Search results: ghs

Thunder Thighs (Dummy Thicc MK2)

The Batman Who Laughs Bust (pre-supported)

This is one of those busts with arms. I know there's mixed opinions about them, but in the case of TBWL I think they are almost a must. (There is however a version without sockets for the arms). If you want to print the entire thing the…

Pivoting Panel Pass-throughs for 4mm PTFE tube

edit 28-07-26 - added a variant with 4 tight holes. See under Pivots for PTFE tube with tight fitting, "Quad Pivot 4.2mm round.stl" edit 15-10-22 - added two flat variants, as well as a M6 M10 variant This pivoting pass-through allows to…

GHS Hazards Pictograms

GHS Physical/ Health/ Environmental Hazards Pictograms In my profiles (Bambu Studio) there is 1 sign per printing plate, the printing plates are named accordingly. The Signs are already colored and an AMS is neccessary. for more…

Batman who laughs bust

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint As you can see in the images above the model comes with a seperate base and a very small amount…

Dewalt Toughsystem Worktop adapter and surface

Printed adapters for interfacing with the top of Dewalt toughsystem 2.0 boxes. Worksurface was cnc routed from ½" MDF by Sendcutsend.com (approximately $35 each at the time). Used these threaded inserts from the bottom side to attach…

Kylo Ren Lego Lighsaber

Recently I got a Kylo Ren Lego minifigure and I wasn't quite happy with his original lightsaber hilt... so obviously I designed and printed a new one. First I reverse engineered the basic Lego lighsaber hilt piece and then started…

Deutsche Bundesbahn PWGHS 54 Güterzugbegleitwagen Gauge 1 / 1:32

This is my interpretation of a gauge 1 (1:32) Deutsche Bundesbahn PWGHS 54 Güterzugbegleitwagen. Best printed in PETG, with the outside of the walls facing up. 20SEP19: Uploaded improved STL's. Construction: Identical to my previous…

GHS Hazard Symbols

Hi folks, this is a not (yet) complete collection of GHS warnig symbols (see Wiki. link below). These are all hazard symbols, except for the transportion pictograms. Printed in PLA these signs are cheap (<1€), durable, reusable and…

Dewalt TOUGHSYSTEM 2.0, Drawers DWST08330-1

-tisknuto z PLA -Dewalt TOUGHSYSTEM 2.0, DWST08330-1

DB Hochbordwagen - DB Hghside Car for h0 scale

This is a model of a typical european high side car for h0 scale. The model is divided into different parts and can be directly printed in the needed color, so no extra work is needed after the printing process. You can equip the bogies…

BatmanWhoLaughs

Sculpture made from a concept created by me, based on the comic book character, Batman who laughs, is an alternative version of our favorite hero, where he is a villain. a kind of function between the batman and the joke

Compartments for DeWalt Drawer Toolbox ToughSystem 2.0

A very useful additional gadget: https://www.printables.com/pl/model/597928-dewalt-tough-system-20-anti-tip

Batman who laughs (FIGURE)

alternative version of Batman, action figure for printing on filaments, with separate parts, bust version also available

Rias Gremory Highschool DxD Mini Figure

3cm Rias Gremory model from highschool DxD quick 30min print Feel free to upscale for larger model 0.16mm layer height 15%% infill Use supports for hair

Dewalt Toughsystem 2.0 Organizer Bin

This is a replacement bin compatible with Dewalt Toughsystem 2.0. Friend at work broke one so I modelled a version better optimized for printing, however the brim should still probably be supported for best results. The middle step will…

DEWALT ToughSystem 2.0 Stacking Divider Bins (SMALL)

Small divider bins are ideal for adding extra storage space and organization to the Dewalt ToughSystem 2.0 Small Parts Organizers. Chose from single to four compartment tray inserts. Compatible With: Dewalt 2.0 TOUGHSYSTEM Compact Small…

GHS Hazard Pictogram Magnets

GHS Hazard Pictogram Magnets This is a collection of GHS Hazard Pictogram Magnets. They can be used in the kitchen as fridge magnets, in the workshop or as teaching aids on the whiteboard. For more Information I added a link tot he…

DeWalt Toughsystem 2.0 Divider

You can print them laying down or standing up, though laying down are stronger due to layer adhesion. Printed in ASA, 0.3 layer height, 3 perimeters for standing or top/bottom layer for laying down. No need for infill as they will be 100%…

Highschool DxD chess set

I made this for myself some time ago but I figured people would be happy to print them for themselfs as well. Is has holes for magnets in case you want to add them.

