Counting matching models…
Update (7/14/2023) - no glue version! I've re-worked a few things so that everything presses or snaps together, making it a great project to put together with kids. This (mostly-flat) kit card is a bit of a challenge to make but will…
qualora si abbia la necessità di un ricevitore per una nuova cover o per un altro dispositivo
I was looking for an adapter, but didn't find a perfect solution for my task. So i've ended up with this remix/ combination of these two items: https://www.thingiverse.com/thing:2122826 https://www.thingiverse.com/thing:62800 Thanks to…
A fully functional padlock You only need a spring from a pen as hardware! All of the parts should be printed in the orientation the .stl files already are in. Alternatively, just grab the ready .gcode files and you are ready to print. You…
This is a working combination padlock design that can be used in place of a standard Master Lock on a locker or whatever. It's relatively strong, but it is plastic it's, so not for high security. UPDATE 8/22/2024: Fixed the body models…
bottle holder with fidlock twist mechanism, NOT COMAPTIBLE with original fidlock base. BOM: 250-350mm Reusable cable ties with 8mm wide ==> aliexpress m3 3mm heat set insert m3x10mm screw 10x3mm neodymium magnet 3m double tape For embeded…
I found it simple enough to split the GoPro mount .stl this is remixed off of, and added fuzzy skin and top ironing. Including .3mf file so you can see print settings. Thanks to @The best stork for their remix of @Phillip9933's Google…
Replica of the genuine Fidlock magnetic base. Works just as well as the original. -Model has two internal cavities to drop in magnets during print then print over the top. Magnet size is 12x3mm. Careful when dropping in the magnets as the…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Padlock, 100% printable with skeleton key, no hardware…
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Thx to Philip9933 for the support model (perfect fit). Add a Nylon lock nut and print in PETG (or sla) Gcode for MK3S (tuned.. bed heating > calibration > head heating > print !)
Fidlock compatible bike base Made for 2 neodym magnets with 10mm diameter and at least 2mm height Fixate the magnets with glue or epoxy. Pay attention to the direction of the magnets when installing! I recommend to print this with 100%…
Puck base for attaching a Quadlock case to something else, no STL provided as this was designed to be used as a base to modify to fit whatever mount you need.
My head broke less than two month after buying the mount for my bike. I designed a replacement to still use my official mount without trashing it. (the part cost is the same as the whole mount when adding the shipping cost). printed in…
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
STOP! Check out the improved Combination Padlock v2 design! https://www.printables.com/model/682893-combination-padlock-v2 This is a working combination padlock design that can be used in place of a standard Master Lock on a locker or…
The stand allows you to put the phone on a desk or elsewhere, in portrait or landscape orientation, with adjustable tilt. Could be used as a tripod when the phone is vertical. Fits large phones (see the Pixel 6 Pro on the photo) with a…
This Model only uses about 0.5 m of filament so with 5 m you can print almost ten locks! I recommend to check out the other designs in Prusas contest. Maybe you find some other useful designs to print with your remainding filament. The…
UPDATE 04-17-2024: I realized that the ram style mount on the back of the device is also used as a heat sink for the CPU inside the unit, so I modified the mount to include openings to allow for air flow around the aluminum mount plate.…
I wouldn't trust this in anything but PC or nylon or something along those lines. I printed this out of PC. The stemcap was tested and held over 11Nm of torque which is more than should ever be applied. I've tested it on a few mountain…
Quadlock Deskstand for a small or medium device with a Quadlock mount
TPU case for the OnePlus 12. The cutout in the case is meant to fit a MagSafe magnetic ring for compatible accessories and wireless charging, I got mine from here . There are three versions of this case, one has a ring around the camera…
The model is an adaptation of the Quad lock universal adapter. I made the adapter to attach my phone to a cheap phone case. The adapter can be printed with normal support structures. These can be removed very easily. Print Settings…
Please share your makes! The perfect tool for DIY security tools - the Beverage Breacher. This 3D printed template is your go-to solution for creating padlock shims from ordinary aluminum cans. Embrace the blend of traditional…
If you've been in the foam blasting hobby for any length of time, you've probably heard of the Fidlock holster system. It's pretty great - put a couple magnets on whatever, and now you can securely hold that whatever onto your body. If…
Just print it out of any material you like. PETG worked best for me but even PLA worked just fine. Just feed it trough some dors, locks or what ever and snap it shut. Afterwards you have to break it to remove it. CHANGE LOG 15.02.2023:…
Just a simple Quadlock puck with a loop for paracord. Fits super snug, very confidence inspiring. Great small item to rig up a simple hand tether or attach to your rock climbing harness. Source CAD:…
Background This print file is an extensively modified remix of Arkon Lincoln SCX24 Beadlock Wide Rims on Thingiverse by CheapAZHobbies I used PrusaSlicer to scale, remove material, & correct the geometry so it could be used on my SCX24…
My Quadlock casing for iPhone is too fat for DJI Mavic Air 2 remote to hold. So I made an adapter - a plate with Quadlock adapther that hold my phone. My first project with Fusion 360 and first print of something that I designed by myself.
