1,629 models
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
This thing was crowd designed by the members of the Espresso Aficianados Discord . If this design or espresso interests you, hop in and say hello! The Tool A nine pronged WDT tool. This was designed for 0.4x75mm 0.35x75mm acupuncture…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Nespresso capsules holder
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
Print approx. €5.47–€6.68 excl. taxPreliminary estimate for one variant
This is a basket for the Nespresso pods. currently not printed the model but should be able to fit a good amount into it and you can scale down or up depending on your printer size. Size: 222x222x150
Print approx. €21.17–€25.87 excl. taxPreliminary estimate for one variant
Nespresso Capsule Holder - remodeled
Print approx. €7.67–€9.38 excl. taxPreliminary estimate for one variant
Wanted a better spot to put our coffeecups. 6 holes for screws. Size: 230mm x 169mm holds 24 cups. Made my wife actually happy, it might be the reason she allowed me to buy the Prusa XL. Printed mine in PETG with brim.
Print approx. €3.56–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…
Print approx. €6.87–€8.39 excl. taxPreliminary estimate for one variant
For those who either have less kitchen space, or less taste in coffee…
Print approx. €5.18–€6.33 excl. taxPreliminary estimate for one variant
This funnel has an outer lip and uses 16 magnets (4mm diameter, 2mm height) to hold onto the portafilter basket. It prints upside down without supports. Should fit most 58mm baskets. The bottom lip has a 70.2mm clearance, with a 58mm…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Hopper and tamper for use with Nespresso refillable coffee pods Printed in PLA, 0.2mm
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple funnel that makes filling coffee beans into the 1ZPresso JX-Pro grinder faster and less annoying. As it comes stock it's relatively easy to both spill beans over the side as well as having them sit in the adjustment…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine. I created this design to work with the Eureka Mignon…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Info: hook is in the shape that: it forces the cup to hang more upside down (than hanging on a simple hook) ➡️ dust is not falling inside ➡️ water drops out when wet. tight clipping to other construction very simple blender design only…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
hi, für jeden der mal Bock einen Farbwechsel der Drehgriffe hat :)! Happy printing :) print settings: PLA/PETG 3 perimeters Thanks for any feedback!
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for one variant
I needed a holder for my 58mm portafilter holder for weighing and other purposes, so I created this rather than purchase an expensive (and unnecessary) metal one. Also works with naked portafilter (which took a little work because the…
Print approx. €5.24–€6.40 excl. taxPreliminary estimate for one variant
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
Print approx. €6.77–€8.27 excl. taxPreliminary estimate for one variant
Cette boite est assemblé avec de la colle CYANOACRYLATE D'ÉTHYLE qui colle superbement bien, utiliser un cure-dent pour les petits supports et attention à vos doigts.
Print approx. €6.89–€8.42 excl. taxPreliminary estimate for PETGSource material: PET
I like a big mug, and when trying to use the ones I like, they would balance precariously on the small surface provided. I made this one and now my machine can hold the larger mugs very securely. The grill was created using a modifier (0…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for PETGSource material: PET
Replacement clip for the water reservoir of the Nespresso Krups Essenza Mini Intense machine. UPDATE 2022-08-09 Added a version to be printed in ABS, this needed slight tweak to the model. So if your fit is to loose, you can use the…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for one variant
Product improvement so water is not leaking anymore. I happend to own such a Espresso machine and it has the possibility to connect the water drain to the sewage system. The problem was that this funnel only has a 8 mm diameter at the…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
This dosing ring is designed for a 58mm portafilter. More specifically for the Gaggia protafilter but because of the wide edge it should fit on every portafilter between 58mm-66mm. It's best to print the model with supports so the edge is…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
Printed in PLA. This plunger works well with the compatible silo: https://www.printables.com/model/919556-senseo-silo-for-coffee-grind
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
I decided to remix the original one by adding the nespresso logo to both the dispenser and the socket. I have added both PRUSA MINI and MK3S gcode ready for printing. Filament Prusa Basic PLA A BRIM has also been added to make the first…
Print approx. €6.04–€7.39 excl. taxPreliminary estimate for one variant
Tapa para el recipiente de leche para poder guardarlo en la nevera
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Overview A compact, hexagonal espresso knock box designed by hakkaisha for home baristas. It provides above‑average capacity in a space‑efficient footprint, with a shallow angled opening for clean, comfortable knocks and easy emptying.…
Print approx. €33.94–€41.48 excl. taxPreliminary estimate for one variant
Unlike the original design, I flipped the drip tray and adjusted its dimensions so it stays securely in place during use and doesn’t fall out after assembly. This model is also designed to naturally return to its original position,…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Replaces the stock chute. Brings the opening closer to the portafilter so that less espresso grounds are spilled.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
I'd become bored with measuring the weight of espresso coffee beans on each shot. So I adjusted the size of a cylindrical measure to hold the number of beans that matched the 17g shot I'm used to making. The shape of the measure is to…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
I created this box lid holder for the rails to know which capsule is which, Thank you for @ochm for great design https://www.printables.com/model/195627-nespresso-vertuo-capsule-dispenser I printed with petg no support needed
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
it needs support
Print approx. €18.48–€22.58 excl. taxPreliminary estimate for one variant
Platform with 25mm height for Nespresso CitiZ to lift the cup higher so it does not splash when making a coffee. Fits into bottom center hole so it stays in a fixed position. If you have any questions or need a different height, feel free…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
I designed this holder to store my Handpresso Espresso Maker and the two filters separately so that the inside of the espresso maker can also dry when in the holder. Printed in PLA with only a few supports for the hooks on the rear side…
Print approx. €10.83–€13.23 excl. taxPreliminary estimate for one variant
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.
