Counting matching models…
Galaxy Buds Case that snaps on. No glue or tape. It will fit Buds Pro, Buds Live, Buds2 and Buds2 pro, and Buds FE. I printed in PLA. 0.15mm QUALITY settings in Prusaslicer. Ironing for top layer only. Supports so it can be printed easily…
I added a hole for the LED indicator, i also added the wireless charging symbol on the bottom side of the case and the text with the name of the product on the top. I recomend printing with PETG because PLA isn’t as flexible, the…
This is a small SSD mounting adapter for my Synology DS218+. Theoretically this should also work for other "slot"-type drive cages. Note that the latch is missing the little pin on the front. Original source for the adapter plate:…
These brackets can be used with any of the Synology DiskStation 2 bay Plus, Value, or J series NAS: DS218, DS223j, DS223, DS224+, etc. Space the brackets 140mm apart and the flange will trap the Synology's feet preventing it from sliding…
Direct die cooling is done at your own risk! Noctua cannot be held responsible for any damage that may occur to CPUs or other hardware components when removing the heat spreader and using direct die cooling. Customers can easily 3D-print…
Vibration dampening support to be placed under the NAS's square foot. May fit any model that uses the same 13 mm side foot. To be printed in TPU - for my usage, with only one “heavy” 3.5" hdd installed printing it with two walls, 0.2 mm…
My main goal is reliability. It's a very robust design but on the other hand it takes a long time to print There are two holes for 6mm screws. The shelf is ventilated from below so as not to disrupt air flow. Please see the plan with…
I wanted a box to store the DS213 pocket oscilloscope that had the same size & shape as my TS101's box. I also made a stand, this can fit under the probe tips, it prints in one piece mostly, but there are two small “cubes” that can be…
A Simple Holder for DS218 and DS218+, DS220+, and DS214Play. DS216+II Print Settings Printer: A30 Rafts: No Supports: No Resolution: 0,22mm Infill: 25% Filament: Janbex PLA RED Post-Printing Mount it to the Wall I recomend to use Screws…
Synology DS218+ Dust cover 群晖DS218+防尘罩
A simple shelf and plate for the Synology DS215j NAS to fit into a 10" Mini Rack. The size of the opening for the NAS is 101mm x 161mm - this may work for other similar sized NAS units but no guarantees. Smaller printers like the Ender 3…
This is a Synology DS218/DS220/DS224+ Stand to reduce noise and vibration. It also helps with better ventilation. You need door seal stripes at the bottom of the stand with a 9mm width. I used these:…
A servo frame suitable for the Corona DS239MG wing servo. Optimal for gliders like f3b, f3f etc. or any other wing which is laminated in monocoque construction. Since I used cfk-reinforced filament as the material, the part is optimized…
Replacement for the DS2000 motor mount. This is a work in progress. My main PCB is dead, so I'm using an arduino which takes inputs from a thumbstick controller I made. It's not shown in this pic, but I recommend wrapping a thick elastic…
Two easy-to-print hooks for adding an additional drive - WD Passport - to your Synology DS218 server. Add adhesive felt pads and everything will sit tight.
Plain and simple, a variant made for my new DS223J model. The DS feet fit nicely on the squares. I additionally glued soft pads under the 3D printed parts themselves, for additional vibration reduction, and it turned out just fine. Happy…
Keep your NAS power plug secure by using the Kensington Security Slot! Specs ✅ Synology DS220j compatible Print tips 🧩 1 part ⮑ Print original orientation from the STL ✨ Support free! 🏋️ 15% infill 3 perimeters can help with strength PETG…
I picked up an old but mostly functional Meade DS-2102MAK telescope with Goto mount for my kid. The batteries had been left in it for years so I had to open up the mount in any way to clean it up and I discovered the worm gear on the base…
More space for your DS213. I found i very hard to fit everything in the original design, so i made a bigger box. It also fits every additional equipment and the manual. This is a remix of the orginal:…
Synology DS220 NAS mount Hanger
Print it with the TPU material, oriented plane face on the plate of 3D printer Infill 25% Tri-Hexagon Wall line count 6 Skin top and down 5 No support
PRINTABLE ON PRUSA MINI DS212 Portable Oscilloscope carrying case with removable insert tray for accessories. Hardware required: 4x: 8mm x 3mm magnets 2x: M5x16 bolts Fits one DS212, one probe, hook attachment, and charging cable easily.…
My first model, simple and overkill, but effective. Takes about 1.5 hours to print, print two for both ends. Print in TPU without supports, with the following parameters: Material: CR-PLA_1.75 Layer Height: 0.15mm Wall Line Count: 3 Top…
just a slight size adjustment to an already existing file; specifically sized to fit Samsung Galaxy Buds2 pro charging case.
Mounting bracket to hang the power adapter from a Synology DS225+ NAS on a wall. I forgot to make the slot for the cable on one of the pictures, i just used a saw to cut this after printing and added the slot to the model before…
Synology DS220J Wall Mount brackets to mount the NAS to the wall. Please be aware there is only one rotation for mounting as it has one filleted side and one chamfered side.
