8,418 models
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! New thinner version for USB C: printables.com/model/1164721-charger-port-cleaning-tool-usb-c-optimized Keep your devices clean with the Dual-Sided Port…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Upgrade your brush-cleaning routine with the Hairbrush Cleaner ! Featuring fewer, wider combs for a more robust and efficient cleaning experience, this…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Counter Bin - Improved Design for Effortless Kitchen Clean-Up Model Overview: Introducing the Counter Bin , a refined and enhanced version of existing kitchen counter cleaning solutions. This model combines the best features of two…
Print approx. €5.29–€6.46 excl. taxPreliminary estimate for one variant
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Tip is thinner, handle with care! Keep your charging ports spotless with the Port Cleaning Tool V2! This optimized version is specifically designed for…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
English The 3D4U Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself to the wall. For this purpose, the base plate was optimized for the…
Print approx. €6.09–€7.45 excl. taxPreliminary estimate for PETGSource material: PET
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Say goodbye to dirty earbuds with the Earbuds Cleaner Tool ! This dual-sided design features a brush-like surface on one end for removing earwax and…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
A simple and effective drain cleaning tool for sinks, washbasins, showers, and similar drains. The flexible, barbed shape easily catches hair and other debris from places that are otherwise hard to reach, helping to clear partial clogs…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant
Also tested with other charging ports Inspired by the box openers
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Derived from Festool vacuum MFT hood by ggragg , to vacuum while working on the bench. Use a Insta-Dog to attach to the MFT table. Has internal radial pins to connect to the 27mm CLEANTEC hose.
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for PETGSource material: PET
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
So my dad asked me to design something to bring the hot air from the bottom heating exhaust of his California Ocean to the pop-top roof bed more efficiently. While I found several heating adapters for the bottom exhaust where you can…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
This is a clip shape Filament Cleaner. There is only one parts print. no magnets, Insert pieces of sponge in each side for pre usage. Print settings: Filament: PETG, PLA Layer height: 0.2mm Supports: no Perimeters: 2
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A must-have tool to help get the paint off of your paint roller at the end of a job or between shifts. Provides an easy way to squeeze the bulk of the paint off of your paint roller before rinsing the rest down the drain. This is an easy…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
My favorite movie vehicle ever! DeLorean from BTTF and Ready Player One. www.youtube.com/wekster
Print approx. €12.81–€15.66 excl. taxPreliminary estimate for one variant
Clanmate asked me to design this. You will need 6.35mm (0.25in) dowels in many locations to hold it all together, including a big one straight down the center. Over all length is 39inches. I used fandom measurements that the blade was 27…
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Simplistic reverse Bowden with an integrated cleaner (sponge) space on top of the extruder. Print instructions Category: 3D Printer Parts Print Settings Printer: Prusa MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15%…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Use this adaptor to connect your vacuum hose. You need my further adaptors to connect this adaptor to your woodworking machine. I would be happy if you would design more adapters for the basic module. You can finde a file with the basic…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
This is a model of Luz's Palisman Stringbean from The Owl House with a collapsing staff. It is 83mm wide, 183mm long and 268mm tall. With the staff fully extended, it is about 1.4m tall. This remix is based on Stringbean Palisman - The…
Print approx. €3.25–€3.98 excl. taxPreliminary estimate for one variant
Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
Resolve the endless dishes confusion in your household with this simple magnetic sign! This is an easy print that includes space for 5 magnets that can be dropped in with a pause during the print, and an optional color change can be used…
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant
Meet Mini Coffee Bean Buddy , the tiniest caffeine-fueled friend in the Mini Buddies family! ☕✨ ✅ Adorable & Tiny Design – A fun and quirky desk buddy ✅ Perfect for Desks, Shelves & Collectibles – Small but full of personality ✅…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This is the slim nozzle for Electrolux Ultrasilencer vacuum cleaner that uses special shape for accessories. Print instructions Print with brim as the object is tall with small print bed contact area.
