214 models
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
Hey team, There are already a few great models on Printables for Vernier calipers but for a bit of fun I thought I would give it a try and share my results. The overall design is the classic shape and has features you would find on a…
A vernier scale is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation; thereby increasing resolution and reducing measurement uncertainty by using…
I couldn't remember initially where I'd gotten the idea to use the moire effect for motion amplification in this way, but I think a lot of it came from this clock project: https://www.thingiverse.com/thing:5173948 This is a radius gauge;…
3D Printing Guide: Vernier Caliper Introduction: This guide describes the 3D printing of a vernier caliper, a versatile measuring tool designed for precise measurements in the two-decimal-point range. The caliper is printed in multiple…
This print will show you how far out of square your printer is. It accurately measures up to 1mm of deviation between the X=Y and X=-Y directions. When running a CoreXY printer it's very important that your belts are evenly tightened.…
I made a few changes to a caliper design from MAQUINA. I added a number scale, a slide stop screw, and extended the scale. The model is chamfered in such a way that once the stringing is cleaned up, everything slides together nicely using…
Simple wall-mounted vernier caliper holder. Use double-sided tape to secure it in place. Print with supports for the two prongs.
I designed this as I am always using my verniers at work and home, but never get round to putting them back into their cases to keep them protected. They just end up left on my desks where on day someone is bound to knock them off. This…
cerniera anycubic kobra 2 neo pro plus max materile= PLA + x1= vite m3 12mm se riscontrate problemi nei file (sono un modellatore alle prime armi), contattatemi e li aggiusterò
Can be used for quick, rough measurements up to 50mm. The vernier scale requires support. After printing, slide the vernier onto the main body and push the lock pin in from the bottom side.
The holder works for the slightly fatter plastic calipers and the slightly thinner metal types. Easy to insert and remove the calipers. Print upside down. Use a brim to help hold the pegboard tips down if your adhesion to the buildplate…
The outside swirl pattern will give the illusion of rotating 378° when the dial only move 1.8° (360°/200 steps). This is possible due to the interference of different number of windows and color notches in the base. The angle of the…
This grind size indicator includes a vernier scale that allows for precise sub-tick adjustment on a stock DF64. Each gap in the vernier represents 1/10th of a stock tick mark. Easily and repeatably adjust down to the 1 micron resolution!…
Pickguard for Ernie Ball Music Man Stingray bass. Fits great (after some trimming to fit the pickup) on my 2002 Stingray. This will fit a standard Ender bed to print in one piece. My version was printed in black for the first 4 layers and…
I decided to remix @Alberto Digital Caliper Holder after a few weeks of use I noticed my caliper would slant to one-side after taking a closer look I noticed that the fine adjustment thumb wheel on my caliper was coursing the issue…
This is a remix of thing 26258 . It's a wonderful design, but the inches vernier is misaligned. I fixed it! It was originally designed to be cut from acrylic and bolted together, but I've found it works wonderfully if it is cut from paper…
3D printable callipers for quick on the go measurements that don't require ultra high precision. Print with a 0.2mm nozzle. I used PETG for its strength, but other materials would work too. Print the depth gauge separately, and use a…
I'm not sure If It will print in one to I put the parts separately.
Print at 0.1mm layer height for accuracy. slide the two parts together and then insert the key ring to secure them together. The marker on the sliding part can be printed with a filament change to have it stand out, or it can just be…
Digital Vernier Caliper Replacement Battery Cover A replacement battery cover for common, generic, vernier calipers. Prints on the face with the arrow on it, excellent bed adhesion is required as this is a small part.
This is an open-source vernier-style throttle for use with flight simulators! Build Documentation: ( https://create.arduino.cc/editor/vince_prints/26fd18d3-42d0-418f-9d31-a8dba8ad6354/preview ) Video Demo and Build Guide: CadetYoke:…
Remix of great design by AMT, allows for easier readable legends on single color print or with bad retraction.
Vernier caliper will protect against dust and imacts. The case was made from prusa PETG(submarine blue).
