination padlock. Print it, set your code, and it actually locks and unlocks. Set your own combination Nine numbered wheels are included, one for each digit 1-9. Pick any three and print them - the wheels you…
Tool holder for 12 pieces Combination Spanner Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 142mm W - 51,930mm H -…
Hello, so, where did we end up ? As I said before, I saw it when I was Geocaching - it was my first Geocaching ever ! And I think, it's a good idea to hide something and if you want to make some Geocache, it's good idea too - you can make…
Case for the Kweld Battery Welder and KCap power module, This case combines the 2 units into one for easier use and storage; an XT60 connector is used for feeding the supply voltage to the capacitors. [ Filament used in photos is Fusion…
Hi, this is my mini, multi-piece toy harvester-combine that you can assemble and take apart! There are a total of 23 pieces. Assembly is very easy and requires no glue. The wheels and the chopper blade all spin, and the boom arm is able…
holder designed for the Icon 14 piece combo wrench sets( https://www.harborfreight.com/professional-metric-combination-wrench-set-14-piece-64709.html and…
This model includes a rack for two build plates, the tools that came with Creality, and your own supplies such as glue, IPA, USB memory stick etc. You only need 4 pieces of M3x8 (or M3x10) screws to connect this to the side wall of the…
I uploaded two versions in case you wanted to also hold regular small squares. No support necessary.
