Counting matching models…
Original Dyson part number 906960-11 Does it differ from the original? Yes, although it's functionally the same. I haven't added those weird ovals around the outlet. I don't think they add much to structural strength. Underside brush is…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant
This Dyson DC19 Hose mount is a Spaceport for repairing your Hose of your Dyson DC19 Vacuum cleaner.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
This holder works well when printed in PLA+ or PETG. There are two screw holes M4 to mount the holder to your wall.
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
Thanks to blueOcean for making this tool mount. I traced it in OnShape and removed the french cleats and added some screws. The charger fits perfectly. Don't mind the multiple colors, I ran out of filament in the middle of the print.…
DC17 Blaster Pistol. Model is sliced into 3 parts for easy printing! For personal use only!
I created this model for a friend, as he didn't like the much simpler wall mounts like this as they utilize the holes of the rubber feet, which have to be removed. And the charger is fixed permanently to the wall and can not be quickly…
This is remix of: https://www.thingiverse.com/thing:4097627 . Please note the natural shrinkage of the material and add 1% in the slicer if your filament shrinks a lot after printing. Enjoy ! Print Settings Printer Brand: Creality…
I designed this holder to attach my charger to the wall. The rubber feet must be removed and the housing screws unscrewed. After that, the holders are placed and screwed in again with 4x40mm or 3,5x40mm countersunk screws with a rough…
DC15A Heavy Blaster. Measures 1.3m long when fully assembled! Model is sliced into 11 parts with keys for easy printing and assembly! For personal use only!
A simple flat mount for the most common Makita chargers on the market, no need to try and line things up like with the single foot models or like the dual tilted ones. This model is easy to print and easy to use. To install charger, screw…
I made these to fit into the little rubber foot holes on my makita chargers. If the holes don't print “EXACTLY” as tight as you need them to on your printer, I would advise using a small amount of masking tape to tighten up the fit. The…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
This is a mount for the Makita DC18RA Battery Charger. It is slightly different in dimension to the DC18RC. This design was heavily inspired by https://www.thingiverse.com/thing:3688254 but is not a remix in that it was created from…
Here is my attempt to make the clone rifle as seen in the shows Andor and Mandalorian season 3. I have done my best to get this as accurate as possible with the limited reference available. This rifle is scaled for 1:1 (life size for…
Made a DC15 Blaster from Star Wars. It's a mix between the A and S model blasters and not 100% screen accurate but very similar still. Hope you like it! For personal use only!
DC17 blasters and holsters based on the animated series and as used by characters like Captain Rex. These are sized at 1:12 scale for customising 6 inch figures, 1:6 scale for 12 inch figures and 1:1 scale for life size props and…
Wall mount for Makita DC18RC battery charger. Requires no modifications to the charger, i.e no need to remove rubber feet, or any screws. Printed in PETG for a little flex and resilience, but PLA/ABS, etc should be fine.
Wall mount of MAKITA batteries charger
After having completed the galactic marine armour, I though it needed just that little bit extra component to finish it. I think this 1.3 meter long DC15/ 15A will just make the Galactic Trooper look perfect ; ) Greeblees and extras on…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
Einen Einbauadapter um den Schappach DC100 zum Zyklonsauger umzubauen , den Adapter in den Sauger innen einsetzen und am besten etwas mit Silikon oder Gummiunterlage unterfüttern damit keine Falschluft angesaugt wird , dann mit…
remixed wall mount to fit Makita DC18RD Replaced plastic screws(original) by 4x50 wood screws Printed in PETG
Printed on its side for strength, this Makita DC18RC battery charger slides into the mount with a solid clunk. The original model did leave some excess tolerances, causing the charger to lift a few millimeters when removing the battery. I…
(Due to issues with Thingiverse this blaster (and the last 2 I uploaded here) did not appear in my Thingiverse profile nor did it sync here to Printables so am uploading directly.) Hi, still a noob 3D modeler here, this is a variant of my…
Flush mounting for Makita DC18SD charger. One of the sides has pin holes that are not straight up and down, so I decided to cant the screwholes relative to the mount, so you end up with the smallest possible mount, but also have vertical…
The DC18SD is slightly smaller than the DC18RC, so this adaptation will fit this model. Insert the top peg at an angle first, and then push in the bottom two support pegs. You may want to add a screw into the pegboard for extra support.…
Makita DC18RC wallmount 2 files (sorry only gcode available) Petg 0.2 / time: 6hr Flex 0.2 / time: 1hr Charger easy to take off, if needed
