Counting matching models…
A 1:12 and 1:48 scale Helldiver miniature! This model is 1 of 20 poses available in the full set of miniatures currently available on the Galactic Armory Patreon until June 1st 2024: https://patreon.com/galacticarmory The full set is also…
I pulled the 3d model from the game and started modeling it, because nobody should have to pay for 3d models here it is, in its unfished glory! A few more edits will be coming, however if someone can get this version to print (I'm getting…
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
To redirect the filament waste downwards The waste diverter should be printed from ABS, ASA or HIPS otherwise the hot filament waste can get stuck in the diverter -------------------------------- Der Abfall Umlenker sollte aus ABS, ASA…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
Spread managed democracy across the galaxy and display your allegiance with this Helldiver Dogtag approved for FREE download from the Super Earth Ministry of Truth. The SELLING of this print is NOT APPROVED by the MINISTRY OF ARMED FORCES…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…
Hinged Cable Clip V2 Now Available ! Hinged Cable Clip Divided Is your absence of cable management scaring away your relatives and causing turmoil in your relationships with others? I can't help you with that… but this might… Behold the…
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…
Parametric Model Maker: I’ve created a parametric version of this model using the Parametric Model Maker, offering an even simpler way to customise the length to your needs without any 3D editing software. Give it a try here:…
This is a home decor model, it is a divine and mortal statue that can be also gifted to someone. I am not the original owner, this model is a remix. The original photo has been kept because the changes aren't visual, they are for the…
This adjustable set of drawer dividers comes in two heights, 50mm and 70mm, and various lengths from 200 to 520mm. For one divider you have to print two "HxL_TWall.stl" and one "HxL_Connector.stl" file of the same height. The first number…
I have found some hard edges that were supposed to be smooth V1.1 addresses most of that. If I find time, I will try to fix the air intake holes, there are many broken triangles hiding inside I have it printed! Scaling it to 1000% was a…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
The Model is scaled to MY head. You will need to make your own measurements and scale it to yours. I have a big head so you have been warned. The parts have non manifold edges you will have to right click them and repair them in the…
With this model you can easil print your own name tag and attach it to your glass or mug. Ideal for any party or wedding. No more mixing up drinks. Ideal for seating arrangement. Customizing Nametag If you haven’t Fusion360 you can open…
This is the 2019 Bugatti Divo, a mid-engine French track car that replaces the Bugatti Chiron. This was modeled using Blender 2.79 over about 70 hours. I will soon be adding files optimized for scale 3d printing. I'm still new to this, so…
Eagle back from the nest! Help spread managed democracy throughout the stars, by printing out and assembling this model kit! Based on the Eagle multirole fighter from the video game Helldivers 2 . A fairly detailed model compared to past…
Also uploaded my 2 x 1 size inserts: https://www.printables.com/model/672541-gridfinity-1-x-2-size-inserts-can-be-closed-indivi [Update 2024.01.01] Added new parts upon request: 1 x 1 x 4, 1 x 1 x 6 and 1 x 1 x 8 Gridfinity inserts with…
Helldivers skin adapted to Dummy 13 frame. The original Dummy 13 frame is required, with these changes: print two more “frame clavicle v3”. replace the “frame neck” with the “short frame neck” version. replace the “frame hips” with the…
This is a from-the-ground-up reimplementation of Zack Freedman's divided Gridfinity boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you can…
A modular drawer divider system that joins the esthetics of 3D printing and woodworking. 3D-Printed parts All printed parts can be customized to meet your dimensions with the parametric ModularDrawerDivider.f3d file in Fusion360.…
This print consists of three main components: White base plate, blue insert and black frame. While using Prusa Slicer 2.6.1 or later this leads you to the PS feature: "Add part → text". For German license plates (Kennzeichen,…
Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source file: https://a360.co/3vbu9B5 These are perfect for storing small parts and long,…
Now you have individual parts to print and assemble. Follow Crazy Creo and me for more designs, and post makes of this master piece that creo made. :)
Dividers for stock factory Milwaukee Packout Deep Bins; divides bins into halves or quarters.
BD-1 parts kit from fixumdude separated into individual parts files for convenience. Image from https://starwars.fandom.com/wiki/BD-1
This is the second iteration of my Bile Titan print from Helldivers 2
NOTE: If you need even more organization, you can print the “ Any Size Hanging Trays for "Modular Drawer Dividers" (Parametric ) ” to provide even more space for your stuff! These trays work great for utilizing the unused vertical space!…
video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…
Plaque for the 500kg Bomb stratagem UPDATE: 3/4/2024: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
I designed this deep sea diver helmet from scratch on Shapr3D. It is not an exact copy of any particular helmet but elements taken from several different ones. It is a detailed model and best printed on an SLA (resin printer). Could be…
I've made 25 different sizes, so hopefully you will find the one perfect for you.
I loved the original dog tag so made a variation on the theme using the Hell Commander rank badge. Printed on a Bambu Lab P1S with the 0.08mm extra fine setting, iron top layers.
