128 models
I recently fell in love with the Honeycomb Storage Wall (HSW) but couldn't find a good generic bucket to keep items in. The shelves weren't deep enough and the cups were too deep. The HSW bucket-shelf was exactly what I wanted but…
NO MORE TIGHT THREADS! Threads have been fixed like they were on the Original Stash Jar and Shorty Stash Jar. Original model at thangs.com: https://social.thangs.com/m/839632 Category: Household
Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! Also to Alvomane for his variation . My changes make the lip a little deeper and thicken the lid a bit. I felt a more satisfying close this way.
Remixed @ RAMServices1959 from Thingiverse to make it slightly deeper to allow for purge waste to fit in for longer prints. Doesn't need supports to print. if having trouble fitting on the print bed in Bambu slicer right click on the…
This is a deeper tray that fits the bottom slot of the 3-part storage box. The cut-outs only make it fit the bottom-most position. It will not fit in another slot! I personally use it for tools and parts that I don't need that often. The…
Remake of https://www.printables.com/model/374659-lego-head-hitchcover with deeper hole ( cca. 80 mm ) Use supports.
This is a remix of the Pop-up credit card wallet by Mike. I wanted more storage and space in the back part of the wallet but couldn't find a remix or alternative for it, so I made my own. The files contain just the back panel, the only…
This is a remix of a remix! I liked the raised front lip of the Honeycomb Wall Shelf remix by JRosello but wanted one deeper, approximately 100mm deep… so I remixed it. Nothing special regarding printing, I used white PLA+. Make sure it…
A simple Tinkercad-remix of RostaP's shelf #2 that I created to fit the Tello G1CH battery charging hub and other that require just a tiny bit more depth. I didn't change/fix anything; the model has the same bridging on the second layer…
Needed a deeper drawer version of the under desk drawer with handle by @Paul_318082. Still fits the same rails, so it can be used alongside his other drawers. Sizes: 20mm deeper version of the grid base drawer with handle. 20mm deeper…
This is a remix of the Sky Team board game storage tray components shared by Kali and crzisme on Printables. The tray is now deeper to handle all of the available airports (base game, Turbulence expansion, PnP downloadable airports from…
Deeper fishfinder holder for holding the Deeper Chirp+2 and make your own attachment for your needs.
The problem The original Spool-holder-R causes some filament spools to scratch against the door when the extruder pulls on the filament, causing visible scratch damage to the door. When the air filtration fan is on, this intermittent…
I printed this set with .2mm fuzzy skin but it looks great with or without. Any tealights should work really but here's the ones pictured: https://www.amazon.com/dp/B0799G5W6Y?psc=1&ref=ppx_yo2ov_dt_b_product_details PLA. No supports…
I wanted a slightly deeper drawer to hold my extra in-spool desiccant containers. UPDATE: Now includes a Gridfinity version. The pull is still at the bottom of this as movingit to the top would risk breaking the front off. Final depth is…
deeper lid for https://www.printables.com/model/58796-308-ammo-box
Best printed at 150%! Technically, it was directly derived from the original ( https://www.thingiverse.com/thing:2533058 ) , but this one gave me the idea. I removed the center shaft altogether to make the pockets as deep as possible.…
This is a remix of the Voron 2.4 exhaust filter housing . I modified it so it would fit this canister for a Roomba 8xx/9xx HEPA filter. The original housing just isn't deep enough. Getting the canister in is easy, to get it out you may…
Remix of DevNull8's bumper. My version has the records sit 15mm deeper on the shelf which seems to work better if you use outer sleeves. I also added a slant to the front of the underside of the bumper to help with sliding storage bins in…
I remixed the original holder with some deeper cutouts so that you can more easily grab an exact number of coasters.
These Files only contain 2 remix objects of the beautiful War of the Ring quick setup inserts by WerfWerf . You will still need to download and print the components of the original insert except for the model downloaded from here. This…
Just minor modifications and deepened blade slot like the latest prusa design.
I had an issue with the original side spool system's pulley... larger retractions or print head movements would sometimes cause the filament to pop off of the pulley and get jammed on the filament sensor. I modified it to have 9mm sides…
This is a remix of @OndrejH_131436 deeper tray that fits the bottom slot of Prusa Guys 3-part storage core one side storage. I have added a cutoutcutout to make access from the front easier when other trays are above, limiting easy access…
This is a custom-designed mount to securely attach your Deeper Sonar (Pro+ or CHIRP+) to the FLTB-5 float tube. Fishing with a Deeper on a float tube can be tricky without a dedicated arm. This mount is designed to be compact, sturdy, and…
this is the tinker cad cave that is modified so it is bigger and deeper and is deeper than my v1 of the cave and will print better too
I loved both ideas, did not want to choose one or the other so I did what I could and made this small remix so I can profit of the best of both worlds ! Deeper and with magnets ! You can easily change magnet size if needed.
Remix of Flascherl's blade box to be just a bit deeper and store metal cutting blades.
Printed with supports everywhere with .1 layer height, .2 initial layer.