This is a set of flexible covers for vernier calipers, it should fit most calipers both digital and otherwise. My hope is that it will reduce damage to the jaws of the calipers. Ideally it would hold the calipers very slightly open but I…
Have you ever had to guess the radius (or diameter) of a curved object? This tool helps you measure a numeric answer to that question! Radius = Caliper Reading X 2.414 How to use: Insert the base of your caliper in the slot of the tool…
I printed an Elmo Face that my daughter loved, but noticed no other characters existed yet, so I sat down and learned how to make Big Bird , Cookie Monster , Count von Count , Bert , Ernie , and Oscar the Grouch , and my daughter's…
A simple mini vernier caliper, perfect as a small gadget or keychain tool. It can be used for quick, rough measurements up to 12.5 cm . Main scale : marked in 1 mm steps, total length 125 mm. Vernier scale : 20 divisions (21 lines) over…
This is great while working at your desk measuring small things that you need to draw and print. The top and bottom “teeth” measure inside and outside dimensions. The pointy extension on the right end measures hole depth. The hash marks…
Parkside Digital Vernier Caliper Replacement Battery Cover A replacement battery cover for the Lidl Parkside Vernier Caliper. As Lidl do not make these, I assume that it will be compatible with other equivalent vernier calipers. Prints on…
I designed a set of calipers that allow for measurements of 0.1 mm precision. The calipers have all the normal bits: internal and external measurement arms as well as a depth gauge. The scale allows you to read up to 0.1mm, but the…
This protractor has a Vernier scale on the pointer, which lets you read angles with 0.1° precision. Whether you can print and assemble it that accurately is a different matter. I put effort into the gcode to get the seams in good spots…
I needed a simple desk organiser that has a dedicated vernier caliper holder. 3 tall sections at the back for pens and long tools (screwdrivers etc), 1 medium for shorter items, and one small shallow tray for coins and usb sticks etc. The…
Caliper depth measuring foot to fit an unbranded vernier caliper with body dimensions 16mm * 3.5mm having small plates on both sides I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too…
Since it's 3d printed the accuracy depends on how well tuned the printer is Print out stiff and low friction material, favor pla over petg inherent multicolour support with different parts for the different colours with the text combined…
If you draw a circle on an x/y plot touching both axes, the distance from the origin to the centre of the circle is R+L, with L being the distance between the origin and the nearest point on the circle, and R is the radius. With a bit of…
Case for Mitutoyo N15 530-101.
Designed in Blender. required bed space 300x300 nozzle: 0.4 supports: yes layer height: 0.1 infill: 5% The piece might be tight at first, it will ride smoothly after a couple times you use it. Alternative version included for ender 3,…
This is a more aesthetically pleasing updated version of my original Vernier & Pen Desk Organiser. I have been using my original version every day at home and work since I made it. The original was designed to be functional with not much…
Educational model of vernier caliper. Not for precise measurement. INSTRUCTIONS : Filament: PLA. Layer Height: 0.2mm Perimeters: 2 Infill: 25%
Very simple holder for a Mitutoyo Vernier Caliper mod. 530-101, designed for the IKEA Skadis pegboard. There are 2 different files, one for the caliper front and one for the back. The holders snap in place and they print without supports.
Print with PETG Infill 90% No Support Required
I wanted a miter gauge that was more precise than the ones that typically come with saws. This model features an easy-to-read scale with a vernier subscale measuring down to 0.05 degree precision. Modeled in two sizes, the smaller for…
The “larger” model is used for a 300mm unbranded caliper set. I bought this one, but it appears to be a common design for multiple low cost 300mm digital calipers: https://www.amazon.com/gp/product/B014ZYWL7G/ The “small” model is used…
This model is compatible with the lego system.
Case for vernier caliper model 530-104 with magnet close. 5x3mm magnets. Does not fit in mi ender 3 bed plate , printed in bambulab x1c. Printes in petg, but pla works great. I Use a old umbrella rod, but any 1,5mm rod works.