Quadlock mount to embed into your 3d design. Did not find any cad file for the quadlock mount, and trying to modify an .stl file was just not working.. Please feel free to use/modify this model to fit your needs. Please share photos of…
Nice AirTag holder that fits next to the fidlock bottle cage mount. Very small profile and no unnecessary raise of the bottle cage, like so many other ugly solutions out there. Moreover the radio reception of the AirTag isn't that bad…
Designed for GMADE MT-1902, but will probably fit variety of other tires. Rim diameter is 49mm and width is 30mm (+4mm with beadlocks installed). Hardware: 1x SHCS M3x16-25 through the center 21x SHCS M2x6-10 for beadlock 3x SHCS M2x6 for…
You will need a 35mm M5 screw and an M5 nut in order to attach it to a head. Printed with ABS and with supports. OnShape link:…
No pockets? No worries! If you like wearing leggins (or other clothes), you might find the absence of pockets rather frustrating. Do you own a quadlock phone case? This backpack (anything) strap adapter can hold your quadlock equipped…
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
A hinged padlock hasp for locking a box or fridge door. Large and small size with and without screw holes. I printed the loop part laying flat for added strength and to avoid supports. Then I welded it in place with glue or 3d pen. Print…
May fit tight at first but will loosen up with use Print with high wall count and high infill for strength I recommend printing at layer height of .12 or less This file is for private use only please. Commercial license available for…
Wanted a better zip for a bag, so it could be locked shut. This enables that. I love the original design ! Tried to keep it close to the original in terms of style, I think I did that pretty successfully. The chamfer around the edge, and…
This is a working padlock. Of course, it is not pickproof…
I needed a quick and stable attachment for the remote control of my drone on my motorbike. My tank bag has a molle webbing and I like quadlock cases. So what could be more obvious than to combine the two. (The Quadlock counterpart was…
1.9" scale beadlock rims - Willys style (12mm hex) For each rim you need 5 M2 screws including nuts and one screw for fixing the front- and back- cover. Have fun. Print Settings Resolution: 0.1-0.3 Infill: 15-25% Filament material: PLA,…
This model is compatible with the lego system.
i created my own Ring holder for the Quadlock cases. I printed it in PETG and you need a bit filament for the hinge. Please split the part before printing.
Simple stand for phones with a quad lock case. Designed to hold my iPhone at a 45 degree angle in either portrait or landscape. Easy to print - no supports required.
This one is actually easy enough to take on and off, but stays super secure. Feel free to remix it so you can change nub
2.2" Beadlock Wheel Rim for 1/10 RC Crawler Cars Fastening materials for one rims: M3x10 - 5pcs for rims M3 nut - 11pcs for rims and hex hub M3x12 - 6pcs for short hex hub (alternative M3x14 for long hex hub) M2x6 - 26pcs for ring screws…
just a little posing and editing done on the model from open3dlab to make it 3d printable (barely). I printed it the way it it in the model with a lot of supports.
