Counting matching models…
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Look at the pictures to see how to assemble it. Updated 2024-01-23: Made the rim/spring stronger. OK now, but still holds not perfect together. Consider to glue it ;) Chamfer instead of a fillet (suggested from @LibertyBeta_67371 )…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
Easily clip/unclip your Glubot glue bottle to a tool wall. Attaches with 2 #6 screws. Printed with PLA and 6 parameter layers. Infill shouldn't matter since there will be none. Did use “organic” supports on 40 degrees overhang, but is…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
General A nice two-color pendant version of the famous Buster Sword. Based on an original model by Jesse Baumes , released under CC BY-NC 4.0. Credit him if you create a derivative work from this one. I've made several modifications…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
It should be printed with 0.25 mm nozzle. Change the filament in the correct layer to achieve the multi-color effect.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
designed to use M3 20-22mm screws and heat inserts.
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
Borrowed the foot mount from gitago (for the smaller version). I widened the foot dock for the larger Gorilla glue gun model, added a 7x angled glue stick holder, and adapted it for Multiboard. This is a small, condensed multiboard wall…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for PETGSource material: PET
parts for the mmu enclousure printed in one piece gcode with input shaper and prusament petg
Print approx. €7.10–€8.67 excl. taxPreliminary estimate for PETGSource material: PET
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Infinite Cube, now optimized for faster printing and minimal material usage! This version is divided into three parts, eliminating the…
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
2023.Jul.7 Strengthening of foot section, correction of overhangs, etc. ーーーーーーーーーー Hot glue guns are really unstable things. They can unintentionally stain your desk, so I made a stand to support them securely. In order to strengthen the…
****Find all of my exclusive content on my Thangs.com profile **** This chunky Stormtrooper kit is roughly 6.5 inches (17cm) tall once assembled. Shop the filament we used in this model on our Amazon Storefront As with all of our models,…
jig for gluing the tiny magnets to gridfinity organizers, so that you can easily get the magnets in the right place with the right orientation, without getting superglue on your fingers. For the stationary magnets, I used some 8mm magnets…
Introduction This is a no-glue-required build. The parts are threaded to make for easy assembly. Perfect as a gift or to make a fine addition to your collection. Parts list 1x Pommel 1x Hexacore Diatium Power Cells 3x Palladium Vortex…
now you can print with support or just use the 2 parts with no support for the two part you need glue. printed in abs if you want the part to be stronger print the parts like in the picture.
Simple hot glue gun stand. It is for smaller guns, Fusion360 file included if you will want to edit it to fit your tools. There is small reservoir for leaking glue as well. 26.02.2019 Added extended version(bigger retention reservoir).…
Looking for a viking axe, but not wanting to deal with glue or non-printed metal screws? Search no further :) All elements printed with 20% infill and no supports except for the axe head which was printed top facing down with supports…
This cable mount can be screwed or glued in place and is available for 3mm - 9mm thick cables.
Happy printing, and if you like my models you can follow me for more awesomeness! I designed this sea-mine last month as a challenge for our pet crayfish Crusty. He was always climbing everything (air pipes, thermometer, plants) and is…
★·.··.·★ 👋 Hello😁 ★·.··.·★ Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better 💚MAKERWORLD→ COLLECTIONS 🌹ROSE - no glue🌹 Easy…
My tribute to all creators of these vast Minecraft worlds… and their (our) children. ;) Designed from scratch in Fusion 360. NO glue or supports needed! Print instructions Print all letters (0.1 or 0.15mm layers) once, 9 pegs (pins), and…
A tiny mixing tray for glue, epoxy, resin, or whatever sticky stuff you’re working with today. It has a little holding tab so you can hold it in your hand, or pinch / clamp it to the edge of a table to keep it from sliding around. Great…
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
The source marked this model as adult content.
Keep your favorite glue stick and a backup close at hand with this dual glue stick holder for the honeycomb storage wall system. Fits into two empty inserts for the HSW system as well. Fits the 21/22g glue sticks or anything under 27mm…
A simple tool for easier gluing, especially with epoxy glue and for larger surfaces. Available in two versions in two lengths, 80 and 130 mm. Print instructions: Printing the model does not require any special settings. I usually print…
Parametric glue spreader. No need to go to the shop. The print files all have teeth glue lines 1,5 - 2,5 - 3,5 mm. The shape of the glue line is triangular. The FreeCad file is included so you can modify this trowel exactly to your needs.…
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
I needed a hot glue gun holder for the honeycomb storage wall that I printed.