If you like my design you can support me on BuyMeACoffee - https://www.buymeacoffee.com/kaushikbm -------- Tilt feet for Tektronix scope. Designed using FreeCAD. Print Settings Printer: FDM printer Rafts: Doesn't Matter Supports: Doesn't…
Case to hold DSLogic Pro and DS212 space for accessories in the bottom. Hardware needed - 2 off 6mm x 3mm round magnets, 2 off M3 x 6mm POSI pan head screws, 2 off M4 x 30mm POSI pan head screws Print instructions Category: Tool Holders &…
Da mein NAS unter meinem Schreibtisch montiert ist und mein Sohn gerne Knöpfe drückt (vor allem leuchtende), habe ich diese Abdeckung entworfen, damit er es nicht ständig ausschaltet. English: Since my NAS is mounted under my desk and my…
I wanted to protect my equipment from bumps in transit, or dust while not in use. I designed this to print in one pass on the bed of a Bambu Labs X1/P1, and that mean many others as well. Choose which side the device model labeling is on:…
Very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope around. Although You may use single stand it is more…
A bracket to mount the Synology DS224+ under the table.
Case made with PLA, and the compartment mesh with TPU, all 0.20mm. Only use support on Lid for the recessed logo lettering To print the TPU mesh, choose an infill pattern (honeycomb 20%), 10 wall loops and set top and bottom shell layers…
A simple Gridfinitybin for the Owon HDS21xx oscilloscope/multimeter. Dimension: 5x3x 6.5 Units. (6.5U is the perfect height)
Skadis Mount Brackets for Synology DS223 NAS Remix of the wall mount from @Hemi345 and the skadis supports from Ryan Plourde These brackets can be used with any Synology DiskStation 2-bay Plus, Value, or J-series NAS: DS218, DS223j,…
This is heavy additional rubber armor plating for the expensive handheld OWON oszilloscopes. Will safe your device if accidentally dropped (does not protect the probe connectors). This element does not interfer with any of the OWONs…
Wanted to try using a TPU stand base instead of the foam rubber strips. Only made it 2mm thick. Might try thicker later but going to give this a try for now. You're free to go thicker in your slicer. 15% infill sounds about right. 2-3…
This is a simple, snug-fit under-desk mount I made for my Fosi Audio DS2 headphone amplifier. It has large breathing holes to enable access to the buttons and allow viewing the LED, but also to allow the metal chassis of the device to…
Very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope around. Although You may use single stand it is more…
Supports for Meade telescope tripod DS2000 and other models. The OEM part had flimsy holes where it mounts to the legs with rivets. I made this more sturdy so it wont break. Take out original rivets with drill or pliers and replace with…
I wanted something that would hold my Fosi Audio DS2 headphone amp in place on my iPhone. This worked out very well. It has a slot that exposes the volume buttons on the side. I used this Magsafe ring on the back. They're adhesive so just…
Prints well with 0.4-0.6mm nozzle. No supports required. Infill ~20% recommended.
This was a simple model for my Rode DS2 mic stand. The cable itself is around 6mm in diameter, and was printed with generic pla with 15% infill. Seems to be working well enough for me over the last month or so of regular use.
A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…
If you find my designs useful, please consider sending a tip . Update Nov 2025: Added a 2nd version which has recesses for adding an o-ring - Images online seem to show early versions of the mount used an o-ring, later ones like mine…
I wanted to put my D11 into a rugged case so this is the insert to make that happen.
I printed it with PETG, which is more ductile than PLA and more suitable for this kind of clamp-fit parts. Try PLA all you want, but be careful of it breaking, dont hurt yourself!
Ein Unterbau für das NAS DS218+. Seine Innenabmessungen betragen 85 mm x 187 mm x 25 mm (B x L x H). Die vier Füße des NAS passen genau hinein. An der Vorderseite befinden sich Schlitze zur Luftzirkulation, an der Unterseite vier…
Yes, I agree, this is absolutely nothing special (except for maybe that I was able to fit each EarBud case into a 1x1 bin. However - I first tried to download various bins from the model archive, printed them and they didn't fit. So ……
I created this insert after realizing that the cables could scratch the display. I also experienced several cases where the oscilloscope turned itself on while in my bag because one of the cables was pressing on the power button. The…
Here’s a gridfinity 2x3 holder to accommodate a few scope/multimeter probes, plus a multimeter or scope. The hole for the scope is 40mmx98mm, intended for a Owon HDS272s. Pictured is skarfacegc’s original 2x3 probe holder next to my remix.
