Counting matching models…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…
Description Creality K1 and other printers. Belt tension meter to adjust belts at same and correct tension. If you print it right, when the needle is in the middle, the belts tension should be at 110hz. Settings: Nozzle: 0.4 Line height:…
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
Traced the most recent Fortnite Peter Medallion in Fusion 360.
Inspired by my Chessex dice set, I modeled all of the dies to scale, and featured the easily printable font Comic Sans. The dice are sized to easily print on any reasonably sized printer. Printing them at 100% infill, they are so fun to…
This Combination of Several Test Print Patterns Will Save a lot of Time Tuning your Printer. You can choose between two variants: 1.) A slightly remixed version of the original model (e.g. now including a squasing test) I made for more…
Gridfinity addicts, rejoice! Now you can bring your favorite organization system to the messiest place in your home: the Kitchen! In the collection, you will find various different models for various different sized utensils. The models…
Mini compact shoe horn to clip on your shoes and protect them, easy to to print and slip in!
This Cuban chain model is setup in a fully parameterized fashion, so that you can open it up in Fusion360 and change it to be whatever length or shape you need. Two versions are provided. The spiral approach allows for an impressively…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
This was inspired by the original Laundry Detergent Cup Drain and modeled from scratch in Fusion 360. As is, it fits the new Tide bottle, but the model is fully parametric and therefore can be adjusted to fit other detergent brands. It…
Simple yet strong hook, perfect for hanging clothes, towels, bags, and more. The beveled edges are optimized for a great first-print result and to ensure they won’t damage fabrics. If you’d like to support my work, leaving a ♡ like ♥ or…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
You like 🥰 the KID'nR filament spool silica gel boxes, but your spools don't fit as they have a larger inner core diameter? Here it is the KID'nR XL : All the features as the standard model but now for spools from 56mm - 90mm inner core…
It's a two-metre version of my low-poly world map, and the biggest printing project I've done so far. It took me a couple of months and about 5kg of filament to print (including some failed prints). It is quite easy to print. Just print…
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Great small gift idea for bike lovers or demo print for newcomers. Prints fast & Easy. The ones is the pic are 0.4Lh. If you feel this is too small for your liking, feel free to modify scale in your slicer software. This is very quick and…
Combined the ams desiccant tray and the Dry Pod with hydrometer models into a single print. A day after setting this up with fresh desiccant beads ( https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details ) the…
This model is compatible with the lego system.
The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…
Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…
UPDATE: Please print the Updated stl file since some slicers have issues printing the top circle. :)
A modern take on a simple container with a screw top lid, that utilizes a threading style similar to a mason jar - making for an easy print, nice feel, and smooth use. A great accessory for stylishly organizing things in your bathroom,…
01.09.2025: Danke @GBorni von Makerworld für das Erstellen des gif deines fertigen Aperolinos in Aktion! Das zeigt doch sehr gut allen wie simple es dann abläuft! 11.11.2024: Stößelaufnahme mit kleinerem Durchmesser von -0,15mm für das…
Print your own 3D printer filament Dry Box! Check out this video I made about it, including assembly instructions: Parts are optimized to work best with PLA filament. Easy printing, no support material needed. Snap-fit rollers, hygrometer…
(WARNING) ONLY IMAGE IS AI NOT THE MODEL!!! IMAGE WONT ALWAYS SHOW MODEL AS IS, SO THERE MIGHT BE SOME MISTAKES ON THE COVER IMAGE NOT THE MODEL!!! Best use on
Mario was printed at 400% magnification.