Strongly recommended to print in PETG
It's like Midlock, only it's a lot thinner and uses way fewer heatsets and bolts. Now instead of 6 screws holding the front plate to any of the 12 heatsets in the thigh plate, with pulling all 6 required to adjust the angle, there are 36…
Wedlock Interlocking puzzle by László Molnár Assemble six pieces into a 4x4x4 cube shape. Wedlock is one of a series of Turning Interlocking Cubes ("TICs") by the endlessly creative László Molnár. Its pieces are all made from adjoined…
This adapter facilitates compatibility between QuadLock Mag accessories and an iPhone equipped with MagSafe technology. Ordinarily, a QuadLock case is necessary for using QuadLock Mag accessories with an iPhone. While I value QuadLock…
Phone case for a Google Pixel 4a with Quadlock style connector. Quad lock doesn't make a case for my phone so I made one myself. .step file is included if you need to modify anything. Print instructions Print Settings Printer brand: Prusa…
A fully working 3D printed combination padlock. Print it, set your code, and it actually locks and unlocks. Set your own combination Nine numbered wheels are included, one for each digit 1-9. Pick any three and print them - the wheels you…
Keeps children & pets out of containers, with the help of a caribener. Designed for easy printing. Uses a piece of 1.75mm filament as the hinge pin. Category: Containers
This remix is inspired by Quadlock Deskstand from AdventureAddicted. I made the design the way I liked it and made it into 3 parts so it it easier to print. The FOOT comes in two editions (Normal and Extended) print the normal one for…
Functional Padlock with Key Print-In-Place. I've printed the padlock and key with 0.16 mm layer height, 2 perimeters and 15% lightning infill. For a stronger lock use more perimeters or more infill. After printing built-in support in the…
2.2 RC Monster Truck Beadlock. 3 different offsets to fit a wide variety of models that use a standard 12mm hex. The truck pictured is an HPI Wheely King. These are specifically designed to fit JConcepts 2.2 tires, ie the Renegade Jr,…
This is My design to replicate something like the Fidlock snap used in https://www.reddit.com/r/EVERGOODS/comments/16vg5vw/cpl24_mirror/ , until I got the money saved up to buy the actual Findlock Snap connectors. This is just a slide-on…
This model is compatible with the lego system.
Ever wondered how locks worked in the dark ages? Step back in time with a fully functional 3D-printed replica of a 14th-century padlock . Inspired by authentic archaeological examples, this model offers a hands-on look at historic…
A 1.9" 12mm hex RC rim that uses an internal beadlock design to clamp the tire to the rim. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: R/C Vehicles Instructions Use support to print the main rim…
Fits into quadlock for Pixel 5 others should fit too. Printed without supports, there will be one layer that prints on air and can fall off, but can be snipped after finish print and works normally. All rights belong to Quad Lock® Twist,…
Some of you asked for a way to make the safe lockable. I assume the desire is to secure the contents from children who wouldn't use heavy tools to open the safe. :-) This small extension is simply adhered to the door frame. Afterward, you…
This adapter is handy for quickly securing your phone to a tripod using a QuadLock case. There are two versions, long and short. The long version is required for portrait filming and larger phones. Both models print flat and require…
Inner Ring has been updated to make mounting substantially easier. Also the wheels are (and always were) compatible with Injora brass inner beadlock rings. Not to be confused with their inner wheel weights. [Rear wheel half has been…
I designed this nice remix for a project to lock a crate with a padlock or D/CLP-shackle. I added my source files (.ipt) so you can make adjustments if needed. The geared hinge is a print in place part only support needed for the cut-out.…
Made some new shoes for my SCX10. 3 piece, used 10mm m3 screws to hold them together.
soporte quadlock
Threadlock 1 inch chassis incorporates short threaded modules to put together lightsaber chassis. The individual modules means build height or length aren't a large factor when printing something for your build. Right now, there are…
Basis for the adapter is the PopSocket Adapter V2. I reduced the diameter and added screw holes I also used the M5 nut from mike_mattala's NutJob (/thing:193647) and integrated it into the PopSocket.
This is a quick model I made to celebrate TS12 "The Life of a Showgirl" coming out.
This model is compatible with the lego system.
