Counting matching models…
I'm glad I finished in time for the contest deadline! I designed a vase that not only has a silky smooth appearance but that can also be printed in three different ways, yet still without revealing an obvious seam. The vase is 20cm in…
Hey sneaker fan! Wanna protect your sneaker from creases or keep it brand new? This is the ideal moment for you to download this part and safeguard your baby (sneaker). I designed this model to protect my sneakers from creases. I tested…
The Pico 4 is better in almost anyway than the Quest, it is lighter, better balanced, and has a higher FOV out of the box than I have been able to get with any facial interface for the Quest. The only thing the Quest does better is…
First and foremost: Thanks @ David Kingsman for providing us with such a neat clock model! Myself and everyone else I showed it to really liked this fresh design! Sadly I ran into multiple clearance issues while assembling the parts…
UPDATE 13.12.2022 Added air vents to the gasket, they are designed in a way so its impossible for light to get in. The active cooling on the Pico4 itself is awesome but when the face gasket sits perfectly on your face with the hot air…
This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro. I prefer this “open” design and many others do too. You will have to use a bit of velcro tape and source your own pad. Recommend…
Big thanks and compliments to the original designer! @StoererHauptquartier On my printer the Rotor fused and locked in place. Seems a pretty common issue. This remix opens the clearance by 50%. I printed this on MK4S 0.40 nozzle and 0.10…
Info: I like original vase (thanks @Riskable !) I just wanted larger base area (which is touching the ground) so I increased dynamically this part → increased stability of the vase Size: note that default 100% size is quite small, so I…
This model is compatible with the lego system.
Description Keep your sneakers looking fresh and crease-free! This 3D printable sneaker crease protector is designed to fit inside the toe box of most sneakers, helping to reduce and prevent unwanted creases and wrinkles during everyday…
I had a slight issue printing the original one as the threading would not fit my strain relief so I quickly increased the tolerances and now the PG7 fits well.
Edited cover for the SV06 ACE. The cover is opened up and makes the stock fan a little quieter. I printed in PLA black with 0.4mm nozzle and supports. This is a rework of the original SOVOL SV06 ACE model from SOVOL's github.
I took a liking to this wheel case, and decided I'd correct the primary complaint other people had - the thin walls affecting printability. Print settings are the same as Jacob's original project, I would perhaps suggest using PCTG, as…
Keep Your Filament Tidy – Now Stronger Than Ever (V3) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 3 , featuring thicker walls for enhanced…
Erhöhung für Espresso Tassen, Height increase espresso cups
Here you go a new design if you dont want to buy a garden hose nozzle, quick 3D print with only 47min. Increase the preasure water Cheap Quick Print that takes 47min Note: Please put a hose seal to prevent leaks in the threads section.
This is an improved FOV gasket for the Pico. It significantly enhances your field of view and comfort. I found it superior to both the AMVR and GeekVR versions. While it's based on another design, the original model is arguably the best…
To get a better airflow and also to reduce resonances I created this feet extensions for the Sovol SV08. //Edit: 2025/07/02 Now the feets are stackable. So yo can increase simply the height by Stacking multiple of them an then only one…
This is the exact Prusa i3 MK3S MMU2S extruder idler with one layer added to the part at the top that breaks the filament sensor beam. I modified this piece because I was attempting to pair PETG and a Flex filament. I found that the Flex…
Remix of a good cable clamp but for people with slightly larger hands and need an easier time clipping the item together with one hand. Prints in two parts, snap-fit as easy as the original. Resize as needed.
There is no need for mmu. You can easily print by replacing the color Z layer. Print instructions Layer: 0.2 Nozzle :0.4 Print time 2-3 hours Top fill pattern: Hilbert Curve
You need: Cable_Link_K1_9x15_v14_increased_3mm.stl or Cable_Link_K1_9x15_v14_increased_3mm_increased_pin_0.5.stl - x22 K1_cable_chain_link_with_PTFE_tube_guide_increased_3mm.stl or…
I designed and tested these replaceable parts for the Jiabaile 1/43 drift car. They increase the steering angle and make the car more controllable and suitable for tight race tracks. It’s a bit more consistent regarding the angle of…
This model is compatible with the lego system.