This is a deeper model that I just made. It has a slanted floor to hold your glasses to the rear. You can put your glasses or coins in here to keep them in place. The side with more depth goes towards the shifter. I put a thin piece of…
I had and old bmg extruder and wanted a updated the extruder for my modified ender 3 max but it was using a different pom gear that had that extra plastic lip so modify the model to fit that.
Love this drawer system but I needed slightly deeper drawers for my paint pots.
Found the original carrier to tight to fit the led in with 6 wires so made it slightly deeper
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
my Space Mouse needed some extra S P A C E so I remixed the remix by Brent to have additional 20mm
I'm a big fan of the Benq Monitor lights as they offer a simple genius light for your desk. Unfortunately I couldn't use it stock on either of my workspaces without modifications. You can now benefit from my struggles ;D This adapter…
This is a big and deep cave if you want to you can modify this and make it bigger wherever you want to, I suggest tinker cad and import it to tinker cad and make it how you want it. Version 2 of this is now out this one is deeper and…
When I was sourcing parts to build a meshtastic device this pack of batteries was cheaper than other options with fast shipping. The problem was these batteries appear to be thicker than others and did not fit in an of the cases I found…
Slide in lid to Catan pieces box. Standalone pieces organizer, with addnl height in road sockets so roads won't wobble.
Building on the great work of @Alpenmeister_111725, I needed some more space in my hitbox for pico I had with headers already soldered on. It also gives it a slightly more chunky look, and a bolder base colour which you may or may not…
Gridfinity bin for CNC Kitchen threaded insert tips and TS100 adapter
This is a small update to one piece of vzom's Harvest Insert (Keymaster 2024 Retail Version) , in order to support more (or perhaps thicker) seed pieces. When I purchased my version of the game in April 2025, I was excited to find vzom's…
Remix with case being 6mm deeper to accommodate the new P(W) series. Printed with back on build plate with support everywhere
taller crush sear that gets deeper into the plunger catching area, might fix your catching issue (it did with mine). tip: make it 10% taller in your slicer. that might also help.
While building my Q-Pack MK3, I found that the retention nuts glued in the sockets of the mounting bracket kept coming loose and stripping the material on the bracket when I bolted the motherboard to the pack. I decided to modify the…
PRIma's NanoVise V2 and clamps work great on my square-edge lack shelf and workbench! To use the vise on my routed edge desktop, the clamps just didn't reach beyond the depth of my routed desktop. I remixed the large PRIma clamp to reach…
Just a deeper version of a Companion Cube Post It holder I found on here. Holds 9 packs of Post It's. All creative credit goes to the original designer.
While building my Q-Pack MK3, I found that the retention nuts glued in the sockets of the mounting bracket kept coming loose and stripping the material on the bracket when I bolted the motherboard to the pack. I decided to modify the…
I could not find M3x16 bolts at my hardware store, so I bought a bunch of M3x15. They turned out to be too small. Rather than going to another hardware store and buy another box of bolts, I modified the 3D model. I also added sacrificial…
all instructions for assembly can be found here https://www.printables.com/model/920992-creality-k1c-k1-front-chain-riser-12mm ^ That is the original creator and i only made some small edits that i found helpful for my use case YOU may…
Remix of @Wolfgangs gridfinity-bit-holder-3x1 but bits can be put deeper and there is a groove for a bitholder
My first ever 3D model work! Super fun to learn with! I added 6mm to the cash clip area (top and middle models) but left the location of the cash clip the same. It can now hold my glasses lens cloth, insurance cards, and other…
Same as Brolin Workshop's design, just with deeper countersink holes to allow for a wider range of M5 screw lengths.
40mm Fan guard deeper to avoid touching the fan blade. Prevent fan blades caching on the fan guard. The fan finger guards are a remix of := 40mm Fan Cover by Benji_101 on Thingiverse: https://www.thingiverse.com/thing:4305874 If you use…
While building my Q-Pack MK3, I found that the retention nuts glued in the sockets of the mounting bracket kept coming loose and stripping the material on the bracket when I bolted the motherboard to the pack. I decided to modify the…
A 1U ventilated open shelf for 10" racks with extended brackets to accommodate deeper rack enclosures. Designed for the DeskPi RackMate T2 and any rack with a 260 mm depth, if the standard shelf doesn't quite reach, this one will. The…
I recut the post to fit my keyboard better. If the original is too tight, you might try this.
The exact same model except a little bit deeper. The deadbolt is a Weiser lock if that makes a difference.
Remix of tchimmy's external trays for the deep bins. I had a dice set that didn't fit, You can see the original design in yellow compared to the remix in orange. The D20 measures 29.5mm at it's widest point. Replaced the D4 pyramid…
deeper inset to fit BLawl's shrunk down hueforge prints. Follow their instructions
Protective box for Deeper sonar Ochraný box pro sonar Deeper
Modified the wheels to have deeper grooves so the string won't fall off when setting it up and during operation.
