Counting matching models…
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Organizer for Oral-B electric toothbrushes, fits 4 plus one charger. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant minimalist design. Easy print, no supports needed for any part. Printing Tips…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
Print approx. €8.09–€9.88 excl. taxPreliminary estimate for one variant
Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of my previous model Oral-B Electric Toothbrush Station , here reduced in size to fit two toothbrushes and one charger base. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
Easy screwing assembly! Print settings Material: PETG, PLA Layer height: 0.3mm Supports: no Perimeters: 2 Reference size: White wire 16AWG 20m - Spool scale factors: 140% Red wire 16AWG 10m - Spool scale factors: 100%
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for PETGSource material: PET
I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
This is the slim nozzle for Electrolux Ultrasilencer vacuum cleaner that uses special shape for accessories. Print instructions Print with brim as the object is tall with small print bed contact area.
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
A simple and clean wall mount for an Audi electric wall charger. Specifically designed for a 2023 Q4 e-tron, however, to my knowledge, it should fit other Audi wall chargers. Mounting This model was designed to be mounted horizontally on…
Print approx. €16.56–€20.24 excl. taxPreliminary estimate for PETGSource material: PET
Description Replacement for battery cover for Soviet electronic games (Электроника ИМ - clone of Nintendo Game & Watch ). Can be used for all game device, e.g. : NU, POGODI! / НУ, ПОГОДИ! TAJNY OKEANA / ТАЙНЫ ОКЕАНА VESJOLYJ POVAR /…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Inspired by KJDOT ( https://www.youtube.com/watch?v=WBcp7oO\_7Mg&list=WL&index=13&t=0s ) I designed 3D printed part for DIY electric screwdriver Update: Add new shorter body for 16340 battery (diameter not changed). Parts: Motor (use 3v):…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Always annoyed by commercial SEM stub holder for four stubs, while I can have five samples in one run. So I decided to design an holder for five SEM stubs (standard stub with a diameter of 3.2mm) The cover fits perfectly on top of it, but…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
This is a modification to the Prusa Mini electronics/controlboard enclosure top cover to add a 4010 cooling fan. This modification will provide active air cooling to help keep everything cool especially over long prints (18h+) in hot…
Print approx. €5.64–€6.89 excl. taxPreliminary estimate for PETGSource material: PET
Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for one variant
This is a mounting cover/frame for a Rosahl M-1J1R electric dehumidifer membrane which can be used for a filament drybox of around 20-30l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
This is a mounting cover/frame for a Rosahl M-3M1R electric dehumidifer membrane which can be used for a filament drybox of around 50-70l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Printed with PLA, nozzle 0.4mm, layer height 0.15mm. Included G-code is from Prusa Slicer for MK3S printer. Satin Powder-coated Sheet by Prusa3D.com used for print.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I recently started a small greenhouse garden with some tomato and strawberry plants and read online that pollinating the flowers manually significantly increases yield. Also for strawberries this produces less deformed fruit. Vibrations…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Šroubovací krytka 68 krabice. Samozřejmě musíte brát ohled na to, že se jedná o 3d tištěný díl a že je šance že závit praskne.
Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant
Please click ❤LIKE❤ if you appreciate my work 😊 Give your Monopoly Super Electronic Banking game a brand-new dimension! Instead of abstract cards or tokens, now you can physically see your investments on the board. This set includes: 🏢 7…
Print approx. €7.66–€9.37 excl. taxPreliminary estimate for one variant
Ender 3 pro/v2 front left and right electronic box Right Box for 6 buck converter LM2596 (work in progress for Raspberry pi3b/3b+/4/zero) Cover fit a Noctua redux 80 mm x 25 mm with grill (I like overkill cooling… and cheap on black…
Print approx. €2.73–€3.33 excl. taxPreliminary estimate for PETGSource material: PET
I build a fan controller using a Seeeduino Xiao microcontroller soldered to an ElectroCookie Mini PCB Prototype Board . I wanted a small case for this and similar projects such as those using an ESP32 D1 Mini or ESP8266 D1 Mini. There is…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Simple holder for floor brush and extension tube. Print instructions ============== Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% ==============
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Update I made a new mounting cover for the Rosahl MDL-3 membrane, which uses a standard gasket instead of the rubber o-ring and is simpler to assemble. Also the gasket frame fully covers the interior of the case, hence is more protective.…
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
The holder prints easily. The inner radius is 40 mm . You can try to print the holder with low layer height to get smoother surface or experiment with the Fuzzy Skin option. I printed it in Prusament rPLA (Algae) - the color is nice but a…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
A Spare Wheel Holder for the Upper Tray of the Electrolux Swissline Dish-Washer Printed in PET-G with 100% Infill, No Supports
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
This 3D model set is designed to enhance bathroom organization by providing dedicated storage for Mijia electric toothbrushes and tongue cleaners. The electric toothbrush holder, as described previously, offers a practical and stylish…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
LCD: https://pihrt.com/elektronika/315-arduino-uno-deska-i2c-lcd-16x2 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15mm Infill: 15% Filament: Prusa, DevilDesign... PETG Post-Printing Category: DIY
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
There is a hole to the left of the trailer hitch on the Jeep Cherokee Trailhawk meant for electronic things. If you don't have those things, you can use this to cover that up (could also hide something in it turning it into a “secret…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for PETGSource material: PET
Premise Not so long ago we created a small human and while the human was for a few months rather a calm being, eventually he become rather active and tried to explore places we would prefer kept untouched. One of such places were various…
Print approx. €3.48–€4.26 excl. taxPreliminary estimate for one variant
I ditched the box my Jakemy screwdriver came in since it's going into my toolbox, but I didn't want the button getting pressed while rolling around, so I printed up this quick little cover to keep the battery from draining. Printed with…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
a big stand printed in one piece on a cr6 max
Print approx. €37.52–€45.85 excl. taxPreliminary estimate for one variant
Electrolux vacum adapter
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
End cap for electrician's rail to switchboard. Protection of the edges of the switchboard rail against accidental contac
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Electronically Assisted Astronomy (EAA) is a corner of the amateur astronomy hobby that uses cameras and electronic viewing devices to enhance the viewing experience of dim fuzzy astronomical objects. The Celestron Origin smart telescope…
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant
This 3D-printed toothbrush holder is designed to neatly organize up to four electric and four manual toothbrushes in a compact and practical setup. The holder keeps each toothbrush securely separated while providing easy access for…
Print approx. €15.00–€18.33 excl. taxPreliminary estimate for one variant
Introducing, the electron bucket. A toolbox with a carry handle, designed for din rail mounting two power supplies and the terminals to keep them organized. Individually switched outputs and all. Cornboy, as always, for scale (Look up The…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
Montura para capsula TSB-165A de 16mm del micrófono BM-800. Permite el cambio de plano del micrófono de vertical a horizontal, mediante el reemplazo de la montura original. Impreso con Biqu B1, boquilla de 0.4, PLA, capa de 0.2mm, 30% de…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
Miniature template for drawing electrical schematics. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/792825-french-rulers Template For Logic Diagrams…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Electric Cable Diameter 4,5mm -> 8mm Mounted using screws or double sided tape
My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…
Try printing at 80% of speed and very hot bed (75° ?) Best R
Improved version - combination of 2 models Better locking mechanism to secure the wires larger adhesive area for double sided tape combination of following models:…
Improved version Better locking mechanism to secure the wires Want to have a commercial licence on this model? → Join the CLUB :)
Here's a B.C. Rich Warlock style guitar body I made. This is a fully functioning guitar body, just add a neck and electronics! I started making this in July 2022 right around the time Stranger Things 4 ended since I wanted the guitar from…
Parts print flat and snap together. Print shorter legs for electric guitar and longer legs for acoustic guitar. The connector and right and left back are the same for both versions.
