Counting matching models…
Simply design of an old CRT TV as MINI 13 or LUCKY13, “face” is swapable with allen key, include a blank, heart, smile faces, use the blank one to create your own emotion and share your MAKE. print in layer height 0.15mm, first layer…
The Ender 3 S1 Pro comes with a sprite extruder, which is overall not a bad piece of kit. However, the probe is mounted quite far away from the nozzle on the Y axis. This makes it impossible for the bed mesh to correctly account for any…
K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…
It's simple and looks not that bad. Print this in PETG/ASA/ABS Supports are required. Layer height 0.2mm Cooling is not the problem. Feel free to remix this or ask for modifications. PS: I will add photos when I get home. I was running…
After I changed nozzles to a slightly longer nozzle, the nozzle would crash into the bed when homing/probing. I designed this spacer to offset the probe slightly to compensate for the extra nozzle length. The spacer is 2mm thick which…
Should work for both a BLTouch and CRTouch since the mounting holes are the same. Print oriented with the extruder-side mounting surface on the build plate. Supports are optional depending on how well-adjusted your printer is. I printed…
Starter kit for modeling your own Ender 3 Neo shroud. (took a lot to find.) Big thanks to everyone who supplied the files for this. (NOTES) You must orient this to your personal measurements. This is not oriented dimensionally together…
This CRT Monitor should print up quite easily using the same settings you had on your Lucky 13. I recommend supports on build plate only, but be sure to place a support blocker inside the small neck stem hole; there's no way you're…
Creality Sonic Pad G-Sensor for CR Touch or BLTouch Mount for Ender 3S1 or Upgraded SpriteExtuder upgraded Ender3v2. Y-axis zero offset. Prove offset: x_offset: 40 y_offset: 0 Links: JST 1.25mm both female 5pin cable:…
Użyj metalowego drewna crtouch, które znajdują się w zestawie z interfejsem.
This is a mouse and keyboard that clips on the shoulders of Dummy 13 to resemble a computer together with the CRT head. You may find some other uses for it too.
This is a minimal case for a IR sensor (Reflective Optical Sensor TCRT5000). The sensor dimension are approximately 30x14mm sensor fits inside the case without the need of screwing or fixing in any other ways, but a screw hole is present…
A recreation of the old-timey tools for technicians working on radios and TVs. Has a flat-head on one side and 0.1" hex on the other. Other variants are possible. UPDATE Sept 2026: I've uploaded a version with a longer hex end as…
This plate will let you put a Dragon Burner tool head onto an Ender 3 X carriage (or any printer with the same plate [probably™]). Printing: Something with a higher temp resistance than PLA should be used considering how close it is to…
Original model is Ender 3 | Dual 5015 Fan Duct by Simon_Szi_ I modified below. 1, I added a mount for CR touch. (close enough to the genuine CR touch mount location) 2, Enlarged mounting holes so that we can adjust the fan height up or…
Replica Panasonic BT-S702N CRT Monitor for Jurassic Park Explorer builds. Includes an LCD variant for small flat panel displays as an alternative. It includes Faux buttons to the real thing, (Non-Operable) Hardware Required: 2x 3mmx12mm…
This is a model of a tcrt5000 infrared sensor
Cura didn't like the original file. So I imported to TinkerCAD and exported it to a new .stl cura seems to have no problem with it now. It's a simple fix nothing was changed.
These are the enclosures I designed for the DIY-Sensor for a Ferraris wheel power counter with an Amica NodeMCU ESP8266. You can read details on the setup and build and get the software at…
Very Hard to build and expensive to get the parts probably. You know if you're skilled enough to build this and if you aren't; please don't flood me with question on how to build it. Instructional PDF to build it step by step and how to…
Simple adapter to mount a BIQU / BTT Microprobe to your existing CRTouch bracket.