You need 3 M3x10 or M3x12 Screws and 3 M3 square nuts to screw the parts together. I suggest to first insert the square nuts in the bottom part, than mount the bottom part with 2 6mm countersunk screws at the wall and than screw the upper…
French Cleat - Makita Charger DC18RC Support A French Cleat Support for the Makita Charger DC18RC Designed to fit a plywood French cleat size: ¾" ~ 18mm BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support…
Just a model to use in other models for reference. Uploading Fusion 360 and STL file so you can import it on your design to use for reference. I also added a test plate to print and test on your DC motor to see if it matches the…
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. Movie accurate version of the DC15A rifle to use with 6 and 12 inch figures since Hasbro and Hot Toys continue to not use the movie weapons with their…
Interchangeable mix'n'match swivel variants of the DC15 Commando rifle. Ideal for custom figures or cosplay. This release comes with all the parts to make every variant of my Commando DC15 rifle through a mix and match feature and once…
Dyson DC16 mod to Dewalt 18v battery with electronic mod because original battery is 6 cell 21,6v (see last picture) and the full potential of an 18V battery cannot be used. Electronic mod is very simple just one resistor must be replaced…
A really sturdy Skädis mount for your DC18RC charger. STEP and F3Z files are attached if anyone wants to play with the design, minimise it, enforce it or anything really. I find the current design stable and sturdy without any wiggle room…
Republic commando variant of the DC15A rifle which is often referred to as the DC15 Commando. Ideal for custom figures or cosplay. Comes in standard version for 1:1 scale and also thicker/reinforced version for 1:12 while 1:6 has both…
Update: fixed a void I found in file, standard versions fixed, will upload fixed versions of the chunky files as I get time to do so. Howdy, still a learner at 3D modelling, I have today my attempt to create the DC15 blaster pistol from…
These stands for Makita DC18RC battery chargers has a much higher angle as others around. I use them as stand, but they can also be used as wall-mount. Also, they can be used normally or upside-down. When used as a stand, there is enough…
Still a 3D CAD learner here, here is my take on the Bad Batch Elite Squad Trooper version of the DC15 blaster in realistic style for non stylised figures and cosplay. This is scaled to 1:12 for 6 inch figures, 1:6 for 12 inch figures and…
I love the Makita DC18RA Battery Charger Mount from Casper but I needed a French cleat Version. So I made a remix.
Here are some custom variants of the DC15S blaster from the Andor / Mandalorian season 3 flashbacks. These are the base DC15S carbine as used by the Imperial clones in Andor (and in the Mandalorian order 66 flashbacks) but with the scope…
A 18.52x8 Battery Mount for the Flywoo Firefly 1S Nano Baby Quad V2 DC16/FR16. Print in TPU at 0.2mm and possibly 100% Infill. Printed on a Creality Ender 3 Neo (Bowden) slowly with my special TPU profile. Uses the stock mounting method…
Makita Battery Charger DC10SA & DC10SB: This is a wall mount for the 10,8V or 12V Makita charger similar to the approach of @Jeffeb3 for the 18V charger. It fits with the Makita DC10SA and B. print setting: PETG (but PLA should also work)…
Still a 3D CAD learner here, here is my take on the Bad Batch Elite Squad Trooper version of the DC15 blaster in the animated style of the show. This is scaled to 1:12 for 6 inch figures, 1:6 for 12 inch figures and 1:1 for life size…
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. two more variants of the enhanced version of my movie accurate DC15A rifle with added details that are logically supposed to be there. This time one…
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. Two more variants of the enhanced version of my movie accurate DC15A rifle with added details that are logically supposed to be there. This time one…
UPDATE: loaded revised versions due to the old ones being slightly overscaled UPDATE: Added beefier version for 1:12. Should you wish to sell physical prints of any of my models please contact me. Hi, still a noob 3D modeler here, this is…
UPDATE: revised the scales for accuracy UPDATE: Beefed up the 1:12 blaster sights, trigger guard and stock to prevent print failures. If you have any issue with the 1:6 version just use the beefy 1:12 file scaled to 200%. Here is my total…
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. An enhanced version of my movie accurate DC15A rifle with added details that are logically supposed to be there. The details I added include: Lenses…
This uses the DDD Printable Wall Control System ( github ) creating an angled mount for the Makita DC18RD Battery Charger . 2024/6/22: Update - Version 2. Angle and mounting have been improved - it no longer requires a strap to keep it in…
Based on TJDesign's great models, I have created another version for the Makita double battery charger DC18RD. Left and right holder can be fixed by using slightly longer screws (remove rubber mounts to access screws. I have adjusted the…
