Counting matching models…
My second job after fire ladder…static model caterpillar d11, for questions contact me at:[email protected]. A lot of time for drawing and printing ,but result is impressive!!!!All pieces are optimizer for print with minimum support---
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
Scaled down to match 1:220 from: https://www.thingiverse.com/thing:1621482
A 2x3 gridfinity bin for a D110 Niimbot label maker and 3 additional rolls of labels. Original model had 3 slots for labels and it was offset in a strange way (not centered). Print at 0.2mm layer height
A link to my Gridfinity Niimbot- D110 holder
I needed a small Nimbot spool case but couldn't find anything I liked, so I created one.
Rugged Box mit Inlay für Niimbot D11 und Platz für 8 Etikette und Ladekabel. Freue mich über jede Unterstützung :)
This is a 3x4x6u Gridfinity Bin for a Niimbot D11 Label Printer and three spare label rolls. Also, it's my first model... please be gentle! This remixes the Plain Bin (3x4x6) from @KyleWarren (my absolute favorite Gridfinity bins to…
link to Gridfinity Niimbot- D110 label sticker roll holder
NiiMBOT D11 Label Maker für IKEA Skadis NEU ! Update 24-7-2022 Version 2.0 mit Aufbewahrung des Ladekabels. siehe Bild beim Drucken im PrusaSlicer nehmt die Stützten zum aufmalen funktionieren sehr gut. NiiMBOT D11 Label Maker hier gibt…
A remix that allows the Niimbot D11 label printer to be stored on the Honeycomb Storage Wall
A IKEA Skadis holder for the Niimbot D110 Label Maker that gives you access to the power button and charging port.
Fits Niimbot D110 Label Printer, Press Fit 6x2mm magnets
A simple Gridfinity 1x3 bin of 6u high for Niimbot D110 label printer ( aliexpress ). The difference between this model and others is that the chamfers make the printer fit perfectly.
Multiboard / MultiConnect compatible holders for the Niimbot D11 label maker. There are options for the old version as well as the newer model. Port holes on the bottom to plug 'em in. Credits to Jonathan ( KeepMaking ) for creating…
This is a stand that allows a NIIMBOT D11 Label Printer to stand upright on your desk. For some reason the device was designed with a rounded bottom, so it cannot stand upright without a stand. The OpenSCAD file is included in case you…
A gridfinity bin for the Niimbot D11 including space for 15 labels.
1x4 bin that can hold a Niimbot D11 label maker. I couldn't find one that was holding it in that orientation.
This adapter works with the TP-Link Kasa KD110 doorbell on standard 4" double siding.
Had some loose Labels for my Niimbot D11 lying around and wanted to organize them. So I quickly modeled this stand for the standard labels. They all fit pretty nice. Holds up to 6 Labels. Printed lying down without any support.
NIIMBOT D11 Smartphone Label Maker Kit Bluetooth Wireless Tischständer ist für den Bürotisch gedacht damit das Gerät einen festen stand hat wenn man Labels damit ausdruckt. hier gibt es ein Video -→ Video…
I did not find a storage solution i liked for th D11 in gridfinity. I put little felt-pads to not scratch the Labelmaker. Note: Printed in several lines and glued together to use up leftover filament. Also Did not actually measure if it…
How to print: 0,2 layer height 100% infill (only matters for the hooks) supports: yes (I only recommend supports for the hooks) Material: I used PLA, any other material should also work well Printing time: 40min on Bambu Lab P1P…
A brilliant Spool case from Pawel Zawadzki - but only supported the 16mm spools - this version supports 32mm spools.
Requires a 1/4 20 screw and M3 Socket head with nut to fit to the camera. Since I used the strap lug to secure the grip I replaced it with two standard size camera strap triangles that allow a camera strap to be fixed to the grip side of…
KCD11 switch holder with holes for connectors and mounting with cable tie. Snap-in, no screws needed. 8mm version : With 8mm holes to fit standard DC5.5*2.x mm female connectors. RCA version : The holes on the model are 9mm and 6,5mm…
Gridfinity bin for the upgraded nimbot D110
this RC body should be easily printed with supports. going to put accessories out for it! Have fun! PLS comment if it prints well?
I bought a cheap Fichero Labelprinter at our local Action store after reddit user OilTechnical3488 reversed its Bluetooth protocol and published a web-app to control without a privacy invading app. Since the original packaging has a lot…
WPL dimension rims for inspired D110 Land Rover Defender 1/16 scale for MN-90 RC defender
Ein simpler Schleifscheibenhalter für den Durchmesser 115mm von Winkelschleifern. Das Modell kann erweitert werden. A simple grinding wheel holder for angle grinders with a diameter of 115 mm. The model can be expanded.
