Counting matching models…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
Remix of ddanijell’s case for the Heltec Vision Master E213. The slim back cover fits a 2000mAh 103450 battery, and the thick one is for dual 18650s.
Hi It is my wheel to rc car. I was inspired by the Alpine BMW E21 wheels. offset 3mm widht 25mm diameter 52mm hex 12mm I recommend printing on the inside
Bmw E30\E28\E21 - door lock knob. OEM: 51 21 1 852 140, 51 41 1 911 964 Almost same with original part, but looks better for me. Perfectly fits on original lock pin. Can be used with the original sleeve. But i recommend to use custom…
Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…
Bmw E30\E28\E21 - door lock knob. OEM: 51 41 1 911 964, 51 21 1 852 140 Almost same with original part (a bit bigger in size for better fit in hole). Perfectly fits in original lock pin hole. Can be used with the original knob. But i…
******Remark (updated on 29 Nov 2025). There are two “versions” of the Heltec E213 board. Though not officially indicated by Heltec, i start to notice this when users feedback that the type C port positions are different since sometime in…
Disclaimer: These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family members, friends and make the devices and give away the…
Bmw E30\E28\E21 - cable clip. OEM-number: 63 12 1 364 431 Maybe it fits some other models. Dimensions reproduced from the original clip. Perfectly fits in original places. Fusion360 source-file (*.f3d) attached. Category: Automotive
Glove box damper pin. OEM-number: 51 16 1 828 956 Fits on many BMW models (E21\28\30\31\34\38\39\46\60 and more...). Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at…
Bmw E30\E28\E21 - sun roof handle "rosette". OEM: 54 12 1 867 887 Almost same with the original part. Almost. Perfectly fits onto original "rosette" place. Fusion360 source-file (*.f3d) attached. Category: Automotive
Extension for rather small hooks in the trunk of Toyota Corolla TS XII (E210). - version 02 (better fit, more robust). Printing from PETG (or something more durable) recomended. Inspired by https://www.thingiverse.com/thing:5444285
A hanging organizer tray to store glasses, short USB-A/USB-C dongles, a pen and larger items for the E210/2019+ Corolla center storage compartment. The maximum length of a USB dongle that will fit is 32mm (not including the male end…
Simple and cute quick printing case for the Heltec E213 eInk node. There's even a little room for a battery if you're so inclined. Whipped this together for my desk and though I would share if anyone else with the same node wants it...…
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…
USE NEW V2 FILES First version had split lower part for faster/easier reprint in case of broken part (again) but it turned out it is also super weak point of whole part at the same time. New V2 version has lower part as one piece and…
A replacement for the E21 chassis moonroof slider. The OEM replacement is about $850 since it comes with other parts. You can't buy it on it's own. Used ones were impossible to find. I made this for a 1981 BMW 320is. This should work with…
Bmw E30\E21\E12 - interior dome light switch knob replacement. OEM-numbers: 63 31 1 363 234, 63 31 1 367 353 Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at the…
A holder for a TPLINK CPE210 device. The CPE210 is designed to attach to a pole. This holder can be screwed to a surface and then the device just sits inside it with the ethernet cable sticking out of the bottom. Note that the CPE210 is…
Bmw E30 (maybe also E28\E21\E23\E24 and some other bmws) rims secret bolt cover (cap). OEM-number: 36 13 1 182 006 Modeled without original cap dimensions, but with original bolt. Perfectly fits and clicks =) Use structure paint for…
This is the interior part for a E21384 bay window lock (the pins break too easily and don't close the bay). We replaced this thing by another one that cost him almost 30€ and broke again in less than a year. So i tried to design one a bit…
The elite people of Ardan lived in the the cloud city of Stratos, while the emotional, violent, Troglytes suffered in the mines below*. The Stratos security forces used these disruptors to maintain order. *Don't worry. Captain Kirk and…
A simple organizer to store gift/punch cards, pocket tissues, a 12V charger, 30mm diameter containers, and misc. larger items in the E210/2019+ Corolla center storage compartment. The containers I used were from Thingiverse . You will…
A MagSafe/Qi2 mount that replaces the OEM rubber wireless charger pad in the E210/2019+ Corolla with the Premium Package ( 861C0-12011 ). Not designed for the standard package with the storage bin ( 58839-12090-C0 ). From my testing, the…
The model has retained the side ventilation holes as much as possible, so inserting the TL-SE2109 might be a tight fit during assembly. If you encounter difficulty inserting it, you can use a small knife or scissors to shave the inner…
A storage tray that press-fits onto the wireless charger pad in the E210/2019+ Corolla with the Premium Package ( 861C0-12011 ). Not designed for the standard package with the storage bin ( 58839-12090-C0 ). Two Variations: Standard tray…
Very simple fuse box cover. Fits over the top of the oem fuse box, its not the world's tightest fit and has no latching mechanism , but it won't budge either. Printed mine in ASA File is 220mm long, if your printer cannot accommodate I…
This is a simple Crosstour CT9500 Mount for the HSKRC TWE210 Frame from the UAVfutures 99 build V2 (2018). Angle is 30°. Printed it with TPU from FilaFlex with 10% infill. I cut out some holes to reach the screws of the top plate.
