Counting matching models…
28mm GPS mount for the GEPRC Mark5 and Mark4 FPV drone frame. The VTX antenna mount is for TBS-style antennas, and the receiver antenna mount is for standard T-antennas. My reason for using a 28mm GPS instead of the usual 18–25mm one is…
BMP280 / BME280 Sensor Case with strain relief for 2-8mm diameter Cables You need 2x M3x10 DIN912 Screws This is a composite Part, click on “Split to Parts” in PrusaSlicer and right click on the intended elements. Add the following Part…
Uses m2.5 screw to secure the sensor in the housing…but its not needed, as the jumper wires hold rather snug. in the pictures, im not using a screw. made using freecad
This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…
Liked the original and modified it a little
Bmw E30\E28\E21 - door lock knob. OEM: 51 21 1 852 140, 51 41 1 911 964 Almost same with original part, but looks better for me. Perfectly fits on original lock pin. Can be used with the original sleeve. But i recommend to use custom…
Holder for sensor GY-BME280 3.3V (humidity, temperature, barometric pressure). BME280 Link to my models 0,15 mm layer. Sensor mounting: Allen screw M3x6 or 8 Fixing the top cover (but not needed, the cover holds on its own): Allen screw…
Bmw E30\E28\E21 - door lock knob. OEM: 51 41 1 911 964, 51 21 1 852 140 Almost same with original part (a bit bigger in size for better fit in hole). Perfectly fits in original lock pin hole. Can be used with the original knob. But i…
BME280 is a temperature sensor, it also gives humidity and pressure. I use it as chamber temperature sensor in my Voron 2.4. There is several form factor, be careful to have the one on picture to use this mount ( eg.…
This is a small enclosure for a BME280 temperature and humidity sensor. Print instructions Printer: Prusa Mini Supports: not needed Layer height: 0.2 mm Infill: 15% Filament: Prusament Vanilla White
Needed a shift book bracket from my e28 and saw a couple of posts on eBay that were 3d printed and thought "wait I have a 3d printer, ill just design my own." So I took some measurements and pictures and came up with this design. Its far…
Compact Case for use with the D1 Mini and a BME280 Temperature, Humidity, and Pressure Sensor. I designed this and use it for reading temperature and humidity in various locations around the house. I use that information for Home…
Design a simple enclosure for my ESP8266 + BME280 temperature, humidity and pressure sensor with micro USB space for pow
Bmw E30\E28 - wiper arm bushing (for passenger's side on LHD, and driver's side on RHD). OEM number: 61 61 1 370 387 Perfectly fits on its place. Fusion360 source-file (*.f3d) attached. ---------- Update [04.09.24]: shape updated, now it…
Bmw E30\E28\E21 - cable clip. OEM-number: 63 12 1 364 431 Maybe it fits some other models. Dimensions reproduced from the original clip. Perfectly fits in original places. Fusion360 source-file (*.f3d) attached. Category: Automotive
Glove box damper pin. OEM-number: 51 16 1 828 956 Fits on many BMW models (E21\28\30\31\34\38\39\46\60 and more...). Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at…
Case for Heltec WiFi LoRa 32 V3 This case is designed for the Heltec WiFi LoRa 32 V3 and includes the following components: Included Components: GPS Module (NEO-6M or GT-U7) On/Off Switch (S3P = SRS3P, 19.4 x 5.6 x 5mm) → Link GY-BME280…
Bmw E30, E28, E34 - rear sun shade holder, in-roof hook. OEM-number: 82 12 9 413 178 Reproduced from the dimensions of original part. As you can see on the pictures, i've used structure paint. Just because preparing the surface for glossy…
This is a box for ESP8266 30pin+BME280 temp, humidity and pressure sensor. Easy to assembly, just slize in the lid.