Broken CRTouch case due to dive? Print a new one :D NO SUPPORT NEEDED! Material: PLA /0.4mm nozzle
Version Slim y mejorada
This is a lightweight Sherpa Mini extruder mount/holder/bracket for Ender 3. Compatible with Creality CrTouch. It is small and light. This is my own desing and I printed it from ASA filament. You may use any filament that resist high…
THIS MODEL IS NOT "PRINT AND USE" , some handwork is needed to make it one piece. The difficulty level is above average due to very small size of some elements. Assembling instructions and demos can be found here:…
**UPDATES** 6/29/2023 I fixed the path that the m3 square nut/ hex nut slides into to mount the Mini-SB to the mount I had created a custom mount for the Mini-Stealthburner toolhead for my heavily modded Ender 3 v2. When I decided to…
Allows you to not have to take the CR Touch off to take resonance measurements for Sermoon D1 with Sonic Pad for Klipper. This is a remix of the below two designs. sermoon d1 adxl 345 mount by PA3MA - Thingiverse Sermoon D1 CR-Touch mount…
Made a silly CRT-style enclosure for a “cheap yellow display” (ESP32-2432S028R). Makes a great little desktop monitor for XTouch or any of your Smart Home monitors, and includes a functional power button and multi-hour battery for less…
Mount for a CR Touch on the Satsana hotend fanduct. Remixed because my nozzle was crashing into the bed. Lowered the CR Touch by 2.5mm compared to the original mount.
CRTouch or BLTouch mount for CR200B. Its a Remix of the Realy good model from Bastelgarage (Danke). I Remixed it for Cablemanagement. I Printet it with ASA and put some inserts in.
Handles for protecting front and back of the radio while also raising it over surface. Printed from PETG. Create opposite piece by mirroring object in slicer software. Glued 4x round rubber feet (up to 8mm diameter).
This is a remix of another excellent remix, just to add the CR touch to the build. This version is only for Ender 3 / Pro, not V2. Update January 31: tried to install it on my printer but i found that the heated block is a little bit…
I created a mount for the Mini-Stealthburner fan shroud and orbiter 2.0 extruder. I intended for this to be for my heavily modded Ender 3 v2. I decided to convert my Ender 3 v2 to a Voron Switchwire Style Core XZ printer. It also features…
This vintage television model captures the iconic look of early CRT screens with a clean, stylised design. The sculpt includes a curved display, side control panel with dials, speaker grille, and classic antenna, all arranged in a…
Remix of satsana to fit dragonfly bms hotend with 5015 cooling fan Fitted for ender 3 pro only as thats what i have….will fit any printer that uses the same x carriage as ender 3 pro probe offsets are: x-53 y-15
Print as many of the knobs as you think looks good - I went with 3. Print 2 of the smaller legs for the back and 2 of the taller legs for the front if you want it angled. For the aerial, straighten out a paper clip, heat the end and…
I tried other mounts and they just didn't fit with my CRTouch so I made this. Works well for me. This has spacers for the CRTouch wire so it will work with either the BL or CRTouch.
A slightly stronger version of the original, with more space around the bolts and more material holding the CR touch in place
Low-profile X-axis limit switch mount You will need this to fit zero Y offset CR touch probe mounts like the MAXPROBE backplate on your Creality CR10 Smart Pro Features Low profile Uses original components and fasteners Fully reversible…
So my problem was that BMG clones didn't grip the heatsink hard enough and the whole thing sways side to side with the slightest touch to blobs or overextrusions and I wanted to stop that, so I designed this to be super rigid and it has…
Moves the CRTouch location to 0X, 44Y offset. Fixes variance slop due to the carriage shifting during a print. I found the reference model improved the original but still had to much flex that was affecting the auto bed leveling results.…
My 3D touch died and I still had a CRTouch lying aroung but the printer I needed it for has a EVA3 printhead with does for the CRTouch. So I made one.
This is an old design I made and still use on my ender 3 but it should be usable on any printer with a front mounted 4010 hot end cooling fan. It is adjustable by simply sliding it down and tightening the bolts. You can see it in my…
This is a remix of this model: https://www.printables.com/model/139183-ender-3-v2-voron-stealthburner-conversion Important: You have to flip the bottom bolt of you original Ender 3 Carriage, so that your screw head is on the printhead…
CRT BOT Figure, easily attachable joints follow me or DM me linktr.ee/neonshambles
I recommend printing at 10% infill to make sure the back of the model isn't too heavy The cord will be strained at the bottom, but it is hard to avoid it to keep the design of the model Depending on your printer, the charger may be hard…
Bracket for Roland vinyl cutter holder that uses crtouch mount points with longer screws. Tested only on Ender 3 Neo. Should be compatible with all neo series but I have no way to confirm that. It is made so that the bottom aligns with…
A upgradable face
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
It printed just fine with PLA on my Ender 3. No supports were needed if positioned lying on the side. The layer height was standard 0.2 mm.
