Counting matching models…
Achieve precise mortise centering on 12mm stock instead of the lowest 16mm setting the tool offers out of the box with this custom jig designed for the Festool Domino DF500. Perfect for non-structural projects, small boxes, and other fine…
Die Drehgriffe findet Ihr hier: https://www.printables.com/de/model/502882-sterngriff-knauf
Festool Domino DF500 Dust Extractor Cam Lock Adapter with Twist Lock 25 degree angle allows extractor host to be offset Printed in PETG @ 0.3mm
Dock for your Festool DF500 Domino. Allows you to have both hands free for cutting mortises in smaller work peices.
Dock for holding the DF500 up, to the MFT3 table aluminium profile. Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail. The DF500 slides and is held tight…
Portable refracting telescope. (lens : 80mm F500) Includes cradle and focuser. << For dual focuser assembly, please refer to the link below >> https://www.printables.com/model/1385830-dual-speed41-focuser << File name convention >>…
This upgraded angle plate for the Festool Domino DF500 or DF 700 provides a better stability and rigidity than the factory version. The file JOINT can be printed in TPU to hold the 2 M5 screws. Category: Parts
The minimum plunge depth of the Festool Domino DF500 joining machine is 12mm when using any Domino size other than 4mm. When joining material to the face of 12mm plywood a plunge depth of less than 12mm is desired. This attachment for the…
Another glue spreader for the festool Domino DF500. I Made it to suit to our glue bottles from Ponal. Using this glue spreader only makes sense if you do bigger glue ups… for one or two domninos, the cleaning afford is to much…. With a…
Ein Adapter von osVAC neo auf Festool z.B. Dominofräse DF500
Festool DF500 bit Holder print with tow colors infill : 20% layer hight : 0.20mm ( Quality )
I needed a way to easily store and grab my studfinder but I'm totally out of drawer space, so on the wall it went. I'm by no means a talented or trained CAD designer, this was made in TinkerCAD. It needs minimal supports, just to support…
This is a 3d printable replacement for the Stepcraft vacuum adapter for HF500 spindle made in 2019. In my case a Stepcraft D840. I was having clogging issues with the original one when cutting MDF so I redesigned it to make the internal…
Handle for DF500 to improve handling. Slide on the back of the domino. Printed in Atomic PETG Neon Green An ergonomic handle is harder than I thought. Size can be tuned in the enclosed Fusion .f3d file.
I have a lot of Dewalt tools and they all have a standard attachment compatible with DWV9000 quick connect vacuum adapter. Couldn't find one that attached to the domino so I designed one.
Allows for depth stops shallower than the 12mm minimum depth provided by the standard depth stops on the DF500. Includes: 10mm, 8mm, 6mm and 2mm I printed this in PETG. The stops can be easily snapped on or off the pull rod by hand.…
These are a pair of well-fitted mounting brackets to wall-mount a Mayflash F500. Modeled in Onshape, they match the angles of the body of the joystick and hold it flush against the wall. I printed in PETG with 0.2mm layers, but PLA should…
Dass man die Fräse nicht von unten absaugen kann, schränkt die Möglichkeiten stark ein. Besonders wenn man eine Frässpindel für Fräser mit 8 oder 12mm Schaft benutzen möchte! Gratnuten und verdeckte Nuten können so nicht gefräst werden!…
Follow the Replacement instructions to replace the metric depth stop. Printed in Atomic Carbon PETG PRO .
made for RYOBI ESF5002 Studfinder used with HSW (Honeycomb Storage Wall) Slide Mount supports: Yes
Attach the base to a piece of plywood or any flat board and clamp vertically or horizontally. If you print with the plastic that shrinks (ABS/ASA), you want to scale the model 1-2% up ( the model printed as-is in ABS is a very tight fit…
Gridfinity holder for the five cutter bits for the Festool Domino DF500. The holders are labeled 4mm, 5mm, 6mm, 8mm, and 10mm. The gridfinity base is the standard 42mm size and is 1 unit x 2 units. It also has 2x6mm holes for magnets.
Model The FCStd-files have been made with FreeCAD 0.18. Print Settings Nothing specific. Lessons' Learned I've printed the first test with 10% and 2D-grid infill pattern and while tightening, I could hear the first crackling noise. So -…
This is a mount for Raspberry Pi 4 and Armour case for the open mower project. Fits in a YardForce classic 500 mower. You can also mount the Pololu AltIMU-10v5 but i do not recommend at because auf interference. Use M3 for the clip3 Use…
We have a OXELO Freestylestep MF500 step for the kids. While it's a good and sturdy step, braking takes quite a lot of force/weight. The kids have to press really hard on the brake metal before it even touches the wheel, therefore…
I realized that I was going to lose the attachments for my Dewalt DCF500 so I designed this bracket which would keep them together, visible and could clip to the ratchet when it was not being used. Printed in PLA with no supports. Version…
Držák filtrů na vodu (viz foto). Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.25 Infill: 80% Filament: PET-G, ASA, ABS... Category: Bathroom
Vertical stand for Mayflash F500 Fight Stick (and maybe F500-Flat) Recommend using 3 wall loop, 15% infill, and Gyroid pattern.Vertical stand for Mayflash F500 Fight Stick (and maybe F500-Flat) Recommend using 3 wall loop, 15% infill, and…
Printed with supports on the bottom of the fins, I used 3M double sided tape. Gluing is probably a more secure approach.
Felder KF500 Dust Extraction Adapter for use with shank cutters. Enhances safety and provides a dust extraction connection for a 30mm hose.
Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file
Manually paint the support on the hinge area as well as the latch. Make the layer height as small as possible.
I wanted to be able to remove the spindle without cutting any cable ties, but still keep the cable and air hose out of the way of the machine's motion. To be printed in PETG (PLA could deform if the stepper gets hot) standing vertically…
More Information I designed these mounts to ensure the scooter's battery pack is held securely and rigidly in place. The model features dedicated slots for zip ties at both the front and the back for extra security. For reference, the…
I needed these for my Domino cutters, so I remixed the great original.
Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file
Attach the base to a piece of plywood or any flat board and clamp vertically or horizontally. If you print with the plastic that shrinks (ABS/ASA), you want to scale the model 1-2% up ( the model printed as-is in ABS is a very tight fit…
Printed with supports on the bottom of the fins, I used 3M double sided tape. Gluing is probably a more secure approach.