Needed a simple case for my vernier, remixed this to add my logo and slide over secures to keep the case closed
Description: My Sculptor 078s gets moved back and forth between drip and espresso range quite a bit and I was having trouble getting back to exactly where it was previously. Not anymore! Stock “step size” according to Timemore is 28 μm…
Converting a broken electronic caliper to a vernier caliper A few years back I bought a cheap caliper of the Aldi "Workzone" brand. This particular unit consumed batteries faster than I consume chocolate, and one day I found that the unit…
Weekend at Bernies - Richard, Bernie & Larry - 1989 3D printable model.
Valentine's day, valentine's day... valentine's day. The people who organise the now famous "3DPrintShow" didn't think of people like me when they decided the date for their first exhibition in New-York City : February 12 to 15... It took…
Vernier caliper holder mount. Printed in Tpu95A. 20% Infill. 55 minutes. Print with support.
Old-school vernier caliper case. Pry top cover carefully from base. Future version would locate the catches differently to avoid stress to the cover. Print instructions Printed in Amazon Basics Translucent PLA with the stock 0.30mm Draft…
A vernier caliper. Here is the on shape link: https://cad.onshape.com/documents/4a9343fff79c081ebeee04f1/w/fc953f75b37eae70a8a407d5/e/16b7ccd94b622c3a4aaf4880 Print with 0.2mm layer height, with surface ironing on top surfaces on.
Vernier caliper holder for peg board (Square hole) Total brand
This is remix of the apparently unloved (unmade?) simple 2-part vernier caliper by harkiirat. https://www.thingiverse.com/thing:4509947 I printed that but it was unusable because of 0.7mm clearance between the two parts. I modified…
This is a remix of the following parts. I literally smooshed them together and added some holes and a few chamfers: Bracket vernier calliper (Peg mount) ( https://www.thingiverse.com/thing:2866877 ) by ArneBanane Pegboard 2 position blank…
Vernier calipers Vernier calipers are used to measure lengths of objects, inside and outside diameters, depths of holes, and step dimensions. I have simplified them some and remember its a 3D printed tool, accuracy is limited. I added a…
Hello this is my first design in fusion 360, 3D Vernier Caliper Case. I could not print it for my vernier caliper as my print bed is too small. So if anyone is printing it, please share the result with me. Any advice on how to improve…
stampandone 2 e aggiungendo un perno costituito da uno spezzone di barra filettata M4 da 70mm si ottiene una cerniera solida e facile da stampare
Simple vertical desk calliper holders with Fusion 360 file Designed for these Preciva digital vernier calipers: https://amzn.to/3MvyVmC 0.2mm Standard Model: V2 square caliper Printing Time: 27m13s Weight: 16g SUNLU Recycled Black PLA…
This model fits for Mitsutoyo calipers
Print with supports for the skadis hooks.
this small easy-to-print callipers holder fits right into a standard key slot pegboard and holds a vernier callipers very well. print it with supports and 20% infill for good results
Remix of https://www.printables.com/model/224223-holder-for-verniercalliper-with-thumb-wheel which is a remix of https://www.printables.com/model/55232-digital-caliper-holder I modified for vertical printing with no supports by adding…
Parkside Vernier Caliper Wall Mount & Holder All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thx All trademarks, logos and brand names are the…
CERNIERA FUSION_GT3 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
I bevelled the slots in the housing to enhance the readability of the "Moire" digit.
This box is designed to fit 150 mm (6 in) analog Mitutoyo Vernier calipers. It has print-in-place hinges and locking tabs. Best printed in PETG. Use the "emboss" feature in PrusaSlicer to insert your name into the lid. The original CAD…
Check the dimensions of your vernier case as I have two, it fitted the first one perfectly and the second was a bit snug on the case length but worked fine. I have included the RSDOC file if you want to modify it in DesignSpark Mechanical…
Updated: September 3, 2026. Edited the STL files and printed on my new Bambu Lab A1 non combo.