This cap is designed to provide protection to the extreemly fragile glass neck of the Macintosh 9-inch CRT during storing or shipping, or while working inside the Mac. Push the cap down over the CRT neck and the four prongs snap onto the…
A quick and dirty remix of Jonathan Gahn's remix, now compatible with CRTouch Probes.
I printed and used the original, and all was well, until I needed to take this shroud off several times for working on the hotend. Over time the screw head got stripped out on the screw that's covered up down inside the shroud, and the…
This is a portable game console. A portable NES emulator with a retro flat CRT screen. The ESP32 code is a modified version of the 8 bits emulator from Rossumur ( https://github.com/rossumur/esp_8_bit ) with directly connected buttons…
Check out more face options @ Master Gadget
A compact infrared reflective sensor for fischertechnik, based on the TCRT5000 reflective optical sensor with transistor output . I needed them for a line-following robot. Use an analog input pin to measure the signal (sensor out pin).…
allows for really good part cooling aswell as accurate and repeatable probing due to the 0 YOffset. default plate MGN12H
Small tool designed to open the internal case clips on IBM 14L10/15L10 (Aptiva) and similar Monitors. These clips can only be reached through a small vertical opening (see image1). Just insert the tool through these openings, making sure…
Remixed the holder to work with a Creality CRTouch insted of a BLTouch. The connector is in a different place and was blocked by the original support. You can use the M3*6mm screws that come with the CRTouch and screw them directly into…
These models are for the USI Pi4 9" CRT monitor from 1982. There are the products of the following video:
(this is not my model) This so your "character" can be entertained
Lectric xpress or xpeak (not tested on others) screen cover to show the real state of charge for you battery. All voltages are rounded down to nearest whole number for benefit of the battery. I've seen other versions of this but they have…
Here is the iconic SaladHomeVideo tv that plays at the beginning of my custom VHS tapes! I needed some miniature TVs for a miniature I'm making so I ripped this from the Blender animation I used it for!
Mini moniteur vidéo composite CRT pour un Raspberry Pi. Utilisation d'un écran CRT Plat: https://fr.aliexpress.com/item/1005001892618952.html Vidéo en fonctionnement:
Remixed E3D mount with a CRTouch mount by Dbarbs . Aligned the mounting holes and added tapers/reinforcements to allow for printing without support. Follows all the same instructions as the E3D mount just with the option to include a…
Just bought the Ender 2 Pro and Creality CR-Touch. No Mount that i can use with this printer in the Box. So, the solution: I found one here, plus my thought with the inserts in the two holes forwards (M3/6) and with Tinkercad I made…
This is a portable game console. New version of my Micro NES console with portable flat CRT screen! The case had previously broken, so I took the opportunity to reprint some part in multicolored filament. Change the buttons and make the…
Hanger brackets for use hanging speakers using the side vent slots on a Sony PVM CRT TV. I designed around a Sony PVM-14M2E/U and have not tried with other model PVMs but I would be surprised if Sony used a different square vent spacing…
Just took the great design by DevCyclops and made it adjustable to use it with generic Volcano Nozzles and the Stock K1 Style Nozzles. Does not work with Vortex Duct since it is to wide and will collide with the the CRTouch. BLTouch…
Might need to use some m3 washers to extend it down a bit
This is a design to help you figure out the correct probe offsets for your specific BLTouch / CRTouch mounts. The lines on the design should be 5mm apart, but it doesn't really matter because it's mostly just to be able to make sure you…
If you're opening up your Macintosh for repair, you really don't want to bump the vacuum tube and accidentally let the ghost out of (into?) the machine. So protect your investment with this little cap. This was designed and tested on a…
A simple mount for Pinda (or other) induction probes utilizing stock CRTouch holes on the Ender 3 Y-axis gantry. Parts needed: 3 x m3*8 (or longer, up to cca m3*12) hex screws 1 x m3 hex nut You then may wire the probe into the dedicated…
Printed in TPU so your settings for TPU will work I have made these with a 40% infill, 2-layer top and bottom with 4 walls but i don't see any other settings not working depending on your preference i have use 4 M5 nuts with spring…
A holder for a 100×75×3mm litophane with a built-in LED holder. It is designed to be used with one of these LEDs: Search for “1W LED chip bulb” on Amazon/Ebay etc. to find one of these. 🪛 Assembly I used a 10Ω (1W) resistor in series with…
Adjustable Mount for PTO2, that fit on Desk Mount or any 20x60 aluminium extrusion. Reuse Hardware from WinCrtl/Winwing.