DEWALT ToughSystem 2.0 Stacking Divider Bins (LARGE)

Large divider bins are ideal for adding extra storage space and organization to the Dewalt ToughSystem 2.0 Large Parts Organizers. Chose from single to four compartment tray inserts. Additional ½ trays for side by side use. Compatible…

Toughsystem 2.0 Workbench Mount

Add drawers to any workbench or stow away your DeWALT Toughsystem 2.0 boxes with these brackets. You can connect and disconnect your boxes with ease. These are designed to be mounted with 4 #8 screws per bracket. ** Edit - sorry I…

SuperGrip Bowden Tube Clip / Retainer + M10 Threaded Fitting — Universal PTFE Tube Lock for Filament Dryers, Enclosures & Passthroughs

note 11th April - Significant improvemtne to grippiness! I accidentally had an older version of the legs - if you downloaded it, get the new version here. 📌 TL;DR: Your Bowden tube gets slowly pushed into the dryer during printing. This…

Impossible Passthroughs (that actually work!)

I don't know about you, but most of the passthrough models I find to print are not toleranced well. Look no more! These are toleranced to print with no additional settings and work off the print bed!! Please post makes! Suggested layer…

Dewalt Toughsystem 2.0 Clips/Brackets

I wanted to be able to mount a tray, tote or tabletop to my Dewalt Toughsystem 2.0. Something similar to what is available for the 2.0 DXL or TSTAK. Since nothing was readily available, I designed this clip to make my own. I made two…

Socket Organizer for Dewalt Toughsystem trays

Designed to easily fit in the Dewalt Toughsystem 2.0 Shallow Tray . I liked the look of their ready-made organizer (pictured), but I already had my socket set and didn't want to spend another $100. I've added a few extra spots for those…

Double Bladed Lighsaber Connector

Connector between sith lightsaber ( https://www.printables.com/cs/model/3722-collapsing-sith-lightsaber-removable-blade ) and jedi lightsaber ( https://www.printables.com/cs/model/3721-collapsing-lightsaber-removable-blade ). A little…

DeWalt Airtag Toughsystem 2.0

Print with name facing up I used #8 ¾ inch wood screws for mounting

GRAVITRAX Stone with triple crossing and height stone with pass throughs

GRAVITRAX ; Ever wondered why they only do double crosses? You can do triple now too. Is that Column in the way too? Let’s pass through it then. Just print your own! GRAVITRAX Stone with triple crossing and height stone with pass throughs…

Batman who laughs (BUST)

Two bust versions of the alternate version of Batman.

Kawasaki Jet Cones ( race, freestyle, highspeed )

Hi I have created 3 conus for the kawasaki jetski series 650 SX & X2. There are 3 different shapes / lengths. The short cone is for freestyle riding. The middle one is the racing cone and the long one is the maximum speed cone. I worked…

Batman Who Laughs

Batman Who Laughs statue

Poop Emoji Cookie Cutter: Bake Up Some Laughs!

Add a festive twist to your baking and playtime with this Poop Emoji Cookie Cutter! This quirky kitchen tool is perfect for creating cookies that bring joy and laughter to any celebration. Shaped like the iconic poop emoji, it's sure to…

Base para lighstick version Twice

Base par lighstick

Hypermotard 950 motogadget & Highsider Bar End Mirror Adapters

This part is supposed to be put between the bar ends and the handguards so you can mount bar end mirrors to the bike

Dewalt ToughSystem Drawers leg retention

I made myself a sliding shelves, but Dewalt box slides on top of it. That's why I made this leg holder which holds ToughSystem box on it. There are two variants, hidden and with the lip. Lip version helps you to make box flush with the…

Mini Lighsaber single piece

I liked the mini Lightsaber, but I found it to be rather fragile, especially at the joints. I decided to remix it so that I could print the blade all in one piece. I also felt that the 3 parts connected were a little too long. The blade…

Swarm of Sluaghs

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Philips Hue Lighstrip Plus Outdoor Cases & Mounts V1

Hier sind alle benötgten Komponenten um den Philips Hue Lightstrip Plus im geschützten Außenbereich zu betreiben. Ich verwende alles für die Terasse, installiert unter dem Dachüberstand. Also recht gut wettergeschützt. Die Nacharbeiten…