MiniDSO DS212 oscilloscope organiser. Inspired by the TS101 soldering iron organiser box. TS100 / TS101 Soldering Iron Rugged Case - Free 3D Print Model - MakerWorld The internal layout of the case is designed to fit: MiniDSO DS212…
The Pangea Audio DS200 speaker stands are hollow, and they will be greatly improved by filling them with dry play sand. The problem is both sides of the pillars have plates welded on them, giving only a tiny hole to pour sand through.…
DS200-125 Zigbee Door sensor mount
Based on a standard 1x2 Bauhaus tray. The three components are all press-fit and no hardware is required for assembly. The charger board sits in place with three pegs on the bottom piece and is held down by the top piece. The bottom piece…
This is a screen for an ebike. Specifically, part of the Vinka mid drive system. These systems were available on some hyper ebikes sold in the USA and also some bikes sold by Conor in Spain (I think) as well as others that I am not…
Very simple holder for Owon Oscilloscopes. Needs at least 2, but I'd recommend 4 Multipoints . I have a 2102A. Should in theory (not tested) also fit the following: HDS242 / HDS242S HDS272 / HDS272S HDS2202 / HDS2202S HDS241 HDS271 HDS25…
Tento model je dodatečný držák pro Synology DS215j, navržený pro moderní pevné disky, které postrádají středový otvor pro šroubek. Doporučení pro tisk: Materiál: PETG Výplň: 70 % Gyroid ============ This model is an additional bracket for…
Gridfinity bin for Owon HD oscilloscopes.
Desk Holder for the Fossi Audio DS2. Holds it securly in place on your desk allowing you to change volume, while still leaving it portable for on the go usage. Simply use double sided adhesive to keep it in place
This component is a new model for my “Skadis charge-wall project.” If you’d like me to make a part/holder for you, please send photos of the item (all sides) along with the physical measurements. If you have any specific design wishes,…
Synology DS218play 3U 19-Inch Rack Mount This rack mount installs a Synology DS218play horizontally in a standard 19-inch rack while using only 3U of rack space. The NAS is held by an open four-part cage consisting of front upper/lower…
HDD tray for Aerocool DS200 case, just a quick model of the existing hdd tray adapted to be used with screws. A very specific design but hopefully someone can make use of it. I use software which uses z as height there for alter print…
When I pulled apart for cleaning my 6-year-old Synology DS216 NAS I found it had broken (disintegrated) the 10mm diameter rubber retention rings that hold the cooling fan in place. Design is for a replacement using Flex filament (TPU 95).…
I made this for my PDU to hold the power supply and CD reader/CD's and board. This is what I used in this: Power supply Meanwell RD-50A (5VDC/12VDC)…
Adapt DS2 Zeus QC and CAL tubes for use in the Sprinter XL. This is a simple 16mm collar for the 10mm QC and CAL tubes. I don't have a picture of it in action but just trust me on this, it works. Also, if you're reading this, you're…
MiniDSO DS212 oscilloscope organiser. Inspired by the TS101 soldering iron organiser box. TS100 / TS101 Soldering Iron Rugged Case - Free 3D Print Model - MakerWorld The internal layout of the case is designed to fit: MiniDSO DS212…
I wanted to put my D11 into a rugged case so this is the insert to make that happen.
This is a Uniden SDS200 Base Scanner Stand.. I printed mine in PETG 0.2mm layer, 3 walls, 15% infill.
LG Refrigerator door in door latch stop (Model LRSDS2706S). Since the OEM screw is very hard to access, this model is designed for you to scrape/cut the broken one flat on the bottom (pictured) then install this on top, gluing it on the…
A stand for the JDS2800 signal generator.
A remake to make the stand wider so it wouldn't slide to the side. It will print without supports. I used PLA and it takes about 4 hours to print.
As much as I like the Joy-IT JDS2915 Signal Generator , what I didn't like was that it came with a metal case without rubber feet. The metal scratches on the desk, and due to its profile it also wasn't possible to attach rubber feet. So I…
Dummy Case of similar DS28X / DS38X / C26X / C27X Servos Gehäuse Dummy für DS28X / DS38X / C26X / C27X Servos
Titled: Spaceman. Pictured printed on Esun Magic PLA Dark Green. For the Visor, I used a plastic mesh screen that I painted gold. It is then held in place by the retainer part that can be glued on. For the Rubber Mounts, I printed these…
This is a replacement design for the Synology DS2XX+ Series Faceplates. The Rubber Mounts attach to the Faceplate and I recommend printing these with TPU. They can be covered by the cap piece, that is also included. I also recommend…
blinds2go.. 'somebody' sent the incorrect measurement. spacer/mount for when your blinds2go blinds are 2 short... screw hole if needed.
This is a simple holder for Pace ADS200 tip cartridges. Each hole has a diameter of 8.4 mm, because tubes have a diameter of 8.5 to 8.8 mm. Designed in FreeCAD 0.19.
Gehäuse für DS203 Speicheroszilloskop. Druckeinstellungen: Filament: PLA Drucker: Bambu Lab p1p Schichthöhe: 0.2 mm Supports (Orientierung siehe Foto) Case for DS203 oscilloscope. Print settings: Filament: PLA Printer: Bambu Lab p1p…
