Counting matching models…
This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…
Addition for the HDZero Goggles, to add a cold shoe mount via the front rails. Enables you to use cold shoe compatible microphones such as the Rode VideoMicro. There are two files, as the cold shoe mount is rotated 7.5 degrees relative to…
Based on my design for the eco camera, I developed the lux version as well. Please let me know if you'd like more angles and any modifications. Link to the eco version:…
This is the fantastic Rugged Box by @whity adapted to the HDZero goggles. It includes enough space to accommodate the expansion bay on the side, in theory (I don't have one to test). Also includes an area for cords, antennas, etc. You…
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
Printet in 98A TPU, tested OK with both 0.15 an 0.20 layer height. Without the bottom plate it comes out lighter than the one delivered with Moblite 7 HD :)
Designed for the hdzero eco camera it will also work with the analog pinch cam. Weighing in at 0.68g this is one of the lightest whoop canopies you can use that actually protects the camera, (your weight can vary on the type of tpu, your…
A HDZero goggle antenna mount for the TrueRC patch antennas. The mount is captive (no adhesive needed). Make sure to add a piece of foam between the backside of the antenna and the goggle front surface to prevent scratches from the solder…
This is a cover for the Skyzone Steadyview X receiver with screen and jog wheel that fits the HDZero goggles analog module bay. There are two versions, one with fan mount and one without. The Skyzone receiver comes with a fan but none of…
Here is another tripod mount for the MFD Crossbow Mini AAT. This one you're able to use either the SIYI HM30 video link, HDZero VRX, or the Walksnail VRX. I made the HDZero and Walksnail VRXs slide in type mounts. The HM30 uses a ¼ 20…
This is a completely new model for Rapidfire module cover for the HDzero analog module adapter. No breaking tabs an better fit on this one ;-) Hope it works better for you too.
I like the whoop canopy made by happymodel and also saw that rotor riot develop a tpu version for their vision whoop, but I don't like how heavy it is. So I created my own version which weighs less and protects hdzero v3 cams better. Some…
The mount uses the stock screw holes on the back of the Walksnail VRX, but the screws will need to be replaced with longer ones. The stock screws are a different pitch, but I found that M2's hold in the plastic just fine. This mount is…
Inspired by the cover designed by Adam_86. This is a ground up reworking of the RapidFire Cover for the HDZero Goggle Module 'Bay'. Included files - Blank Version, use this to roll your own variations of the cover. RapidFire - Vented…
Light weight ECO cam mount at 45 degrees for your tinywhoop. Printed using PP - not tested with other materials. Update 2024-9-30: Users reported they successfully printed the model using TPU, weight increased with 0.1g compared to PP.…
Module Cover for Skyzone SteadyView X. For proper contact you must extend the module pins a little bit. Use TPU! I think PLA, ABS or PETG wont fit. Material: TPU 95A Layer heigt: 0.2mm Infill: 90% Support: True
UPDATE: Added for rapidfire and eachine pro58. I didn't like the few covers I found for tbs fusion and none of them fit correctly either they didn't catch the notch correctly or broke off making the cover loose or fall off. So I created…
Raises the canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. the canopy comes in at…
A cover for the hdzero goggle analog module bay to fit the steadyview module from skyzone
Yo, this is a fix for the problem with the sma connector problem on the hdzero goggles. I have done a couple spacers and bushing for securing it all good without any scratches. I would suggest printing out all the files x2 and then…
Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.
