Counting matching models…
***Update: 15.07.2024 - Add STL data*** Hello print enthusiasts, here you can find the first version of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…
Dual Direction Thread Screw Set (Left-Hand, Right-Hand & Double-Thread) This model set contains several types of screws and matching nuts designed for testing, mechanical demonstrations, or educational purposes. Included Parts Right-hand…
This is a Nozzle Wiper Arm with Purge Bin for the Prusa CORE One /+ that uses Bambu Lab A1 silicone nozzle wiper pads. It's available for both left- and right-side mounting. This is version 2 , an iteration of the popular version 1 , and…
Features Left-side mounting Steep angle to prevent filament poop from getting stuck Matching bin that fits under the chute Easy installation with no printer modifications required, uses existing screws and screw holes
Replica of Fender Stratocaster knob. I made it also for lefthand guitar! update: added the version with numbers go to 11. Now you can have an extra push over the cliff! :D update2: thanks to the feedback I have enlarged a little bit the…
Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.
Centauri Carbonのノズルの左側コネクター取り外しジグです。 This is a jig designed to remove the left-side nozzle connector of the Centauri Carbon.
The original design was a nice start / frame, however, I thought it would be an improvement (and a big savings on filament / print time) to add honeycomb cutouts, a 45° front angle (to match the OEM front panel angle), & added the PRUSA…
Set of compact GTA inspired keychains. Design Highlights Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys, clothes or gear Low Material Cost: Each keychain uses approximately…
Left Pointing Arrow Illusion This is a model of an object that gives the illusion of an arrow that is always pointing to the left. Turn it 180 degrees so that you're looking at it from the opposite side and it's still pointing to the…
Now that you have the best table saw on the market, the Sawstop PCS or Industrial, why not make it even better? This utility drawer fits into the rail slot on the left side and is a perfect place to hold your pencils, pens, marking tools,…
It is designed for the Bambulab plates but I guess it will work for other plates as well… I added the missing "coupler" to couple the front and back. I glued the parts together. and mounted them to the printer with double sided tape. The…
Printed on PLA infill 50 % to be very solid and strong , i think its better if you can print it on PETG How about buy me a coffee buymeacoffee.com/spank7
BioMech Finger Prosthesis In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on…
The Mandalorian beskar armor left arm (whistling birds). The model is based upon on-screen pics and it is not very accurate (I haven't been able to get quality pictures of it). UPDATE: Uploaded new "electronics friendly" version (V23). It…
Creality K2 Plus - bin Left position This chute model is for the Creality K2 Plus printers. The chute is designed so that it does not interfere with the normal operation of the fans that are located on the back of the printer. It is…
This is a replacement part for the Sony WH-1000XM4. So Recently my favorite pair of headphones that i've had for the past 4 years, finally broke, from my research I found the hinge breaking on the Sony WH-1000XM4 Headphones is pretty…
Grand Theft Auto San Andreas Decor
This model is compatible with the lego system.
This model is compatible with the lego system.
Bonjour, Je vous propose mon modèle de protection contre la pluie pour la sonnette Reolink Doorbell. J'y ai ajouté un “antivol” en y ajoutant une vis M2x4 à la base de la protection. Contenu: Une plaque murale avec insert pour la…
Google Translator: I once created a poop slide that you can easily print and that should work with 1-2 magnets (8mmx3mm) and the original screws or with 8 magnets (I haven't tested the pure magnet version yet)! The chute cannot be…
This model is compatible with the lego system.
The plastic arms on the Sony WH-1000XM3 are prone to breaking. This is a replacement part (modeled for the left side - I haven't taken my right side apart and I'm told it is not quite a mirror image). You can watch this short video if you…
Designed after Easy-Bot-3D's AAP-01 Charging handel to make it one sided. It has the option to use a m5 screw to secure it onto the pistol, however in my testing, its a snug fit and should stay on without the screw. This can be used for…
Boomerang for left and right handers … still improving the flight characteristics V1: 2023-03-02: V2 added
replacement part for a fiat grande punto or punto evo Printing settings: Print in PETG or higher temperature material 4+ perimeters Supports everywhere print laying on its side
This is a mount for relocating an Ender 3 V2 screen. It uses the original T-nuts and original style slots for mounting. The screen cable is surprisingly easy to re-route to the other side without any modification. Printing it upwards with…
Centauri Carbonのノズルの左右一体のコネクター取り外しジグです。 個人的には左右は独立したジグの方が左右一体型よりも使いやすいと感じました。 Elegoo Centauri Carbon Right and Left combined Nozzle connector puller. In my experience, having independent jigs for the left and right connectors offers…
I'm mounting a Nebula camera to the X gantry and it would “interact” with the tools if they were mounted on the right side. I flipped the original around so it could mount on the left side. I then borrowed an element from another holder…
🐻 Small Filament Spool V2 - For Leftover or Sample Filaments 🐻 This spool is the perfect solution for organizing leftover or sample filaments. With a capacity of up to 100 grams, it’s compact, efficient, and user-friendly. The spool is…
This model is compatible with the lego system.
