Counting matching models…
FormFutura's ReFill 2.0 is manufactured for usage with re-usable spool flanges and comes on a cardboard core with velcro strips. This improves the material winding and overall coil strength. Our new flanges are designed with minimum…
Vacuum hose flanges to connect hoses of all common sizes to a flat surface. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 20mm long connector at each end 6 screw holes with 5mm diameter Wall thickness of…
This model is compatible with the lego system.
A 120mm fan duct for 90 degrees mount. I use it for my Alveo3D filtration system, but it should fit to any standard 120mm fan. The pipe has 0.8mm wall, which is not super sturdy, but works well and saves filament. See the dimensions if it…
This model is compatible with the lego system.
PLA and PETG are fine for these, ABS and ASA can be solvent welded to the pvc pipes with appropriate solvent, use flat head fasteners either construction, wood screws or machine screws.
For a project at home I needed a bracket for a water pipe. Instead of spending an hour to go to the shop and buy some, I spent months designing a lot of variations, and eventually learning Autodesk Inventor so that I could use iParts to…
I didn't like how the Falcon 2's exhaust fan mounts to the fabric of the enclosure. I wanted a flange to sandwich the fabric and provide a more sturdy mounting point. 2 types of flanges you can run in various configurations for getting…
I needed a flange for an airbrush spraybooth I was building. I designed a simple 4 inch flange and accompanying backing plate to mount to the vapor chamber. I used M6 bolts and embedded the nuts into the backing plate. This is my first…
Brackets are in pairs, each one a mirror of it's partner so they can be installed with the lock-screw hidden on the backside. Printed in ABS, 3 walls, 15% infill, no support needed. Using mine to mount a short closet rod (4') that will…
I added some screw holes on flanges of the base model to Mihai's awesome model. I used fusion 360 but I hope to someday be proficient enough to redo this in OpenSCAD. Fusion file is included and STL for the bottom, the rest of the parts…
This is a modification of the 60 tooth belt pulley for XL series belts. I needed a version of this, but with flanges. So, I hopped on fusion and made the changes I wanted, and printed it.
Full reduced friction feeding system For extruder number one on the Prusa XL from the left side mounted spool holder using an additional filament guide mounted using the same method as the OEM filament guides. The natural spring tension…
These are magnetic mounts, flanges, and ports for standard flexible ducts. I live in an apartment and wanted a way to pipe my soldering fumes out through the window, but didn't want to leave it up all the time. Each component fits 12x…
For a project at home I needed a bracket for a water pipe. Instead of spending an hour to go to the shop and buy some, I spent months designing a lot of variations, and eventually learning Autodesk Inventor so that I could use iParts to…
This is my version of the Formfutura Refill 2.0 flanges . It features thicker spokes, more holes for filament and thinner spool sides (mainly for TUSH style spool holders). You can either use the velcro straps Refill 2.0 spools come with…
Must be printed with supports - not tested yet on the Robak. Rim's on the photos are printed with Extruder Flex Hard. Remix from robaki - thank you for the very cool rc-car
These can also be used for ducting, cables, conduit, etc. I usually install these with acrylic painters caulk, adding some to the inner circle and around the outer edge for a finished look and air tight seal. Can easily be primed and…
I was Inspired by FormFutura's ReFill 2.0 Flanges , I created a re-usable filament flanges designed for use with Bambu Labs refill filament rolls (1 kg). Rather than a set of flanges/spools for every filament roll, this model allows you…
Depending on printer settings use -0.1 or -0.2 version of X-Lock
Got a cheap and cheerful mini grease gun from Aliexpress, works great except it kept tipping over and I found it hard to squeeze. Made a wider base for it, as well as finger flanges so that you could hold it like a syringe - makes it…
There are a few Lutron Caseta Hub/Bridge mounts you can find, but I wanted one with flange mounting options that keep the screws away from the body of the Hub/Bridge. I drew this from scratch in Fusion 360 (I'm still learning) and then…
Remixed the original and added flanges for mounting, along with vents for cooling and made it longer to help accommodate wiring and Wago connectors. Also made the lid's snaps a little thicker a I've broken a few over time. It's longer and…
I had trouble with the original octagonal screw mounts sliding off of the clip, so I made a version that I could mount to my Voron 2.4 2020 rails with screws and not fall off. There's also a version with just flanges for screws. There are…
There are a bazillion reusable spool designs out there, but I wanted something that is sturdy, does not use a lot of filament and is printable by smaller printers. I designed this spool to avoid printing flanges so it uses cardboard…
This is a remix of the Home Assistant Yellow enclosure with the mounting flanges. You can use some #6 wood screws to mount it to a desk, table, or something flat and easily screwed into. The source is at…
