293 models
Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
If the door needs do be adjusted, the handles break before the screws damage the frame of the door, so sometimes you need them new. This part does not fit to the original base, because I needed to make the groove bigger then the original,…
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for one variant
Wall-mountable enclosure for the ESP32 six-relay module Kincony K868-A6. A model is included to facilitate further modification. No printing supports needed. Some walls are thinned - they are translucent. Alternatively, they can be easily…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for PETGSource material: PET
This planter should fit on balcony rails with a width of up to 45mms. It comes with 3 options you can combine as you wish: self-watering reservoir planter with water level indicator (TBD) draining planter with drain hole for excess water…
Print approx. €9.07–€11.08 excl. taxPreliminary estimate for one variant
Can help with close balcony window from outside. Printed with support.
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
The 3D Printed Mounting Adapter for Gardena Aquabloom Pump is here to enhance your balcony garden. Specifically designed for 15mm square balcony guardrailings, this downloadable 3D model offers a practical solution for mounting your…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
I designed this to be able to align the AquaBloom towards the sun on the little table. It is printed very stable and heavy to last longer with PETG in outdoor use.
Print approx. €10.53–€12.88 excl. taxPreliminary estimate for PETGSource material: PET
Für unsere Bonsais brauchten wir ein Regal auf dem Balkon. Die Regale sind oval, innen ca. 25 mm tief und haben die Innenmaße 170x130 mm bzw. 190x150 mm. Die Befestigung erfolgt über eine Klemmvorrichtung am Balkongeländer. Das Rohr hat…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
A one-piece holder that lets a Seeed Studio SenseCAP Solar Node P1 (or P1-Pro) live horizontally on a balcony railing instead of a wall or a mast. WHY THIS PART EXISTS The Solar Node P1 is built to be bolted to a wall or clamped to a…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
Stop wasting water on the surface and start nourishing your plants at the source. This innovative root irrigation spike delivers water directly to the root zone, ensuring deep, efficient hydration exactly where your plants need it. Simply…
This handle is thicker than standard handles and has some extra reinforcement ribs on the inner side which makes it unbreakable. Cover for screws is also included. Choose correct orientation (left/right) for your door. For outdoor use I…
Einfach zu druckender Türgriff für die Terrasse aus PETG. Der Lochabstand beträgt 47mm. Griff stehend und mit 15% Infill gedruckt. Klammer auf der Seite liegend mit 0% Infill gedruckt. Easy to print balcony door handle made out of PETG…
I needed a door handle for my balcony door for gluing, because I live for rent and cannot simply screw into the door. I recommend to print version 2, because version 1 has your finger pinched. For gluing I used 25x50mm 3M adhesive pads…
A simple spike strip I made for my balcony handrail, to keep birds from resting and doing their business there. Nothing fancy as such. Dimensions copied from some strips I had purchased too little and ran out of. They came with two-sided…
A mechanised box with 2 "balcony" drawers. The drawers open with a 120º rotation of the lid. Assembly walkthrough on YouTube STL Files • Balcony-Base-1X.stl • Balcony-Top-1X-V2.stl • Balcony-Screw-1X.stl • Balcony-Drawer- 2X .stl ( Print…
Flowerpots/Planters to fit between the rails of our balcony railings. OpenSCAD file is included so you can easily make it fit yours! There are two variants of the pot (measures in mm ): a smaller one that fits between two rails:…
The plastic ornament at the corner of the roof and balcony on LGB wagons is somewhat fragile. This is a direct, printable replacement. Please DON'T print this part in PLA. It will be too brittle to survive a reasonable time. Printing it…
The model has been made only from the picture and the dimensions have been just roughly translated. Printed on a Prusa Mk2 with support Resolution: 0.15 / Infill: 20% Malta_Balcony_1.stl is with a ribbed roof Malta_Balcony_2.stl is…
Update 26th of March Updated the parts to be a single ring without flat parts around the contours of the followers. Otherwise the parts won't fit the output array. Furthermore the single balcony now connects to all three followers instead…
I used the dragon from: http://www.123dapp.com/creature/Gargoyle-Dragon/3355535 and BLENDER for cutting out the pipe. Two versions: for 50mm and 40 mm pipes Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: Yes…
Die ist ein flacher Griff für eine Balkon-/Terrassentür.
Repair your broken balcony door handle. Screw diameter: 4 mm Pitch between screws: 50 mm
This balcony was made for a dollhouse that has a scale of 1:12. I made it with my Crealety K1C. The balcony is 240 mm by 120 mm and 85 mm high. I am also working on a support under the balcony. i have printed the railing upsite down. i…
A simple keychain of a running shoe. Modeled using a picture of the Saucony Ride 15. Try increasing XY Size Compensation (Prusa) or Horizontal Expansion (Cura) to create thicker lines if the logo is too thin. Here is a similar model of an…
I needed a flat door handle for my balcony door to glue. This is designed so that the shutters can still be closed. I have glued it with 3M double-sided adhesive strips with the dimensions 50x25mm.