Now your Dummy 13 can have a semi-functioning pistol instead of a boring old static model! Inspired by the moving pump shotgun concept of my previous model , I made a pistol for D13, but with a functioning slide that moves back and forth!…
Holder to fix velcro stripe or zip tie by screw or glue. usable for: velcro stripe / zip tie / cable tie width: 10 / 20 mm support: not needed (printed on side -> see picture) material: not defined (PETG/PLA used by me)…
A compact, stackable disposable mixing pad with a small integrated spatula, designed for mixing epoxy, resin, glue, and other adhesives. Quick to print and using only a few grams of filament, this model is perfect for fast workshop use…
Mini Hot Glue Gun Stand & Crafter Station This is the ultimate Quality-of-Life upgrade for any crafter or DIY enthusiast who uses a mini hot glue gun. Say goodbye to messy workspaces and dangerous tip burns! 🔑 Key Features: Integrated…
This is a remix of the '7 inch LCD Case' by arrowmeiwaracing, which can be found here. I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint server, I came across the original by…
****Find all of my exclusive content on my Thangs.com profile **** Channel your inner vigilante with our 1989 Batmobile kit! The kit is roughly 9 inches (23cm) long and 4 inches (10 cm) wide. Shop the filament we used in this model on our…
this is a glue stick holder for the Creality k1 their is a holder for a Elmers glue stick with a diameter of 20mm and a holder for a bambulab glue stick with a diameter of 25.4mm. supports are needed other holders will be add soon for AiM…
****Find all of my exclusive content on my Thangs.com profile **** Build one of the most iconic vehicles in space exploration with this Lunar Lander kit! The kit is roughly 9 inches (23 cm) tall. Grab the Astronaut model featured in the…
Basic 1x1 ½ height Gridfinity holder for Bambu Lab Glue Stick. Gridfinity holder for Bambu Lab 3D Printing Adhesive can be found here . Gridfinity System This block is designed to fit into a Gridfinity base. Gridfinity is a modular…
Note my print settings are recommended, I needed to do a little filing on the tang, but it fit perfectly besides.
Loved the idea of the Infinity Cube Light by James , didn't love the idea of having to glue it all together. So I modeled a snap-together tab system keeping the original's dimensions, both inside and out. All parts snap together. No glue…
This is a stackable glueless rack system for storing your filament spools and boxes. The assembly of the rack is pretty self-explanatory through the pictures. You connect a male part to a female part, do this two times to assemble a…
Needs minimal support just for the rear mount. 2/6/2024: Fixed the 32mm diameter container(s) base so that the bottom is flat. 2/10/2023: I made the walls thicker to 2mm so that it isn't as frail as my previous model. Added a dual-stack…
You should check out my print in place version: https://www.printables.com/model/1215608-print-in-place-gravity-knife-v1 Due to its popularity on printables(There is already several remixes). I feel I should Reopload my gravity knife from…
This is a replacement nozzle and replacement nozzle cap for Super Glue/CA Adhesive bottles. It's possible multiple brands use this type, but this one was specifically modeled after the Rockler/Stick Fast brand, for the 4.5 Oz bottles. In…
Printed with PLA. 0.2 layers. 3-4 walls. 30-99% infill. No supports. Top/Bottom pattern: Concentric Prints in 10-15 minutes.
This is a Gridfinity compatible holder for a bottle of Gorilla Glue superglue. Its Gridfinity size is ½ height by 1x1. Original Gridfinity design by Zack Freedman (video describing the Gridfinity system linked earlier). No supports…
A PLA mold works well, but will need to be replaced more often, I recommend using a material with the highest melting point. Before pouring the glue, grease the mold halves with Vaseline or silicone grease so that they come off more…
Ditch the overflowing jewelry boxes and tangled rings! This stunning 3D printed jewelry tree offers a stylish and functional way to organize your collection. Crafted using eco-friendly 3D printing technology, the design features a…
A small stand made for catching drippings of hot glue from a glue gun. This model was designed specifically around a dual temp mini gorilla glue glue gun, but it should work with other small glue guns.
