Counting matching models…
Hose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter. Outer Diameter (OD): Intended for the printed tube to go inside your…
The Polymaker spool adapter is designed to help your cardboard spools print more consistently by reducing friction and creating a structured rolling surface. The spool adapter clips around the face of the Polymaker cardboard spool and is…
This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…
This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…
This adapter system wraps the edges of an ESUN 1kg 199x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ESUN nameplate for…
UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…
Want to reuse toys you already have in a new way. Why not challenge your fantasy by making gigantic bridges and ramps with wooden trains (like Brio or IKEA) with help of simple Duplo bricks. These adapters will make this happen! I got…
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
SIM Adapter Kit Card Simple set of SIM adapters in kit card form. Nano to mini Nano to micro Micro to mini Prints quickly, with no support. Snap out the one you need. Print at 0.16mm (0.2mm initial layer height) for best results. Take…
Adapter folded from two parts to limit the use of supports DeWalt battery adapter You will need: 5x M3 - 15mm screws 2x male connectors and wires
Updates Have a look at the new slim version! Description This is a set of snap-in spool adapters designed for the OpenPrintTag . Some filament brands have oversized inner spool diameters, which makes the OpenPrintTag unable to stick in…
Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…
Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…
Kleine Spulen passen nicht ins AMS. Bambu Lab gibt eine geeignete Spulenbreite von 50-68mm und einen Durchmesser von etwa 200mm an. Kleinere Spulen wie etwa die 250g magicPLA von 3DJake können mit dieser Adapterspule und den passenden…
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
The source marked this model as adult content.
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Use Arachne wall generator or your walls till be too thin and split. If you have issues with the ring being too tight on the spool, you should print the test print I included to measure the hole and contour accuracy of your…
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…
About The Hydra - Universal Spool Adapter is developed specifically for Hydra but will also work well for the standard Bambu Lab AMS. If you use very narrow spools with this however, Hydra will work a lot better as the feeders are tilted…
SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be…
Design I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around. The bracket slides into place, where it holds firmly. Hardware All you'll need are some small screws to…
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
Tired of tangled cables in a messy drawer? This architectural diamond lattice organizer is designed to sit directly on your desktop or workbench, giving every single cable its own dedicated compartment. Instead of standard square boxes…
I received a long-reach prune tool from a family member but they did not have a pole/stick to mount the tool on. I could not find anything that would fit that prune scissor tool, so I made one. Not sure what the brand of prune scissor is…
This little piece of plastic is able to TRANSFORM your AA-batteries to fit into Type-C slots. Its MAGIC!!!! Print instructions -
This adapter system wraps the edges of an OVERTURE 1kg 199x66mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable OVERTURE…
Prints upright with no supports necessary. Two small supports designed into the model. (should pop right out) Adding wires and connectors is up to you. Designed around the M18 Red Lithium batteries that I have. Cannot confirm fitment for…
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
This is a remix, designed from scratch, of the great model created by Billie Palmer . It has the following differences: Made it longer, to better support small spools. Added a long support at the bottom side, which touches the bottom of…
Hi guys, after the disaster of ordering the M2-M3 BoboVR conversion kit today I decided to do a quick and dirty remix this great Quest 3 to Quest 2 Head Strap adapter by HB. (Many Thanks) It's far from perfect. USB cable has to go in back…
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
I have investigated many different ways of adapting the CAMLOCK system to other vacuum hose dimensions, but the variety of diameters and hose types seems to be infinite. Sadly there is no one size fits all approach. In the CAMLOCK system,…
This adapter system wraps the edges of an ELEGOO 1kg 199x64mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ELEGOO nameplate…
Intro With this adapter it is possible to rotate the reel arm of the Ender-3 V3 KE and SE by 90°. As a result, the center of gravity of the filament reel is no longer outside but above the gantry bridge so that the latter is no longer…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
This is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…
This is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…
Tripp Trapp adapter for IKEA TROFAST Mesh storage box. I tested with the french product ( https://www.ikea.com/fr/fr/p/trofast-boite-de-rangement-en-filet-gris-fonce-60518453 ) but it should work with one from any country. The dimensions…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
DISCLAIMER: NEW SUNLU spools may be 1mm smaller in diameter. If your spool measures 194mm please try scaling down the model to 99.5% and print the Left-hand side adapter first and test the fit. Please note that this does not appear to be…
Instructional video is included in the download files. Remove as much of the glue in the first stage of the process. This will make sliding the adapter into the cardboard core easier. Make sure not to jolt or shake the bare filament or…
They're easy, they're cheap and they can be a lot of fun: disposable cameras. If you still got one around, you can remove the plastic lens from the camera housing and print a lens holder for a Sony E-mount camera. All you need is a bit of…
I've remodeled the adapter from scratch because my old adapter ( https://www.printables.com/model/98138-battery-adapter-einhell-power-x-change-general-pur ), that was based on another design, has some issues. You will also need: 2 crimp…
Wanting to use different sources for filament, often with cardboard spools (or refills) I decided early on that I needed a filament rewinder. Not fully satisfied with existing offerings, I made my own. I didn’t want to power it by hand or…
an adapter to perfictly fit 2.5" ssd's or hdd's to 3.5" disk bays
UPDATE: Version 2.1 of this spool adapter has been uploaded. Slight correction to V2 on the retention tabs. This is a Bambu Lab AMS adapted for Polymaker cardboard spools. There is one registration pin to avoid slippage. I honestly do not…
This is a free model. I am not responsible for any damage to your machine. A remix of the Bambu AMS Feeder PFTE Adapter from user ktothestank . All thanks to him. What's new? - The structure that supports the PTFE tube has been reinforced…
Simple adapter to convert a nano SIM card into a standard SIM card. Changelog V1.0 (2023-04-03): First version
Replace the toolhead cable clip with one with M10/M6 thread to fit a reverse bowden system. M10 racor is highly recomended! M6 racor is not recomended because it ads too much drag on the system so the filament do not run smooth. PTFE tube…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Can be used horizontically or vertically. works with 100mm tubes.