I found this helped keep my Skadis Containers slightly more organised and stopped tall items falling out
I don't like to throw all of my utensils into one big container, so I've designed this internal divider for the Ikea ORDNING utensils holder. It's designed to snap into place (the upper part has a lip that grips the edge). There's also a…
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
This model is outdated, see the new version here https://www.printables.com/model/1165651-scuba-diver Making of This diver was a request by a friend of mine. It was given to him by his late father and wanted a copy of it that he could 3D…
Please checkout my other free designs at https://makerworld.com/en/@Westly Description Attached you will find several card storage dividers that fit standard BCW long boxes, Multi row boxes, and MTG Fat Packs / Pokemon Elite Trainer…
Collection of 29 Helldiver helmets that were pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for printing. These files may contain errors, and require…
This Collection was pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for printing. These files may contain errors, and require editing. Dropship, Commie…
The original model from @sraj had these both sizes of boxes, but the biggest one was presented only with internal dividers. I needed it without the divider, so I needed to remix it for myself. Boxes are simple, versatile and perfectly…
It holds 120+ standard-sized double-sleeved trading cards (i.e. Magic the Gathering or Pokemon) and includes dividers and an optional TPU seal. I seized the box based on Dragon Shield sleeves. No support or brimm required. Requires 6…
This full-size acoustic violin is an improved version of the model by Woody that I remixed/modded according to the real violin specs from MakingTheViolin.com (original small-size model here ). Some parts are adjusted or remixed, while…
I have created a simple CAD model of the P - 2 Peacemaker This is my first model in this direction, so I don't have a lot of experience yet I would be very happy about feedback as I said I don't have much experience yet and if there are…
Highly customizable drawer dividers, works not only for IKEA Alex Drawer Units created by Ralf Meier
For Democracy! Charger with Behemoth var, Hunter and the dreaded Stalker! This Collection was pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-09-29 - Replaced the 1x3x3u x5 bin which wouldn't slice properly 2023-02-04 - Original post using the Gridfinity v5 spec Also see my other…
Autocannon, Flamethrower, Autoshotgun, Pistol, LAS-5 Scythe and the Strategem Ball!
Needed a way to start better organizing my MTG collection and separating decks within boxes. These dividers make it super simple to just segment things, and visually (clearly) see what chunk of cards is “below” the divider (once you apply…
A vase with organic curvature inspired by the shape of a female figure.
Be careful when removing supports on the right arm, it is sort of weak and can break easily.
now you can make the best gun in the game. uses a 1/4 in dowel as support .may need sanding and gluing. Category: Props
Description: Basic labeled dividers for organizing records, or other things. I included two sets of dividers, one contains a notch (works great on the IKEA Kallax shelves) to keep the dividers from sliding in too far. The other set does…
Description Helldiver remix using Dummy 13 version 1.0 frame. Much more poseable than the first version and accessories included. Printing: For the frame parts, print with ABS/ASA/PETG. Do not print the frame with PLA. 0.4mm nozzle, layer…
Re-posting of Yawghmoth's card dividers plus a colorless one I designed to match.
UPDATE (Mar 3, 2025): Added a divider for the long bin of the Milwaukee Packout Low-Profile Organizer I wasn't satisfied with the existing models that I've tried for the Milwaukee Packout Low-Profile Organizer : some were too thick; some…
I only use this for the top drawer of my ALEX Drawer Unit, where I have all the tools I regularly use. It is much more fun when you always have all the tools at hand and do not have to constantly rummage for them. You can scale the rails…
Divide your boxes to sort different pieces. NEW! obj. file included
Update released! Includes Maxi box (⅔ of the Trofast drawer). Set of drawer divider/inserts for IKEA Trofast - you can mix and match them however you want. Originally designed for LEGO (and hence big fillets at the bottom making it easy…
Description in English below Update 20.06.25 Kiste ohne Ausnehmungen hinzugefügt Update 08.05.25 Wieselburger Logos hinzugefügt Update 07.04.25 Griffe und Stopper für Montage mit Zylinderkopfschrauben M3x14 oder M3x15…
When I first put this model up here on Thingyverse, I had know idea how to improve on it further. I'm thankful that over the past year I have gained just enough knowledge to see it come to life excatly as I'd hoped and invisioned it would…
Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…
Helldivers 2-Fanart bust Personal fanart work from the game Helldivers 2 There were some deviations when making the model, so I just made it an original armor. But still democracy. Due to different printing environments, the finished…
I created this months ago after not liking the proportions of the available tops. I like the look and feel of this much more and the parts are separate for painting/multiple colors. There is a small flat side on the back of the top so it…
I remixed the popular "Yet Another Trofast Box" design to include more dividers, as I needed a better storage solution for my son's LEGO collection. These extra dividers will help you organize and separate various items within your IKEA…
Wanted to make a helldivers cosplay for comic con, found this great model by ZerekMasters that looked perfect. However it had some problems like too many polygons and other misc. errors. Fixed the models up in OrcaSlicer and sliced them…