Version 2 is available now! Outdoor Weather Station based on ESP32 and BME 280 Little outdoor weather station with ESP32 (NodeMCU and similars) box which can be mounted to a rail or similar (clamp diameter 22mm). It has an arm to hold the…
This is a small case that snugly fits an AZ-Delivery ESP32 D1 Mini board. The lid is designed to mount an external BME280 or BMP280 sensor board, although this is optional. It has been designed and printed as part of this project:…
This enclosure was built to house a Sensirion SPS30 (particulate matter sensor) and an Adafruit BME280 (temperature, humidity and barometric pressure sensor) for an outdoor weather station. The goal was to have an enclosure that could be…
Compact case for Wemos D1 mini and BME280 sensor with an entry hole for a cable entry grommet. Many thanks to the creator of the original model: Big Dog Custom Creations . In addition to the .stl files, step files have also been added for…
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
Housing for a BME/BMP280 sensor (5V edition) or a SHT3X sensor. Can be screwed down with a M3x6 screw.The base can hold a 8x3mm magnet. Print instructions Category: 3D Printing Summary Housing for a BME/BMP280 sensor (5V edition) or a…
Created using Fusion 360
Bmw E30\E28\E21 - sun roof handle "rosette". OEM: 54 12 1 867 887 Almost same with the original part. Almost. Perfectly fits onto original "rosette" place. Fusion360 source-file (*.f3d) attached. Category: Automotive
Remixed the housing from JT https://www.thingiverse.com/thing:2820147 in order to support: ESP32 Feather Huzzah with 2.4" TFT Wing Bosch BME280 sensor Sensirion SPS30 sensor Source code can be found here:…
Cover for BME280/BMP180/Si7021 sensors, with labels of pinout Category: Electronics
Bmw E30 (probably also E28 and E23) rear sun shade hook, "late" version. OEM-number: 51461917381. Made with the dimensions of original part, but the fitment not tested yet. So the model still in WIP-status. The sun shade has 2 hooks,…
Small cover for BME280 and BMP180. For outside use, PETG/ABS/ASA is preferred. Recommended settings: 4 perimeters 0% infill
This is another sensor mount for my Ender 3. See here for my previous one: https://www.thingiverse.com/thing:4597337 I made another one, because i was not satisfied with the laginess of the AM2302/DHT22 on the RaspberryPi. This mount…
…Please be sure to hit like & post a make, I'd love to see your prints! Install your BMP/BME280 sensor on any V-slot. Or use base with no mount for glue on application. Measure temperature, pressure & humidity on your Rpi. You'll need: 1x…
Box and lid for ESP32 modules (NodeMCU boards and similars). The BME280 version offers a mount point for the sensor below the main board. Also, the box then has vents. However, testing revealed that the board gets so warm that the sensor…
Ein fischertechnik-Gehäuse für das abgebildete Sensor-Board mit Bosch BME280 Temperatur/Druck/Luftfeuchtigkeitssensor. Montage durch Snap-in-Deckel, der auch die Platine in Position hält. Keine Schrauben. 4-adriges Flachbandkabel, direkt…
Bmw E30, E28 - rear sun shade hook holder. OEM-numbers: 82 12 9 413 177, 51461905393 Reproduced with the example of original part. There's 2 versions attached: ORIG - original fastening dimensions used. Was bad for my case, poorly fitted…
Bmw E30, E28 - sunroof assembly sliding jaw. OEM-number: 54 12 1 933 550. Reproduced with the dimensions of original part. Fits in place. I recommend to make this part with 2 steps: print this part by smaller separated parts…
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
A simple Holder for the Waveshare BME280 Sensor. The hole is for an M3 screw. I used it to mount the sensor in an Voron V0.1 as chamber temperature sensor. For reference this is the bm280 i used: https://amzn.eu/6RERB8z V2 is a simpler to…
Bmw E30, E28 - throttle body nipple. OEM-number: 13 54 1 286 378 There are 2 same parts needded for assemble. Reproduced with the base dimensions of original part. You can find the best way to place this model on the printing table at the…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
ESP8266 + BME280 enclosure with quick-slide mounting base and printable board lock for a tool free installation (not including a screw or two for the enclosure mount). I flipped the ESP8266 board inside the enclosure so the chips were…
A tiny case to slide in the BME280 sensor. Designed to be friction-fit and used with soldered pins. Print it standing upright.
Temperature and Humidity Sensor Release v2.0 Project Features This project is a compact temperature and humidity monitor built with an ESP32-C3, a BME280 sensor, and a 1.3-inch SH1106 OLED display. It's designed for simplicity, low power…
I started my Home Assistant instalation a few day ago and now added these sensors to it (will make a window reed contact next on the same base). The ESP ist running on the ESPhome software (you can find a good guide in how to wire up the…
Are your old strut mount dust caps broken or missing on your beloved E28 like mine were? Well here you go. Got the itch to do this after replacing all my struts/shocks a few months ago. Printed in PETG on MK4 and driven for the past 5000…
This is a simple dimensional model of the common BME280 breakout board. Accurate enough for modelling - not to spec.
