Counting matching models…
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
If you are stressed, this is what you need ! Well even if you're not, you need it too haha The Fidget Flower ! A really cool Fidgettoy to have in your hands And of course it prints perfectly without supports Try it! IMPORTANT : If you…
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
Print in place flower that blooms. Model size is approx 75mm diameter x 50mm tall, opens up to 130mm diameter. Pictured model printed at 0.15mm layer height with 0.4mm nozzle on Prusa MK3 in PLA plus with standard settings. After…
A nice and quick pot/planter for your lovely plants! they will love it We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing!
I needed a flower pot for my basil, so I made this one. I uploaded the pot with and without holes, depending on whether you need the coaster or not. There are also two versions of this one, with centering and without. Be sure to print the…
UPDATE: For even more flower and planter options see the updated release: https://www.printables.com/model/1100526-springy-flower-collection-update This is a springy flower collection. My wife liked my springy flower I previously posted…
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
1. Set Infill to 0% Go to Print Settings → Infill → Set to 0% This removes the internal fill, but the walls remain thick. 2. Adjust Wall Thickness In the Shell / Perimeters section, modify the wall thickness: Wall Loops / Perimeters – set…
Another non audio related print. This is a flower design I did in Fusion 360 a while back. Prints flat on both SLA and FDM machines. No supports required as well, so comes off your printer nice and clean. The lower the layer heights, the…
Simple vase mode flower vase. Openscad code included. I printed on a MK3S with a .8 Revo nozzle, using PrusaSlicer's .4mm quality preset plus vase mode. Larger nozzle helps to get fatter single-wall widths. Looks good in co-extrusion…
Set of Hexagonum flower pots - 3 sizes S/M/L) with tealight. Pot sizes: small - 59.94mm height medium - 79.98mm height large - 104.84mm height Tealight size is 31.17mm Pots have a closed bottom. No special instructions to print. However…
Print one of each (my settings are below). Then place the spadix inside the flower flat side down and push the bumps through the hole in the bottom of the flower until it stops. Then align the bumps on the spadix with the bumps on the top…
You can find my newest lamp designs for commercial use here. Commercial license for MODERN MACHINE. This is a premium model that has been released for free. ====================== PRINT INSTRUCTIONS 6-12% infill 5 top layers 2-3 outer…
2024-10-10 - Improvements to the web-based worksheet, including an improved measurement map, and Plot.ly graphics to help visualize your results. Check out the wiki on Github ! This companion to the spreadsheet calculator and browser…
🖤 The Honest Shelf - Modern Art Decor // Vol. 09 🤍 Elegant Line Art Blooms for Your Modern Home ✨ Bring a touch of sophisticated, everlasting nature into your space with these sleek, 3D-printed wire flowers. If You are interested of my…
This is the third of three small flower pots I made for my plants. Print it with enough wall lines and top layers to get it waterproof . The pot has an inner diameter of 60mm and has the same depth. Furthermore, I added a solid version to…
Sizes: ø 60 mm x 60 mm (small pipe), ø 60 mm x 90 mm (tall pipe) Used print settings 0.20mm, no supports needed, Prusament PLA Simply Green The bigger version of the pot is in the making - stay tuned.
🌹 Rose Flower Decor – A sleek and timeless rose, perfect for romantic interiors, gifts, or seasonal setups. Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – classic & elegant ✅ Part of my ornamental flower…
The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…
This model is LARGE. I would recommend scaling it down. I have posted 3 different versions of the stem to accommodate for different tolerances at different scales. Use the appropriate version for the scale your using. I hope this makes…
I recommend heat, bending and curving the flower piece a bit for easier fit. My next hair clip. Previous Bee & Honeycomb Slide Hair Clip is here
Advancent error planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
Just another flower pot. Geometry was created using a parametric model in Rhino/Grasshopper. The model is solid and is intended to be printed in vase/spiral mode. Two versions are included: one is completely closed and the other one has a…
My wife bought ceramic ornaments like these for our daughters to paint. Unfortunately, they didn't grip the rim of the pot very well and were very fragile. I decided to see if I could make something better. Be gentle, this is my first…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :) Higher Poly by Noah1794:…
To make this, you'll need to print one stem, one pot, and three petals. The pedals and stem will need support material. Once printed, no glue is necessary. They should be able to easily snap into place securely. The stem may need a bit of…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
🖤 The Honest Shelf // Vol. 10 🤍 Elevate Your Space with Modern Floral Wire Art ✨ A set of three elegant, continuous-line flowers designed to bring a sophisticated, artistic touch to your home. Part of a collection focused on high-impact,…
This floral lampshade is easy to print and assemble. Designed to be compatible with an IKEA Hemma socket, this lampshade makes for a striking overhead light or can be easily set up as a tabletop accent light. Every petal in the lampshade…