Beadlock wheel for TATRA 815VT 8x8 with tires from aliexpress. Aliexpress link: https://vi.aliexpress.com/item/1005005925269265.html? MLMODEL TATRA link: https://mlmodel.cz/produkt/tatra815-vt-8x8/
Infos: tolerances between parts: 0,2mm Insert the magnets at the right position and orientation so they pull each other used magnets (5x2mm) since V3:…
Remixed to hold 8mm magnets instead of 12mm ones. You need to add a pause in your G-code right before 12.6mm of height so you can drop in the magnets. Kudos to the original designer, Shaun577 for the model.
I used a d12x3 magnet, probably 2 magnets on each side work better. Two parts, connected with super glue (CA glue).
This is a mount that interfaces with a quadlock case. It functions like the quadlock mount that you can buy, but it prints as a single piece, as I've incorporated the orthoplanar spring from BYU to make it function as a compliant…
This is the first design that is fully mine and made with something other than tinker cad. I found the included reference photo and thought it would be a good choice to start modeling. The lock can be made with the included pins or 5…
quadlock to stick on non parts Category: Mobile Phone
https://youtube.com/shorts/Lw1xIBmUovk?feature=share snaps in place and secures with a snapring that can remowed with a simple grip. prevents kids from turning the lock knob and opening the door, can be ripped off by adult if needed.
Geocaching container - padlock
Koło 2.4 beadlock MAX TEAM
Gerhard's original model is a great design, but was not very sturdy when paired with an iPhone (14 Pro). ethanthompson's remix provides great stability, but lacked the angle options offered by the original (imo). This remix tries to mix…
Hi, I desgined these Beadlock rim for my 1:12 scale project KamaZ 5350. To get a scale optic I decided to use the screws from the inside. The outher ring are 15x M2x16mm. The inner 10 srews ar more or less for the scale optic. 10x…
The game was created in the 80's by Ideal for the HI-Q collection I got a copy from Brazilian toy maker Estrela (who name it Cilada , Trap in english) but they was incomplete, so I made the missing parts, and one thing takes to another…
The original design is great, I love it. But the original design of 3 digits, I think the strength is not enough, I remixed a 5 digit lock.From 216 possible combinations to 7776 possible combinations. 70% and 80% still have good…
DJI RC-N1 mount adapter with QuadLock receiver. Use four M4x5 screws and M4x3 nuts to mount the two together. Print with PET-G, 0.2mm layer, 0.4mm nozzle, 50% infill. Use supports for the QuadLock receiver part - print it flat on the bed.…
The Quadlock adapter from “rudra”, now with four holes in the AMSP pattern. The holes have a diameter of 5mm and are slightly countersunk for countersunk screws. Now you can screw this quadlock receiver to something that has…
This is a lightweight 2.2 beadlock wheel which I made for my Bully 2 MOA crawler. The center portion is vented. To assemble you'll need a great deal of M3 screws, and a hub. I've printed it in PLA and PETG. It holds up to abuse pretty…
Improved version of the QuadLock bracket for hanging a Gopro camera.
Base piatto quad lock compatibile con tutti gli accessori in commercio disponibili Nel mio profilo ci sono altri prodotti da scaricare sempre inerenti a questo articolo
Want a convenient holster for your Dart Zone Outlaw? This Fidlock mounting plate is designed to attach to my Extended Picatinny Rail model, allowing the Outlaw to fit into any Holdster-compatible Fidlock holster! Both Left and Right…
Beadlock Sunraysia style wheels to fit a WPL C24/C14. Uses M2*12mm hardware. v1 has more negative offset than stock, Fusion 360 file included if you want to modify the offset or use as a base for other beadlock designs. Print Settings…
Requires M5 nut and 2 long Cable ties Material: Petg Support : Yes
Two bypass knife templates to trace around on metal blanks. These open cheaper unshielded padlocks. Don't use these anywhere other than at home on your own locks. Legal here for me. Check your local laws before trying this yourself.…
I recommend to print it with 100% infill
quadlock compatible mount.
Robust Garmin to QuadLock adapter, tested during 250km roadtrip with gravel bikes. Available also in Nylon.