Update 7/5/2025 I really appreciate all the support and attention you've all given to my work. I wanted to make something that would be useful for a lot of people, and the response has been far greater than I ever expected. That said,…
This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…
i have included both stl and 3mf files for this. its 55mm height. no ams is needed cause you can print the coffee separately. printed both parts at 0,28 layer height. Archimedean chords for top layers for the coffee. slow first layer.…
I got a first-gen Nespresso machine eons back and immediately printed out some dispensers for the pods. In fact, these were some of my earlierst prints and the first functional prints allowed in the public spaces of the house. So when I…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
10/26/2022. Updated to include single piece double holder at the request of a user. The new added stl is 293mm long and is not for every printer. After getting a Nespresso coffee maker I found tons of great pod holders for the original…
Nespresso dispenser Print instructions PLA 15% infill
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Please report a portafilter or other equipment that is not fitting, plus its dimensions. The tamper station features: holding the portafilter for preparing the puck (adjustable via vertical screw) storing two bigger 51-54 mm or 58 mm…
This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…
Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…
I wanted to design a stylish capsule holder for my Nespresso machine and came up with this idea. Started to sketch in Fusion 360. Later, i searched thingiverse, if something similar exists already and found this:…
Nespresso Vertuo Capsule Drawers! Inspired heavily by the two models mentioned below, I married their concepts into one amazing Nespresso Capsule dispenser. The pictured product features 4 drawers, but you can print as many or as few as…
A nine pronged WDT tool that's printable in a business card size. This was designed for 0.35x75mm acupuncture needles with a 30mm handle. I used https://www.aliexpress.com/item/1005001467649993.html . Dull the tips of the needles on an…
For all the nespresso coffee capsules users Print Settings Supports: Yes Resolution: 0.2mm Infill: 15% Filament: Fillamentum Pla Extrafill Category: Kitchen & Dining
Update (16 Dec 2025): THØNK 2 is here! Improved in every way after two years of daily use and listening to community feedback after hundreds of prints. Now featuring a no glue, snap-in TPU knockpad. Find the THØNK 2 here! Form, function,…
A knock box for discarding your used espresso pucks. I have been using for a over a year and it seems indestructible. Print the two parts and use some super glue to hold them together. Depending on your printer they might fit tight or…
I remixed deLamorDesign's espresso knock box to change the dowel diameter from 0.75 inches to 20mm, and increased the box diameter from 100mm to 120mm. When slicing this I added a modifier region to set the infill percentage to 50% near…
Simple tamping station for Breville Barista Touch 54mm portafilter. Might work for other 54mm portafilters, but did not take different heights into account. Includes storage space for funnel and tamper. No supports or special print…
Kitchen set part 3 : Coffee capsule Dispenser (Pisa Tower) Make your your coffee tastes more Italia Compatible with all diam. 37mm capsules (Nespresso, Doce Gusto,...) 3 dispensers holes Fill the capsule tower from above Print as many…
Features No support Minimal filament 5g (54mm) 7g (58mm) Compatibility 54mm (untested) 58mm/58.5mm (tested on Decent Espresso and VST Precision Filter Baskets) Print Settings PrusaSlicer 0.15mm quality with 0.4mm nozzle
Print just the tower part if you want, or if you want rotation, print the two turntable parts also. It uses a 608 bearing. The towers on the original one felt a little flimsy so I added some more structure between them that should fix the…
.2mm layer height; .4mm nozzle; PLA 4 or more perimeters and infill whatever you want.
Printed with tamper side to the build plate with supports.
A simple tool for mess-free grinding, dosing and even distribution of coffee grounds in espresso baskets before tamping. The tool consists of two rings that are screwed together with a variable number and sizes of spacers between them to…
Turnable Nespresso Tower in two versions: Standard Version to store 42 capsules Extended Version to store 60 capsules Optional Covers There are a few different covers you can choose: blank cover with text: Coffee Time with coffee cup 3…
I present the spring loaded Coffee/Espresso tamper gadget: easily compact your coffee grind with your own assembled tamper apparatus to make your espresso with style! Available for 49 - 58 mm portafilters. The handle, spring holder and…
Remixed model of the Nespresso Capsule Holder from @mibla_44019 Removed the physical supports that were there in the original model since they were not useful and every 3d printers are capable to do the small bridges. I hope it'll be…
Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro espresso machine. I designed the snap on the lever which no tool is required for installation. Due to its snap-on design, I…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the Handle and Spin Ring parts without the countersink. This allows the use of non-flathead/countersunk screws. enable support for the handle…
Doll House 50 bar Espresso Maker / Coffee Machine. 50 bar? why not. g-code not necessarily to scale. Please resize to your scale.
Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…
A fun project I spent a lot of time tuning. I'm a metal worker so this was a challenge for me to design the smooth shapes. The Design Goals: An offset knock bar Professional look Low overall price Printable After many revisions this is my…
My first take on building my own sensor for presence detection in our rooms. All cases I tried either didn't fit the board or weren't able to house the sensors. So I designed one myself. It fits the AZDelivery ESP32 NodeMCU…
You can mount this print under a cabinet with double sided tape or mount it vertically against your wall. When its mounted just slide your capsules onto the “railes” Print Settings Material: Pla Layer height: 0.30mm Supports: No Print…
Background Inspired by Arabic Girih patterns and sawblades this tool is both good looking and efficient. The grip is an eight-pointed star this makes it easy to grip and twist. Design notes The diameter for all these models are 58mm, this…
I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…
Nespresso Vertuo Pod holder/rails. They are keyed to connect together. Can be mounted vertically or horizontally. The image shown is horizontally mounted on the underside of a wall cabinet - hidden from view. Pods are easily slid in and…
This model was inspired by this design , but slightly more compact and with more options for numbers of columns. I also added some horizontal supports to make sure sure that the holder doesn't bend since the clearances are pretty tight…
Snug fit for Delonghi and other 51mm portafilters. .2mm layer height, extra perimeters. Food safe at your own risk.
Nespresso Vertuo pack holder. Prints in two sections which can be glued together and should hold an entire package of Nespresso Vertuo pods.
A quite minimalistic holder for Nespresso capsules. Holds 5x4 capsules. Print instructions Prints without supports as is.
Please print with food safe filament like PETG. Matching neodym magnets: Shape: disc Diameter (D) 5mm Height (H) 5mm Tolerances +/-0.1 mm May not fit to all VST-Baskets. Please check the outer diameter, should less or near 70mm. (see…
WDT espresso tool with magnetic stand. 3x2mm magnet for stand
Printed on the BambuLab P1P with extrudr PLA NX2 black I used a standard profile with a layer height of 0,16 mm with an 0,4 nozzle and 15% infill. On the photo you can see that I forgot to add support elements at the bottom of the…
Stand or holder for your puck screens generally sized for 58mm portafilters. This was sized specifically for the Flair58 puck screens although may work for other puck screens of similar size. Flair58 pucks screens measure at 58.4mm dia…
Printing Any material should be fine --it's not designed to hold food items or be subjected to heat/pressure. I used PETG, but that was to match the filament I used for the tamping stand and portafilter dosing funnel, which are subjected…
My remix of http://www.thingiverse.com/thing:341809 Don't forget to like the original if you like this one! :) Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator (5th Generation) Rafts: Yes Supports: No Resolution: 0.20…
TL;DR : Recycle your Nespresso capsules. Easily, safely, hassle and mess free. Quick guide on how to use it: https://www.youtube.com/watch?v=yUxY0kESfBE (The unit featured is a prototype. Uploaded version have size adjusted propelly).…
This new bigger model is designed for new nespresso capsules. There are 3 sizes. This was designed for EU market (Czech) - maybe there are other sizes.
Remixed from another model on Thingiverse, I made a number of small changes to improve on the design. This model still uses the original top part for the drip tray. In the previous design, drips would be trapped in between the tray cover…
Description Transform your coffee corner with this innovative Expandable 3D-Printed Nespresso Capsule Holder , designed to grow with your love for Nespresso flavors. Crafted with functionality and elegance in mind, this modular storage…
This is a capsule holder for the Nespresso Vertuo capsules. The assembly is made using an M8 bolt and nut as well as a 608 bearing and 8 4x1.5 magnets. I paused the print to place the M8 nut and magnets as shown in the last couple of…
A Nespresso capsule organizer which can be attached to a wall or ceiling surface. This is a small variation from an existing model. I wanted to have an indentation to place a two side tape to make it “Invisible” This is a remix of…
Overview Inspired by the Weber Workshops blind shaker , I have created a 3D-printable version for those of us who want to experiment with a different distribution method! This tool is intended to help homogenize grounds via agitation.…
The fourth thing in my Week of Things, some useful, some just for fun. Thought this would force me to post some of my projects. Most are semi useful/functional and some are purely inspirational. After getting a Gaggia Classic espresso…
Espresso tamper - what else to say? Of course it is not as fancy as steel one but you can't print steel, right? According to my tests this works just as well and you can cheapy and easily test different tamper styles - flat/ripple/curved…
This tamper guide makes your ground coffee flat, so earth can stay round! It is a really tight fit on the tamper, so no screws needed. Print it on PLA or PETG. No support needed! (The inside of the model ends in a cone, so you can print…
![Nespresso CitiZ Cup Platform [No splashing]](https://media.printables.com/media/prints/dca0da2e-8cd2-4acf-b2fa-143e065ff519/images/11938791_5519e87d-7a7d-4780-9048-79a02fc45567_f67606ad-f57a-489b-9c37-46452b94e57e/img_7881.png)