Peter Griffin. Added peter4.obj and peter4.3mf as possible fixes. I cleaned up around the neck. I will leave the older files up which seem to be working just fine as well. Just in case the newer ones have issues. Some Duplex fold over…
IMPORTANT: One file uses a PrusaSlicer box modifier on the clip portion. If you use another slicer, this box will physically print out in place of the clip. Use the other 3MF file. The clip portion requires you to slow down for the…
Print settings : 20% infill 3 walls
A practical probe holder designed to keep multimeter test leads firmly in place while working on electronics, microcontrollers, PCBs, and electrical circuits. It acts as an extra hand, allowing users to perform measurements more…
Designed in Fusion, a hanging shelf for the detergent measuring cup of a 150fl oz Tide (or similar) detergent container to catch drips and easy hold while measuring. It should fit any bottle of this type where the ring it sets onto is…
A set of printable concrete barriers with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm and heroic scale wargaming. Dimensions: Height: 24.5mm Width: 24.5mm Lenght: 50mm FDM friendly and…
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
This is a stand for the round common Hygrometers. I designed it specifically to fit into the middle of the Bambulab AMS (tested with new version, bought in 2023). Of course it can also stand alone anywhere else. Secure fit, Hygrometer…
After the success of the Ghost Booh for Halloween 2022 https://www.printables.com/fr/model/291519-ghost-booh You will love The Ghosts Booh crocheted for this Halloween 2023 ! This time 2 different versions : With or without a smile And of…
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
This is the VaseRose_5cm and the stem_final stl's merged together in PrusaSlicer 2.6. With a slight trim of the stem to fit in the build volume of my Prusa Mini. It has a helper disk for stability. PrusaSlicer was nice enough to alert me…
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
This is my Stargate intended to be mounted on a wall. The gate is 80cm in diameter and it comes with separable Iris. The inner ring rotates and it has a preparation for eventual lihting. It is a kit and theoretically does not require any…
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
I had changed all my box to v3, please use my AMS dry box center v3.3mf for print. If the hygrometer(some is so big) is a little small, please use same paper to fit it(I used it in photos). For drying Bambu AMS box, you can directly add…
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
Best Print this with custom supports Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.2 Infill: 5% Filament: Prusament PLA Grey Category: Art
It's a one-metre version of my low-poly world map ( bigger version (the real images show the two-metre version)) It is quite easy to print. Just print each individual files. Use the last picture, which shows how the parts come together,…
Please see original post on GitHub for thorough description, manual and instructions. Geometrically this is the same as the original and the gauge/meter will read just as the first one. Additional BOM: 4- M3x10x4mm bearings (623-2RS), no…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
I added a tolerance of 0.2 mm to the thread diameter in order to compensate for printer tolerances. Print with small layer height, e.g. a maximum of 0.15 mm for a 0.4 mm nozzle. Please find screws for the nuts here:…
Original part : https://www.thingiverse.com/thing:2627417/files
The mockup available only has the external shell and lacks any of the gearbox elements that would allow interesting repacks to be designed like what has been done for Sherpa mini and HGX extruders. I completed the CAD based on…
The listed diameter in file names refers to the inner diameter of each piece, allowing precise cable organization. When printing, be sure to add a brim at the base to ensure secure adhesion to the print bed. With the Prusa MK4S, no…
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
A filament dry box that mounts to the side of the Elegoo Centauri carbon based on the design of @NaNO3 which was originally based on @Yanev 's parametric toolbox. I have included versions for the lid that work with or without the addition…
This is a set of containers for the Everdell board game, specifically the complete collection from Kickstarter. The tray has room for all the tokens, and also includes space for each container! I decided to make my own, so basically I…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…
This Peterbilt 359-inspired truck is made in such a way that allows it to be printed all in one piece. Once it's done, you can pop it off your buildplate and play with it. The wheels spin, the hood opens and the sleeper cab door on one…
NEW v100a CLASP up NOW!! Enjoy! New v100a files up now! I took a long enough break to finally have a new idea! I can now present a version that can't kink up but still moves like a chain! It's a little thicker/chunkier, but the profile is…
Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…
Video of the finished bearing on Instagram: https://www.instagram.com/p/BPA0LYlDdlO/ I wanted to create my own ball bearings for my filament rolls, and have experimented with the details. The outcome is this design, which is ready to…
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print. For Batch 3 I modified the base. Enjoy it! Any…
December 2024 A friend showed me a twisty cone that she liked the look of. https://www.printables.com/model/927393-spiral-cone-fidget-toy The original is too loud for my taste, so I started from scratch in Fusion and found that mesh…
Untested work in progress
What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) You may ask, "Why make such a sad/upset Spider-Man?" I really couldn't tell you. Sometimes ideas just pop out of nowhere from your…
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the printbed. Click here for a smaller version of this stand! If you like check out my other designs too!
