Counting matching models…
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Salut, Voici un système de boîte de rangement à assembler et à largeur variable. Pour créer la boîte : Imprimer les 2 cotés grâce aux fichiers “coteD” et “coteG” Imprimer la traverse à l'aide du fichier “traverse” → Pour régler la…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
A stable cable rack with Slot with from 4 to 8mm Print instructions Place the slanted bottom surface on the bed. 10% infill should be enough. Approx. 3hrs Print time in Draft Mode
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
3/9/26: Converted to 3 sections for smaller build plates Part List: 1, Front Section (With or without Plate) 1, Rear Section 2, Side Clips 1, Plate (If using Front with Plate) 2, M3x12 machine screws with square nuts
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
Feedthrough connector for WAGO 221-411 connectors. Perfect for going entering enclosures or going through walls with cord with up to 3 wires. There are three options of entering the connector from the “outter side” Corrugated tube…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
https://paypal.me/radicalreel Added wall storage jigs --------------------------------------- This is a remix of my ratchet strap reel which lets you take of the crank. If you print more of these it can be usefull. Some users requested it…
Резак для бутылок с переменным углом резания 8 мм.
I needed nuts for a pipe fitting, so I created them in Fusion 360. The thread is a british standart pipe thread (BSP) in 1 ¼" and for the outer keywidth I've chosen 50mm. The nuts works perfectly printed in PETG with 40% Gyroid infill.…
This is an accurate 3D model (exported as STEP) of a 1.5GT timing pulley with the following specifications: Pitch: 1.5 mm (GT1.5 / GT2-1.5 series) Number of teeth: 21 & 26 Belt width: 6 mm and 9mm Bore: 5 mm (with flat on shaft, exactly…
Another top plug edge remix, this one for single or double PC4-M6. No support material required. Remixed in OpenSCAD.
Overview GlowBar is an original full-width LED Status Bar that turns the printer’s Status LEDs into a clean, continuous band of color. GlowBar was developed after trying existing Status Bar models and remixes that did not meet my…
Spool auto rewinder with metal spring adjustable sliding clutch compact design placed within spool adjustable width for spools between 67 and 128 mm 103 mm (see updates 20.07.2026 and 22.07.2026) intended for the limited space within the…
I have made a modular tape dispenser for coloured tape which can be stacked side by side in amount you need. Each module could also be used alone, of course. Fits for tape with 25-26 mm internal diameter and up to 60 mm external diameter,…
English Version I designed a feedthrough for the Kobra 3 when printing in an enclosure. The cable from the ACE Pro can also be fed through the feedthrough. For this purpose, there's a block in the middle that's split, into which you can…
Wire / cable / tube feedthrough - screwable 65mm hole size; used this to route wired and water tube to bottom of van. 65mm drill hole size. Everything except the feedthrough plate was printed in PA-CF. Feedthrough plate in TPU 98A M65x4…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
I noticed that the left vent cover didn't fully cover the openings when closed.
Camera mounting plaftorm for DELL U24212 monitor. This is 2U width (30 mm) version. It requires 1/4-20 brass inset. Snaps on top of the monitor. It is quite strong not easy to detach. As this mount contains 1/4-20 brass inset, camera…
ESRack system design created by @EvilProphet Used for compatibility with narrow modules
Summary PLAb System and Example Use Cases A component of the growing PLAb Collection of 3D printable optomechanics. This is a variable width optical slit mechanism with independent control of each side. It leverages a print-in-place…
If you want to use slimmer magazines with the famous taco mag pouch
Overview This model is a cable feed-through for the Bambu Lab AMS, designed to keep the back of your cabinet neat and organized. It allows for easy routing of PTFE pipes and data cables, eliminating the need for an unsightly hole.…
I didn't have a wallmount but had a lot of alupex couplers laying around. As I needed a wallmount to feed the waterline through the wall I created my own mount. Clamp 2 parts together over the coupler with an M6x60 bolt and nut.
