Counting matching models…
EN: Prevents fogging of glasses and suction of unfiltered air around the nose. Different sizes. CZ: Zabraňuje zamlžování brýlí a přisávaní nefiltrovaného vzduchu okolo nosu EN:Instructions for comfortable and SAFE wearing Face Mask…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
I recommend brim .
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Who doesn't want a Dwayne Johnson head for their Lucky 13? That's right! Everyone wants one! And now YOU can have one! Scaled to harmonize with the proportions of Lucky 13. And sliced diagonally at the back, because it looks good! Remixed…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
A cute little model of our favorite game mascot - the lizard doggo😍 The stl file is so large bcs it's a very detailed model and i was too lazy to do anything about it xD Oh and be careful when removing supports I broke both of the doggo's…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Flipped Buhler's print in the X axis so the final product has the nice texture of the print bed facing the viewer rather than the topmost layer of the print (which always has nozzle scratches). Also scaled to 125% then rotated to still…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
A bunch of cute little animal pals to help hold your papers or perhaps mark a page in your favorite book. Great for using up those small bits of filament left on your roll. These are ready for print, no supports etc. If you're one of…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Tested to work nicely on Varjo Aero headset. Don't use PLA as it will make the mounting fingers too fragile. Printed in vertical orientation with generous supports. Update about XR-3: This occludes the LiDAR in the center and can leave a…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for PETGSource material: PET
🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Backscratcher inspired by the facehuggers from the Alien movies. I printed it using soluble supports since it's relatively thin.
Print approx. €10.31–€12.60 excl. taxPreliminary estimate for one variant
Update 2022-07-19: There's now a generic version of the vent adapter which attaches using zip ties, and two different nozzles (45 degrees and 60 degrees). This is an adapter system that clips on to the rear centre console vent and…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for PETGSource material: PET
Smiley Face Keychain
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…
Print approx. €4.99–€6.09 excl. taxPreliminary estimate for PETGSource material: PET
I have included my project files for each of these, but you are welcome to use and/or change them in any way you’d like. All I ask is that if you redistribute them, please mention me as the original creator. If you decide to sell them,…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Es kann supportfrei auf einem XL Drucker gedruckt werden. Leider ist es zu gross für einen MK Drucker. Bitte mit PETG, ASA oder ähnlich Drucken, PLA wird sich im Sommer verformen. Wenn eine andere Fachunterteilung gewünscht wird, bitte in…
Print approx. €17.68–€21.61 excl. taxPreliminary estimate for PETGSource material: PET
This is a clock face inspired by the Rolex Submariner. Diameter of the face is 160mm. The hole is designed for 8mm shafts. I didn't add the Rolex crone or lettering to not violate copyrights, but with a little research in the WWW and a…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for PETGSource material: PET
A convenient storage solution for your Kill Team card deck and the tokens for it. Stackable to optimize space usage during play. Use 4 5 x 1.7 mm magnets. Edit 03.08.2026: Added alternative model with magnets between the token and card…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
it´s a very simple hook to use it for decoration.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Alien Carved Artifact
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for one variant
I was looking for a way to have my Starlink Dish mounted on a fence post at my property and could not find anything suitable so I created my V1 Dishy Fence Post Mount for the Gen 1 version. NOW, thanks to the unwanted attention of some…
Print approx. €6.90–€8.44 excl. taxPreliminary estimate for PETGSource material: PET
I was asked by a nurse friend to fill the visor gap so she can use the visors I am making and read that the prusa solution easily fell out and decided to give it a try... This is still a work in progress but so far version 2 seems to work…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
ein Sieb ohne großen Konstruktionsaufwand drucken Print instructions Einen Körper im Slicer laden (hier ein Zylinder mit Ø 60 mm). Infillform auswählen, Deck- und Bodenschichten auf Null stellen. Die Maschenweite über die %-Einstellung…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Hallo, habe im Internet so ein AVM Fritzbox Rackmount gesehen gehabt und fand das ganz cool also eben selbst eines gezeichnet. Habe auch für einen gekauften Fachboden, nur die Keystone Halter mit hochgeladen, und eine Kappe um die Löcher…
Print approx. €23.00–€28.11 excl. taxPreliminary estimate for one variant
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
ideal for 12mm ptouch labels PETG slow speed, hotbed 90/80 the gcode file is for 12 pieces print
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
An extremely light and confortable face shield that can be printed in less than 40 minutes using the provided gcodes on a MK3/S and that is compatible with stacks. Print instructions This face shield has been inspired by the excellent…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Einfacher Kopfhörehalter für Wand oder Regal. Befestigung mittels 2 Schrauben oder per doppelseitigem Klebeband.