Took some inspiration from Synth3D and remixed Kory's Garden Bernie to add a 10x1.5mm magnet.
I made these adapters to use my Mitutoyo 530-122 vernier caliper to measure wear on my car disc brake rotors and avoid the outer lip left when the rotor sees a lot of wear. The offset should be 20 mm, if your printer is not accurate…
This is a basic caliper holder that mounts to the right-hand side of the printer and utilises the existing screws. I printed this in PLA with standard settings and applied bed-only tree support for the overhangs. **********v3*********…
Stand for 300mm vernier calipers - remixed
stp file to modify This is a old drawing & i haven't updated it but it still works to this day
A big vernier calliper with real steel scale is help us to take big dimensions with exact precision. Accuracy of this vernier is depend on your scale. example: with my scale it shows plus/minus 2mm in my dimensions. so make sure you can…
Simple vertical stand for cheap Mastercraft vernier caliper. Model # 058-1647-0 Has a loose fit for ease of use Uses Le0Michine's Fusion360 Gridfinity Generator https://github.com/Le0Michine/FusionGridfinityGenerator
I needed a case to transport my 100mm analog caliper and I wanted to have a latch included in the geometry as well as filament hinges. I left some room to glue foam to protect the caliper but ended up not doing it. WIP: The latch has…
This is a remix of the ' Universal Caliper Mount ' for tool boards with 45 mm keyhole spacing. Thanks to the provided *.f3d file from swiss_beluga it was easy to adapt the mount to fit my tool wall system. Can be hung on a tool wall with…
I used fusion 360 on the Bernie print from thangs. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Hatchbox PLA Black Notes: Any material does the trick. How I Designed…
Its a little Bernie for your plants in your garden, or just a potted plant I modeled this up in Tinker CAD and I think you guys will really like it I did my in 2 colors by stopping on layer 7 and changing the filament.
Bikernieki, Riga, Latvia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
This is a project I have been working on for a while. I want to first extend my thanks for the original model, which can be found here: https://www.thingiverse.com/thing:2336754 This kit is designed to work on the Vernier Physics Track.…
vernier caliper box holder
The main part is missing? No, it is not ;-) I did not want to steal the clicks from the original designer on this very nice design. Therefore I published only the slider here, which I did myself. Please get the the ruler from the original…
I occasionally need to measure items bigger than 150mm to 0.1mm accuracy, so I attempted this steel ruler conversion to see how well it works and I was quite pleasantly surprised at the result.
Mit Glas oder Becher
I really like the design that this maker came up with. However I like to print things in fast draft so I modified the file to add more height to the mm lines. You can see a before and after with my FDM Elegoo Neptune 4 Pro. I was able to…
I mounted my honeycomb wall organizers on a cupboard door and found that the vernier caliper mount allowed the tail to flap around a bit too much for my liking. I made this very simply post up with space to fit a 10x1.8mm magnet in the…
I have two of these cheap, metal, unbranded Vernier callipers, and wanted to create a Gridfinity holder for both, plus 4 batteries. Instead of wasting a print on someone else's design that doesn't fit this model, I decided to waste about…
150mm Electronic Vernier Callipers Storage Case. The fit allows adding a felt layer that finished it off beautifully.
Use Base Single Hole Mount to attachment this mod
Vernier Callipers, Gridfinity bin These should fit most callipers but for reference mine are: Moore & Wright 110-15DBL There are loads of bins for callipers. Unfortunately none of them were suitable for my bin, so I made my own. These…
remix https://www.thingiverse.com/thing:4960850/remixes https://www.thingiverse.com/thing:4736518
Bott square Peg board vernier box mount.
The one made by SunShine only works for the version that has mm on the bottom and isn't that great when using a 0.4 mm nozzle. So I made a different one for the version that has mm on top and made it a bit more 0.4 nozzle friendly! (It…
Kids Art - Bernie Bunny 3D printable model.
Vernier throttle for flight sim Arduino code avilable here : https://github.com/p0lysim/VernierThrottle