Parcel Tape Dispenser Roll and Distance spacer sleeves for 100 mm width since the original broke. can be printed without support. Would recommend PETG due to its lower stiffness compared to PLA
This is a simple cord feedthrough for the fan that's in my drybox. It's been sized for my cord to get a tight friction fit, but you can modify as you need. Printer Settings Material Type: PLA - Not limited to Layer Height: 0.2 mm…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…
Printed necktie slices to put on hoodie strings. 5mm diameter holes. Based on photo of necktie i found and set as print cover. Actual print pic will be added when i print the thing. Added full necktie, just in case someone would want to…
Custom made to fit my Warby Parker (Callum model), which use a significantly wider holderback width than the default. Graylynn 's remix of the original model does increase it to ~155mm, but it still comes a bit shorter for my…
What can you expect in Detail? A variable width game controller from 50cm to 60cm adjustable. Nudge/Tilt with accelerometer gyroscope, adjustable on the screen. Variable Flipper Buttons position, for ergonomic handling. Touchscreen Menu…
This holder is designed to attach under the bottom edge of an IKEA SKÅDIS board, allowing you to hang a small ladder (or even a slightly larger one, depending on your setup). It replaces the original SKÅDIS spacers at the bottom. ⚠…
Overall width (assembled): 80 mm Side plates (flanges): Ø100 mm Main tube (Part A): Inner diameter: 24 mm Wall thickness: 2.5 mm Insert tube (Part B): Outer diameter: approx. 23.8–23.9 mm Insert length: 20–25 mm
Designed GT2 timing pulley for my EXOS II EQ5 OnStep mount with following specifications -- Number of teeth - 60 Pitch - 2mm Bore - 6mm Belt width - 6mm The pulley has two slots designed to fit M3 hexagonal nuts to assist in shaft…
These compact desk stands are designed to raise your soundbar by 35 mm , for example to clear the feet of a monitor stand or other obstacles on your desk. They fit soundbars with a maximum width of 62 mm and help improve placement without…
Das Modell ermöglicht es, das Filament in das Gehäuse des „ PrintClosure Project ” zu bringen. Der Deckel meines Gehäuses ist 3 mm dick (ich habe Acrylglas verwendet) und es ist eine Bohrung mit einem Durchmesser von 14 mm erforderlich.…
Scoop, shovel - width 100 mm, length 120 mm, depth 20 mm. For work in confined spaces.
Update: Upgraded to version 2. Chamfer and decrease the overhangs: the new version cleanly prints without support. Designed GT2 timing pulley for my EXOS II EQ5 OnStep mount with following specifications -- Number of teeth - 48 Pitch -…
Under table mount for 10.4cm width power strip, made for one with EAN 5903858132266 (8 slot power strip with 4 usb slots). It blocks two usb ports but i don't care about them. It is also a bit too large for it but i think it's fine too, i…
These are additional parts for using the PASTA lite Receiver with thin spools (25-30mm). Print the replacement lead screw and any one of the spacers using the same settings as the original…
I noticed that the left vent cover didn't fully cover the openings when closed.
EN: Double-width drawer for Mars Svratka/TOKOZ organizer. This model replaces two single-position drawers, creating a wide storage space ideal for long tools, drill bits, or stationary. The model was designed with an emphasis on…
This is a gridfinity bin that will fit your standard 3/4 inch lathe tool holders. Fits both left and right handed tools. I have included the .stp files too so you can modify if needed. I do have a few parting tools that are a tad longer…
Good Display GDTHT019 E-paper thermometer and hygrometer is not designed to be placed on a table or shelf. That's why I created a model that allows it to be placed on a stand. The model is in two parts to make printing easier. The two…
Filament spool holder with adjustable width 45-75mm. Layer height: 0.2 mm Walls: 3 perimeters Top and bottom layers: 4 each Infill: 25% I recommend performing a plastic shrinkage test and applying corrections in the slicer to ensure…
Simple stand for 1kg/65cm wide spools which you can interlock in a row. I achieved the best results on my Creality Ender3 V3SE with a 15% cubic infill, Concentric top and bottom layers, a small brim on the outside and some tree supports.…
Meet the thinker… but make it 3D! 🧠✨ Our classic Thinker sits deep in thought, now rocking a crown 👑 and a 3D printer nozzle floating above his head 🤯. Got a problem? He’s got a print for that! Perfect for your desk, shelf, or anywhere…
Filament feedthrough for dry boxes Easy to print in PLA. If the tolerance of the nut is to tight, then scale the nut model slightly up. If the filament hole is to tight, then use a 2mm drill too enlargen it. Feedthrough nut has a Ø14mm…
Some Clips for ordering, sadly not parametric, since this was only a bodge
Take quick and accurate measurements of your saddle position so you can "copy" the position over to a new bike. I have included 3 different widths depending on which biomechanical reference point width you wish to use (70, 75, or 80 mm).…
Holds filament spools of various widths without having to change the spool holder with thick shaft for larger spools.