Introduction You have a little bit of filament left so these Ribbed Sticks can be used for fixing and glueing your other projects. To prevent wasting all the small bits and pieces. The ridges make sure your glue gun can grip the stick.…
I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought…
More than a year ago I printed a tf2 sentry (the red one in the pictures) and while it is really cool, having to glue everything was pretty tedious. Over time it also has completely fallen apart. After a lot of procrastination I've…
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
****Find all of my exclusive content on my Thangs.com profile **** I find your lack of chunk disturbing... This chunky holiday Darth Vader kit is roughly 8.5 inches (22cm) tall once assembled. Shop the filament we used in this model on…
This will hold anything with a diameter ≤ 27 mm and height ≥ 36 mm in a 1x1 gridfinity square. For example, an Elmer's washable school glue stick fits really nicely! This was inspired by the other model but: taller to handle the stick…
This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…
Print color poker chips with non-multicolor printer. You don't need glue to put pieces together. Dimensions: 40mm x 4mm UPDATE! (2026-07-02) New designs available now. Choose your favourite - Club, Diamonds, Heart or Spade! UPDATE!…
This is my version of the hot glue gun stand. It was designed for the Arrow mini hot melt glue gun but might work for others as-well. Inner oval diameter 31mm x 45mm, inner height 80mm Printing fine with ABS, no raft, no support required.…
Majestätischer, sitzender Drache mit breiten Flügeln, kräftigem Körperbau und markantem Kopfdesign. Diese Pose sorgt für eine stabile Standfläche und ermöglicht den Druck ohne Stützstrukturen. Das Modell wurde so gestaltet, dass es sich…
Introducing our 3D-printed Hot Glue Hun Stand , designed to accommodate both small and large guns alike. Featuring a honeycomb-inspired design for a touch of elegance, this stand includes a glue drip tray for mess-free crafting.…
Fun little throwing knife. Works great with 50% infill to give it some weight. Printed at .1mm to keep the detail, but works great at .2mm. Used a few drops of CA to glue together.
Remix of https://www.printables.com/model/42109-bike-wheel-truing-tool Redesigned wheel truing tool for bike with w dovetail between two main parts to eliminate a need for gluing parts together. Can be used to trim the front or rear…
****Find all of my exclusive content on my Thangs.com profile **** It's the holiday season! The nutcracker is roughly 15 inches (38 cm) tall. Shop the filament we used in this model on our Amazon Storefront As with all of our models, this…
no special print features I just printed it on 0.3 and draft. ONLEY WORKS ON ELMERS 7g GLUE STICKS, look at 2nd image for more info.
I've printed a couple off and made a few adjustments.. Gluing RC Buggy tires can be a bit messy at times. Especially if you're a newbie like me ha! I saw a few "Tire Gluing Jigs" from various RC companies that help to press the tire down…
A disposable mixing pad with a small spatula designed for mixing epoxy glue, resin, or other adhesives. Quick to print and using only a few grams of filament, it’s perfect for fast workshop use without cleanup. Ideal for printing from…
The Hotrod Racer Balloon Car by Polly-Jeanius is very cool, but it requires you to use glue, and I'm not particularly eager to use glue. Therefore, I have remixed the model using slightly modified axles from my building kit to allow me to…
IMPORTANT, the base plate is over the Gridfinity dimensions and will over hang on one side. These holders are intended to be on the edge of the grid. I wanted a Tamiya bottle holder for my model desk that fit the Gridfinity system. I…
These prints are glue nozzles for the Festool Domino sizes 5, 6, 8, and 10mm. Also included are a flushing adapter to clean the nozzles and a storage tray. The glue nozzle threads are sized to fit a Titebond 16 oz. glue bottle. The…
A small and minimalistic glue stick holder for IKEA SKADIS/SKÅDIS.
Jednoduchá lavička do parku. Skládá se jen ze unikátních 2 dílů, (ale ke složení je samozřejmě vytiskněte 2x bok 2x sedaci část). Pro tisk na FDM, doporučuji zrcadlit boční část, kvůli struktuře postele. Ke složení není zapotřebí lepidlo.…
****Find all of my exclusive content on my Thangs.com profile **** This fully 3D-printed Sting prop kit is 22 inches (56cm) long once assembled. Display this sword with our veritcal Sword Wall Mount! (Use narrow base/short arms) Shop the…
Here's a new glue-free version of my Qui-Gon lightsaber. The modular parts can be swapped out if broken or simply to change the colors. It's an easy assembly and much better than using messy glue. Model notes Shroud: Requires supports but…
Gridfinity holder for Gorilla super glue. Prints without supports. Thanks to KptnAutismus for the Fusion 360 Gridfinity Template .
This cat fishing rod toy features a functional ratcheting reel with a printed spring to prevent unwanted line release. It makes a satisfying clicking sound as line is reeled in. It was remixed from the original to eliminate the need for…
Holder for hot glue sticks to use with IKEA Skadis pegboard. Holds about 30-35 11mm sticks. I use 150mm/6" sticks at the moment, but it will also fit 100mm/4" and should just about fit 200mm/8" sticks by moving one peg in or out. Printed…
Keep glue stick handy with this simple mount. prints without supports left and right options available. Version for larger 30mm diameter glue sticks also available. Requires two m3 x 8 mm m3 x 10mm allen bolts. Make the thread is no…
A Holding station For CA glue, specifically the Bob Smith Industries type 1. oz and Tamiya glue, square bottles. Also holds the Bob Smith industries accelerator bottle. Print instructions Was printed in PLA with excellent results.