My ear canals are quite large and I notices the bigger types of earfoam are only available for headphones with wider stems. I decided to make shims to make the 5mm earfoams fit on my 3mm SE215 headphones. Because I those headphones for…
This is bushing for the upper radiator mount. You need two of these. Part Number: 17111150984 Print using TPU! 3 Walls, 30% gyroid infill
Hi all this is a case for the Visionmaster E 213 with a small footprint practically as small as I could get it! Note you might have a problem with the fit of your particular antenna and battery which is why I included the fusion file as…
Bassinet clip/holder for Eufy E21 and E20 baby monitor. Flat edge adapter to print on the side and increase strength.
Replacement clip for vent cable located behind the glovebox. Print in PETG for temperature resistance.
Jedná se o obal na kapesní vydání Bible21. Tisknul jsem z PETG. Obal je pak lehký a pevný. Jinak nejsou potřeba žádná zvláštní nastavení.
A 3D Art BMW E21 silhouette for Wall-Art or something
This is a killflash and cap for the TE211M, secured with shock cord, based on One Hundred Concept's ScopeCap/LightCap/ShockCollar. The rear cap and collar for the…
As promised, this is another case for the modular system i described in: https://www.thingiverse.com/thing:4221440 This one is a more modern design, maybe with a little dash of cyberpunk, that's also a little more compact. The2187 is the…
Is shrinkflation amusing yet? Less 2187 for more...something Since I recreated The1987, it followed suit that i should include this one as well. Its the more modern design with a small sprinkle of cyberpunk. The2187 is the pretend future…
Killflash & picatinny mount adapter for GUIDE TE211M And mount base for RMR footprint red dot I think you know where it came from Required Hardware T1 / T2 style red dot base M3 screws and nuts 3mm or 1/8-inch shock cord Mesh material for…
simple mount for the TWE210 race drone frame
https://www.banggood.com/HSKRC-TWE210-210mm-Wheelbase-4mm-Arm-3K-Carbon-Fiber-X-Type-FPV-Racing-Frame-Kit-for-RC-Drone-p-1283150.html Category: R/C Vehicles
It's done quickly and dirty. You'll need 2x m3 nuts, 2x m3x8 screws, 1x m2.5 nut and 1x M2.5x8 (m3 here may work too). Do not use conductive filament or PLA. By the way, here are the latest drivers that work for windows 11:…
I needed a replacement cover for the CPE210 POE box after i modified it to use 24V DC instead of 230V AC. Glue parts together. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.2 Infill: 23…
Antenna mount for TWE210 quadcopter frame with FrSky R-XSR reciever, mounts RX and antennas, as well as SMA chassis connector for VTX antenna, and XT60 to keep your battery lead away from the props. Slips over two rear spacer posts. For…
Adjustable Dual-Axis Mounting Bracket for TP-Link CPE510 and CPE210 A custom-designed bracket for mounting the TP-Link CPE510 at adjustable angles in two directions. Ideal for fine-tuning antenna alignment to achieve optimal signal…
Realacc Purple215 frame looks great but based on my experience is not practical at all. camera is blocked by aluminum bars, on each side, cropping the picture. you can only use 5 inch props, because anything longer hits the canopy. Very…
A 2-piece mounting bracket to secure a dashcam's external battery under the driver's seat of the E210/2019+ Corolla. Ideally, for those without the JBL Premium Audio package Only using Velcro to mount a dashcam battery to the vehicle's…
LED + Buzzer board mount for Realacc 215 frame. VTX loop on top of the frame I found to be useless, because it is too thick for VTX SMA connector and antenna. So this LED mount will bolt in it's place. Category: R/C Vehicles
You'll find explanations in french on my website : https://labidulerie.vicou.be/support-smartphone/ It can easily be adapted to other smartphones Supports not necessary. Customizable with the FCSTD file provided Category: Mobile Phone
This limits how far my refrigerator door can swing open, preventing it from hitting a newel post. This is made specifically for my GE ENERGY STAR 21 Cu. Ft. Fingerprint Resistant Stainless Steel Bottom Freezer Refrigerator - GDE21EYKFSS
С этим корпусом вам не придётся вырезать нишу в стене для установки дисплея домофона. Вам понадобятся четыре гайки-гвоздика M3x3,8 мм и четыре винта с потайной головкой M3x8 мм. Внутри также достаточно места для установки Keystone и…
Fits very well; does have a bit of a gap on top/bottom edges - still working on making it close to exact but does look very good from normal viewing Obviously dont use PLA - really, any filament that can withstand the temperature and UV…
Print standing up, preferably at least in PETG. While the overall package is taller than I would like, it is fairly stable and there is little rattling around. As the adapter is fairly snug on the water bottle, it could be useful to weigh…
Replacement bushings I designed inspired by some replacement ones I bought for my car. They came out to be about $10 for a set for 2 doors. I thought some people may want to save some money and print it themselves. These are the…
Bring that iconic 1960s and 70s European roadster and sports car look to your retro 80s BMW E21! These custom-designed 3D-printable mounting plates allow you to cleanly mount classic Raydot-style round mirrors directly onto the factory…
Air Freshener Holder that clips into the air vent of a Toyota Corolla E210 (2019-2026). Holds a felt pad or a scented stone in a vented chamber. The six slots are not decoration: an air freshener with a closed body does not blow through…
Simple and cute quick printing case for the Heltec E213 eInk node. There's even a little room for a battery if you're so inclined. Whipped this together for my desk and though I would share if anyone else with the same node wants it...…
A 2-piece mounting bracket to secure a dashcam's external battery under the driver's seat of the E210/2019+ Corolla. Ideally, for those without the JBL Premium Audio package Only using Velcro to mount a dashcam battery to the vehicle's…
Supports not necessary. Customizable with the FCSTD file provided Category: Mobile Phone