simple part to hold two IKEA-Lack tables stacked over one another. No bolting necessary. Print instructions You will need 4 for a stable stack. I print was done in PET-G, 0,2mm layer on a MK3s. Print works well without support. Update…
Adapter to hold 2x 2.5" drives in a single 3.5" bay. Remixed from Tadziurski 's, original design here . 10/19/24- Per requests, I have added a model with the third set of mounting holes for 3.5" bays. I have also added a model with…
Hardware: 4x M3x8mm either sockethead or countersunk screw work. 2x Red spade connectors small length of wire or cable 2part epoxy or other glue XT-60 Connector (the one I used:…
Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…
Bambu Lab Printer X-Y Squareness Check Adaptors to be used with Kent set squares. I will Add more detail when I have time. After any adjustments always run a full calibration. The following is to be preformed after following the Bambu Lab…
CZ: PTFE adaptér pro podavač tiskárny Snapmaker U1 - Bez demontáže originálního krytu podavače - Tisk bez podpor - Tisk bez závitu pro PTFE konektor - Výška vrstvy 0.16mm - Tryska 0.4mm - Čísla vstupů v modelu - Materiál PLA Doporučuji…
Update: 26.05.24 - Remodelled top mount a little to add strength. It's slightly thicker now and I added small fillet (see picture below) to eliminate weak point. All three models have been updated. Enjoy! This adapter is the result of the…
A Gridfinity adapter is nothing more than the bottom mating portion with a flat top surface. This enables you to fasten whatever you want to a Gridfinity system without needing to 3d model anything specific. For example, if you already…
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Update: anbei der Modellink zu thinkercad . Besonders in diesem Sommer hatte ich einige Update- und Remixanfragen zum Modell. Ich will das Modell mit euch teilen, fühlt euch frei es für eure Zwecke zu optimieren. Damit lässt sich die…
NOTICE: INLAND PLA+ spools have recently been reported by several users to be slightly larger. If your spool diameter is greater than 199mm please scale the models to 100.6% and leave a comment if this works for you. I don't have a…
I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…
72mm and 73mm openings should fit most larger spools. Most spools with larger openings have a slightly larger diameter on one side, which is why i have 2 sizes loaded into one print. Added a lip to these so that even if the spool opening…
Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
I really love the Smartphone cases from Quad-Lock and used them allready for the past few years. The only Problem is the Price and the Varaities of the Quad-Lock mounts. So I just 3d-printed my own ;-) The here provided mount perfectly…
This adapter system wraps the edges of a POLYMAKER 1kg cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Notes: I've tested with several POLYMAKER…
These are some butane lighter refill adapters/nozzles. The nozzles that came with the can of butane never fit my lighters quite right, so I made my own. I had the best results when they were printed with a 0.25mm nozzle. Note that there…
My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…
Adapter for lenovo legion go connect
Update 28.11.2024: New better Beta Version with connector. Update 28.04.2024: As requested by a user, i added the first BETA version of the trackholder with connector. Due to the support, the surface is unfortunately not 100% beautiful,…
G17 rail to Picatinny adapter, for when you want to fit a pic rail only item or mount. Gives you 5 slots. Made it as low-profile as possible while still maintaining the correct picatinny dimensions. Fitted for Gen 4, haven't tried on…
REVISION HISTORY 2023-07-19: v1 - Initial release 2023-10-19: v2 - Updated to address the flaws of the original design; now made to be modular. ________________ This is spool adapter for Bambu Lab AMS that can fit a wide range of…
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Why buy multiple filters for all your lenses when you could buy one filter and reuse it for all your lenses. You just need this simple adapter. I've included the two sizes I needed (step-up 49mm to 67mm, step up 43mm to 67mm) which I have…
Printing: No supports needed. This can be printed in a wide variety of materials. Purchase: Also available at kytor.com/store/product/n64-controller-display-stand/ Recommended Materials: PLA MAX Light Gray DURAMIC 3D PLA Plus Black or…
Bambu Lab AMS Spool Adapter for Sunlu 250g filament 27/11/2023: I added some minor changes to reduce the bouncing when winding/rewinding a nearly empty spool. Spool 195mm v12 -------------- I kinda reinvented the wheel. I was surprised I…
Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
Printed to snap on top of the AMS grey feeding ports to help slow down or stop excessive wearing by utilizing a PFTE insert to buffer it in Print on the top edge and snap it into place, will use approx 7mm of PFTE tube inserted inside…
Tested on 3 different cards and 3 different phones. Note: The thinnest part has 0.8mm, consider this to adjust nozzle and line width.
This adapter is designed to be installed on the build plate and left on. It won’t interfere with normal printing and is set up so it won’t dip into the resin. It can be printed on either a fdm printer (i used my K1) or on the mono m7 pro…
I was looking for an adapter, but didn't find a perfect solution for my task. So i've ended up with this remix/ combination of these two items: https://www.thingiverse.com/thing:2122826 https://www.thingiverse.com/thing:62800 Thanks to…
Allows you to charge the AirPods Pro in the Tesla Model 3 wireless charger without slipping :) Works as an MMU print, or single color!
![[OUTDOOR] Prune tool adapter](https://media.printables.com/media/prints/99741c24-799a-48f9-81ad-7d21d16ab37b/images/10230847_aeebb432-ff55-44ad-b7fa-ea2dc29b048a_aa0281ba-a84a-4156-9187-a634c7b9f22d/img_20250713_150546.jpg)