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
Airless or Beanless Hacky-Sack. --TPU - Med-Hard. Version 2: hack.obj hack.3mf. I will keep the old hackeysack.3mf up. If Someone would not mind printing in in tpu and giving the old version a try and test run with TPU that would be…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
The Archimedean solids are the 13 polyhedra that are convex, have identical vertices, and their faces are regular. They don't include the Platonic solids, which have identical faces. All 13 can be listed in Mathematica with the expression…
Print approx. €7.55–€9.23 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €9.40–€11.49 excl. taxPreliminary estimate for one variant
Intro USB Port Cleaning Tool V2 is a small, easy-to-print cleaning tool for USB ports . It helps you safely remove dust and debris from your tech devices. The first version was downloaded over 7,000 times , so I decided it was time for a…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Clean and test your Prusa MK3 with a clean sheet. Use 0.3mm layer height support me! buymeacoffee.com/mathiasd
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
Designed to print with a 0.4 mm nozzle at a 0.1 mm layer height.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Info: vase “made from rough sea waves” it is supposed to mimic high waves on the sea Size: any scale can be used Print instructions print in vase mode use thicker nozzle and more bottom layers for waterproof vase see 3mf recommended layer…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
Crevice tool for vacuum cleaners with tube diameter d35 mm (tested on Thomson). Possible extension from 120 mm nozzle up to 280 mm. Printed with Pusament PETG. Layer height 0.3 mm should be enough since its not a mechanicaly exposed part…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for PETGSource material: PET
This is a tool for opening doors and pressing buttons on keypads without using your bare hands.
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
This adapter allows the nozzle to be angled at 60 degree for Xiaomi Mi Vacuum Cleaner. Print Settings: Material: PETG Layer height: 0.26mm Supports: No My Other Xiaomi Mi Vacuum Cleaner's Accessory Holder -…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Halloween-themed mini-pumpkins that fit on the filament inlet.
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread, for instance a magnetic valve or the water faucet. Additionally, you will need a G3/4 sealing to make the connection water-tight. Please note…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Simple key replacement for electrical cupboards found in Europe, printed in PLA on ender3 used a 45 degree angle to combat splitting on layer lines during use
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
File is for an approximate 15cm tower but scale up or down based on size of books. Bottom is thin and flexible, meant to slide under books. My 0.3mm test print (attached gcode file) printed no problems without support.
Print approx. €6.08–€7.43 excl. taxPreliminary estimate for one variant
Cleaning tool for Phones, iPads, any connector with build up with dirt etc over time printed in PETG, 0.4 nozzle, 0.2 layer Also a new revised design.
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
hi, I have just made this cleaning basket holder, it has already been through a few tests so far it is doing well. Long-term tests will follow. They should also fit Greiner machines, but I haven't tried them yet, which is why it's not…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
PIRAT SHIP CARIBBEAN PIRATSKA LOD KARIBIK PIRAT
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Maïdou Doublé Voodoo Mentor of New Orleans 1730* Born in the West African kingdom of Dahomey (present-day Benin) Some strange voodoo prevented me from attributing her as being the mentor to a specific person in history. every time I…
Print approx. €14.72–€17.99 excl. taxPreliminary estimate for one variant
Archimedean Spiral Fidget A collection of different nice print-in-place models. While the smaller ones fit in your pocket/hand the bigger and dangerous ones are more useful for educational/decorative usage. These models are good examples…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
PETG print, supports grid or snug, nozzle 0.4. Added gasket, printed from FLEX.