Kywoo Tycoon EVA 3.0 Highspeed Mod

After buying a kywoo tycon on ebay for cheap I decided to get the printer working. I testet the design for now 3 month and had no issues. Main issues I had: Heatbed cable is unsafe Powersupply was not earthed Kywoo Mainboard has loud…

Ubiquiti UBNT ToughSwitch EdgeSwitch 5XP top cover case houseing enclosure

Last week I found my EdgeSwitch (vel ToughSwitch), from UBNT, very sticky. The rubber coating of the casing dissolved after years and turned into sticky pulp. So, I decided to develop new housing, 3D printing friendly one. This is only…

Gridfinity Trays / Troughs for Drills, Mills and other Items

Simple solution to organise many different things. These are very common in shops. And I could not find one that was ticking all my boxes, so I designed this. You can easily set this up so it will fit anything that you want to store,…

Dewalt Toughsystem 2.0 Nesting Boxes

nesting boxes for the dewalt toughsystem 2.0 organisers. These fit the full width and half width organisers and both sizes of box and allow you to store more things in one organiser.

Outdoor Enclosure for Govee Light Controller | TPU Gasket | Dual 6 mm Cable Pass‑Throughs

Give your Govee string‑light controller (e.g., Govee Xmas Lights) a more weather‑resistant home. This printable enclosure uses a compressible TPU gasket and dual cable pass‑throughs to improve outdoor durability over the stock control…

Highscreen retro PC case feet

Added 2x 120mm fans to the bottom of an old Vobis Highscreen PC case. Had to print new 3cm feet to get some air flow going. Used feet for a Lenovo T5 as inspiration and as a base model.

Bladeplug lighstaber diam25.4

blade plug pour lightsaber. diamètre 25.4mm (1po)

Ubiquiti UBNT ToughSwitch EdgeSwitch 5XP low cover case houseing enclosure

Couple months ago I published a project of the top shell of enclosure of EdgeSwitch (vel ToughSwitch), from UBNT: https://www.thingiverse.com/thing:4372312…

Updated joints on shoulders, arms, hands, thighs, legs, ankles for Bender

The joints I designed are in three parts that come together under pressure to form one piece. For each section of the leg and arm you should print the ball, joint, and arm or leg part. So in total you will print 8 of each piece (24 piece…

ThiCk Thighs and SPooky ViBeS

OH yah!! one of my weaknesses! color print and enjoy!

DeWalt Toughsystem 2.0 Wall Stay For Drawer System

Ever had the entire Dewalt Toughsystem 2.0 Drawer stack fall onto you just because you opened your top drawer?? Thought not but this… almost happened to me.. But never again will this nearly happen! My Dewalt wall stay will solve this…

Rounded thighs, D13

There isn't much to go here, everything is generally in the "differences of the remix" 2/2 small publications for Quality of Life changes. Print the parts as you would with a regular D13 Left Thinner thighs | Right are the larger Red is…

Britney Spears in thigh highs

Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.

Boing 737 Knee Lighs Panel Frame

This design was created and adapted to fit my own setup. I’m currently building a 737-800 NG cockpit, and I’ve been gathering references and measurements from multiple sources, while also incorporating some of my own ideas. What I mean by…

GeeeTech HighSpeed PLA Spool Hub

The smaller one in the phot is the "large' from the 3 hub remix for reference.

Gremory Clan Necklace (Highschool DxD)

Gremory Clan Logo Necklace inspired by High School DxD Print Settings Printer: Syskrack i3 (Custom Prusa) Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 Infill: 10 Category: Accessories

XSR 900 Highsider Mono Tail light

Bremslichtlösung für die Yamaha XSR 900 mit Highsider Mono Bremslicht (Ø18 mm): Nach dem 3D-Druck muss lediglich ein M10-Gewinde gebohrt werden. Am besten bohrt man dafür ein 8,5-mm-Loch und schneidet das Gewinde vorsichtig ein, indem man…

DeWalt ToughSystem Tray Bins

I designed these bins to use in my DeWalt ToughSystem trays so I could better organize my parts. The Tray Grid file is optional, but keeps all the bins from moving around when you take one out. You will need two of the Tray Grids to fill…

Philips Hue Lighstrip Bracket flat+45 degree mount

Hello everyone! I created this bracket because I needed something to hold my lightstrip I have around my bed. Though I imagine the bracket could be used for attaching lightstrips to anything you would want. I created one that is flat, and…

Edgerouter X mount for Toughswitch PoE Pro (Edgeswitch)

A mount to hang an Edgerouter X (Non-SFP) on a Toughswitch PoE Pro.