Bmw E30 (maybe also E28\E21\E23\E24 and some other bmws) rims secret bolt cover (cap). OEM-number: 36 13 1 182 006 Modeled without original cap dimensions, but with original bolt. Perfectly fits and clicks =) Use structure paint for…
This enclosure is an original, custom-designed case for the ESP32 Dev MCU board (USB-C), with space in the lid to securely house a BME280 sensor for temperature, humidity, and pressure measurements. The design ensures the ESP32 board is…
-ESP32 S2 mini -BME280: Cheap, small and accurate enough sensor for pressure, humidity, and temperature sensing -Small wood screw (OD: 4mm, Length: ~8mm)
Simple mount for a BME 280 temperature/humidity sensor to a 2020 extrusion. Used it to mount the sensor to the gantry of my Voron 2.4. Check the photo if your sensor has the same PCB. You need 3 M3 screws and 1 M3 T-Nut.
Dieses “Geheimfach” kann über den Tast-Knopf unter dem Radio geöffnet werden. Es schließt automatisch nach 30 Sekunden. Für technische Infos zum Umbau einafch im Chat melden!
housing for wemos d1 mini with space for male pinheader and bme280 top part no support needed simply print top and bottom separately
Temperature and Humidity Monitor for my Prusa Mini+ enclosure, although it is standalone device (requires USB input for power) so can be used anywhere you want to monitor temperature, humidity and barometric air pressure. A small,…
This is a collection of cases for the Heltec WiFi LoRa 32 v3/v4 boards. It holds the board, a battery, and optionally an environmental sensor. The button (PRG) can be pressed and the reset button (RST) is accessible via a pinhole (use a…
This is a sensor housing for indoor use. The outside dimensions are L x W x H: 90mm x 70mm x 43,5mm. The wall thickness is 5 mm. You need: 4 M3 thread-inserts to complete this build. 4 M3 x 12 (or less) ISO 4762
I needed a simple mount for a BME280 breakout board on a 2020 extrusion. BOM: -) 2020 T-Nut -) M3x8 or M3x10
The door handle trim on my BMW E28 broke so I created this 3D printed replacement. I know this part is still available and cheap but I wanted to practice my 3D modeling and printing skills. This is a replacement for BMW part number…
You can mount your Logitech C270 and BME280 sensor together!
This model helps you mount a BME280 to the backside of an Ikea VINDRIKTNING . This model requires support and I'd recommend printing it with the big pillars facing downwards. But be careful when removing the supports!
This is a small enclosure for a D1 mini+batteryshield+bme280 sensor for homeautomation. Used components: D1 Mini NodeMcu mit ESP8266-12F WLAN Module für Arduino Batterie Shield für Lithium Batterien für D1 Mini GY-BME280 Barometrischer…
Presence sensor for use in Home Automation Parts used: ESP12E (ESP8266) with breakout board, 26x38mm HLK2410c 24G radar sensor, 22x16mm. BME280 Temp, pressure and humidity sensor, 15x12mm WS2812 LED, x4 pixels, 10x32mm. Notes: All parts…
house for a bme280 sensor uses m2.5 screw to hold sensor in place, but it is not needed..as the jumper plugs hold strong
BMP085 mount for "Radiation Shield For Weather Station Temperature/Humidity" by micromet. For the rest of the radiation shield follow this link: https://www.thingiverse.com/thing:1067700 Print Settings Rafts: No Supports: No Resolution:…
My friends BMW E30 M3 needed a new fog light holder, so I designed this by measuring the original part. Designed for the right side, but with mirroring it should be useable for the left side, too.
Danke an @Zdenis und @cybershifter (Thingiverse). Thanks to @Zdenis and @cybershifter (Thingiverse). This is my first work with thinkercad. Sorry for maybe small issues.
Made by cybershifter (thingiverse): Necessity is the mother of invention, so I made a thing. This Stevenson screen is designed to shroud a BME280 sensor mounted to a breakout board, to shield it against the elements in a controlled…
BMW E28 siluet 250mm long 150mm width black is 3mm white is 2mm Print Settings Printer brand: Elegoo Printer: Elegoo-Neptune-4-Plus Rafts: No/maybe Supports: no Resolution: 0.2 Infill: 15 Filament brand: Alzament/Creality Filament color:…
Um auch meinen Teil zum Weihnachtsschmuck beizutragen, habe ich von meinem E28 anhand der Front eine Skizze erzeugt und diese mit einer Weihnachtskugel kombiniert. Entstanden ist dadurch eine Weihnachtskugel für alle Liebhaber der BMW 5er…
Case designed for the Waveshare BME280 breakout board. Keeps your sensor protected while allowing airflow for environmental readings. It was designed to be mounted on 2020 extrusions. BOM: 2× M2×4mm screws (sensor board mounting) 1×…
This case requires two pieces of hardware. One is the NodeMCU with built-in display that I used here. The other is the BME280 sensor that can be picked up from here. 3x m2x8 screws and inserts for putting together. I have also attached…
Close case for BME280 wifi station base on battery (no cable) more safe in high humidity area.