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for PETGSource material: PET
When the gearbox is reassembled rotate the drive wheel in reverse until it's in the neutral position on both sides before installing. So that they synchronize and it doesn't just go in circles.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Lost the bean/pea disk for our EarthWay Seeder. Put this one together. Used ABS filament at 50% infill. Used supports and a skirt. Bed at 105C and hot end at 235C. Works fine in our seeder. I've included the FreeCAD project file in case…
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for one variant
easy to print brush. Can be used for beard - as i do - or hair. Works very well to clean pan or dishes. If after cutting the tips are to sharp use a lighter and give them a short heat - this will round the tips of the brush. Print…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Print a funky mini phone case for the mini Samsung Note 20 ultra from my tutorial on youtube! Tutorial: https://www.youtube.com/watch?v=4pJQbxHhVFc Also you can add your own shapes to the back! Have fun! Print instructions For best…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
I've designed this custom nozzle to clean medium-sized surfaces like desks and drawers without using the large “mop style” rotating brush used for the floor. It works also great to clean car seats and large surfaces. I've printed my in…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
My Zodiac MX6 pool cleaner swivel assembly broke and the only thing available I can find on amazon is this complete set ( https://amzn.to/446w9Kp ). Luckily, I found the particular part I'm looking for made by BrianM2. I remixed his…
Print approx. €3.75–€4.59 excl. taxPreliminary estimate for one variant
I have designed handles to easily remove an entire layer of solid resin at the bottom of the tank for quick cleaning. They are disposable pegs so I have tried to reduce material expenditure and printing costs as much as possible.
Print approx. €8.40–€10.26 excl. taxPreliminary estimate for one variant
To connect your bosch PEX 300 AE to a kärcher vacuum hose (you need my hose adaptor)
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
I usually buy my beans in a one pound bag. The Barista Pro's hopper holds less than half of the bag. A 45mm extension expands the capacity and still fits under my upper cabinet. I have included a single color option in both STL and 3MF.…
Print approx. €3.69–€4.52 excl. taxPreliminary estimate for one variant
This is the best project I have found. In my version, I changed from 5 to 6 letters, and changed the angle of the indicator to make it easier to see. Knob is only part needing supports. Print it pin side down, to ensure a smooth…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
EN The horse head keyring created from a 2D illustration. Simple to print, no supports required. Dimensions: 45.88 × 79.13 × 2.00 mm Colors: Black: 0.00 mm – 0.60 mm White: 0.70 mm – 1.20 mm Black: 1.30 mm – 1.60 mm Gray: 1.70 mm – 2.00…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
vacuum cleaner nozzle thin and long
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PETG, extension needs full support, cover can be printed without support. This model is adapted for the PrusaMini printer.
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Der Messlöffel ist mit Markierungen für die Füllmengen 10 ml, 15 ml und 20 ml versehen. Wir nutzen ihn, um den Reiniger für den Saugroboter abzumessen. Zur Erinnerung sind die Füllmengen eingedruckt. Der Löffel passt bei Nichtgebrauch gut…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
Use this device to push in MSR mini groundhog stakes without hurting your hand. Then after removing the stakes from the ground unscrew the insert and use it to scrape the mud/dirt off of the stakes.
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
Jednoduchý nádstavec k tyčovému vysavači umožní vysávání v úzkých prostorách. Třeba v autě při čištění prostoru podél sedaček a podobných místech. Nádstavec jsem dělal pro tyčový vysavač značky ETA Moneto AquaPlus. Kompatibilitu s jiným…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Oriented facedown when loaded (correct for printing). G-code file is for .2lh Quality setting on the MK4 with using Prusament PLA.
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
This llama figurine captures the fluffy charm of this beloved Andean creature. Perfect for decoration, playsets, or educational models. The pose and fur detail give it a warm and whimsical character. Printing : Compatible with FDM and…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
This particular head is an important part of the vacuum cleaner that allows the effective collection of dust and dirt from corners. TIPS To fit perfectly, you must measure the diameter of the vacuum tube with a caliper and change the size…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
PLA, double-sided adhesive tape
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
There are some designs available, but not one fitted good enough for me. So I created my own, including a release mechanism, like the original Electrolux parts have. You will need the following to put the model parts together A ballpoint…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET
found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
Pythagorean Theorem. My version of the Pythagorean Theorem demonstration model. I made it as a gift, so I used two very specific filaments to give it the beautiful look of plywood. I made the filament changes manually, with 14 layers of 1…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
You need 12V DC 5RPM motor https://www.amazon.de/gp/product/B0752T2WHC/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 PWM speed controller…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
If you like my work consider Buy me a coffee 😊
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Introduction This is a replacement cartridge for the Philips Cleaning Pod model AC52/01 . It is not a copy of the original cartridges, but is designed to be fully compatible with the original Cleaning Pod, and optimized for easy 3D…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Zyklon: Hersteller: Staubsauger: Hersteller: Miele Modell: Tango plus / S381
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant
Printed at .1mm/layer, 15% infill with supports. A little tricky removing support material, but really nice detail. I would print it with the MMU3 but I don't have the proper colors for it.