Replacement balcony door handle Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: Yes Resolution: 0,25 Infill: 25% Category: Replacement Parts
A case for Kincony K868 A16 esp32 board. Mounts to a DIN rail with: https://www.thingiverse.com/thing:1110765 Based on the Herr Braun design on thingiverse: https://www.thingiverse.com/thing:6837967
Eine Halterung die an die Tür geschraubt werden kann um die Tür von außen entspannt zu zu ziehen.
This is a balcony-style thing to hold small items, in my case chalk for a blackboard. The model for the design were baroque style elements at bridges, roofs and balconies around Museumsinsel in Berlin, more specifically: the Inselbrücke.…
Improved version of the previous model. Includes a built-in lock that you can turn to block the balcony door from opening by itself. The holder can be mounted with double-sided tape to the door, so it is rental friendly. Dimensions…
Originally printed on MINI+ in PETG with some supports. I expect that PLA would work fine as well maybe even without support.
OpenForge 2.0 Towne Balcony / Gallery Separate wall tiles for building balcony or gallery railings attached to OpenForge towne wood floor tiles. (File names follow the OpenForge / OpenLOCK naming conventions, low poly tiles can be used…
A simple case for the Kincon KC868-A6, Includes Case Base Case Top Display Spacer Requires M3x5x4.5 inserts
This nice Lidl Playtive Dollhouse XXL comes with front door only. So I have created widows and balcony door which fits perfectly to prepared holes. Hinges are created using small piece of raw 1,75 mm filament. In my case the hinges works…
This holder goes on the outside of your balcony door, so it holds the door shut when you are outside, thus preventing wind from coming inside. You can fasten the holder with screws or double sided tape. The handle part is made out of two…
Dies ist ein Remix eines anderen Balkontürgriffs von Cristian . Ich habe ihn etwas runder gemacht und eine Abdeckung dazu entworfen. Die Maße ansich sind gleich geblieben und dem Bild des Orginals zu entnehmen. --- This is a remix of…
Easy to print handle for a window/balcony door so it can be closed from the outside. Model Info All model files include the handle in its specific height and the screws covers. Make sure to choose “No” on importing the model into your…
Mini Dude Balcony desinged to fit Wekster Mini dues based on Statler and Waldorf Balcony from the Muppets show MINI Dudes shown not included, but can be downloaded below: Mini Bob: https://www.printables.com/model/484808-mini-bob Mini Mad…
Balcony door handle because the old one was broken. Printed from petg or asa. Balkontürgriff da der alte gebrochen war. Gedruckt aus petg oder asa.
Balcony door handle- two versions- one for doublesided tape and one attaches with screws. Category: Household
Introducing the Balcony Rail Planter: the perfect fusion of functionality and elegance for your urban gardening needs. Crafted with precision through cutting-edge 3D printing technology, this innovative planter is designed to bring life…
You broke the Doorhandle but your mother in law is comming for a cake? Just print your new one by yourself .. Sure, it's cheaper to buy a new one, but .. what are we? PRINTER! What do we want? Sitting in the cellar and printing things…
This is the model I practiced to build. It is combined. Print instructions Unassociated tags: LINE friends Category: Animals Summary This is the model I practiced to build. It is combined.
The holes in the back can be used to screw a din rail mount, I've designed it to fit this mount or the ones that you can buy from Aliexpress. This model is heavily inspired by https://www.printables.com/model/1129540-kincony-k868-a16-case…
Description I designed my own lamp for my balcony that is easy to print, assemble, and maintain. The construction uses PLA+ 2.0, PETG, and TPU 95A depending on the part and its purpose. Bambulab .3mf Files vor Bambu Studio with print…
I made it in Fusion 360 for own use, but download it
Note: Header photo shows the provided version on the bottom left, a previous version (not published) is in the top right. Requirements You first need to make sure this pot fits your balcony handrail: Distance between bars: 105mm Size of…
This are endcaps for a balcony railing to prevent wasp building their nest inside the steel tubes. Rectangular Version: Size: 50 mm x 30 mm (outside), 45 mm x 25 mm (inside) It is designed to fit into a 50x30 profile with 2 mm wall…
My settings are provided in the .3mf file or .gcode. The main settings were: 0.4mm nozzle Overture PETG 4 perimeters 0.3mm Layer Height 25%/15% Cubic infill (more dense near load) Print two brackets per build plate (or 3 if you'll do two…
An einigen meiner Balkontüren sind die Griffe altersbedingt abgebrochen. Also habe ich neue gemacht. The handles on some of my balcony doors have broken off due to age. So I made new ones.