Replaces the flat nut on the back of the glovebox mounting setup. Uses a single M4 nut per bracket. 3 are required to fully reinforce the glovebox. I used ABS+ for my brackets, and I would recommend it. Supports optional, print on either…
This is bushing for the upper radiator mount. You need two of these. Part Number: 17111150984 Print using TPU! 3 Walls, 30% gyroid infill
A simple case for a (Wemos) D1 Mini + BME280/BMP280 + Battery Holder / Battery Pack. There is a cutout for a rocker switch which is highly recommended (when using batteries) as you dont want the batteries connected when using the usb port…
Mesh used is 0.2mm thick PET plastic mesh harvested from reusable Billa fruit bags. Flange for the fan is sort of delicate and supports can be hard to remove from there.
Simple solution to get a place for the BME280 temperature humidity sensor. You need: Heat insert 3x5x4 Short M3 screw Zip tie
MoleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
These are universal mounting pods; you need to select a speaker that fits the opening or design an adapter for the speaker you already have.
Friction-fit enclosures for jumper wires for connecting a Raspberry Pi to a BME280 weather sensor module.
BMW e28 hide switch in ashtray for aftermarket heated seat
These middle exhaust hangers always deteriorate and end up snapping and the exhaust will sometimes drag along the ground. I now have a solution. Will need to print 2 of them. Because of the nature of the environment they will be installed…
This stl is a 3d scale model of a real civilian vehicle: the BMW 5 Series (E28) car model, made for car enthusiasts searching for an e28 bmw stl, bmw e28 3d model, or realistic diecast style printable car. Use it for display pieces, model…
I suggest printing it at 0.3mm layer heights so it threads snug but not too snug. Edit: Added a new .20-1 size for greater nozzle support, and two lids for dust protection. The lid top is 0.4mm thick, so you should be able to have a…
PCB there: https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22 Schematics there: https://github.com/NanoVHF/Meshtastic-DIY/blob/main/Schematics/E-Byte_E22/Mesh_Ebyte_E22-XXXM30S.pdf Button 6x6x9.3 Screw M2 for…
Just a simple case with a snap-in lid for the BlueDot BME280+TSL2591 . I also added the blend-file if you want to modify it for your use case.
rear license plate light bmw e28 for LED stripe
I like using the Wemos D1 ESP8266 microcontroller together with ESPHome to integrate sensors into my Home Assistant setup. For this project, I wanted a way to attach a BME280 temperature and humidity sensor breakout board to a 16 mm tent…
BME280 Temperature/Humidity sensor mounts. The holes for attaching the sensor to the mount are intended to accept M3 heat set screw inserts. The holes for attaching the mount to something else or intended for M3 wood screws. There are…
Tool for adjusting both low and high beam lights on certain classic BMW from late 70s and early 80s, such as: 5-series E28 6-series E24 7-series E23 Fit for cars equipped with 3/8" square-shaped plastic adjustment nuts (P/N): 63121362049…
The original TPU bumpers I made appeared to stopped her to fast and odd things down the line broke like solder connections and LEDs. So, I made these to slow the impact down. Using 1" pipe insulation, cut to .5" and pressed into the wings…
A replacement hood release handle/lever for the BMW E28. This is a replacement for BMW part number 51231868556. This part was broken on my 535is which required me to use pliers to pull the hood release cable. I created this replacement.…
Case for ESP32 C3 with 0.42 inch OLED connected with BME280 temperature sensor.
Fully parametric case for the Energizer E280S KaiOS dumbphone, to be printed in TPU. The OpenSCAD source code requires dotSCAD . STLs for two different thicknesses are provided: a 1.6 mm version for ordinary (fairly hard) TPU, and a 3 mm…
These were originally resin printed but work good with extrusion printing if oriented properly. There's a mute for the buzzer, two ESC Shields, and Friggen LED Eyes Babby'Ya! Lol
Eine magnetische Halterung für die Fenix E28R Die V2.0 der Taschenlampe wird nicht passen! Zusätzlich wird eine Sechskantschraube M5x12 mit passender Mutter und ein runder Magnet 20x6mm benötigt! https://amzn.eu/d/0q1aXlV Der…
I needed a small, compact box to hold a 1/4 Electrocookie Stripboard (my favourite) with an ESPHome controlled esp8266 and BME280. The box has two lugs to allow for fixing to a wall using screws. The sensor needed to remote from the…