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET
The 3-way charging cable table mount let you optimize your office table space. Due to the table mount you have quick ans easy access to your charging cables without looking for them under your table. Attention: If you print the table…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Only dimensional adaptation for MS Surface Laptop 4/5 15" Width 11,2mm
Print approx. €3.50–€4.27 excl. taxPreliminary estimate for one variant
No-Face is a character from the movie Spirited Away. He is a lonely spirit that gets attached to Chihiro and starts following her everywhere. Spirited Away is a movie from Studio Ghibli. Printing Advice This model was designed on Nomad…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
This is a testprint for finding the best possible shine and surface quality for a filament. I found this to be especially important for silk filaments. Too small layers might not shine that well. The model can be used with temperature…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Slim Bumper version of the Surface Duo 1 bumper I uploaded. This is based off someone that owned a Duo 1 in which they were fine with the fit. This is two sets of bumpers. One leaves the button area and all the usb area open. The other…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
model BMW e46 Touring facelift keychain
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…
Print approx. €6.37–€7.79 excl. taxPreliminary estimate for PETGSource material: PET
Please read this information carefully before printing! There are different clock movements and each one is designed a little differently. Therefore, the attachment methods may be different. Also, each printer is tuned a little…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
You may have seen the optical illusion that looks like a vase in the middle, but each side shows the profile of a face. This is called a Rubin Vase and you can read more about it here: https://en.wikipedia.org/wiki/Rubin_vase This model…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
I needed a Rituals fragrance dispenser holder for my Mercedes Benz V-Class (facelift, model year 2025) with the central ventilation slots. My holder is used instead of the original holder and is attached to the plastic bars on the back of…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Straightforward and reasonably quick print with 0.3mm default settings. Supports required under mounting wings. 0.150" holes for screws. Shown here in Flashforge Rainbow PLA. The power supply has the same dimensions as the dock itself and…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for one variant
Einfacher Becher fürs Hundefutter, nur 8cm Durchmesser dadurch ist er für Aufbewahrungsbehälter mit kleinen Öffnungen gut geeignet
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Hi didn't want to cut holes in to my gyprock walls (dry walls for those in the US) to mount my TP-LINK EAP-655wall wifi access points. You either need the incoming POE ethernet cable coming out of the wall or you'll need a 90° patch lead…
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant
This is a ESPHome based Hichi/Volkszähler interface specifically for the Holley DTZ541 that has alignment pins instead of the more common round indent around the IR interface. UPDATE 2023-01-29 Previously mentioned issues with the…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Version 1.1 released May 20 2024 These 5FFG's (5 Face Radius gauges) are a ripper! The gauge I was using struggles to make accurate inside (concave) fillet measurements. In the end the gauge allowed me to only approximate the dimension…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
Boitier adaptation pour fixer un boitier d'interphone Aiphone encastré en version saillie. Besoin de 4 écrous M4 (Inox recommandé) Filament PETG Hauteur de couche 0.3mm Remplissage principal 15% mode grille Remplissage de la zone (en…
Print approx. €6.34–€7.75 excl. taxPreliminary estimate for PETGSource material: PET
Read carefully before downloading the model!!! Very simple clock faces (clock dials), set of eight, two colours Model 67 has got three colours. I prepared four variants of the dial: A is round, measuring 20 cm, B is a wide oval 24x20 cm,…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Facom sets come in 5 pieces. In my case five straight flat screwdrivers and two PZ- in three PH screwdrivers. Fun to make a rack with perfect fitting for each screwdriver individually. The printfile Rack_3A is for the flat screwdrivers,…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Krytky pouze hladké - přilepeny kvalitní oboustrankou - tisteno na skle Covers - use with doublesided tape-printed on glass
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
This stand adapted for Microsoft Surface Go laptops. It includes engraved low-poly foxes. If you change the filament color at layer 11 you'll have a nice effect like in the picture.
Print approx. €8.57–€10.47 excl. taxPreliminary estimate for one variant
Ein Trenner um das Fach in der Tür zu unterteilen. Ich habe noch etwas Filz auf der Innenseite angeklebt - sitzt mit Druck und kann aber auch noch verschoben werden.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Here is my variant of a face mask ear saver. You can thread one side through the holes to fix the mask permanent. Use the hook on the other side to release the mask faster. PLA is flexible enough, but other materials should work also. It…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Here lies the instructions to build, assemble and program a compact, modular and fully enclosed 3D printed split flap display.
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Hi guys! This is a faceplate designed by me for our old first GameBoy DMG-01! For FDM printing, please use supports on the buildplate! UPDATE 30/04/2023: added the .gcode ready to print with supports! If you like, please press it :D
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Stop Block For position #1 using SpringFactory v1.2.1 https://grabcad.com/library/springfactory-v1-2-1 Stop block inserts into #1 on the base. Front stop should be right up against / touching the bending mandrel base. The front edge could…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
20 cm, two colours / three colours: two variants
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
The 3D preview on this site shows the negative objects as part of the model, but don’t worry — the model is designed correctly 😄 The preview here is very approximate. I also added a screenshot showing how it looks after slicing/rendering…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement front face plate for the DeskPi Pro case with a cutout for a FFC Pi Camera cable. This is a drop in replacement for the existing face plate allowing you to route the camera cable from inside the case, over the USB…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
When changing to a Mean Well NES-350-24 power supply, I realized that the plug socket and switch housing was not going to fit nicely due to the orientation of the screw contact terminals on this power suply. This cover gives more space…
Print approx. €6.63–€8.11 excl. taxPreliminary estimate for PETGSource material: PET
Simple and prints quickly (~10 minutes on my printer). This keychain is based off of a picture I took of my rally style GT86 so it is lifted slightly and dimensions may be off by a bit. About 2 3/4" x 1" x 1/8" for the original model…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
A cover for the Sony Multi Interface Shoe that allows for a Lapel microphone to be clipped on and attached. Protects the digital pins by covering them. The cover does not touch the pins at all. Should work with all lapel microphones with…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Das ist ein einfacher Löffel. Wir benutzen ihn, um Vogelfutter in ein Vogelhäuschen zu geben. Im Gegensatz zu unserer alten Version ist der Stiel ca. 100 mm lang, die Stielbefestigung verstärkt und der Durchmesser etwas größer. Der Boden…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
your kids favorite super hero or something.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Eine Einfache Kleine Honycob Teebox zum Aufbewahren von bereits Eingepackten Teebeuteln. Wurde noch nicht getestet!!!!