Wanted to print Mjolnir for my friends newborn but the hole closed only by the glued hilt did not feel safe. So I closed the hole - you have to add some marbles or other rattling items during print and they are safely enclosed by top…
I took the stream breaker and added a cylinder to the top so it can be held down by the lid. I also added some fillets around the legs for strength. I'm not actually sure how people have been attaching the original stream breaker, but…
A whole airbrush/spray paint booth for $3?! Yep! (well, mostly 😉) (somewhat of a WIP, will update with more images once my own build is complete!) I wanted a spray booth for working on tabletop gaming miniatures, but didn't want to spend…
Remix from Kyle B Johnsons Gridfinity glue stick, this one holds the new Liquid Glue from Bambu Lab.
The ergonomic thumb recess provides much better control , helps keep your fingers away from the nasty, sticky stuff in the tray. Has a left (LH) and right-hand (RH) version, A right-handed person will normally use the RH tray in horizonal…
Machine that glues tires for RC Buggy 1/8. You need two M3 screws and two nuts for assembly. I recommend 4 walls when printing for greater strength. No need for support.
Finally. A fun way to use your 3D LAC glue for printing plates. New, more detailed version of the Spray Gun with attachment for spray cans such as spray glue, 3D lacquer, colored paint, spray grease or other. Pulling the trigger activates…
Perfectly holds your Loctite Superglue (or other things). Available in 2, 4, and 6 pack. Printed with: PLA+ 35% Infill No Supports Cheers, big ears!
This is very very tight, need to hammer in. And it have rib design to catch and stay in place with the OG top lid. Might need support for the one with hole. If need to print things like ABS, just masking tape around to tape over the…
I didnt make the double post. if someone need it just comment here and ill make it.
We designed this print with screw holes for the hooks, such that the mounting screws hold the mount together. This means that the design does not need to be glued together. If you would like to buy the Sonos One Wall Mount , you can check…
Check the Screwiverse Remixes for other attachments designed for these threaded inserts. These don't fit when the original HSW base/hollow inserts were printed highly overextruded. This is actually something I'd like them to do (that's…
Follow describition in the link. https://www.thingiverse.com/thing:2306188 I hope you like the Import and give me a like/make/share. License CC BY-SA T. Rex Easy Print and Glue by QuickbeamX is licensed under the Creative Commons -…
This is a glue stick holder for RostaP's Honeycomb Storage System . Holds four glue sticks, or anything else of 20mm diameter. Slots into a single hollow insert. EDIT 4/19/23: I made the model parametric in Onshape, such that you can…
💫 Introducing the ultimate laptop stand 💫 After printing other stands on here i found that they were too flimsey or not big enough for my laptop. I decided to make this one to fix that issue and to hopefully help you too! I have split it…
Introducing PrintStick - A revolutionary new glue gun upgrade! PrintStick is a great new addition to any arts & crafts project, as it turns any ordinary hot glue gun into a WORKING 3d pen! The best part is, PrintStick is a print-and-play…
Filling lot's of mortises with wood glue before a glue-up is slow and tedious. These caps screw on to most PET bottles and make glue filling mortises for Festool Domino's a lot easier and faster. I use it only with white or yellow PVA…
This holder was designed for 40 gram Elmer's glue sticks. The interior diameter is 31mm so it should work with many other large glue sticks or markers. There are two versions of the model: One is press fit to use with Multiboard snap…
It's finally ready! This eye-catching design is a must-have addition to your engine collection. About the original engine: What we have here is a “lost” jet engine design the Propfan, that was intended as a fuel-saving alternative…
I use super glue all over my shop and the tips get clogged and I have to either unclog them or cut the tips lower and get a bigger hole. This was such a pain that I decided to sit down and 3D model a replacement tip and cap. The example…
![Final Fantasy VII - Buster Sword pendant [2-color, gluing required]](https://media.printables.com/media/prints/9c57b357-c8fe-4be9-bb81-2f36aaaaaf81/images/10264395_ca46bf2c-ce37-4513-98b8-47618cb74c0f_18b94911-5949-4bb3-8488-32dc55a6317d/dsc02367.jpg)
![Super Glue/CA Adhesive Bottle Nozzle & Cap [Stick Fast/Rockler Brand]](https://media.printables.com/media/prints/78959/images/849535_1c4e08d2-5b99-4e11-9370-f4b47782731b/untitled.png)
![Glue free Creality K1 Top Spacer / Raiser - Honeycomb vent [18June2023 Updated]](https://media.printables.com/media/prints/498294/images/4054428_6e5a5d2b-6758-4f12-a14f-88fcbd5b6b6b/pxl_20230604_135435086.jpg)