I wanted to make a cyclone dust separator for my shop vac on a bucket I didn't like most of the solutions I found online but after looking at alot of the DIY ones both here and everywhere else I decided to make some simple flanges to…
A couple of 1" PVC pipe (white stuff at least in Canada where I am) flanges I made to build a cat tower using some 1" PVC pipe I had. Works quite well. There are three screw holes of 3/16" diameter each. I printed it in PLA, it worked…
Center flanges for Overture TPU cardboard spools to reduce rolling resistance. I had issues with the friction between the cardboard and the spool holder. This increases the emptier the spool is, as this reduces the mechanical advantage…
When I had a utility sink installed on my back porch, the plumber left unfinished holes where the pipes went through the walls. I couldn't find any reasonably priced cover plates that could be installed without disconnecting the pipes. So…
This is a wall/rack mountable holder for the plastic cases SDHC/MicroSD cards come in. It's designed to be screwed into the wall or onto the face of a 1RU rack panel. You could also foam tape it to whatever you want. It's angled upwards…
My original MasterSpool is a little hard to load at the beginning – the filament can slip off and fall underneath the spool. Inspired by https://fab365.net/items/412 (which does not fit fiberlogy refills ), I replaced the flanges on my…
These flanges are used to convert a standard Harbor Freight 2HP dust collector into a Thein Baffle. The intake converts a 4" PVC to 5" to match the intake port on the unit. The unit has the following characteristics/mods: Blower exhausts…
I needed to mount this to my tech wall, so I added flanges. The screws to close the two halves of the box together are on the wrong side, so I just used electrical tape to close and hold the box together. This box also does not have…
Pipe Flanges (0.5" Copper Supply & 1.5" ABS Drain) and Brackets Snap Fit Pipe Flange that can be installed later and not during plumbing #3dprinting #flange #diy Printed with 0.8mm nozzle and PLA. Yes, if the hot water pipe gets too hot,…
Intro: Get ready for the excitement of the European Flag Flanges with a soccer version too! We've crafted country-coloured flag flanges for our ReFill filament. We only have a limited selection of countries so let us know what country to…
I liked the design of Dronnn's cyclone, but the bottom part was too tall and cumbersome. I thought that just a flat flange would do fine. 2 models included - bottom flange goes on the underside of your container's lid, and the top acts as…
This is a very simple object that will prevent a Mr Stacky vertical garden from sinking into the ground. I followed the instructions on their website and drove a ¾" diameter bit of electrical conduit into the ground about 30" deep. Then…
Models I've used for the kitchen ducting
I bought this component grabber and found it hard to hold when pushing down the plunger. It worked fine when gripping the tool tightly with the whole hand, but it was still slipping and not really user friendly. The hole has a diameter of…
This is quick remix of Thomas H 3D 's Blum hinge damper adapter. It has the default values of that model (5mm screws with a distance of 32mm) as that works perfectly with the IKEA Billy bookcase.
This is just the hub of a spool so you can save filament by reusing the disks or flanges of an old spool. Cut the flanges off the hub of an empty spool. I used an Overture spool made of cardboard. Print both sides of the hub and the…
Created a simple and slim screw and nut centre for the FormFutura refill flanges. Inner diameter is 49mm. Should work with the following FormFutura refill flange models. https://www.printables.com/model/959230-formfutura-refill-20-flanges…
Remix of DJK's case. Added mounting flanges to mount it.
VENTILATION PANEL FLANGES Choose by actual hose dimensions. 125 mm clear bore / 129 mm spigot OD / 153 mm square flange / 138 mm screw pitch; or 150 mm clear bore / 154 mm spigot OD / 178 mm square flange / 163 mm screw pitch. Four 4.6 mm…
This model is compatible with the lego system.
This is quick remix of Thomas H 3D 's Blum hinge damper adapter. It has the default values of that model (5mm screws with a distance of 32mm) as that works perfectly with the IKEA Billy bookcase.
Models I've used for the kitchen ducting
This flange is a simple model with simple print needs. I printed PLA at 30% infill with gyroid pattern and it is plenty strong. The specific hose can be found here: https://www.grizzly.com/products/woodstock-5-x-10-clear-hose/d4208 Update…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This model allows you to upgrade standard rolls of electrical (insulating) tape into easy-to-handle spools. By adding these side flanges, you protect the sticky edges of the tape from…
This is a collection of round flanges and adapters designed to optimize airflow and connect various hoses and pipes in a workshop dust collection system. I will be adding more models to this collection as I design them for my own shop. If…
At work I have a rack full of recorders which take SDHC cards. I needed an SDHC card holder that I could fasten to a 1RU rack panel. Threw this together with a combination of OpenSCAD and Tinkercad smashing. It's angled slightly to keep…
quick fix! bit of play once fitted but i can now use my shower again. I will improve the tolerance in the next version printed using PLA @ 50% infill on AnkerMaker made in Autocad and turned into 3d model