Sniper variant of the DC15 Commando. Ideal for custom figures or cosplay. This variant comes with and without stock in both a standard version for 1:1 scale and also a thicker/reinforced version for 1:12 while 1:6 has both versions as…
Fixed stock version of the remake of my first ever CAD designed blaster: the DC15 “EX” or “experimental” hybrid rifle as seen in the temple march in Revenge of the Sith, this time using my recent DC15A rifle as the basis which hopefully…
Halterung, welche das Ladegerät wirklich sicher an der Wand hält. Mir waren die schon verfügbaren Halterungen nicht fest genug, deshalb habe ich eine eigene Halterung entworfen. Diese arbeitet nach dem Prinzip eines Dübels und hält somit…
My own custom design dual barrel version of the remake of my first ever CAD designed blaster: the DC15 “EX” or “experimental” hybrid rifle as seen in the temple march in Revenge of the Sith, this time using my recent DC15A rifle as the…
We sell printed units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl Keep your workspace tidy with Makita wall mount for charger DC18SF. I print them with PETG; 6 wall; 6 top/bottom; 25% Gyroid…
Howdy, still a learner at 3D modelling, I have today my attempt to create the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This version has a more practical trigger guard than the video game accurate version that…
Still a 3D CAD learner here, here is a modification of my first blaster 3D model: the DC15-X, this time modified to resemble the Elite Squad Trooper blaster from the Bad Batch. This will be ideal for custom trooper figures where you want…
UPDATE: Loaded revised versions to address scale issue UPDATE: Added a very beefed up version so trigger guard will print better in 1:12 Should you wish to sell physical prints of any of my models please contact me. Hi, still a noob 3D…
UPDATE: Revised scale UPDATE: Replaced the 1:12 version with a beefed up one so it has thicker trigger guard and thickened stock, also added beefy 1:6 version too. Hi, still a noob 3D modeler here, this is my first blaster! The DC15…
This model does not fit DC18RC Pull out rubber feet from the bottom of the charger and mount brackets into holes. To mount brackets you'll need both T-Nuts and alignment guides, which you can find here:…
Passend zu den erstellten Wandhalterungen eine Erweiterung für das Ladegerät DC18RC von Markita. Die Gummipuffer und die dahinterliegenden Schrauben wurden entfernt und durch Blechschrauben 4,5x40mm für die Montage ersetzt. Hierzu ist…
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. Another variant of the DC15A rifle from Revenge of the Sith: The AT-RT driver rifle as seen in the official art used on figure packaging and more. Now…
Makita charger DC18SH wall mount simpel is a wall mount for your charger. Remove rubber feet, and push the hoder i place. You kan just let it hang or remove the skrew and put a new through the mount. Its pre-drilled. Print Settings…
Holder for Makita DC18SD charger. mounts with 4 screws. the charger can be taken on and off without tools.
This allows you to replace the Dyson DC16's battery with a Milwaukee M18 battery. It uses an injection-molded battery cradle for better fit to the M18 battery, and requires a few simple modifications to the vacuum cleaner. Tear down your…
UPDATE AGAIN: loaded revised versions to correct scale UPDATE: replaced 1:12 file with beefed up version. Added option for 1:6. If you are hoping to sell physical prints of any of my models please contact me. Hi, still a noob 3D modeler…
Makita DC18RA 18v Battery Charger Mount for IKEA SKÅDIS System This is a Makita DC18RA 18v Battery Charger Mount that attaches to the SKÅDIS pegboard with printed M2.5 T-Nuts from 6d6178 . (See their collection of T-Nut mounted parts…
I was missing mounting options for my Makita DC18RC charger using openGrid . So, I took inspiration from existing wall mounts and designed these brackets, which work with openGrid using Multiconnect. This mount uses 7x5 openGrid tiles and…
Something to safely wall mount my spare Makita 12v Charger DC10SB using command strips in a more handy location. Includes files for both sets of mounting holes, short with the cord at the bottom. And long with the cord at the side. Note:…
On the Scheppach DC100 the inlet blows straight onto the motor assembly and clogs up the filter. I wanted to change the direction of the inflowing air to get some cycloidal action going. Angling the 100mm hose would require a much bigger…
Remake of my first ever CAD designed blaster: the DC15 “EX” or “experimental” hybrid rifle as seen in the temple march in Revenge of the Sith, this time using my recent DC15A rifle as the basis which hopefully makes it more accurate and…
Small brackets to mount a Makita DC18SD charger to a wall. Do this one by one for each mountingbracket remove the rubber You need to remove the original case screws put the bracket replace the original screw with a 4mm x 50mm countersunk…
Howdy, still a learner at 3D modelling, I have today my attempt to create a shortened more pistol like variant of the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This is my own design using the game blaster…
I made an insert for this box that help my NIIMBOT DC110 and two rolls of sticker and also the usb charger
2 models, one with big hole round battery, and one with slightly smaller hole.