Printed with transparent PETG This solution can carry a lot. With a wall thickness of 2 mm and a dimension of 17 mm, it fits on standard cabinets, doors and windows. The length of the hook is 62mm and is 50mm at the bottom on the widest…
Decorative balcony for Skadis, Three different sizes,in the balustrade style Created for my daughter for her Skådis pegboard. Printing is simple : first the bottom part, then attach the handle and insert the hooks. Prusament PLA Sakura…
This is a sliding latch lock designed for securing plastic-metal balcony doors , built as a multi-part assembly: Main sliding body with mounting holes. Internal part with guiding cutouts that allow the latch lever to lock in place.…
Filaments used: Devil Design PLA Black Devil Design PLA Dark Brown Devil Design PLA Brown Devil Design PLA Dark Red Devil Design PLA Dark Gray Devil Design PLA Beige Devil Design PLA Bright Yellow Devil Design PLA Vanilla Devil Design PLA…
This is a replacement part for a BG53 balcony handle. Das ist ein Ersatz für einen BG53 Balkontuergriff. The distance between the two outer screws is ca. 59 mm. Der Lochabstand zwischen den 2 äusseren Schrauben beträgt ca. 59 mm. Print…
Balcony box holder. I don't know how much weight it can hold. PETG best for heavy boxes or use more holder. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG…
While I was building my first Dollhouse I found some leftover pieces of plexiglass laying around. I designed some poles and just like that I got some cute balkony railing for this dollhouse. The poles can be screwed to the dollhouse with…
Jedná se o repliku z Schüco Balkontür-Schnäpper 287893 profil CT70. Na původním díle prasklo jedno rameno a potřeboval vyměnit. Originál moc dlouho nevydržel. Tiskl jsem z PETG. This is a replica of the Schüco Balkontür-Schnäpper 287893…
Works really well. With two of these you can mount umbrellas with a cylindrical main shafts onto your balcony railing. The railing has two have two or more horizontal rectangular bars whichs inside edges line up vertically. Rubber inlets…
Recommended settings: Material: PETG (PLA might not withstand high temperatures on balcony) Layer height: 0.35 mm Infill: 20% Other material: Screws Model files: Fusion 360 model - https://a360.co/3qQXBKM Build Video:
The distance between the centers of the holes is 48.5 mm. The hole is sized for M4 screw.
After the handle for our balcony broke, I decide the just model my own.
Simply balcony flag holder mounting by 3 zipties (4mm) I recomend: 4 walls, min. 20% infill and PET-G or ASA. No support needed.
Zaoblené madlo namodelované podle originalního madla na klasických balkónových dveřích
We have an old style iron staircase, and wanted something simple for pot for the flowers. This is include two pot holders straight 45 degrees And the pot. Printing instructions: Pot - print in vase mode, it is faster and strong enough.…
I printed it with ASA, strong enough for a very heavy balcony windows, but probably I could use somethign beefier aswell. print it on the chamfer, that makes it a lot stronger.
This very flat door handle fits easily between the balcony door and the insect screen. There was already a 4mm ISO thread on my door frame, which is why I'm using the single-screw variant (with washer and flat-head screw). Usually,…
"Custom KinCony A16 DIN Rail Enclosure with LCD Display and Buttons for Home Automation" This custom-designed enclosure is made for the KinCony A16 relay module, a versatile component perfect for controlling various devices in your home…
I used this to replace the balcony flower pot attachments for balcony railings that were lost over the years. Slices well, at least in Cura. The size of the mesh should be 16.8 x 64.3 x 12.2 mm. Print Settings Printer Brand: Snapmaker…
Iconic Movie Moments - Annie Hall - The Balcony Date - 1977
Balcony door stopper for doors without a ventilation mode, or for doors that can be closed or fully opened without leaving a small ventilation gap. For fixing to door frame I used a double-sided sticky tape Printed from PETG on MK4s 4…
Here is a small size balcony pot for urban balconies. It is fixed with wire in the 2 holes provided (diameter 5mm). The bottom is well drained. I did not provide a cup. Voici une balconnière de petit format pour balcon urbain. Elle se…
This needs to be printed in a flexible filament, I designed it for TPU. Unlike many door stops that under the door to stop it's movement this design goes into the corner between door and frame which only opens when the door is open. The…
This Flower box holder is capable of holding a flower box on a thick balcony railing. It is designed that even during a storm, the flower box can only fall onto the balcony (and not onto people walking underneath)
I needed a solution to keep my balcony door open, but also easily release them at will, so I came up with this. The base of the door holder is glued to the floor with a strong, double sided mounting tape (remember to de-grease both…
Sharing this fully 3D printed balcony shelf, it turned out to be very rigid and looks great :) The clamps for the wall have 75mm inside, the design files are attached, but you can also create this basic shape in any 3D design software.…
CROW & BIRD REPELLENT FOR BALCONY RAILINGS Here is a simple solution to get rid of crows and other birds which perch on your balcony railings and wake you up early in the morning with their noisy voices or dirty your balcony with their…
New version uploaded (v10). The model is now more bulky and stiff, but it still fits. Print with supports - change type to organic for best performance and hange “seem” setting to random. Or use 3mf file for printing. I use PETG.