This is the second of three small flower pots I made for my plants. Print it with enough wall lines and top layers to get it waterproof . The pot has an inner diameter of 60mm and has the same depth. Furthermore, I added a solid version…
A large flower inspired by the well-known Lego-flowers. You can either print it in original scale so you get a x10 scale flower or scale it down by 50% to get a x5 scale one (that would e.g. match the wooden lego minifigure). It's…
articulated flowerspot 0.20 layer 15% infill no supports
A sitting flower pot in the shape of a skull without jaw. Supports needed only on contact with the bed
This model is a fractal (iterated function system) created to resemble a flower. Through post-processing, I've made it 3D-printable. I used PLA with a .4mm nozzle, a .2mm layer height, and 10% infill. With PLA and adequate cooling, you…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
I saw this model and i liked how it used the spiral/vase mode and i wanted to give it a try so i made this flower. The model meant to be printed in vase / spiral mode! You can enable spiral / vase mode by ticking: Cura slicer: Under…
A three piece sunflower cookie cutter. The three piece design allows you to achieve the desired impression depth in the middle part regardless of the thickness of the dough. Or you can cut out the center part completely and swap it…
🖤 The Honest Shelf - Modern Art Decor Collection // Vol. 19 🤍 Elevate Your Space with Elegant 2D Line Art ✨ A pair of sophisticated, minimalist flowers—a Rose and a Lily—designed to bring a touch of botanical beauty to any setting without…
A fun little flower at a cute size (under 5 cm in diameter) that can be used as a hair accessory by sliding a standard bobby pin into the provided slot. This is a quick and easy print (no supports required), and comes in at under 6 grams…
This is a set of flowers for that special someone on Valentine's Day. It's based on my Springy Flower Collection found here: https://www.printables.com/model/1100526-springy-flower-collection-update Do not scale down or the threads will…
Here is a two part tulip model featuring the stem and the bulb. The stem inserts into the bulb with a tight fit then twist to lock in place. Depending how your print goes, you may need to file or sand the stem a little to make it fit…
Bring a little light to someone's day with this delightful sunflower. It is designed so you can add a single color change so it's easy to do even for printers without multicolor function.
Drain Hole removed, negative volume body improved for easier printing. large overhangs reduced inside the bag. Printed with PETG prusament with 5 % giroid infill and 3 outer walls.
Especially for Valentine's Day, I created a cool version of the rose stem in maximum height (220 cm). The leaves can be shaped using a hot air dryer, as described in the original object…
Flower Crown. Enlarge or shrink as Needed. Made it thick enough to shrink a bit. (flowercrown5 and 6) Still not thick enough Tested with organic supports. Worked well. Added Flowercrown.obj/.3mf and new gcode for a thicker version.…
UPDATE: A crocus flower is available here: https://www.printables.com/model/1739882-crocus-flower-springy-flower-collection UPDATE: A barrel style planter is now available here:…
A very nice and modern indoor or outdoor flower/plant pot - easy to print in 2 or 3 layer vase mode. Your plants will love it! Happy printing! :)
Print solid file in “vase” mode with 6 bottom layers and 4 perimeters, or scale to your desire. Hollow file has 1.5mm walls, that's 4 perimeters on my printer. Note that if you scale this model down the walls will be thinner too, and may…
I have been planning to make this model for a long time, the model complements my existing sunflower fabric coaster ( https://www.printables.com/model/285153-sunflower-fabric-coaster ). The holder should hold 4 to 6 coasters. For better…
A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…
A wearable simple and beautiful tiara. Print instructions Print with support, be careful uppon removal. The tiara was modeled after the "IMPERIALLY UR TIARA" from Bling Jewlery in Fusion 360.
An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D
Best result with 0.8 mm line width and single wall - vase mode
Print with z=0.3 PLA or PETG Put in flowers, pencils, sweets or…., love. W
After printing you should seal the vase from the inside with some epoxy resin or something similar to ensure that it is waterproof so it wont leak. You can improve the printing quality by using 0,2mm or 0,1mm layer height, but it takes…
3 tailles de pots design Diamètres intérieurs/intern diameter: 15.2 cm / 20.3 cm / 25.4 cm
Internal diameter is 3.875" and 3.45" deep Overall pot is 4.25" wide and 4.20" tall Printed in .2 layer height 10% grid infill Print with fuzzy skin on outer walls for awesome textured pot
Print with PLA BasketBall Rim+net use support Use Multimaterial painting and Print it with colors or paint after. 4 mount options: Print all the parts and put it on the desk Print all the parts and glue it to the wall If you like just…
A clean and easy-to-print vase model, perfect for home decor, plants, or display use. The model can be scaled freely to match your needs. No supports or raft are required, making it beginner-friendly and reliable to print. Tested…
Prints as 2 separate pieces that press-fit together. Take note of which base to use. One of them has a slot for a gift card and the other does not. The assembled height is about 10.5cm (4") tall. The base is 4cmx4cm or 1.5"x1.5" The…
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor. Just glue the head with the body and enjoy it!