"Kimegami" Origami Crane Base Crease Embosser A set of plates for pre-creasing the crane base onto 70mm square origami paper. Useful for completing one thousand origami cranes . These may be scaled by 107.143% for use with more common…
I kept having issues with the IR Sensor calibration on the MMU2S after the MK3S+ upgrade. To get the sensor to read 1, the holder/chimney had to be pushed all the way to the right and then some. The reading kept fluctuating between 0 and…
The original Split Flap design is a masterpiece of design and engineering. However, I couldn't get my 2x1mm magnet to fit within the inner drum without breaking things. I've increased the bore of the magnet hole to 2.4mm which should be…
I experienced a failure on one of my wheel-end CV housings, where the hex end of the housing which fits in the wheel hex socket got rounded off and wouldn't transmit torque to the wheel any more. After I printed another one, I noticed…
i designed my own tolerance test since all the models that i found use either too much material or time. “push in” tests can't fuse so they aren't realistic enough for print in place models. since the model is relatively tiny, i had to…
I just edited the very good mod by John Doe to accomodate bigger 6x3 magnets (superglue suggested)
I helped my girls at home with new tools/gadgets for their sewing projects.
Simple cash clip that prevents your notes from being creased. Very minimal material is used - perfect for using up the remaining bit of filament Suggested material for printing is PETG although PLA will work just fine. I printed my…
This model is compatible with the lego system.
I don't like the angle of normal mounts when riding a motorcycle/ATV because the camera points too far down and usually only shows the speedometer, which is why I built this one. I printed all of them with PLA, 4+ walls, >30% infill and…
31 Hour long MMU2s Print. Sized to the maximum capacitiy from my MK3S MMU2s Print instructions PLA Used -> Prusament Printing Time Total: 31 Hours Printing Sliced: Quality 0.15mm, 4 cooling moves lowered the heatbed tem. 10 degrees and…
8-18 Update the heat dissipation fan bracket to magnetic fixing, provide 2 4010 fans or 4 2507 fan brackets. 1、The top side has a cooling fan and uses 2 4010 cooling fans 2、The top side does not use the cooling fan, and directly prints 2…
Love the original model https://www.printables.com/model/325995-foldable-ruler-credit-card-size but had trouble printing. The original has 0.2 clearance for the hinge which has worked well for some, but my slicer was trying to print the…
Tool to crease leather. Not as good as a real tool but with a little water, it will do the trick. Has an edge guide and handle that makes it easy to press down with your palm. Fusion 360 file so you can make your own. Let me know if it…
This remix has two different parts. The first is a replacement for the “ mount-arm.stl ” which increases the rearward tilt by 25° to allow for easier touch screen inputs on a desk. The second model is a short 45° mount that allows for…
This is a remix of the satsana mini to add some text and extend the top screw slot to fit my printer. It was originally for ender 3v2. I have it on my ender 3 pro and creasee CS-30 with microswiss and dragonfly bms hotends and it works…
I printed Yaron's belt tensioner but found that the bottom of the belt was rubbing on the lever. I remodelled this part and moved the yoke of the lever closer to the adjusting screw and added a chamfer to the top edge. All other…
This let me print this model with a 0.4 nozzle and rotate the center gyroid. If you are still having trouble, try increasing the Z offset, and/or printing with “Slicing Tolerance” set to “Exclusive.” Model edited in Blender. Sliced in…
I printed it in 0.16 layer height and it seems to work nicely. though not as smooth as the cheapest paper folder, this one costs mere pennies to make
I could never get screws to print right. the threads never fit, or the tolerances were off, so while printing the Tablet and Notebook Stand from @Virus4711 I decided to make my own. Printed on a MK4 with a little extra tolerance for other…
A custom Y Axis motor mount to fix rattling when motor touches back frame. This is a remix, but i forgot where i get original model.
Isolated the four individual traces for each of the four sides plus a center to slot them into. This makes it possible to print much larger (220% size on the Prusa Mini). I also added a center with a fake processor. Numbering is…
I redesigned the left side of Desteiner shotgun to hold the 4 shells. On the left side. The original MMU printed shell broke after a few uses. I made an 2 piece shell design for easy printing and mounting. (It involves glue this time) And…
Following several cooling problems with my Dragon HF hotend, I noticed that with a 4010 fan more air was being blown back than was cooling the hotend, so I increased the thickness slightly to smooth the air flow.
Having a mother who now has to rely on this type of walker for assistance I noticed 1 foot was missing. Worried just not off the floor but also the uneven footing plus glide of walker I modeled this from the one remaining. It does take a…
just a small remix of the original file provided by iflight, just made the walls a bit wider.