ESRack system design created by @EvilProphet Used for compatibility with narrow modules
Deeper full-width cups for the popular Modular Hydroponic Tower Garden
Custom Resized Version of the rack (I had Claude resize the medium bracket) and Stacked+Joined it (done in blender) to make it 2U and compatible with the Virgin Hub 5 Rack Mount I remixed.
3/9/26: Converted to 3 sections for smaller build plates Part List: 1, Front Section (With or without Plate) 1, Rear Section 2, Side Clips 1, Plate (If using Front with Plate) 2, M3x12 machine screws with square nuts
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
In Fusion360, specify your wished slot height (width of the tube + tolerance) in the “wished_slot_height” parameter and the model will adjust to your needs. The minimal height is 13mm and it is automatically enforced. This model…
This model of the Pocatello Temple by the Church of Jesus Christ of Latter-day Saints is designed by Matthew Borgholthaus (Me)! The Temple is designed in such a way to be able to fit a few different types of timed battery packs commonly…
Maturity: Very good. 10 prototypes. In use since 2024/06. A spoolwinder easy an fast to mount on a drill. There is no screw. It fits an 6mm hex bit. The spool winder is for any spool hub in the range 50-55mm. Choose the spoolwinder with…
Fully 3d printable Print List: 6 Screws 1 Cutter Body Barrel Barrel Screw/24mm Barrel Screw Nut Spacer 4 Front 2mm Spacers(for 24mm only) 2 Rear 2mm Spacers(for 24mm only) I haven't tested the plastic cutter body (as i had a broken…
Screw Mounted Cable Zip Ties 3.6mm Width, M3, M4 & M5 Heavy Duty No problem…. Zip Ties set (150/300mm) x 3.6mm Width Screw Size: M3, M4 & M5 x (20/25/30/35/40/50mm) Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere…
A simple spacer for use with CLICKbase. Used to fill a gap between the edge of your CLICKbase grid and the side of the drawer. Using a spacer eliminates the need to fasten the baseplate to the bottom of the drawer. 5-35mm in 5mm…
A replacement keyboard clip designed for the RedThunder K28 Keyboard, although i expect it to work with quite a few OEM chinese keyboards. Fusion 360 Files Included for editing/remixing Category: Replacement Parts
This die can be used as an ordinary d4. The 4-sided die is a shape of constant width (a.k.a. a Reuleaux tetrahedron.) This shape makes more fun to roll and more comfortable to hold. My D&D players tend fiddle with the die all while we…
Are you like me and when cutting sandpaper on a self healing mat the knife digs in and goes where it wants or it snags and then slips creating a dangerous condition for getting yourself cut, especially with the narrow strips used. I'm new…
Zip Tie 2.5mm Width Tie Mount Screw M3, M4 & M5 Filament PLA or PETG or ASA and ABS Recommender ASA Support: Everywhere Thank You ;-)
I made this remix for usb plug hole in the mini enclosure to use it with the usb mount by https://www.printables.com/model/1003952-external-usb-socket-for-mini-enclosure. Printed in Prusament PETG ultramarine blue.
Zip Tie 3.6mm Width Tie Mount Screw M3, M4 & M5 Filament PLA or PETG or ASA and ABS Recommender ASA Support: Everywhere Thank You ;-)
Cable Wire Zip ties 3.6mm Width Mount Hole Nail Screw Dimension 2mm, 2.5mm, 3,mm, 3.5mm, 4mm & 5mm Heavy Duty No problem…… Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere Thank you ;-)
Screw Mounted Cable Zip Ties 4.8mm Width, M3, M4 & M5 Heavy Duty No problem…. Zip Ties set (200/300mm) x 4.8mm Width Screw Size: M3, M4 & M5 x (20/25/30/35/40/50mm) Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere…
Due to the required overhang it is recommended to use PLA or a fiber infused material you prefer. I have used Proto-pasta matte fiber and Kimya ABS Kevlar. I don recommend using carbon infused material due to the amount of touching of the…
With the help of this adapter, you can attach a PTFE tube at the top of the tapered opening. The filament will then exit through the enclosure. Suitable for a 20mm thick plate.
This plate was generated from different svg templates and mainly reworked on CorelDraw!, then exportes as svg and imported in TinkerCad, cut out, joined, finished and exported as individual stl-files, which you can drag into your slicer…
Simple holder LED remote controls with a width of 40x86x7mm. I recommend using PLA filaments and setting the print to 0.2mm layer hight. It is recommended to attach the holder to the wall or furniture with double-sided adhesive tape.