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Material: PLA/PETG Layer Height: 0.10 Infill % : 30 Supports: None Print Orientation: Default as modeled
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
This is Frieda ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa MK2.5 with…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
English The beauty of mathematics. Archimedean spiral or arithmetic spiral. This spiral is named after the 3rd-century BC Greek mathematician Archimedes. Its caracterize by a constant growht. You can print it in one color or combine two…
Print approx. €3.59–€4.38 excl. taxPreliminary estimate for one variant
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
I created this because I couldn't find a simple wall mount for my Xiaomi Oclean X toothbrush. After printing stick a double-faced adhesive tape (I used 3m tape) at the back and put it to the wall where you want it to be. Snaps to the…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement lid for a 1kg Kraft or Kirkland Signature peanut butter jar that has a coin slot. It's a great dexterity toy for children to play with. Use it with tokens, doubloons, poker chips, or whatever fits. (It probably works…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
This is an Adapter for Bosch Powertools like Beltsanders or Excentersanders to a 34mm Vacuum Cleaner Hose. Can be printed without supports, PLA or PETG or whatever you prefer. The original FreeCad file is also attached for remixes or to…
Print approx. €2.25–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
Modification required before activating nozzle cleaning https://www.thingiverse.com/thing:4410969 That is the part of the code that needs to be replaced G92 E0 G1 X2.0 Y140 E10 F1500 ; prime the nozzle G1 X2.3 Y140 F5000 G92 E0 G1 X2.3…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A Caddx Peanut mount for GepRC Smart35 (no matter if Analog or HD). It is a strait replacement for the original SMO4K/Naked camera mount. If you're using original Peanut adapter/case remember to lock your camera in there somehow. No…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Did you or someone you know have a great week of consistent teeth brushing , or gone to the dentist and got a great report of no cavities ? If so, an award is needed to celebrate such extraordinary success! This is an easy print, that…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Pistachio/Peanut Bowl 3x hole
Print approx. €5.04–€6.17 excl. taxPreliminary estimate for one variant
Big Kahuna The supersized super dangerous spiral toy. For more information and much much smaller ones read the documentation . Mini users, need to scale this model a little bit. (Big Kahuna with some of its siblings.)
Print approx. €7.57–€9.26 excl. taxPreliminary estimate for one variant
This is a replacement lid for a 1kg Kraft or Kirkland Signature peanut butter jar that has a coin slot. It's a great dexterity toy for children to play with. Use it with tokens, doubloons, poker chips, or whatever fits. (It probably works…
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
I really like the idea from geeklimit, but I was not able to finish the project in europe. Looking for cheap pipe with ca D=25mm I found grey drain pipe DN25. They are up to 2,5mm long, but I think it will hang bent. On my 160mm wide…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Hello World, I am sharing the Taegeukgi (Korean national flag) created to commemorate the March 1st Movement . No MMU printing, no bridges needed, just print in 4 colors and assemble. You can decorate by adding a brooch or magnet. The…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
There was nothing like this for Electrolux on the internet, so I created one. My Print Parameters: Resolution: 0.2 Infill: 15% Perimeters: 3 Rafts: No Supports: No Material: PETG, ASA, ABS, whatever
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
Dishwasher cleaners have to be put upside down in the dishwasher so the cleaning agent can pour out when the membrane inside the cap gets wet. If your dishwasher has a tray instead of a cutlery basket this is quite annoying. I used to…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
Oclean Air 2 stand / holder Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0.10 mm Infill: 60% Filament: All PLA Notes: Nozzle diameter: 0.4 mm Perimeters: 3 Layer height: 0.10 mm Category:…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
Archimedean Spiral Infill Coaster Diameter 75 mm 5 perimeters
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