Yamaha XSR900 (2018-2020) Highsider Montana Bar End Mirror Adapter

Simple designed adapter ring that fits perfectly on the original bar ends of a Yamaha XSR900. With this ring the Highsider Montana mirrors can be tightened perfectly. Printing Material: PETG or better due to temperature durability…

Cat ears with lighstrip holder

Cat ears with lighstrip holder

V6 updated short highspeed hotend

https://bit.ly/3DEObvR https://bit.ly/4fKfxxY https://bit.ly/4h519RZ

Batman who laughs and flashpoint batman helemets

lego

Quad-Quad Planetary designed for Vorons and other precise highspeed printers. Print-In-Place from FreeCAD- edit 2 files for small adjustments

I designed this a couple of years ago for my Creality printers and I had printed out many variations using this design in Triple-Quad and Quad-Quad planetaries. After building my AWD Voron Trident this basic pair of FreeCAD files were too…

Garden City Highschool 3D Printed Bridge to Transplant Heart BESTRobotics2023

Contact Name: Robert Smith, [email protected] School: Garden City High School BEST Hub: Kansas BEST How It Works Our bridge to transplant heart works by two screws (in black) being driven either two or one motor (stand-ins marked…

Collection of furniture hole covers - passthroughs with covers size - 3-63mm,

This collection is extension of: Use cli node tool to make custom versions: https://github.com/michalmietlinski/hole-generator Inner diameters: 10, 12, 13, 16, 20, 25, 32, 35, 40, 50, 63 mm Depths: 10, 12, 14, 16, 18, 20, 25, 30, 35, 40…

Warning Sighs

I made sighs Print Settings Printer Brand: FlashForge Printer: Adventurer 5M **Rafts:** No Supports: No **Infill:** 15% Filament: ELEGOO PLA Yellow Category: 3D Printing

Slinghshot Wake Logo 2024

Slinghshot Wake Logo 2024 for Keychain or other stuff. Adjust the dimension and add one or two 3-4mm hole to make a keychain or necklace or wristband.

SNAP-OUT NYC Boroughs

Manhattan & Brooklyn Two of the five Boroughs I hope to make eventually. These are more for looks/collecting than for use of popping out each piece, just use to decorate! See more at: Instagram: @3DBrooklyn Facebook: 3DBrooklyn 3D…

Kingman Academy Mascot (Tigers and Coyotes) Highschool and Middle School

Kingman Academy earrings One of the local high schools requested these. So I thought the mascots might be useful to others. I print all my earrings and keychains with a .2 Nozzle Layered. No AMS/MMU/Ace/CFS/Chroma needed. Just color swap…

Saint Francis Highschool Plaque

I printed it at 20% infill on an Anycubic Vyper at a .15mm layer height and it turned out great! I printed the outside in Polymaker Blue PLA and the insert in Overture Gold PLA. Designed in Fusion 360.

Weighsafe Heavyweight Hitch Bumpers

The Weighsafe heavyweight hitch has rubber bumpers that can degrade upon use. They can be replaced by disassembling the hitch and inserting new bumpers. The lifetime of bumpers can be maintained by not using weight distribution bars on…

DEWALT ToughSystem Worktop Adapter Handle

This is a complete redesign of a DEWALT ToughSystem 2.0 worktop adapter, modeled from the ground up. The worktop size for drawer toolboxes is 538 × 315 mm , for classic toolboxes 538 × 355 mm The adapter is available in multiple variants…

Support Boitier Alimentation Hue Lighstrip Outdoor

pour fixer le boitier D'alimentation sur un tube de diamètre 50 mm

The Kavanaghs - Cake Topper

Just a cake topper that can be used for cakes or cupcakes

GHS05 Korozivní látky a žíravé látky MMU3

Určeno pro MMU3 a zrnitou podložku, rozměr 200x200x3mm. Prusa MK4, MK4S s MMU. Ideálně PETG. Barva základní bílá, červená, černá.

Dewalt Toughsystem 2.0 Handle Spacer

Spacer prevents stack from tilting when rolling stack at an angle during transport. Works well in tandem with anti-tip spacers.

GSX-R Kennzeichenleuchte Heckumbau Highsider/LSL

Gehäuse/Halter für LED-Kennzeichenleuchte (Shin-Yo Micro) passen für Kennzeichenhalter von Highsider/LSL. Andere Motorradmarken wären auch möglich.