Simple feet to increase the space underneath a couch. Perfect for giving robot vacuums the space to drive underneath. Step file included for changing it to your specifications. Don't skip on the infill. This thing has to carry a lot of…
Update 18 Apr 2022: The Y-axis mod suffered significant deformation probably due to heat from its close proximity to the heated bed even with insulation. Suggest to have this printed only in ABS at this point of time. Update 7 Apr 2022:…
Under Desk Phone Holder/Mount/Productivity Increaser. Mount your phone under your desk to avoid looking at notifications to help increase your productivity. Minimize your distractions. Mounts with VB tape/dual sided tape or could also use…
To increase the structural integrity of a cabinet.
Very basic mod to increase airflow, print in petg to be strong enough
IKEA Sundvik Crib - Height Increaser I needed to raise the bed by 60 mm and therefore made this one. It becomes a total of 100 mm where 40 mm is a tight fit around the leg. Print instructions Category: Household Print Settings Printer…
Overview Based on my testing, this is by far the most reliable and user-friendly way to increase the capacity of the nerf rival roundhouse. This is a very easy drop-in modification, that takes around 15–20 minutes to install. Assembly…
A simple, better looking Y tensioner that will allow the bed to travel forward about 10mm - 15mm farther. This is helpful when switching to other extruders that push the nozzle “forward” of the original position. Installation requires two…
If you own a DJI Mavic Mini (1), you might notice a wobbling of the front arms in cold conditions or with strong winds, which can even cause the props to hit the body and crash. This is caused by the low torsion strength of the original…
This is a work-in-progress ! This is a remix of the base wall tile from RostaP's Honeycomb Wall Storage system: https://www.printables.com/model/152592-honeycomb-storage-wall The original model was easy enough to print, but had too tight…
I reverse-engineered the original model and increased the number of holes.
This is a small addon for the eBox Lite to cover up the filament guide hole, which caused a great deal of lost heat and increased humidity for me. Fits with all filament types, however I recommend Polypropylene because it allows for an…
This model is a stronger idler arm for the ProtoXtruder 2.0, with a 1 mm increased gap between the idler and the extruder body! This solves two problems that I have with the original idler arm: The arm warps when heated in a heated…
This is a remix of the awesome phone tripod by LoboCNC. I have added two variations of longer tripod posts. - The 148mm post is 40mm longer than the original. - The 198mm post is 90mm longer than the original (intended for holding the…
To mount David Ds multiboard adaptation for the Prusa Enclosure on only parts of a side the snap fit STEP file provided by David D was remixed to allow increased adjustability. To be of any use you will need parts from the Multiboard for…
I printed the windmill larger but it needed to be more offset in order to not hit the nozzle fan. Used superglue to get the 8x3mm neodymium magnet attached.
My Flexispot standing desk didn't raise to quite the right height for me (I'm 6ft 6) and so I designed and printed these feet to raise the desk a few more cm and to stop it sinking into the carpet quite as much. I have designed them so…
The Crease Vase - model B features a unique cloth-like pattern, simulating the look of gently draped fabric. Designed with parametric modeling, this 3D-printed planter adds a subtle, modern touch to any space. Overall dimensions are:…
Rose Sock Knitting Ruler Slide this ruler into your socks while knitting to get the perfect sized sock every time. Edit 2026-07-31: Added US Women's in addition to the existing EU sizes. Cleaned up the model files a bit. Edit 2026-08-17:…
Increased tolerances for a looser fit.
Abstandhalter für Stofftöpfe gegen Wasseransammlungen im Untersetzer oder um die Höhe nach Bedarf anzupassen. Design für Untersetzer mit Innendurchmesser 210 mm Die Abstandhalter können beliebig erhöht werden und durch den Nubsi sollten…
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
cover low beam nissan almera classic b10 increased volume
Print settings: PETG 20 % Infill 0,8mm Nozzle worked fine 3 Perimters hi zusammen, man sitzt recht viel am PC, da 3D-Konstruieren sehr zeitaufwendig ist. Der ein oder andere dann noch mehr durch die Arbeit am PC. Mein Nacken und die…
The original version was a fraction to tight on both Lelit's and Rancilio's portafilter's so I increased the inner diam. Not tested yet. new version added today 23.05.2023. I had previously exported the file in meters and not in mm. Now…
I got the Powerhobby twin fan heat sink for my Mojave and immediately noticed some things about it I didn't like. The fans don't have enough "breathing room" as in the heat sink fins are very shallow and don't allow for much air flow at…
DISCLAIMER: this is all custom made for my printer and I doubt it would easily fit others' printers and needs. I'm sharing these files in case someone finds them useful, not for directly doing the same modifications as I did, but this may…
Increased space to fit all tokens provided. Original fit one fewer or each token then came with the game.