If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…
…If you don't feel like springing for a coffee, please at least be sure to hit like & post a make, I'd love to see your prints! A super quick design to turn your Spiral Vase Rose into a glowing electronic tea light with a natural rosebud…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
This is a fun model to print because it's quick (49 min), and multi-color makes it look 10 times more awesome! Change your filament color/ material at layers 26 and 30 to achieve this look. Make sure you turn supports ON, or else your…
Every model I found for hiding the cable of the Braun / Oral-B toothbrush wall charger was not enough good/polished/perfect/minimal for me so I designed this and I hope you will enjoy this too. The design is based on the german 55mm…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
4 in 1 Schlüssel für Schaltschränke und Industrieanlagen. 2x 4 Kant Schlüssel, 1x Dreieck und Schaltschrank Schlüssel. am besten mit 60% oder mehr Füllung drucken für Stabilität. 4 in 1 key for control cabinets and industrial plants. 2x…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
This 4-Way Utility Key is designed for opening a wide range of electrical, utility, and service cabinets. The compact cross-shaped design combines multiple common key profiles into a single tool, making it ideal for technicians,…
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
To make the ski lift you first need to print all the parts. Print 8pcs of; “wheel-connect2”, wheel-connect1, wheel-connect3 Print 16pcs of “small-wheel” You can add som grease to make the small wheels spin better. You also need to use…
A stylish key cover that turns any fey into an electric guitar. Look at the second photo for assembly. If you have any questions or concerns feel free to comment.
Electric mining drill from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The drill can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included…
The 10mm diameter, 3mm height magnets to hold the two halves of the UFO together are optional, as a display piece gravity alone should be sufficient. Use a piece of wire to hold the UFO over the base at a height and an angle you like.…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…
electric cabinet key (triangle)
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Introducing a new and improved template for drawing electrical schematics. With the help of the template, you will be able to draw cross-sectional electrical diagrams. It is suitable for beginners and students. The template is designed so…
Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Remix-Ready I added a BLANK version for you to add your own language/font. ------- For this look start with White then switch to Black, then Red last. Quick Guide to changing…
I decided to create my own water pump using a 775 motor I had lying around. It is capable of some pretty hefty flow depending on how big you make the body and impeller. If you find that your motor is overheating, lower the height of the…
A print-in-place travel case for 2/4/6 Oral-B toothbrush heads (Vitality/Pro/Smart/…, NOT iO/Pulsonic), including 2/4/6 stands. Before that we just carefully placed them upright somewhere, but they often fell over. I had several…
This is the third version of my headless guitar design. The main improvements are the shape modification and the installation of a floating trem system. I have uploaded the step files in case anyone is interested in customizing it (make…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
NOTE 2025-04-23: I just uploaded a depth gauge, which will make it very easy to determine the gap between the wall and electrical box faces. This gauge makes selecting the correct spacer thickness quite easy. That model is here: NOTE…
The small electric pole from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The pole can stand alone or could be glued onto an empty tile that is part of our grid system. Empty tile and…
A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists
Snaptronics gives you a bunch of solder-free 3d-printed bricks to build various basic circuits in a breeze on a magnetic snap-fit basis.
Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…
if you need a different size let me know
Parametric junction box for electric wiring. Use the default 100mm x 100mm x 50mm (8 holes sized for M20 cable glands) STLs supplied, or adjust the OpenSCAD file to control dimensions, number of holes, cable gland diameter and so on. Make…
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
You can use a 3660 4s Brushless motor. The connection betwen the prop and the motor is a Gt2 Pulley with pressfit. You should print the whole Thing in 0.2mm and a fibre reinforced Material. The Flow corrector gets glued to the back of the…
Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
prints best with 2 walls and 10% infill, suitable for 175mm TIG tungsten electrodes with hex sides, so it cant roll of the table :) when going with more strength, you might want to use the looser Version, since the threads get kinda…
Electric toothbrush holder for 4 toothbrushes. should fit most if not all oral-b electric toothbrushes
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 17th Dec 2022: Updated "Christmas Lantern Box - Middle.stl" as the holes at the bottom was a bit offset. My bad! IF YOU LIKE THIS MODEL, CONSIDER ALSO DOWNLOADING ANOTHER…
A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
9/10/26: Ploutone no longer makes the headless bridges used in the original models. There may be remixes for alternate part compatibility! Welcome to OpenBass! This is my first DIY guitar project. There are many 3D printed guitar projects…
For the easier application of static grass on the model of railway, I created a model of grass applicator. For more details, check the article: https://blog.prusaprinters.org/3d-printed-railways-size-h0-187/ Print instructions Everything…