This is a mount for a wide angle Arducam to be used with OctoCam. OV5647 5MP 175 Degree Wide Angle Fisheye Lens on your Ender3v2 Available here: IOV5647 Camera Module for Raspberry Pi 3B 4B 3B+ Adjustable Focus 120 130 200 160 Degree…
A remote holder for "old school" SANYO TV remotes circa mid-2000s. This will not work for all SANYO remotes. This could work with other remotes, both SANYO and non-SANYO, as long as they fit within these dimensions: Between 30.5 and 46.5…
It works just like the stock BLTouch mount. This remix has a cutout for the wires to run through.
--WORK IN PROGRESS - The CRT spacer collides with the part cooling fan's screws. -- I wanted to try using the K1 Max's heatbloc combo on my Sprite Pro extruder since I wanted a volcano nozzle for more flow and it fits! issue is the longer…
bltouch mount modified from this model: https://cults3d.com/es/modelo-3d/herramientas/5015-artillery-sidewinder-x1-dragon-mosquito-volcano-combo-duct only needed to make room for the cables and connector for crtouch, the distance between…
A badge reel from amazon (https://www.amazon.com/gp/product/B01GEVK3AK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) will press fit into the back and then the tiny pin slides in via friction if printed correctly and holds the line in…
I designed this model for a robotics competition because I needed a sensor array but only had individual sensors on hand. I then modeled a small enclosure for three equally spaced at 5mm. When loading the file to your preferred slicer,…
Print in PETG, ABS, or better Tree supports in spot shown if you want, or just bridge it and have it be a little messy. Recommend 4-5 perimeters for stiffness. Need 2 M3 screws to mount sensor and 2 M3 screws to mount bracket to…
Hanger brackets for use hanging speakers using the side vent slots on a Sony PVM CRT TV. I designed around a Sony PVM-1343MD and have not tried with other models but I would be surprised if Sony used a different slot vent spacing or size.…
CRTouch mount inspired by mount from @JonasBurkhard. Short variant is for precision positionig of probe with washers. Long variant can be used as it is. I also include modified Fan duct. Original duct and mount can be found here:…
A compact, all in one PC with a Pi 4 and 4in monochrome CRT. PETG is advisable for the body piece, as the pi 4 can run hot. You will need: All printed parts (print in the provided orientation - window should be a single layer of…
I couldn't find a remote holder with a big enough spot for my ancient electronics. So here it is! Room for a TV and VHS/DVD remote. Printed in PLA at 0.2mm
This is just a simple remix of the mounting plate by a_shj. I don't have a BLTouch and instead have a CRTouch. I remixed the model to accomadate the top plug of a CRTouch.
This model should fit with hotends shorter than the Ender 7 standard hotend. Printed at 250/82, 100mm/s, no support
This mount tucks the probe as close to the nozzle as possible. SV06 style and SV06+ w/Volcano nozzle options. Below are my settings in Printer.cfg [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: 24.0 y_offset: -25.9 pin_move_time:…
The same fan duct mount but for CRTouch instead of BLTouch
DOES NOT WORK STABLE TROUGH GLASS YET, DO NOT USE IT, JUST FOR TESTING. (Maybe it is working with an aluminium surface.) 2016.09.30. With this position I can't setup it correctly :( Feel free to post your idea. At the first place where I…
Changes from Aaen's model: Notch for CRTouch plug Bottom roller nut now allows for wheel tension adjustment enlarged all the holes by 0.2mm for better tolerances Prints just peachy in ASA.
Hi! I made some spacers to use with my CRT for the summer. These old beasts can get warm, so a bit of airflow doesn’t hurt—but I wanted something extremely quiet. Spacers Size: 10mm 20mm 30mm 40mm 50mm Fans used: Noctua 200mm NF-A20…
If you upgraded your Creality printer with Bondtech DDX + Mosquito hotend and you have a CRTouch, then this should be a suitable mount. Make sure to calibrate probe offsets, but with my Ender5 Pro, offsets are: x_offset: -29 y_offset: -4…
I found a small CRT TV in a thrift store, and decided to make it into a mini macintosh. This was a really bad decision. Trying to make one of these yourself is not recommended. I've included the original f3d file, if someone would like to…
It's square It's heavy It buzzes and likely takes years off your life You got it It's a CRT Monitor!!!
Quick remix to give clearance for CRtouch cable. Big thanks to Troche Hole for the great design!