NOTE: this was only tested using the following Neptune 3 Pro / Neptune 4 Y Axis Linear Rail Kit ( AliExpress ), so YMMV This mod may also work for Neptune 4, but I do not own one to test with With toolheads such as Stealthburner, one…
I used Fusion 360 to remodel the shaft and crank from the original model such that I can adjust the gear ration. I did not know the gear settings used in the original model so I set my own. The files provided are drop in replacements for…
Make your printer faster by going just that little extra to 11!
Eine Erhöhung für Ender 3 S1 Zero Offset CR Touch Mount wenn man das Vulcano Hotend nutzt. Mit Kabelführung
In upgrading from a Prusa i3 MK2 to a Prusa MK4, I found the existing IKEA LACK enclosure needed more headroom. This riser kit supplies the following: (4) leg risers (requiring 16 screws to mount) (4) panel risers left (4) panel risers…
This is a modified end of a Williams upkicker solenoid. The design is deeper than the original, which means the ball settles in faster and hopefully avoid situations where the ball is still moving when the game fires the upkicker, often…
Now that the Core One can use MMU3, it needs more space in the buffer because of the increased size of the PTFE tube. So, to maximize the space in the buffer and minimize issues (filament pushback), i remixed the segmenter by adding 1cm…
Reddit post asking how to model this in Fusion 360 prompted me to attempt a fully parameterized design: Reddit Post: https://www.reddit.com/r/Fusion360/comments/1d1ak05/easiest_way_to_make_this_shape_in_fusion360/
Increased internal width for larger multimeters to 87.5
I was previously only able to get a maximum of around 310mm Z-travel out of my Voron 350 because the cable chain hit the frame at the top of the printer. This annoyed me and was an issue for some of the larger parts I print, so I moved…
I was unable to find a D25mm / 3.5 mm rubber O-ring in local store, so I bought a D25 / 4.5mm O-ring. It But appeared that it is impossible to attach the spool holder to a puck with that O-ring, so I decided to create a mod with a bigger…
I designed an X-axis reinforcement for my CNC machine, 3D printed in PETG. The L-shaped structure enhances rigidity and stability, reducing unwanted vibrations during operation. Mounted with M6 screws, it ensures a solid connection to the…
This height increase adapter is designed for a press fit (also known as an interference fit). For my setup, it was a tight fit that required a little bit of force to install, but no extra parts like screws were needed. Testing the Fit: To…
ALSO, check out Reddit, we have a new unofficial user group r/Creasee3D, with all kinds of cool stuff for the Creasee FDM printers. I just created a custom bed overlay for the Creasee printers. This can be used in both Cura and…
I had my favourite tool holder installed, but the tools kept hitting the rollers, belt, and parts of the printer, filament tube, and cables when it was printing high models (like top height possible on ender 3) I wanted to put stop to…
Stackable Storage Bins by Project34 Increased the bin size to 180x300
I have lighting cables that run on both sides of the gantry top. This lets me route them cleanly. This fits the upper gantry height extension made by Seesoe. It will not fit a stock ao-101 without that modification. Print instructions…
The files here are for the Prusa i3 This modification worked extremely well on my Mendel90 - the Prusa and Mendel90 share a lot of common design aspects so there is no reason this would not work for Prusa machines as well. I can clearly…
Print → Print the “StreamDeckMini_Height_Increase_Stand” like it is with no supports.
The swappable front panels on the Maingear MG1 add a unique touch of personalization to each of these prebuilt PCs, but they also restrict airflow. In normal situations, this rarely has an impact on performance. However, to get the most…
This is a simple remix of Tennis racket wall mount v2 by Félix It increases the tolerance of the wall mount part so that it can be more easily inserted in the hanger part. However, it still does have some friction so that the hanger does…
I had a problem with our robot vacuum cleaner and our norden table. Sometimes the cleaner was stuck under the Table. I created some simple feed to raise the table by 2cm. I printed the feet with extrudr hard tpu.
![Cable chain for K1/K1C with ptfe guide. Increased for 3mm [All in one]](https://media.printables.com/media/prints/a86c567a-5a3b-4943-9090-cc2aab76416c/images/12639885_c80c9368-1e98-4334-bf4a-66df405cee53_33bcc2dd-4844-4ddb-ba5e-63fdf8453e0e/cablechain.png)