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no For two colors add a color change Calibrated with my favorite pasta Barilla Spaghetti no 5 (also works for all other spaghetti).
A simple plant clip can be used on tomatoes or any other filigree stems. Great to make a use of small leftovers from different filaments.
Hi guys, i just made a CAD File of the TBS Source One V5. Feel free to use it. Tip me a cofee if you want to: paypal.me/richi241
A set of printable tall concrete barriers with a little gothic twist. These are high enough to obscure most Heroic -scale infantry models. Four different levels of battle damage to mix things up. Perfect for 28mm and heroic scale…
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
A simple yet super useful little bracket with a lot of strength. Works perfectly for reinforcing corner joints in wooden structures such as shelving units, boxes, and whatever has 90 degree corners that can hold screws or bolts. I use…
I just made a very slight modification to an already fantastic design by davwilso. The new cup that Tide supplies has a larger diameter so it no longer fit in the original design. I I just added a wider lip at the top to contain the new…
This is a detailed 3D model of a rose, perfect as a decorative piece or a gift for special occasions like Valentine’s Day, Mother’s Day, or anniversaries. You can print the rose in two ways : Single-color version : Print the entire model…
This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…
A Knob with knurled surface for Potentiometers with 6mm round axle. Slim 15mm diameter design. Prints well on an FDM printer with 0.1mm layer height. Ironing for the top surface is recommended. Print with shaft side downwards and colour…
Complete set of metric nuts. The improved thread design does not require consideration of printer tolerances any longer - at least as far as the nuts are big eough for the printer. Print with low layer thickness, e.g. with a layer…
A design I came up with while teaching myself a new design program. It is meant to be printed in vase mode. I have only printed it at 50% scale so far and have had no problems.
The source marked this model as adult content.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
CAD file . The supplied models are separated based on meter width, in this case 19mm and 21mm, close to the most common widths, at least from what i could find, i had a 19mm. These values are the maximum meter width that will fit. If you…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
If You have some nearly empty spools laying around, you can print some of these mixing spatulas with the infamous last meters. They come in handy for mixing 2 part compound adhesives, glues and sealants. I have alway some spare laying…
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
The InFiDEL is a cheap (< $5) filament diameter sensor that can be calibrated to provide surprisingly precise filament diameter readings in real-time. While firmware support is currently sparse, the idea is to use the sensor to correct…
This safety eyes need to be printed with low layer height (0.1mm) to achieve a nice result. The eyes are made from two different parts for ease of printing (the rod and the head) that need to be glued together, and also it make it easy to…
Another remix with better unions between body and head.
After seeing @i6o6 “Simplest cable organizer” , I feel in love with the idea of a dead simple cable organization system but ended up wondering if I could make a similar model that would be suitable to be printed extremely quickly using a…
Introducing the FDM (Fixum Dude Motors) print in place concrete truck. The wheels and the concrete mixing drum rotate right off the build plate. V2 has newer stronger axles. Find the entire FDM Vehicle Collection here:…
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. In case you have the injection moulded part delivered with your Original Prusa MK3S+ printer, check the alternate version:…
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone This is a collection of three of my projects in one place - “ A1 Series - Toolhead Cable Guide”, “A1…
🧼 Detergent Wash Cup – Clean & Easy Powder Scooping! This detergent scoop was designed to make powder dosing simple and mess-free! With its ergonomic handle, you can easily grab and scoop detergent without spills or sticky packaging.…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed the "Complete Purge System" in two versions for Bambu Lab A1 Series printers. The first…
Red wasps are very territorial… Anyone that's been stung by one knows that (ask me how I know)! But that doesn't mean you have to give up your territory for them! Preventing them can be as easy as creating a false nest! 🤯 Place these…
My first attempt at iPhone 15 case. My daughter got a new phone, and the case (ordered online) was not due to arrive for a couple of days. I had a reel of flexible PLA, and figured that I could print one. But I couldn't find any existing…
This design stores the laundry detergent cup for Tide and Gain brand liquid laundry detergent containers and drains excess leftover soap back into the container. Single print design (Print in Place) Fits North American Tide and Gain 4.43L…
