Counting matching models…
This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…
This is a fully parametric, lidless box that I made as an exercise to learn how to use OpenSCAD. Parameters that can be changed include: box dimensions, wall thickness, corner roundedness, hex radius, and which walls of the box have the…
Remix adds hexagon cutouts in bottom and lid, also with cutouts
There are many different sizes, both in width and length, and in height, and yet the hexagons are modeled the same in all models and of course they still remain symmetrical.
Remix of @DrCox_1746174's Nothing Phone 2a Case. Added additional cutouts and indents to mimic the original design of the phone. Also added cutouts around the volume and power buttons for easier access. Printed in Glow in the Dark PLA.
SnapCase for Raspberry Pi Zero W Dimensions Designed to accomodate an Raspberry Pi Zero W board. Design Process The goal was to create a neat and quality case for the Raspberry Pi Zero W. It should be easy to print and use the minimum…
It will print without supports. Mostly.
I remixed the original holder with some deeper cutouts so that you can more easily grab an exact number of coasters.
An ESP32 C3 Supermini case that has pin cutouts so you can use breadboard wires.
A stepped makeup organizer with four compartments of different heights for lipsticks, brushes, palettes, and everyday cosmetics. From above, the outer walls form faceted low-poly hearts. The sides use a repeating regular heart lattice so…
I love printed mags. The sure.t mag by t4obrien is my favorite, it works great in most things. Unfortunately when I built a Crush I realized that the mag release cutout on basically every 3d printed mag differs pretty significantly from…
This model is compatible with the lego system.
My magnum opus. A skeltonized case for the flipper zero featuring cutouts for all ports. This case was one of my first designs so sorry if its a little janky. PRINT WITH FLAT SIDES FACING THE PLATE. Infill: 100% Supports: YES Adhesion:…
Modified case top and bottom with 5v and ground GPIO pins cuts to power my LED light. Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips (Clip_wire_interlock) Parts Needed 4x M2.5 screws
In the land of Prusa, everything gets hexed, including game insert bottoms.
I recreated a model sent to me by ThomAce Van Doom on the Minisforum Discord. Included is a Fusion 360 file which is fairly unoptimized, but it should be enough for someone to modify it to their use case. Included is also an example .3mf…
Added cutouts for magnets, use as many as you like to make it as strong as you like, the magnets should just press in, however, a touch of crazy glue make them permanent. These magnetic “helping hands” solder station are truly badass if…
Great original model - but I wanted to remix slightly to open up use-cases to wider application. The idea of a clear back to utilize the light in the console is brilliant - but I typically don't use PLA for automotive applications or…
Really like the original design by Alley Cat What I was missing - it's the heartbeat LED. Also, for my taste, USR button (bigger one) was too flush with case, so it was a little hard to press. Added a Little tactile bump on it. I added a…
A shade for a wineglass tealight candle with heart cutouts. This shade was meant to go over a wineglass that has a tealight in it. The model was designed for a glass with a brim outer diameter of ~66mm. Scale it to fit your glass. I have…
Hi everyone. I am very proud of this one and it has a lot of features. I made this to be used with my Honeycomb Storage Wall setups. As such, whenever I make a model I will simply create it through OpenSCAD, put it into Orcaslicer, and…
I have added cutouts to the Slack Lack bottom rear corner to run cables into and out of the enclosure, similar to how it's done in the original Lack enclosure. This is the left bottom rear corner and corresponding catch. Simply mirror the…
The model didn't fit my tstak model (version 2) so I very crudely cut out the model in Prusaslicer and exported the STLs
I always leave the Peak Design Capture Clip plates on my cameras, but also wanted to use this fantastic gridfinity bin for the Sony a6700! I've added two different versions - one should fit the smaller Peak Design Capture Clip plates,…
The Core One Printhead Left Cover with cutouts for access to the heater and thermistor connectors. There is a compromise I made between the ease of removing the connections, printability, and still functioning as protection of the rest of…
See youtube video for details:
No special print settings, I have printed approximately 40 of these for School… case works well with multiple students working on them.
A challenge for your printer. Mesh file in 2 orientations and step file with/without fillets. Give it a try printing and post your result Test print is ongoing ...
The original model is great but lacks the possibility to put heatsinks on the back of the IR-LEDs. I added two pockets with 11x11mm.