For resting of print head cover during maintenance/nozzle change. Made for print head version, where the cover opens to left hand side. Before printing, please check your print head. If it opens to right side, the original design:…
This is a left human femur from a CT scan made available on Embodi3D (https://www.embodi3d.com/files/file/59865-femur/) by user “bazyar.” I segmented it with high detail in 3D Slicer and applied some edits in Meshmixer. To print, use your…
I wanted a two-fan setup so I added this Left Side Mount to match what I had on the right. It attaches with the original M3 screw. You'll need two M3x30 machine Screws with Nuts for the Fan. If you Make this one… Be advised that you'll be…
Basic Bowden tube guiding system designed for filament feeding from the left side of the Creality K1/K1C printer. Required components: 2 pieces of M3x8mm screws (4 if u have K1) 2 Quick Fitting Connectors (M6/M10) Reuse the two tiny black…
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
*UPDATE* I have a newer design posted that mounts on the left side and does not require a longer cable. https://www.printables.com/model/257460-ender-3-s1-zero-offset-cr-touch-mount Like many others I was having issues with the automatic…
Fusion 360 files released by request: This is an early release of version 2: Changes: Added 3D print support to the design. Some changes / forms created / added for future design changes. Left index – to convert to right hand use mirror…
Requires supports to print
I liked the "Ender 3 V3 SE / KE Storage Box With Sliding Lid" remix but couldn't get a decent enough quality on my printer, so I decided to make the lid as simple as possible and add some localized texture to help with pulling it open.…
I made this knee armor to make part of my Mandalorian cosplay. For detailed instructions on printing and adding the chipped paint and weathering look; check out this video from my Youtube channel:
This model is compatible with the lego system.
or or or or or or or or or or fotky budou později vytisknutého modelu
LHD s13 240sx left and right window switch trim / door handle bezels.
This is left skirt which goes with https://www.printables.com/model/608317-btt-hdmi5-screen-mount-for-voron-24. Print Mirror for right side. Use skirt as per printer size.
Model This is a remix of the Satsana v2. It holds a single 5015 fan and a BLTouch on the left side. Remixed From: https://www.thingiverse.com/thing:4528533 Supports will be needed for the BLTouch mount. I printed it with the fan shaft…
I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!! My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need…
A generic z-axis bin remixed to fit my needs from the original (expanded across the x-axis to not have a separate protrusion for the clip). Settings: Layer Height: 0.2mm Print Speed: 120mm/s Infill: 20% Generate Supports: No Adhesion:…
Side Spool (left or right) filament guide with filament sensor for Ender-3 S1 No support needed - Gcode included is for Ender-3 S1 PLA / 0.2 / 15% infill It made for PC4-M10 PTFE connector EDIT: S1 pro/Led bar version added ("guide_led"…
Left or right filament holder for Bambu Lab X1, X1C and P1P. The back one annoyed me. Better filament change from the front is now possible. I also made a filament dispenser for wide rolls and to fold up:…
Remix of the "thinking room" sign with a person sitting on a throne on the other side of the door.
UPDATE 8/7/2026: top z distance should be 0.2 not 2! This model represents the bones of the left foot and ankle generated from a computed tomography scan. It is life size so it fits better on a printer like the A1. Each bone is clearly…
Broke the right handguard bracket of my 2007 BMW R1200GS Didn't want to pay more shipping than the piece costs, so designed one myself. I've printed it horizontally where the single hole is situated. Printing it slow and warm. This…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This model is compatible with the lego system.
There are several designs for nozzle scrubbers but this is compact and fits on the left side, opposite the Z end stop. My print bed thermal fuse is mounted on the right side of the bed, so I could not use the extension arm by 3DP-MAMSIH.…
This model is compatible with the lego system.
Added left side with SD slot. For the smaller add-on see: https://www.prusaprinters.org/prints/122767-sidebox-sidekick
This adapter was developed by request of my friend Rami Wehbe , who wanted a way to play Zelda: Breath of the wild using only his left hand; as he lost the ability to control his right hand due to a cerebrovascular accident. The Legend of…
This a remixed version of the PRINTBED_GUIDE for Elegoo Neptune 3 pro by user 'x'. x's version works well but clashes with Bobbylebob's scrap bin (https://www.printables.com/model/456408-elegoo-neptune-3-pro-scrap-bin). My model is a…
My AMS always jammed the filament at this point. I used a screw from the spare parts to attach it. Tested on P1S (It should fit on P1P & X1C as well)
Alliance Chieftain model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
This is a discrete Air tag holder to make sure you know where your car is for situations including but not limited to your car getting stolen, or when you just can't remember where you parked in the Walmart Parking lot. It also serves as…
This was a briliant model of the hinge for the Sony WH-CH720N, but it was only a model of the right hinge so I just mirrored the model to make a left one as well. Kudos to the maker of the original model please go like and download his…
Easily printable Humerus Left. Image segmentation made in 3D slicer. Made from CT scan of my left hand. Lehce tisknutelný Humerus Levý ( Pažní kost ). Segmentace CT dat dělaná ve 3D sliceru. Vytvořeno ze skenu mé levé ruky.