Butterfly with flower design Suitable as home decoration, wall art or coaster under your cup Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm layer height…
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Flowers with optional blossom basket. No support needed, no multicolor. Designed at 100% to match the existing Giant Lego Wreath, printed at 170% with 0,2mm layer height. Art design by Hannah. Happy printing!
Any feedback would be greatly appreciated. Commercial Use 'til March Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Hummingbird - wall art, easy to print birds collection: https://www.printables.com/@klimoma_1671305/collections/1412225
Printed in PETG in various colors , some parts 0.3mm layer to reduce time ,hands 0.2mm layer, all parts without supports . The link between petals are printed using Tansparent Petg , needed to avoid petal movements The total width of the…
For 2 years, I have had the model "Sunflower Windmill" uploaded. It was showered with likes and won first place in the Floral Design Contest. Back then, I already provided a simple mod for 608 ball bearings for my Patreon members. Now I…
This is the first of three small flower pots I made for my plants. Print it with enough wall lines and top layers to get it waterproof . The pot has an inner diameter of 60mm and has the same depth. Furthermore, I added a solid version to…
Please note that the license for this print is for the layer-change G-code only. The Roses of Unicofil flower used as an example remains “Attribution-NoDerivatives” and is itself unmodified in this print. By dynamically adjusting the…
Wall art vase with flowers
The Vase was printed on a Geeetech A10M with the dual color extruder hence the color gradient. Here is an article if you want to learn more about waterproofing a print. After a bunch of trial and error the following settings worked for me…
The joint is based on a balance between friction and tolerances; although the design also takes this into account, it may be advisable to test the relationship between print speed and extrusion speed. Obviously all the other parameters…
Make your own ribbon-flowers to decorate your Christmas or birthday presents. tools you need: scissors stapler double sided tape or glue (hot glue works best) ribbon width for each size: S: ~5mm M: ~10mm L: ~15mm how to make your…
Imprints clay with a beautiful abstract flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm…
I had the idea to create this model after cleaning out my storage unit and finding some kusudama flowers my wife and I made together. Normally these are made from folding paper, and boy have I made my fair share of them. I thought it…
Printed in Polymaker PolyWood PLA with pastel Polymaker PLA
The petals for this sunflower are printed flat and can be shaped after printing with a little heat. The sunflower is the national flower of Ukraine. https://youtu.be/PvxHaFnjXZA Printing All parts can be printed without supports. Petals…
Wall Art - Flower Rabbit Easter
A blank, matte-white model of a cheerful sunflower, ready for your colors. This DIY collectible captures the bright, simple beauty of nature in a smooth, minimal form—perfect for adding a touch of creativity and warmth to any space.
I maked Vernal Flower Bunny Decoration With Stand for Easter or Simple Home Decoration. PLA 17cm height Happy Printing
This is the fire flower from mario bros universe. I design it in split parts to paint or print each of them with different color. I include some tolerence between parts to be sure they can be insert (I hope it's ok for all printer, I've…
Nice and easy to print cookies cutter for marmalade/nutella cookies. With a 5mm thick dough also petals are impressed.
18,8cm high flower vase. Best printed with 0.6mm nozzle.
Maceta cuadrada para plantas pequeñas, con drenaje de agua incluido. Especificaciones: Las macetas tienen 50mm de altura. El grosor de las paredes de la macetas son 2mm. los agujeros de drenaje de agua son de 4mm de diámetro con el…
A fun desk accessory to keep things in, made with a Gridfinity base Print all items as they are oriented already and you shouldn't need supports. A brim may be required for the stem and leaves.
This is a rounded stem for the Lego flower pot model called “Lego Inspired Flowers” by user 365Prints. I made this because I wanted my flower arrangements to have many flowers. Unfortunately, the original straight stems are not stackable.…
Material: PLA Nozzle temp 215 Bed temp 60 Printing speed 50mm/s Support No Plate adhesion No 15% filling
This is a large flower pot with drainage holes and a saucer. There is also a coaster on which the pot is elevated so that more water can drain from the pot to prevent root rot. The plates are equipped with a catch so that the pot is…
This is a MTG inspired Black Lotus. There are 2 different models. One lotus flower with a bud and one lotus flower without a bud. There are also 2 different stems. One is shorter (this is pictured in the photos) that is around 4 inches…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Update: I resized the item to be near a target of 50 mm for height and decimated the mesh to make it easier on the download. If it works for you, could you increase the stars?
Universal Clamp for Windmill -> New Heavy Duty Clamp On the top Site it has a hole to fit perfectly the rod from Hexagon, Toroidal and easter Egg Windmill. Use the screw clamp to securely attach the wind turbine. For example, to balcony…