Box with lid that i made for learn Fusion360
*Added cutouts for 4mm M3 Heat inserts, to mount the extruder to the toolhead. *Fixed orientation of the model, shortened the total length of the end prongs sticking out. (unnecessary, prone to breakage after printing in original model)…
Rear hatch with cutouts for CAT logos, they just need to be glued on to the hatch.
I have make cutout for true functional anti-vibration feet model from schuetzi99 . The cutout fits for MK4 standard feet with slip protection version (URL to the right STL). I have used the PrusaSlicer 2.7.0 only so the .3mf file is a bit…
DONE ✅ Custom sizes ✅ Drawable cutouts ✅ Straight or threaded screw holes ✅ Selectable screw hole locations ✅ Multiboard-compatible screw holes ✅ Specify dimensions in mm TODO Fill extra space Stacked printing <Suggest more in comments…
Everything is the same, but in original file you can see cracks around Raspberry Pi logo. So I repaired them for better aesthetics and easier printing. Enjoy ;) Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips…
AIO Fan Spacer – 2mm & 4mm (Squircle Cutouts) This fan spacer is designed to improve airflow efficiency and reduce turbulence when mounting 120mm & 140mm fans to a AIO radiator. It creates a small, controlled gap between the fan and the…
This is my first submission while I wait for my MK3S+ to arrive. Expect great things.
* SnapCase for Arduino UNO * Dimensions Designed to accomodate an Arduino UNO board. Design Process The goal was to create a neat and quality case for the UNO board that protects it while still allowing access to all major I/O points.…
A remix of Unifi UCG-Fiber 10-inch Rack Mount by @Mauker. It's a version cut down into pieces to print without support
Here are models of the shafts of EC11 flat shaft and EC12 shorty rotary encoders, commonly used in the custom keyboard hobby. I've added a 1° draft to each shaft to make the fitment easier. Just grab your preferred format, bring it into…
Technically probably not hexahedron as it has more than six faces ¯\_(ツ)_/¯ Looks great while printing and on the desk as well. Gif from slicing: https://imgur.com/jWYKVmk
I made this because I prefer cases with individual camera cutouts. It should be able to be pressed onto the cameras when the phone is in the case. It sits tight enough to not fall out. When using a 0.4mm nozzle, make sure to enable…
This model is compatible with the lego system.
If you just want a good solid case, print "OnePlus15BlankCaseWithCutoutsAndCameraProtection.stl" and "OnePlus15CaseCameraProtection-Thick.stl" I printed "OnePlus15BlankCaseWithCutoutsAndCameraProtection.stl" in 95A TPU and…
A simple combination of two mods to the Clockwork 2. I wanted a way to secure the PTFE tube (needed for use with the ERCF) but also a little extra space behind the cowling for a nozzle cam USB cable.
9mmplease's hotend holder for the Flashforge Adventurer is a neat design as it allows easy access to the most common sizes of hotends. However I had issues printing the original hotend with my 0.6mm nozzle at a 0.3mm layer height. The top…
This is identical to this insert created by fuchsr , with a small modification. Two additional cutouts were added to the insert. The cutouts are to allow some extra space under the cards. This in turn should make it a easier to remove all…
Printables re-post of a remix I created and posted to Thingiverse on 2021-10-05: https://www.thingiverse.com/thing:4982218 TL;DR : this is a remix of Nautilus Shell by @tc_fea that has been scaled and mirrored to be identical to the…
This is a modified version of the original riser, adapted to improve usability and access for my setup. I increased the clearance to the glass plate to 70 mm , which makes it much easier to remove the glass panel. It also provides enough…
A four heart clover shaped makeup organizer with low-poly faceted walls and a repeating heart cutout lattice. Four compartments of different heights keep lipsticks, brushes, pencils, and compact palettes sorted on a vanity. Open lattice…
After Multiple designs, I wanted one that I could fidget with... I found it was difficult to spin the gears without cutouts. The full side cutouts didn't have the full heart shape when viewed from the top..... I made 3/4 cutouts for left…
Gridfinity 2x2x9 with hex cutouts. No magnet holes.