DeWALT ToughSystem wire spool holder

Wire spool holder (up to 100 mm in diameter) for DeWALT ToughSystem storage boxes. Fits in 12 mm outer-diameter aluminum tube.

Round Junction Box Cover Plate with Cable Pass-Throughs

Round Junction Box Cover Plate with Cable Pass-Throughs A round cover plate for recessed electrical junction boxes with openings for bringing selected cables out of the box. Need a custom part for your setup? I design print-ready models…

Future Stencil - For Highschoolers, Students, etc.

it contains 3 sizes of Circiles, 15, 25, 35mm (diameter) 2 sizes of hexagons a prabola a 60 degree triangle a heart

WeighSafe Sway Perch Jackets

Perch jackets for the WeighSafe WDH hitch perches. Similar to what is offered for the Equilizer E4 WDH. I printed these in nylon with 100% infil. Be advised that this will reduce the amount of sway control you will get with your hitch.…

Thunder Thighs (Dummy Thicc MK2)

Since “that one cat” removed the Dummy Thick leg set from the site, I've used the backup of the files I have to recreate them, smoother, with better finish, and fit for the new 1.0 update. Since A LOT of people asked me for the old files,…

Slinghshot Wake Logo 2024

Slinghshot Wake Logo 2024 for Keychain or other stuff. Adjust the dimension and add one or two 3-4mm hole to make a keychain or necklace or wristband.

Dewalt ToughSystem Drawers leg retention

I made myself a sliding shelves, but Dewalt box slides on top of it. That's why I made this leg holder which holds ToughSystem box on it. There are two variants, hidden and with the lip. Lip version helps you to make box flush with the…

Quad-Quad Planetary designed for Vorons and other precise highspeed printers. Print-In-Place from FreeCAD- edit 2 files for small adjustments

I designed this a couple of years ago for my Creality printers and I had printed out many variations using this design in Triple-Quad and Quad-Quad planetaries. After building my AWD Voron Trident this basic pair of FreeCAD files were too…

DeWalt Toughsystem 2.0 Divider

You can print them laying down or standing up, though laying down are stronger due to layer adhesion. Printed in ASA, 0.3 layer height, 3 perimeters for standing or top/bottom layer for laying down. No need for infill as they will be 100%…

Dewalt Toughsystem 2.0 Nesting Boxes

nesting boxes for the dewalt toughsystem 2.0 organisers. These fit the full width and half width organisers and both sizes of box and allow you to store more things in one organiser.

Custom Lighsaber hilt

Custom Lightsaber hilt

Boing 737 Knee Lighs Panel Frame

This design was created and adapted to fit my own setup. I’m currently building a 737-800 NG cockpit, and I’ve been gathering references and measurements from multiple sources, while also incorporating some of my own ideas. What I mean by…

3 custom templar knighs

much needed supports help from my friend Rollins buck

Custom Lighstaber

had a custom saber machined and this is the reverse engineered model i made.

GRAVITRAX Stone with triple small corners and height stone with pass throughs

GRAVITRAX ; Ever wondered why they only do small and medium corners combined? You can do triple small corners now too. Is that Column in the way too? Let’s pass through it then. Just print your own! GRAVITRAX Stone with triple small…

Ubiquiti TS-8 Toughswitch Wall Mount

Sized for PLA

VGHS "It's all about the game" Desk Plaque

The plaque from Calhoun's desk in VGHS. Print the full sized body model and two full sized poles. Can be printed without supports, but I would recommend including them. This now includes a V2 version with more secure and stable legs, and…

dfghsfhfg h

fghdfgh

Schlumpf-Drive shift-button replacement and repair kit (Speed-Drive, HighSpeed-Drive, Mountain-Drive)

Repair or replace your lost or broken Schlumpf-Drive shifter buttons. This button works on Schlumpf Speed-Drive, HighSpeed-Drive, and Mountain-Drive geared bottom-bracket cranksets made by Haberstock Mobility. The set-screw may not be…

Minimalist Lighstaber Blade Stand

This support is proper sized to support a Galaxy's Edge blade from a table or shelf top. Print as many as you see fit, but one seems to hold it well enough.

Batman who laughs

single and multimaterial

3D Print Files - Wearable Cuisses & Poleyns (16th Century Knight Armor for Thighs and Knees)

This 3D printing file kit accurately matches 16th century thigh and knee armor from museums. It is fully articulated to allow for a total range of motion, including bending the knees and running. It's also very comfortable to wear! =>…