Print approx. €8.84–€10.81 excl. taxPreliminary estimate for one variant
I couldn't find cases for the style of FFP2 mask that is currently quite common at least in my country so I ended up designing my own. The model consists of two parts, the bottom and the lid and they are held together with magnets (4x2 mm…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
alcohol coaster
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
A 0.625" diameter button in US Standard units. Round face with a filleted edge.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Had a 2-gang box where I wanted to mount the NSPanel Pro, requires a less-than-half faceplate to cover the rest of the hole. Included is both a standard faceplate with screws, and a screwless one (two parts) Screwless option requires you…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
For our little fir tree we needed a halloween custome! ;-) I used the multicolor functionality of my Prusa XL printer.
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Angry face fridge magnet with 5 color changes in 4 extruders in the first layer and a fifth extruder for one stop to insert the magnets so they remain invisible. Helpful Tip: Reduce the speed to 50% on the first layer Hueco para imanes…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
This is Coin Box for Tesla model 3 after facelift in center panel. It contains larger grooves for bigger coins and smaller one too. It prevents them to slide when driving. Container next to it has rounded bottom so it is easier to take…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for one variant
Um meine Gesichtsmasken (ich nutze zumeist 2-3 Stück im Wechsel) bei der Arbeit vernünftig aufhängen zu können, habe ich die Dicke der Tischplatte ausgemessen, sie beträgt 2,5 cm und mir dann diese Halterung mit Haken gestaltet und…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Plain face plate 7F (7in/5) for RACKRPI 2U 19in rack. Compatible with Eurorack standard.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Plain face plate 3F (3in/5) for RACKRPI 2U 19in rack. Compatible with Eurorack standard.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Soportes de calefactor para fijar en la pared
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for PETGSource material: PET
As we conclude the 10 Years celebration of MiniWorld3D , we want to create a series based on gratefulness to brands that have been in our journey through this time, an acknowledgement to everyone who has been involved at some point and in…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Ein Trenner um das Fach in der Tür zu unterteilen und die Warnweste an Ort und Stelle zu halten. Ich habe noch etwas Filz auf der Innenseite angeklebt - sitzt mit Druck und kann aber auch noch verschoben werden.
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
Fun blender sculpting practice. Printed at 700% scale.
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
ich habe durch meine eigene Situation einen einfachen spulenhalter gedruckt der an einen 18mm Fachboden passt
Print approx. €5.14–€6.28 excl. taxPreliminary estimate for one variant
My toddler kept pushing and tipping the soundbar, so I designed this bracket to hold it in place. Simply print two copies of this bracket, use the soundbar's included screws to attach them, and use your favorite double-sided tape (like 3M…
Print approx. €2.58–€3.16 excl. taxPreliminary estimate for PETGSource material: PET
I use the mesh face shield and face shield bracket for a full brim MSA helmet when running a chainsaw. When I raise and lower the shield, as well as wacking though branches, the corners of the mesh shield pop out from the frame. This…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Model of a cube with an edge length of 4 cm. A closed spatial polyline is created on the surface of the model of a cube.
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
100x160mm sign, with art of a manager type person, reading "Do Not Confuse Me with Facts" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. On May 14 2020, this RC3 version received the CE certification and it complies with…
1h 20min per pcs Stacking versions of Prusa Protective Face Shield - RC3 A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. Provided…
This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…
A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5 inches) American triple hole punch (distance 4 1/4", hole radius 1/4")…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
PRUSA PRO Face shield is the final version of our face shield (successor to the Prusa Face Shield RC3). The main difference from the RC3 version is the larger visor and 2 pins on the side for a better fixation. Face shield is used as…
WORK IN PROGRESS , this is an initial design of the cover. Currently being tested and optimized. Join us, adjust the design and upload your customized cover as a remix. An elastic cover designed to close the gap in the headband, while…
Info: I have taken great original model from @OneIdMONstr (thanks!) and had an idea how to make bigger alien facehugger which is still fully print-in-place bent tail & fingers allow: much longer tail (tail has 41 particles, instead of 11…
There are two versions of the facehugger. One simplistic design that fits more the flexi-family and one more realistic design.
Stacked version of the Prusa Face Shield - US version (RC3 version) A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
The assembler from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The assembler can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included in…