My Build Settings Material: PLA Layer Height: 0.2mm Wall loops: 6 Alternate extra wall Top/Bottom Shell Layers: 5 Infill: 25% Grid First Layer Speed: 50mm/s Speed of Everything Else: 80mm/s Slow Down For Overhangs Supports: Tree, On Build…
Remix of Bit driver Added relief holes and keyring hole
MarkBenson's mod of the the swiss keyring with the So Make It hackerspace logo embossed on one side. Printed example shown was acetone smoothed at 20C for 2 hours. Print instructions Category: Tools Summary MarkBenson's mod of the the…
Added switch cutouts for the switch I purchased from AliExpress , added two pass through holes for wires, and made a cutout in the back to have space for wiring. I should have purchased a 3-positition switch, but used 2 switches to allow…
This is Cuiv's Tri-Bhatinov mask he designed for use with a Celestron C6 and Hyperstar, but with a cutout to support the Celestron Dew Heater. This worked well, along with recentering the corrector plate, to significantly improve my…
box has a sliding lid I glued one part to the corresponding place to have a sample piece I plan to develop an improved version. Please feel free to leave me suggestions for improvements.
A remix of the Oneplus 15 case that has cutouts for all of the buttons.
settlers of catan bord rim with cutouts for trading ports they adapt to the existing cardboard Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.12 Infill: 20% Filament: 123 3D Jupiter PLA Blue Notes: settlers of catan bord…
Amended the existing slim flat beepy case - https://beepy.sqfmi.com/docs/3D (rev 6) - and added cutouts in the Front piece for GPIO pins to stick out
Simple Remix for bigger Watermeter (100mm), Lid-Cutout and another Cutout because of Water-Meter-Housing
So I originally printed out the SKR MINI E3 V3 Case created by MrTeliP, but when I installed by SKR Mini E3 V3 board it wouldn't sit flush in the case by either 1mm on one side, or by a 4-5mm on the other side. It looked like with my…
lever arms now include a magnet cutout, and magnet holders for the screws are also included
I prefer to cut up recycled paper into ¼ sheets with a paper cutter instead of paying for sticky notes. This holder keeps everything together. Print settings: .2 Layer Height Wall Lint Count = 3 15% Infill 100 mm/s 6 hour print time 72g -…
A 2x10 LEGO compatible plate with 3 cutouts for Cherry MX Switches. You'll need keycaps that are not too much wider than the switch itself, due to non-standard spacing between the switches and boundaries of the lego plate (I used these…
Found this dock but discovered that it fit so well that the side buttons were registering as being pressed. I simply added cutouts for the power and volume buttons so they wouldn't get pressed.
By using arch shaped cutouts, you will save on filament and printing time. This works fine if what you are storing is bigger than the arches. You can resize the box to your liking. I printed with PLA with 15% infill and they came out…
This ornament is inspired by Kurpie paper cutouts. Originally, the ornament is cut from paper using scissors. It's characteristic of the folk art of the Kurpie Green and White Forests in Poland.
I made this wallmount with sided cutouts for the Malolos Pi Case. Category: 3D Printer Accessories
I needed a cover for my hydroponic tower that has cutouts for water lines to go through.
Watch the original build video: https://youtu.be/jKdu9TzRMRw Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean. The other half saw the cutouts in the print and asked if I could fill…
An approximately 80mm diameter ring to accommodate a rolled up , wrapped, spiraled cord, rope, or string.
This is the remix of the original x-axis from Prusa with additional belt tensioner. If you have Haribo and original Prusa motors (with integrated rod), it works fine, but when you have steppers and Z threaded rods connected using…
I use the EZABL addon and without an M3 nut, I didn't feel it was stable enough. After trying to hold a nut with tweezers into the small space available, I decided to throw together this quick remix. Apply a dab of superglue to hold the…
This is a modified case for the Apollo MSR-1 mmWave radar sensor from Apollo Automation. The MSR-1's pcb has solder pads for 5v, 3.3v, ground and GPIO/I2C, for great extensibility. But you can't easily solder leads to the pads with the…
print with or without support, should be gucci either way
This is a remixed version of the OmniaDrop plate for the Creality machines. I added a vertical strain relief bracket and I also added two M4 cutouts to mount the extruder. I used some superglue on the nuts to help lock them in, and just a…
I remixed Mycelia Organizer / Inlay with cutouts for easy opening. Original boxes locked and were harder to pry open.