This remix adds about 10mm to the mount so the front end sits further away from the wall. I'm using the F104 tires and they're thicker (taller) than the printable tires which made the original mount too narrow and the back tires were…
Remixed from LSDigi's Robocup to 6oz Flat White Cup Adapter, I only extended the part that sinks in to the Robocup to make it less likely for the adapter to come out when you pull your cup out of it. A solution to the adapter coming out…
Please see Wheim's original model for a detailed description of the model and its design: https://www.printables.com/model/432213-drinkmate-bottle-dryer-and-wall-storage-solution Also note that this remix is intended to be affixed to the…
Grippy potentiometer knob Standard 6mm diameter Hole is 18mm deep with a wide groove to cover fixing nut Based of @BastienX8 Grippy potentiometer knobs
Even Deeper Regrets (Kickstarter Edition) Insert For Non Sleeved Cards No Lid Lift What to Print: (x1) EDR_BadFish-KS+RegretInlandDink_x1 (x1) EDR_SeaFish_x1 (x1) EDR_Clout_x1 (x2) EDR_BadFish-KS+RegretInlandDink_x1 Print Settings 0.4mm…
When I first printed the nameplate with color change, the first layer was not enough to hide the color behind from bleeding through. I deepened the recess of the letters to get at least 4 layers of the first color on before the DELACK…
A simple adapter for the lazy Susan design that allows you to use Sunlu and other deeper spools. Print small side down with supports. I used PETG but there is tolerance for other filaments, it is a push fit onto the original lazy Susan…
It's a deeper (or higher?) box and two additional inserts for a charger, more tips and heat insert accessories. Also added "stops" at the hinges so the lid stays nice and parallel when opened. The bigger insert is designed to specifically…
The Heart Bowl V2 is an enhanced version featuring increased height and a refined look. With Fuzzy Skin enabled , the bowl gains a soft, velvety texture that adds a premium feel – perfect as a decorative tray or stylish organizer. ✔…
This is a very simple set of card holders for the Even Deeper Regrets expansion for the Deep Regrets board game. I don't have a project for the base game as I used a non-free design from another site which I am happy with. What do you…
Who has 2.5mm Cap Hat screws lying around? Well, I don't! So I modified this awesome design from Jeepers01 to be a little (0.7mm) deeper on the inside so that the Pi with the NVDAC can fit and the connectors align properly. The downside…
a deeper verision of the modular boxes
I liked the idea but needed a bit more depth on the blocks to avoid wrecking my hot end. increased the depth to 57.75mm for my longer nozzle.
Modified lid to close with 25mm long bits (like parkside bits, in my case). On the left of the case is the original, on the right is my version. Second photo is the original, with my bits inside, the third is my version.
Adapter for diamond hole saw for deeper drilling in soft air concrete blocks - 33mm Lux-Tools Can be mounted by 12mm socket wrench or mounted on threaded M6 rod for easier start of drilling. Extend the rod to the front of the diamond…
Steep and deep hook for your MFT3, to hand onto it whatever you need, from a trash bag to your hearing protection. Nothing will come off. Slides easily onto the Festool MFT3 side rail. Enjoy and posting a make of your print would be…
Designed to sit/glued on the floor of the rc boat
A deeper version of the great Twin Cupholder. This one goes all the way to the bottom in the Mercedes and won't fall out.
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
This is a deeper tray that fits the bottom slot of the 3-part storage box. The cut-outs only make it fit the bottom-most position. It will not fit in another slot! I personally use it for tools and parts that I don't need that often. The…
This is a remix of SamK3D’s “Rugged Box for Monopoly Deal” . The original design is excellent, but I found the base was not deep enough for newer Monopoly Deal editions (110 cards) , including the Quick Reference cards , and the hinge…
This is a custom-designed mount to securely attach your Deeper Sonar (Pro+ or CHIRP+) to the FLTB-5 float tube. Fishing with a Deeper on a float tube can be tricky without a dedicated arm. This mount is designed to be compact, sturdy, and…
This is just the case for the deeper double drawer, but it has the quick lock slot in it rather than the legacy version.
A deeper version of the great Twin Cupholder. This one goes all the way to the bottom in the Mercedes and won't fall out.
This is my newest 2D circle puzzle! I made this design a few months ago and forgot about it, and printing it turned out really well! It is a bit loose, so i would recommend turning it while it is on a table or desk. No supports are…
This is a remixed version with the pockets extended 40mm to allow the doors to be pocketed deeper into the enclosure, sticking out less. It now sticks out just past the door handle, so that an adequate grip can still occur when pulling…
I recreated the original model for parametric. I try my best, but it is my first try. So if it has problem please tell me, or if you make it better share with the community.
I would print this in the final orientation of the part on the wall, with supports at a 0.16-layer height.
I needed a gridfinity case to hold firstgizmo's spool holder . The 5x4x12U box by suit was perfect but the lid needed to be a little deeper. This was acheived by removing the gridfinity grid from the lid and adding 2mm of extra depth.
A simple clip to hold the wifi antenna to the deeper connect pico. There are 2 versions: one just for the antenna and another with a cable clip on the other side Prints in the photos are TPU @ 2mm layer height printed on Bambu P1P, I used…
The Same thing as the original Honeycomb Phone holder, just with a bit more space since my S23 Ultra with a case did not fit.
Extended the length to accommodate for jacket with deeper pockets
