88 models
A plant pot inspired by the structure of a shattering mirror. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this…
This was printed in .04mm PLA .20mm layers 15% infill but also adjusted the horizontal shells bottom to be 5 printed with brim to prevent warping. large sleeves used:…
I made this box to carry the cards for a single Shatterpoint Strike team. The box can fit the following cards (all with card sleeves): 6x Unit Stat Cards; 6x Unit Order Cards; 1x Shatterpoint Card; 6x Stance Cards. The box and lid have…
A low poly vase / pot for plants or flowers Prints very nice in vase mode Happy printing! :D
Mad Hatter, a character from Lewis Carroll's Alice's Adventures in Wonderland. In the story, Hatter explains to Alice that he and the March Hare are always having tea because when he tried to sing for the foul-tempered Queen of Hearts,…
Des emplacements pour des aimants sont préfaits Pour placer le couvercle sur le dessus et en dessous pendant usage.
Do you keep forgetting where you've placed things? Is this driving you mad as a hatter? Try this magical cabinet solution today - or your insanity back guarantee! This design is generated from an array of squares whose vertices are…
Alice and the Mad Hatter having tea Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
A Simple low poly planter for your plants. Happy printing!
I added a base to tie the my previously uploaded Mad Hatter model together, and for added stability since the Hatter is a little top heavy. Full model and instructions are included with my uploaded Mad Hatter design. The base is flat…
Prints really nice. My tip is to use hot melt glue set on High Temp to glue these in. With PLA the heat from the glue softens the PLA on the gums to give a great fitment for the teeth. I think the bridging could use some support so I…
Features a fully 3D printed construction, easy threaded assembly and a fidget gear mechanism. Print Settings (For Strength and Quality) Nozzle : .4mm Layer Height : .12mm Walls : 6 Infill : 30% Gyroid Ironing : On *These settings are…
Tree supports recommended. Scalable. Added floors for minis to stand. Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is the result of multiple years to get a stable design which can withstand abuse. Drum is intended to be printed as a single piece and requires a large format printer. There are other designs which allow for smaller format printing.…
Simple Shatterpoint bases for your custom figure prints. Blank bases and bases with a simple geometric pattern. I printed them upside down on my Prusa MK2.
Simple models of the Star Wars Shatterpoint game range tools. Range 1 is width of any tool, Range 2, 3, 4, 5 tools. You can print them without supports. Not as fancy as the AMG ones, but they get the job done. Several different versions,…
A token tray designed to fit all of the tokens in the Star Wars Shatterpoint core box from Atomic Mass Games. Includes .STL file format for 3d Printing on an FDM or Resin printer. Please do not redistribute or resell. Intended for…
Simple two part Star Wars Shatterpoint Dash and Advance move tools. Suitable for casual play or as backups for your original move measuring tools. I printed without supports, then pressed together. Your printer needs to have pretty good…
A set of ruin-themed bases for wargaming, sized to 28.5 and 32mm
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just a re-upload of someone else's Shatterpoint dice design, but with working resin supports. Print in a robust resin, clean and cure normally. Paint in markings, clear coat with a few coats of gloss varnish.
Perfectly sized piece of terrain based on a popular tabletop game with the words “point” and “shatter” in its name. All pieces should print with no supports needed.
The Shattered Glass Ultra Magnus figure includes parts from the Legacy G2 Laser Optimus Prime, including a red Matrix. However, there isn't a good place to store that piece in robot or vehicle mode. This adapter piece allows the Matrix to…
I've included 3 variants of the lugs for different design aesthetics. Designed to be printed without supports, you may get some droop on overhangs. Should have minimal part cooling to allow for better strength. I recommend printing one at…
Dashboard para personajes/unidades del juego StarWars Shatterpoint.