The cover combines aspects of other covers and includes these improvements: cutout for wifi heatsink cutout for main heatsink cutouts for both microUSB ports cutout for microHDMI port 2 additional cooling slits 4 nubs to better secure RPi…
📷 About this model This is a custom modification of the A9 Mini Camera housing. Unlike the original, this version is completely solid and has no port cutouts or cable holes . It is ideal if you want to: Customize and drill your own…
This is a protective cover designed for the Mean Well LRS-100-5 power supply. It includes cutouts for an XT60 female panel connector and an IEC C14 (kettle-style) mains inlet, so the PSU can be integrated into a clean, enclosed setup with…
Simple Hexagon-shaped cutouts for use in modelling clay. 4 Sizes. Printed in PETG for strength and durability Dimensions: Edge width : 0.65 mm // Edge Depth: 6 mm Cutout Width x height: hexagon01: 23.65 mm x 20.02 mm hexagon02: 18.19 mm x…
Remixed from Fabmaszter's brilliant insert ( https://www.thingiverse.com/thing:4610499 ), but to add the ability to store the expansion/upgrade content. PengLord has already done a remix for this (…
Assembly requires Three M2 screws and nuts required ( 2 x 6mm and 1 x 8mm) if you would like them removable. Alternatively, use a toothpick as a ‘temporary positioning screw’ and glue in place. I recommend placing the nuts on Side B and…
INTRODUCTION: This is a ring gasket mount case for the Teamwolf Zhuque keyboard. This version has rear side cutouts. Another version has front side cutouts. INGREDIENTS: (1) Teamwolf Zhuque plate, PCB, and cord. (2) ring gasket material…
Replacement control box for the WEN 33013 that contains cutouts for a tachometer display and probe. I used a cheap tach from amazon that could wired to the mill power switch ( https://a.co/d/1xcFISM ). You will need to have a basic…
A unique 3D printable creation — this Large Electronics Project Enclosure, Customizable Cutouts, Screw Lid, Durable Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
I had a specific need for 2 additional USB 2.0 ports on the rear of my PC for certain devices that tend to act up when plugged into USB 3.x ports. Luckily my mainboard had extra 9-pin headers, so I purchased a few extra ports with 9-pin…
INTRODUCTION: This is a ring gasket mount case for the Teamwolf Zhuque keyboard. This version has rear side cutouts. Another version has front side cutouts. INGREDIENTS: (1) Teamwolf Zhuque plate, PCB, and cord. (2) ring gasket material…
These are simple lids for FreeGrid boxes, featuring neat right-angle cutouts to be able to see into the box, which also make the lids easier to pick up. Contains 1x1 to 1x3 and 2x2 and 3x3 sizes. Other sizes can be made using the .fcstd…
A unique 3D printable creation — this Large Electronics Project Enclosure, Customizable Cutouts, Screw Lid, Durable Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
Covers and Spacers for various cutouts in bathroom cabinets with a wall thickness of 16.5 mm. Cover for the cutout beneath the sink drain pipe Model: Cut-Out-Cover-B1-D16.8-Dia100 Suitable for: Maximum washbasin drain diameter: 90 mm…
Simple Diamond-shaped cutouts for use in modelling clay. 4 Sizes. Printed in PETG for strength and durability Dimensions: Edge width : 0.65 mm // Edge Depth: 6 mm Cutout Width x height: diamond01: 24.45 mm x 20 mm diamond02: 19.30 mm x 16…
DONE ✅ Custom sizes ✅ Drawable cutouts ✅ Straight or threaded screw holes ✅ Selectable screw hole locations ✅ Multiboard-compatible screw holes ✅ Specify dimensions in mm TODO Fill extra space Stacked printing <Suggest more in comments…
Plastic version of the cover for frosthaven Vanity storage made by NR This way you dont need a plex. Ive added some labels to simplify searching for all the monsters
Assembly requires Three M2 screws and nuts required ( 2 x 6mm and 1 x 8mm) if you would like them removable. Alternatively, use a toothpick as a ‘temporary positioning screw’ and glue in place. I recommend placing the nuts on Side B and…
![AlleyCat's Heltec T114 Pocket GPS Case [LED cutouts] [elevated user button]](https://media.printables.com/media/prints/241b2d97-8a0c-4c49-a520-2b100dfde4a5/images/10987558_e96b11b5-9647-4d9d-b112-74706dba54b9_1dc5c545-eb88-4bf0-8a4a-0228ad898e03/pxl_20251024_072036621portraitoriginal.jpg)
![[Improved] Flipped RPi Zero 2W Case and Cover with extra cutouts for heatsinks, HDMI, USB, and hex wrench access](https://media.printables.com/media/prints/2aa7b1f9-38b7-4336-a825-b126347809e7/images/11782945_c563df18-f079-4b52-ad8b-25b5231365b6_2d9e065d-38ee-4fe3-a68b-d98b2d83e589/img_20260120_004754721.jpg)