For more precise details, please refer to the STEP file. Unlike an STL, which can lose subtle design nuances, the STEP file reveals the exact details, particularly around the roundings of the base. The side parts include integrated…
This is a spool holder designed to reuse the pom wheels from a stock ender 3, because more parts reused = more better. @MaxS on discord has fixed some of the problems it had, and improved the design (it now uses m5 screws as a shaft and…
A handy testing tool for determining the optimal wall thickness for any new 3D design.
Mounting a Venetian blind with horizontal screws into a uPVC window frame. The blind's included end-brackets, on their own, aren't ideal for this purpose. Adding these printed braces makes for a stronger and more rigid fix. Hardware Blind…
I fiddled around with two designs of filament width sensors (InFiDel from “Made with layers” : https://www.printables.com/model/57154-infidel-inline-filament-diameter-estimator-lowcost and from “Janar”:…
50T GT2 Pulley, 6mm belt width, 5mm bore. Includes slot for m3 bolt and M3 screw for shaft tightening. Print on flat side, with bore perpendicular to the print bed.
The last 2 pieces did not turn out great, must be reprinted before putting it up on a wall.
This is a remix of the Filament width sensor (hall sensors) designed by Janar_102020 with M2.5 heat set inserts to fasten cover, M3 heat set inserts for bearings and push-fit collet cutout to reduse width(30mm with push-fit collets…
Shovel prints without supports ,adjust line width to print sides solid ! Photo is from 150mm version
Remix of existing model by SpamBouncer modified to fit my Calipers. Channel for the Caliper Main Scale has been increased to support 16mm width. There are 2 versions both support Caliper models with Main Scales that are 16mm wide. I…
Trolley Frame - Broken Stand Replacement Part - 25 cm in width. Because of its size split up in two sections (left and right) that join together. The two sections can be joined together without any glue as it is a really tight fit. If the…
I needed corner holders to use a cardboard box as an airbrush station. 1" x 1" x 4" with a .1" gap. I added fuzzy skin in my splicer for my print.
Intro This is a 2 piece dry box feedthrough with threaded connection to 4mm push-to-connect fittings. There is a recessed area to add a piece of foam to scrub any debris from your filament before it reaches the extruder. Files are…
This prints well without infill. I left it to cool to room temperature on the magnetic plate of my MK3S.
This is the Bios: Megafauna boardgame insert, remixed with the width fixed to fit the second edition of the game box which is 148mm wide. Print Settings Printer Brand: Prusa Rafts: No **Resolution:** 0.2 Infill: 10%, Adaptive Cubic Notes:…
automatically compensates for the filament shadow on the CCD sensor as the filament moves at different heights and angles no need to calibrate. Optical Motion&Width, Width Accuracy: +-0.01mm More: https://www.pandapi3d.com/bdwidth…
Print at 0.2 mm layer height (your individual standard 0.2 mm profile), supports on build plate only, support overhang threshold 20 degrees. Glue the Prusament spool surfaces to both respective parts.
When building the MMU3, the spool holders use some foam pads that allow the roller width to be adjusted but maintain position. The foam pads came off as soon as I tried to adjust the width. I saw this design by @EngineerDude that I used…
You've probably see all the videos about these strange shapes that won't roll themselves, but when placed between two flat surfaces, seem to roll like spheres. These bizarre shapes are called Solids of Constant Width. I designed these…
Ich möchte den serienmäßigen Filamentrollenhalter nicht verwenden, da ich auch meine Filament DryBox, die auf dem Boden steht, mit dem SV08 verwenden möchte. Daher habe ich eine Sensorhalterung und eine PTFE-Durchführung mit einem…
Underwater writing slate for SCUBA diving with a narrower width. I removed 20 mm of the whitespace and kept all the original features. Shown next to the original design. Prints without supports.
Modified front shield plate of design8studio's Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure to cover entire width under display. Managed to add second stud to plate so magnets technically not required to hold it place and since…
Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…
Shape that has the same width at any location This product provides files that can be printed with MK3. Fixed old gcode files where seam was not aligned. Now you can get smooth surface.
This is designed to fit into the Dewalt Tough system storage boxes. My coworker and I use these for our sheet metal tooling. We store, transport, and work out of these boxes and trays. This is a great size to fit your pliers, rulers,…