UPDATE 10/15/23: Hey all, I've gotten some awesome feedback on these, So I've made some major changes and fixes. The new changes are different enough, and benefit travel more than regular storage, so I've decided to break the project into…
The Mad Hatter From Disney's 1951 animated move Alice in Wonderland This design has a lot of colors, and mine may not be right on mark with the original animation because of the several different greens (his jacket is an odd green I don't…
These hoops are not intended for live playing/gigging, they will slowly deform over time due to the high tension of snare drums. They are very useful when evaluating different drums. The hoops behave similarly to wooden hoops and can…
This is designed to take advantage of the built-in sound sensor of the micro:bit to create a lip-synching effect. The original idea was from this inventables: https://www.instructables.com/Lip-Syncing-Characters-With-Microbit/
This is a miniature version of the Chattermax toy from the Bluey television series. The dimensions are 2 ¾" tall and 2 ¼" wide.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Broom Hatters, Tabletop DnD miniature 25 mm model with and without medium base which can be used for…
Inspired by a shattered light bulb, this design can be used to fit over an existing light fixture - in my case I wanted to save an old Ikea lamp that worked perfectly well, but the lampshade was old and ugly. Often old products like this…
A witch holding fragments of a broken mirror in her hands, cloak flowing into a round base. One-piece statue. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Was given the idea to make a Struggle Tracker that actually has Who won each Struggle on it.
Frame for the acrylic “enclosure” included with the Circuitmess Chatter 2 (a Lora text messaging device compatible with Meshtastic firmware.) Features a nice satisfying power switch slider, and reinforcement for the flimsy top section of…
Printed in PLA. Human version printed in black, except for the band printed in red. Custom colors printed for the makers and others madder than a hatter. Mount to the badge with 3x M2 4MM screws and a plastic washer with each. Tighten…
I prefer to have my magnets centered and these will help. I have made one for 5mm by 2mm ish magnets. Let me know if youd like different size magnet insert.
This is for stiffening the X-Axis of your X-Carve (2015-to early 2017 models). Print instructions Category: Machine Tools Summary This is for stiffening the X-Axis of your X-Carve (2015-to early 2017 models). Per pair, you need: m3 x…
This is just jimjimjimmyjim's mask but with the straps and buckles removed. Category: 3D Printing
This is the Epic weapon, Shattergun, from the game The Cycle: Frontier. The Cycle: Frontier is a PvPvE first person shooter made by Yager Development. They had unfortunately announced that they will be shutting down the game as of…
The Mad Hatter (White Rook) | "Through the Looking-Glass" Chess “It’s always tea-time, and we’ve no time to wash the things between whiles.” The corners of the chessboard have just descended into absolute madness! You cannot have a proper…
Two gears for use in the ChatterBox Teeth, a collaborative project with Renosis. Print instructions Unassociated tags: gear script Category: Engineering Instructions Print http://www.thingiverse.com/thing:8138
Printed in black PLA to help blend in with the badge. Custom colored hats were printed for the makers and others madder than a hatter. This adapter allows quick swapping of hats. Badge adapter mounts to the badge with 3x M2 6MM screws and…
This is for stiffening the Y-Axis of your X-Carve. Per stiffener, you need: 2x m5 x 8 mm button hex screw ( https://s.click.aliexpress.com/e/\_d8YF8cV ) 2x m5 t-nut ( https://s.click.aliexpress.com/e/\_dSRSU1X ) OR drop-in t-nut (…
Step into Wonderland with this enchanting Mad Hatter 3D printable figurine that captures every whimsical detail of the iconic character! This stunning STL model showcases the Hatter's elaborate top hat, flowing coat, and distinctive pose,…
This star wars keychain is perfect for those who sympathies with the rebellion but are not afraid to dabble with the dark side. 35mm diameter. Can be scaled down to 30mm and will still fit the chain. Printed on a Bambu Lab X1C using esun…
The holders have a .4mm tolerance to the bases. For my printers they are a snap fit. Your mileage may vary. I designed them to be wide enough to allow multiple points of contact, but also if you want to remove the magnets you can. Holders…
Shattered Glass Optimus Prime is here and now you can print him! $0!