This is a slimline door handle for patios and balcony doors where space is limited due to a fly screen. Its only 8mm thick and very stable. Easy to print, because it lays flat on the bed.
Summary Assisting bracket for mount of parasols on balcony railings using zip ties, which enables stable mounting and reduces the need to turn the parasol. Dimensions Diameter of the pipe: 25,4mm (+- 1 mm) Maximum ziptie width: 6mm fully…
This is a printable scarecrow to keep your newly planted seeds from being devoured by birds. No more flying dino's digging up precious seeds, scare them off with this Dangerface Scarepeller! The scarepeller is effective against most of…
A detailed 3D model of a high-end contemporary residence featuring strong geometric volumes, a prominent upper-floor cantilever frame, and extensive glass openings. The layout includes a covered carport structure, integrated perimeter…
Common leg to keyboard. The dimensions may not suit you, but feel free to contact us and we will try to help you. Please give a HEART for the download! We like to collect them. ;-) PRINT SETTINGS: Total time → 7 min Number of print files…
An inverted clock that runs backwards. The mechanism was bought on aliexpress. To assemble you will need 5x2mm neodymium magnets and double-sided tape. Odwrócony zegar, który chodzi do tyłu. Mechanizm kupiony na aliexpress. Do złożenia…
The design of this table is quite simple. It explains itself. You can print one made either with or without holes to hold drinks. It’s fabiouslous to hold your drink and snacks whilst reading a book there. Just print and lock it in place…
I was having trouble keeping the balcony door closed on windy days as it only locks from the inside, so I designed this simple but robust latch to keep it in place. Depending on what size screws you use you may need to tap bigger holes in…
Simple and easy to print model of handle to balcony door, it's renter friendly, you can use command strips or double sited tape to stick this handle to your door, no need to use screws. Dimensions Height- 7cm Width- 2,5cm Depth - 4cm
Small PV power plants are becoming popular and inexpensive. However, mounts are quite expensive. This is a 3d printed solution which is inexpensive and fits all kind of modules. This mount can be used to hold the panels on a flat surface,…
This is the first design I publish and the second ever made in my life, so every comment and suggestion is welcome! As title says, is a pratical solution i needed to design for myself because i don't have a near place to store my…
Thank you to the original designed for including the STEP files. It made it a lot easier to remix the models. On the left and right are mounting holes for the Cable clamps to secure electrical wiring to the base. The Cable clamps come in…
Outer dimensions are 8Lx4Wx4H inches. Print with base of planter box on build plate, no supports required. If the drainage holes are too aggressive for what your plants need, a paper towel can be placed at the bottom inside the box before…
It might require some sanding in case you have overhang issues. 15% infill Snaps on are pretty solid. Easy to install and remove if needed. Don't forget to either increase the length of the bar or print alternative one.
The original model ( https://www.printables.com/model/113428-balcony-door-handle-with-cover-unbreakable ) had a different hole spacing than what I needed.
I printed it with PLA, 50% infill, 0.2mm layer height. Less infill should be good enough aswell.
Beer holder for hanging on a concrete balcony. It works flawlessly. It can be printed with supports, it is enough to print them only from the mat. They go down easily. If necessary, I can adjust the size of the holder, as every concrete…
I created a balcony gully cleaning shovel with 48mm width. it cleans the balcony rain pipe. for printing, you need to use supports.
![Balcony door handle [Including F360 files]](https://media.printables.com/media/prints/279190/images/2473959_00732632-82d6-4f0d-8d2e-4a5c37cda868/shotcut_00_01_50_551.png)
![Balcony clothespins basket with room for socks and underwear [UNIVERSAL] (Customizable)](https://media.printables.com/media/prints/953672/images/7301122_ada3649f-0429-46c7-9ff1-eb942971f5f5_dc4a6078-76d7-49e8-aa45-3acffcd92e25/img_20240729_071507.jpg)