Gridfinity-compatible and stackable holder for a Niimbot D110 Label Maker . It allows opening and refilling the label maker without taking it out of the holder. Magnet holes have been sized slightly smaller than standard (6.2mm vs 6.5mm)…
I modeled KCD11 for my desk. I inserted 4 holes in the bottom part to allow it to be attached to any surface with screws or nails (as in my case). I recommend printing in PETG or PLA but tolerances are important, in this case scale the…
Mount plate for Schurter DD11 230 Volt AC power switch for the V-CORE 3.1 with 3mm, 4mm or 5mm electronics panel. RatRig V-CORE 3.0 and 3.1 - Compatible with no enclosure or enclosure 2.0 - You can find the switch here: Schurter DD11…
This is a Landrover defender, Its modeld after the real thing (the D110), if you have any questions about the model, do not hesitate to contact me! I used glue and paint to make it look better, but to be honest i am not a really good…
Hello! Even though I'm not very creative and still need to learn any design software, the ease of use of a Gridfinity generator (https://gridfinity.perplexinglabs.com/) allowed me to apply my Maker instincts and create this labeler…
Mount for the Niimbot D110 that gives you access to the power button, charging port and printed label without having to remove it from the mount. I originally designed it so it can be mounted flush with 1mm thick nano tape cut to size,…
This is ikea skadis holder for Niimbot D110M label printer. The D110M( D110_M ) released in 2024 has a smaller size than original D110. It can access the button without removing it from the holder.
This is the small version of my previous upload, the same here, if you have any questions than contact me.
Simple nestling bin for a Niimbot D110 label holder. It's a 1x3 and about 7u high if I recall. Has magnet holes, and shouldn't need any special settings from other gridfinity bins. For clarity, here's an Amazon listing for this item.…
I needed a wall mount for my NIIMBOT D110 and some spare holder just for glueing them into my cabinet door, so I created those models. Just print them with your favorite settings and use double sided tape to mount them wherever you like.…
NIIMBOT D110 Label Maker Holder for IKEA Skadis Pegboards Print with supports for the pegboard hooks. Note: Print in my photo failed 75% into the print, but I decided to just use it to be eco-friendly.
Avery labels are all well and good, but I now have a D11 printer - a tiny wee thing that prints off my phone. This is a complete redesign, but the concept is similar.
The first time one of these broke i replaced the drum, the second time i decided to do something sensible about it. If your printer has a broken gear every page will jam right after reaching the drum and when you open the panel and remove…
I wanted to put my D11 into a rugged case so this is the insert to make that happen.
After being frustrated at the lack of SKADIS options that fit my version of the NIIMBOT D11 thermal printer, I ended up remixing the closest model I found to what I was looking for (see link for the original author's model). The issue is…
Includes files for wall mounted and desktop version. Wall mount holes 40mm spacing. No supports needed, print on base as pictured.
Gridfinity for the new version of the Niimbot D110 (M). Two versions : Horizontal (3x1) Vertical (2x1)
Mount plate for Schurter DD11 230 Volt AC power and LED switch for the V-CORE 3.1 with 3mm, 4mm or 5mm electronics panel. RatRig V-CORE 3.0 and 3.1 - Compatible with no enclosure or enclosure 2.0 - You can find the power switch here:…
I made a simple desktop stand for the Nimbot D11 label printer. Simple, but sturdy with NO charging.
Gridfinity holder for the Niimbot D11-H printer Non-magnet (magent version coming) Includes finger groove for easy access 3x3 Gridfinity base
2 piece holder for the Logitech G Pro Wheel power supply to mount on your rig. One of the holders has a hole for the LED to shine through, so make sure not to mix them up. There are two configuration options and a choice between using M6…
This is a replica of a faceplate for the NEC FD1165 series 8-inch floppy disk drives. In particular the FD1165-A was often built into the chassis of the NEC Advanced Personal Computer, and a drive re-used from such a machine will lack the…
Mount designed for the Niimbot D110 label printer, made compatible with the Multiboard PushFit system. This version is compatible with the 2021 (i think) model of the D110 (approx. 77 mm length). Check yours before printing. Supports are…
Just a dummy KCD11 switch to plug panel hole after I removed the actual switch. Dimensions of KCD11 attached. The switch can be printed flat, but I recommend 45 degree tilt as that is more robust.
This is a remix of Schorsch3000's remix which can be found here: https://www.printables.com/model/1036580-gridfinity-bin-for-the-upgraded-nimbot-d110 . I added 4 compartments to be able to store rolls of labels to keep everything in one…
I gave my girlfriend a Nimbot D110 for Christmas, and she loved it, but wanted a way to keep the printer and some labels nicely organized. I liked the look of this Nimbot organizer , but I could never get the uploaded files to work for…
Mount your label printer for easy charging and use, all without taking it out of the holder.
Not a perfect fit, but good enough for me.