Adapter to connect a HT Pipe DN 50 to Scheppach DC 100 (Parkside PASA 1200) or similar. Prints without support.
Our Dyson DC14 upright took a bit of a tumble and the cord retaining arm broke. This replacement part is a fairly easy print (there are supports) and an easy repair. Disassembly/Repair: Use a spudger (or sharp edge) to pop the gray center…
Description This bracket allows you to mount a Makita 18v battery charger (DC18RC) on the wall to get it off the shelf/workbench. It includes cutouts to allow air to get to the vent on the back of the charger and circulate under the…
Bracket for Makita Charger DC18RC for mounting on IKEA Skadis pegboard (Might fit other charger models also) Use the original Makita charger rubber grommets on the bracket. These will hold the charger in place, but you may also detach it…
I printed these vertically with supports (grid) so that it is stronger. The first time I printed it laying flat, but the round nubs broke off very easily. In addition to this you need the std_base_hook_mini.stl from @TJDesign.
Print on the side. Support for the pins are a must, for the holes it isn't necessary. The holes for the anchor screws are 3.7mm, meant for 6mm Fischer wall plugs (Drywall or brick)
Best print with PETG: stronger and temperature resistant compared to PLA. Print vertically as shown on image, supports needed. I used to have this model, but after some time charger started to fall out, so introduced "full encasement"…
I had a few complaints that the chargers could come apart from the wall, shearing on 3D printed pins. The update model is slightly thicker, but most importantly now uses a screw to hold the Battery charger casing to the charger. You'll…
Howdy, still a learner at 3D modelling, I have today my attempt to create a shortened more pistol like variant of the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This is my own design using the game blaster…
UPDATE 3: revised the scale of all 3 as they were slightly off. UPDATE 2: replaced 1:1 with revised version UPDATE: Replaced the 1:12 file with a beefier version and added a beefier version of the 1:6 one. Hopefully all parts such as…
A drill guide for installing the Makita Battery Charger DC18RC wall mount . I made this from quick measurements of the wall mount while attached to the charger. For me it turned out a bit of a tight fit for the lower studs, so please…
A mount for the Fly SB2040 v3 Pro LDC1612 sensor for the Chaotic CNC Tap As Klipper currently doesn't support endstops via Eddy.
A remix of the Makita DC10WA Charger Holder on thingiverse https://www.thingiverse.com/thing:5792482/files to use the Skadis/ SKÅDIS universal peg https://www.printables.com/model/635620-skadis-skadis-universal-peg
Einfacher schneller Adapter um an einen DC100 von Scheppach, ein HT Rohr anzuschließen, da mich auf meinem YT Channel jemand danach fragte. Ich habe es anders gelöst, deshalb nicht gedruckt. Sollte aber passen. Ansonsten die Parameter in…
Here is my total noob attempt to make the DC15-S from Star Wars. I have a 1:1 version for Cosplay use and then a more reinforced version with smooth sights for printing in miniature scaled to both 1:12 and 1:6 for custom action figures. I…
Howdy, still a learner at 3D modelling, I have today my attempt to create the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005, though this time minus the stock attachment to make it more pistol-like. I previously…
A remix of a wall mount for the DC10SB and DC10SA charger with added screw holes for mounting. Yes the holes are not symmetrical, that is because it was needed in my situation and totally not because I made it by plonking down two cones…
Wall mount brackets for the Makita single battery slow charger [DC18SD] and the quick charger [DC18RC]. Each mount is in two parts and there is a slight difference between the slow and quick chargers. Each mount needs five wood screws to…
This model adapts the Dyson DC14 Turbo Tool (~2006) to the Dyson Ball Animal 3 (UP30 - 2022). Snaps into place via the retention clips on the Turbo Tool and the Dyson Ball Animal 3, respectively. Use supports for recessed tube and cuff…
Non canon custom variant of my DC15A I call shorty. Ideal for custom figures. Comes in standard version for 1:1 and thicker trigger guard version for 1:12/ 1:6 has both versions. Let me know how you get on printing these and other items I…
Print with supports
This Adapter screws in place of the original inlet with the original screws and without any other modifications necessary. It provides a decent cyclone effect to reduce clogging of the filter. Additionally it reduces the inlet to fit…