Updated 25.08.2025 Added new STLs for trays with double heights. with more room for bricks! Added 8-split 12-split and 16-split for smaller bricks. Remixed the original tray for smaller amounts of parts. 2-split, 3-split, 4-split, 6-split…
Remix of Nodashi's Battery Holder. Recreated the work Nadashi had posted as individual objects with a T connector. CR2032 coin battery acts as an arcade coin return. Files cover the following batteries: AA, AAA, D, C, CR17345, & CR2032 T…
Making of This diver was a request by a friend of mine. It was given to him by his late father and wanted a copy of it that he could 3D print. I first dusted the original (shiny black) plastic with the dirt by my door and set up a…
Help keep your Pokemon TCG cards organized, especially when it comes to your energy cards and/or bulk! These multi-color print dividers are the general size of a Pokemon card with a tab to help make it easy to see and get to the different…
I think this is the most needed upgrade for Elegoo Centauri Carbon as it is louder than other printers , especially when printing starts. While this model looked promising, I wanted to avoid support as much as possible. After spending…
These bin inserts are for the Akro-Mils small parts organizer to allow storage of a larger variety of small parts without worrying about them working their way under the dividers included with the storage system. Step files included for…
Second iteration of my Charger sculpt from Helldivers 2
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Dividers for the IKEA Boaxel wire baskets. The design has holes, so the dividers can be fixed in place with cable ties. Additionally the design comes with a sliding mechanism so that the individual halves can easily be printed on a Prusa…
Check out this Remix by Kinexus A stackable TCG drawer with dividers. Uses about 350g filament , and stores 400+ penny sleeved cards. How to print : Print the Drawer flat onto the bed. Print the Drawer Base with the opening upright. Might…
Lots of different divider options to choose from. Pick the one that best fits your needs! __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about…
Divine Night brings a serene, contemporary touch to the traditional nativity scene. The figures of Mary, Joseph, and baby Jesus are gracefully arranged beneath a flowing arch crowned with the Star of Bethlehem. Its clean lines and smooth…
Just a few simple hose holders for scuba diving. A normal bolt-snap eye or a D-Ring (5mm thickness) goes into the small hole, the holder then snaps onto the hose. The fit on the hose is tight enough to not come lose when you don't want…
These little dividers are amazing for keeping your products neat and organized in acrylic nail polish displays! They are great for artist alley displays, markets, or for storefront displays. The bottom has a small tab designed to be used…
A flexible Sink Caddy for your indoor or outdoor sink. Dimensions (with lower cup): L:180mm; W:92mm; H:135mm Features Store your soap; sponges and brushes in a flexible configuration. Divider allows for 1/2 split or 1/3-2/3 split. More if…
The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…
This is a tool to split and mark any length into equal spaces with ease. The picture only shows 4 points but you can easily print more parts and add more points. In action Print instructions Make sure to assemble from the bottom. You can…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-02-04 - Original post using the Gridfinity v5 spec Also see my other Gridfinity Bins: Vase Mode Bins (No Labels) Vase Mode Bins with Labels…
Klicenka Thor kladiva - original model zmensit ve sliceru na 15% tak aby vysla klicenka. viz Foto Tisknuto z PetG - 230°/80°
What even is this? If you're interested in a sturdier card box that uses more filament, check out Dre Wizards Stackable Trading Card Drawer . I designed this one from scratch with their design in mind (same internal drawer dimensions).…
This is a kit of brackets for making your own drawer organisers, suitable for organising drawers in the kitchen, office or workshop. The brackets are designed to be used with 3.5 mm plywood or 1/4" (6.35 mm) plywood. The height of the…
Model improved from my previous iteration
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
Hier kommt ein ganz besonderes Tool für kleine und große Mathematik-Fans: Unsere Fidget Spinner mit 5,5 cm Durchmesser vereinen Spaß und Lernen auf coole Art und Weise! ✨ Die Spinner decken alle vier Grundrechenarten ab – Addition,…
The divine beasts from Zelda Breath of the Wild. This was one of the very first projects I got into on my 3D printing journey, so excuse the messy models.
This is a card divider for standard size TCGs with similar design and measurements as those made by Ultra PRO and Ultimate Guard. As such it should be compatible with most of their current accessories. The model is oriented upside-down to…
Spare parts and complementary accessories for your Milwaukee Packout storage boxes and organizers! Accurate fit, extremely stable (more stable than the original) and suitable for all variants. With the dividers you can divide your boxes…
Additional insert options and reduce wall thickness to cut print material/time by over 50%. Remixed from benjamenjohnson design, https://www.thingiverse.com/thing:3371609 , Naming scheme: # upper/lower (deep/shallow)_alt "#" - Number of…
A sturdy, modular set of kitchen storage boxes / organizers designed for organizing packets and sachets such as baking powder, yeast, spices, and seasoning mixes. The boxes are available in widths from 70 mm to 130 mm and feature…
I needed to hang our new wings somehow and wanted it quickly, preferrably right now. 3D printing to the rescue! Printed using PETG, 0.2mm layer height and 4 perimeters for added strength. Infill probably does not matter too much. I…
![Scuba diver [OLD VERSION]](https://media.printables.com/media/prints/762079/images/5938852_a3a16ea1-064b-40fd-8cd9-3b230b90ccc7_76b5d0b5-da2b-4f98-9f3f-544cd67d90ea/large_display_pxl_20210726_070126328.webp)