This is a Gridfinity-compatible holder for the Niimbot D11 label printer. The model comes in two sizes: 3.5×1 (because my grid have 0,5 cells on the edge) 4×1 (standard) so you can choose what fits your Gridfinity setup best. The holder…
Gridfinity 3x2 box to store a Niimbot D110_M label printer flat. It fits into e.g. IKEA alex drawers. Test fitted with D110_M , other D110 gridfinity boxes where to big. The design has a small cutout for the print port ensures a perfect…
This holder takes a Niimbot D110 label printer and mounts perpendicularly to an Ikea Skadis board to minimise footprint, using 2 of @davidmakes 's great Skadis Ultimount hooks . Allows full access to the power button, label printing (face…
This is a custom-designed holder for the Niimbot D110 label printer, made specifically for the IKEA Skadis pegboard system. It solves the common issue of loose pegboard accessories by using a reinforced mounting design. Features Solid…
I picked up a NIIMBOT D110 label printer, which comes in a small cardboard box—nothing fancy. I figured I could make slightly more efficient use of the available space to fit a few rolls of labels alongside the printer, all while staying…
If you're restoring or repairing a Minolta XD7/XD11, you might need to remove the film indicator window in order to better replace the original grips/leatherette. This involves cutting the plastic nubs that go through the door, as the…
Das Teil ist zweiteilig und kann nach dem Druck zusammen geklebt werden. Die Box ist “snack tight”, der D110 passt saugend in die Box. Zum entnehmen den Niimbot öffnen und am Deckel herausziehen.
Grip for Minolta XD, XD7, XD11 Printed from PETG - 70% infill, also printed from PETG-CF
Small stand for T14*40 labels from Niimbot D110 printer. Ideal for small displays, market stands. Not sure if other labels will fit. Print as print file and no supported needed
Ikea Skadis mount for Niimbot D110_M label printer. It differs from the D110 mount for the charging port position. It is possible to access the power button, print, and charge while on the stand. Printed vertical with supports in PLA, 15%…
A purpose-built stand holder for the Superlux D112C bullet/harmonica microphone. It lets this handheld microphone screw onto a compatible M10-threaded microphone stand or stand stud and includes two fixed-angle versions: • 45° version •…
I wanted to keep some additional rolls of labels with the Niimbot D11H, but I didn't want to use Gridfinity. So I made an inlay for the original box. I was inspired by this one: You can keep 4 rolls and the USB charging cable.
If you're restoring or repairing a Minolta XD7/XD11, you might need to remove the film indicator window in order to better replace the original grips/leatherette. This involves cutting the plastic nubs that go through the door, as the…
This is a Gridfinity-compatible holder for the Niimbot D11 label printer. The model comes in two sizes: 3.5×1 (because my grid have 0,5 cells on the edge) 4×1 (standard) so you can choose what fits your Gridfinity setup best. The holder…
Requires a 1/4 20 screw and M3 Socket head with nut to fit to the camera. Since I used the strap lug to secure the grip I replaced it with two standard size camera strap triangles that allow a camera strap to be fixed to the grip side of…
I bought a cheap Fichero Labelprinter at our local Action store after reddit user OilTechnical3488 reversed its Bluetooth protocol and published a web-app to control without a privacy invading app. Since the original packaging has a lot…
Jednoduchý držák optického snímače průtoku vody. Je potřeba jen šroubek M3. Kontakty snímače jsem zatavil tavnou pistolí a připojil k ESP32 stíněnou dvojlinkou. ESP měří analogovou hodnotu na jednom jádře a druhé zasílá data přes WiFi. Na…
A remix that allows the Niimbot D11 label printer to be stored on the Honeycomb Storage Wall
I wanted to put my D11 into a rugged case so this is the insert to make that happen.
Includes files for wall mounted and desktop version. Wall mount holes 40mm spacing. No supports needed, print on base as pictured.
Remix of the Terminal for SSD1106 1.3'' OLED to make it shorter and to remove the internal structures
Replacement for GV-EFD1100 IP dome camera. Tabs broke off the original. Used a heat gun to pop the polycarb dome out. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Category: Camera
Fully modeled Lego set D11 bulldozer - 42131 Buy the original set here -> Amazon Link
Print however, I did 20% with 2 walls and it hasn't broken yet.
you can buy it here: https://s.click.aliexpress.com/e/_c31yqiBp
For 21x15mm and 15x10mm switches, which have many names and usually starts with KCD*. Instead of using fasteners, glue, friction, compliant mechanism, etc. to bond the two parts, the walls slightly heated up and bent inwards. You can do…
Jednoduchý držák optického snímače průtoku vody. Je potřeba jen šroubek M3. Kontakty snímače jsem zatavil tavnou pistolí a připojil k ESP32 stíněnou dvojlinkou. ESP měří analogovou hodnotu na jednom jádře a druhé zasílá data přes WiFi. Na…
I am a renter and my landlord would have a fit if I drilled a hole to mount a doorbell camera. So this one is a pressure fit that uses the doorbell's hole as an anchor. This is in no way as secure as screwing it in.
KCD11 switch holder for wall mounting. Snap-in, no screws or cable tie needed for assembly. No need to cut the legs of the switch. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable…
Introduction I made this bracket because the spot on my door where the doorbell was is uneven. I have included 2 versions, one with a standoff to the right (mirror if your doorbell is on the left) and one that's flat if you would like to…
Support for Roland kickpad. Since the pad is not fixed onto the rack, it does not stay where it should.