When love is so intense it cracks both heart and stone! Introducing the deeply moving Shattered Lovers Sculpture – an artistic masterpiece capturing passion, vulnerability, and the fragile nature of human connection. The cracked and…
This TPU rim protector can just be pressed onto the Shattered Cycle Drums Geo Hoop design. It was designed with a 0.8mm nozzle in mind , but I also included .f3d and .step files so you can change it to your liking. Print in TPU! Print…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0 PLA Sunlu Gray Transmission Distance: 2.2 PLA American Filament Classic White Transmission Distance:…
A chess king that shatters when you pull out the sword when you get checkmated
Token Tray for Shatterpoint Tokens, based off the Kill Team Tray. Standalone or for use with BattleStack box: https://www.printables.com/model/1332602-battlestack
Remixed a Gloomhaven altar to fit with shatterpoint; scaled up to make it so top of altar is a differen elevation
es un modelo de el exppectacular pokemo Hatterene
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A whimsical chibi-style 3D model inspired by the Mad…
I made the season of shattering season emblem, I made versions with a hole and with a loop. I did fill the entire background this time since I thought it looked better than smaller connections between the pieces like the other emblems.…
100x160mm sign, featuring “Marvin the Martian” from WB cartoons and the text “Earth Shattering Ka-boom!” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox…
A pottery stamp based on the Mad Hatter from Alice In Wonderland. In the photos you can see an actual impression made by the stamp, printed at 100% scale. If you like this design, stay tuned because I'll be re-mixing all my stamp models…
This dramatic shattered stone banner captures the aftermath of conflict. The sculpt features a cracked and fragmented flag carved from stone, mounted on a weathered pole and set into a fractured ground base. The flowing shape of the…
The original lug gasket was missing from the upload, so I modelled my own. There are 2 variants available: One with a small border like in the original image and one that is flush with the lug. Note: .STEP and .F3D files are also…
Reimagines the concept of a vase, transforming the typical vessel for flowers into a sculptural statement piece. Its clean, minimalist form is intentionally disrupted by a network of cracks, reminiscent of a shattered surface. However,…
If you're going to do stop motion animation, you can use this for died Dummy 13. Or it could happen when a sword is thrust into their head, or when they are shot.
It's a simple build. I'm an up-and-coming creator so these are my first drafts. Fully operational. I plan to add the wired connection opening to this model. So if you enjoy it, be sure to look out for that. It's quite an intense print so…
I've been really into painting my Star Wars Shatterpoint collection lately, and I wanted to add some ¼" x 1/16" magnets I've had lying around to the bottom of all the base of my minis (partly to help keep stuff in place while painting /…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A charming chibi-style 3D model inspired by the Mad…
A resonance tracker for the character Shattersong in the board game Frosthaven. It uses the tokens that come with the game. Useful if you are using a player dashboard and can't use the tracker on the character card. Printed standing up…
Rainbow Rebel on a Shattered Stage
This round globe planter features an outer wall that fractures into a continuous geometric pattern, letting multi-tone filaments shift as light catches the curved shape. It brings a modern, bold edge to a classic silhouette while keeping…
🔗 https://www.patreon.com/c/toadstoolweaver Most of my files are FREE, thanks to the incredible support of my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking some nice extras: ✨ Early access…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Bring the whimsical Mad Hatter from Alice in Wonderland…
The mechanism for the teeth chatterer broke so I designed a replacement one to keep the conversation going. Printed using PLA and standard Prusa slicer settings. The supports were done using organic supports and came away easily from the…
I re-designed a model I saw online to my aesthetic preferences, specifically it looks more like the classic game to me. I passed a few out at work, sold a couple, my son sells them now. We took my old designs and added his maker logo.…
This was created using a tool called Lentic: https://github.com/krickatthedisco/lentic/releases Lentic was developed using Cursor, but the images used to make this artwork are simply posterized screenshots from Twitch. Must be printed at…
This is an extremely simple yet functional item I use every day. PLA 33 minute print time 18 grams of filament (no supports) 6 meters of filament
I needed a breakable mug for our production of Young Frankenstein for the scene where the Hermit smashes his tankard. Couldn't find anything out there that worked, so designed one instead. It's a wooden style barrel tankard that shatters…
Bring the tea party to your desk. This Victorian top hat is inspired by the Hatter from Lewis Carroll’s Alice’s Adventures in Wonderland (1865). It has the “10/6” price card from John Tenniel’s original illustrations tucked into the band.…
This dramatic shattered stone banner captures the aftermath of conflict. The sculpt features a cracked and fragmented flag carved from stone, mounted on a weathered pole and set into a fractured ground base. The flowing shape of the…
Chatterer is a fictional character appearing in the Hellraiser franchise. He is a Cenobite, an order of extradimensional
✨ All models available in my shop are carefully designed with 3D printing in mind. ✨ I understand how valuable your time is, which is why all models are ready for immediate printing, optimized for a seamless printing process. 📦 My designs…
Chatterer is a fictional character appearing in the Hellraiser franchise. He is a Cenobite, an order of extradimensional
Old Shatterhand - Old Shatterhand (Lex Barker) and Winnetou (Pierre Brice) - 1964 3D printable model.