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Grand Theft Auto (GTA) logo in 3D. 5mm high.
When I tried out bday998 ‘s model on my printer I discover the hotend wiring was forcing the left duct down into the print. So I shortened it so I wouldn’t be putting pressure on the wire and the fan duct wouldn't drag across the…
Dans macabre Efteling 4
The Eufy security camera s340 has a battery and no wired connection. You can just grab the camera and leave, in case you can't assembly it >2.5m above ground. In my case, I couldn't, so I wanted to lock it. The bracket has a hinge and…
This is a single shot magazine for the FX Dreamline that allows you to load the pellets from the left side. It works really good if you are right handed and have a pistol grip on your Dreamline. Keep your hand on the grip, cock with left,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a fan duct for the left blower fan of the QIDI X-Max 3. Update I uploaded the project file for PrusaSlicer (might also work in QIDISlicer, SuperSlicer, OrcaSlicer etc.). So you can slice and print it on no time, without adding all…
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
This model is compatible with the lego system.
A screen holder for my printer! Use it! :)
This is my remake of the classic auto-switching lego monorail switches with some useful additions like Y-switches. required non printable parts per switch: 6x or 7x m3x6 flathead bolt (6x for the Y switch, 7x for Left or Right) Aliexpress…
This simple tray to help you keep your environment clean. It snaps on the screews so it doesn't move.
Keychain in the style of "Grand Theft Auto" with your name or nickname in the iconic, bold font reminiscent of the legendary game. A gritty, urban design with striking colors gives your name a unique look. Perfect for fans of the…
Bracket for moving the feeders to the rear left and right. A 1.25MM GH1.25 extension cable is required for installation: https://de.aliexpress.com/item/1005011978215116.html 100CM 26AWG 15POS 1.25MM GH1.25 Male Female Extension GH GHR-15V…
mini hockey sticks right and left hand
The adapter is supplied in the AWCY? Chicks Dig ACRs adjustable folding pistol brace and rifle stock files, but only in STEP CAD format, and only for right folding. Mirrored to adapt for a left folder and converted to 3MF and STL format.…
The Grand Theft Auto VI LED lightbox is a dynamic tribute to the highly anticipated game, featuring the game's logo and imagery. With vibrant LED illumination, it creates a tantalizing preview of the upcoming release, serving as a bold…
SONY SLV 3-736-147-01 373614701 Left Threading Gear S-VHS VCR "Blue Gear" There have 2 versions, there are slight changes in dimensions, I recommend testing both variants. (I recommend resin printing) or verry good tuned FDM printer
Left handed alternative: 4 piecesare right handed or left handed - print according to your needs (I hope I can make a few left handed kids happy :)). Print the left handed versions (found in the left handed alternative folder) of this…
Since i love the CORE One modular side storage and i needed it for the CORE one L i made my own. The holes for INDX nozzles are currently untested but made from the original bondtech CAD drawings. For the left tools tray the box with the…
My wife's friends all play a card game named "Phase 10" and they travel with their ratty looking worn out card boxes from house to house. I found RockstarTS's Phase 10 lid which he remixed from an UNO card box he acquired from:…
I had requests for an arm for comparative anatomy purposes and I actually had made one for a colleague, so I'm sharing it now. Remix of the left arm bones made available under CCBY license by user MySegmenter on the NIH3D Print Exchange .…
I had no idea you can go into PrusaSlicer, right click the item, mirror along X-Axis, and a right side bin becomes a left side bin. So before I learned this I added a second hook to a single hook left side bin
This model is compatible with the lego system.
Meant for Beyblade X from what Leftburst said
This model is compatible with the lego system.
I wanted a larger version of the well designed, sturdy, simple to print original Trash Bag Holder XL. Large 33 gal trash bags in family size boxes from Sams Club, Costco, BJ's etc will fit in this larger version. I also added mounting…
display holder on the left side. no magnet needed
LEGO Train Track Junction
Bigger store container for Elegoo Neptune 3 Pro that can be mounted in the grooves on the left side of the 3D printer. You have to remove the cover in the front for sliding the groove nuts of the store container into the groove profile.
Tool holder for the left side of the Core One I wanted a simple tool holder for the left side of the Core One without lining the entire side. Complements my side bin.…
I printed a left LCD mount from Thingiverse that had multiple makes and comments saying "perfect fit". It was a perfect waste of filament and time. So I replicated the original right side mount from scratch. I also added a ribbon cable…