This protector works for both the HDZero Micro V3 and Walksnail Avatar HD Pro
Five33 Switchback Zero - HDZero Nano 90 camera mount Similar to the Five33 stock camera mount for Switchback Zero. Works with the HDZero nano 90 + upgraded M8 lens (1.8mm FOV D:150° H:125V:75°) To be printed in TPU The mount provides a…
HDzero Freestyle VTx antenna mount for the Botgrinder Grinderino quad. Specifically designed to accommodate the antenna tube (length and diameter) of the antenna provided with the HDzero Freestyle VTx kit. Plus, it can add a splash of…
Update 01-18-23 Wide faceplate added! Update 01-17-23 I rebuilt the model from the ground up and improved it further. Added the step file for those who wish to make changes. Coming soon: Wide Faceplate version! Update 01-16-23 I replaced…
This adapter allows one to use an HDZero Lux camera in a common 14 mm wide FPV camera mount, eg. compatible with a Happymodel Crux3 canopy, plus many others. The photographed samples were printed by JLCPCB in PA12 on their MJF printers.…
This mount is designed for the HDZero VRX. use M3x6 screws to attach the antenna to the mount. There is a left and a right version. The mount is at an angle so that the antenna points forwards.
Adapted Nerdcopter's design for HDZero ECO cam Category: Other
This is a slidable version of the Walksnail VRX mount which I use to mount the VRX with velcro. I didn't like having to bend the clips on and off and this just seemed easier.
I updated my quad with the new HDZero Nano V3 camera. This camera has the same 14mm mounting as the original Nano Lite camera, but the lens is a little bigger. I made this pod to accommodate the larger lens. There is a small bit of…
WARNING - as there are no metal standoffs and the camera sits very close to the main stack this design ofers very little protection in the case of a crash - use at your own risk . It's probably best to mount the VTX at the top of the…
Toothpick / micro canopy, this is a light, strong and versatile canopy - 25.5 x 25.5 mounting points. The canopy houses components: HDZero nano HD camera New Sport version - (Canopy2021sport.3mf) lower profile canopy, improved mount for…
Case to protect your HDZero Box Pro. As an addition you can also store a VRX inside this box. The VRX space is designed for the RunCam WiFiLink VRX (please try OpenIPC or RubyFPV!) But a Walksnail VRX will probably also fit. The Inlay and…
"TinyTank" This is a prototype monocoque 4S 3 inch racing / freestyle quadcopter design with all the components (FC, VTX, wires, battery etc.) fitted internally. Hardware - M2 countersunk bolts (x4) & M2 nylon nuts (x4) The FC and VTX are…
A quick remix of https://www.thingiverse.com/thing:4830132 I needed to fix my 7 turn helicals antennas a little up to balance better the google in my face.
This is a remix of MDHR's goggle case design, I wanted to make the overall size of the case more compact, add space for TrueRC patch antennas in front of the goggle, and add some lens protection to prevent the strap from touching them. I…
This mount is designed to hold and protect the HDZero freestyle VTX antenna. It is available in 2 versions : 1 for Heks Joocy frame 1 for BLS Forza frame The standoffs should be M3 size with a diameter of 5mm. The antenna is inclined at a…
The base can mount a hdzero eco VTX , I have also increased the strength of the base and widened the screw holes between the base and wing to allow m2 bolts and nuts to fit. Use the original model to print the other parts and follow the…
This is a remix of the design by IsTim of a cover for the Skyzone SteadyViewX analog VTx module for use in the HDzero goggles. I included both .STL and .STEP files of the design based on IsTim's design. The purpose of this remix is to…
I was successful printing with a layer height of 0.16 mm with supports. Again the tabs may need to be thinned with a razor blade to ensure a snug and proper fit of the LED cover to the goggles. Remove the LED from the existing LED cover…
hdzero cam mounts for the eco and the lux
I several small modifications to make it more sturdy less prone to breaking the clips and some changes for V2
Typhon / Dindrone HDZero nano 90 mounts
Like the title says, I tweaked IsTim's Walksnail VRX mount for HDZero goggles to have 20º of up-tilt built in for those of us that tend to look down as we fly. Only includes one side. Mirror the part in your slicer to make the other side.
Watch this youtube video to understand how to properly fit and install these. https://youtu.be/dv0Cf3Jk1y4 These are based on this design from Tim https://www.printables.com/model/381810-hdzero-sma-fix
Raises the eco cam canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. The canopy comes…
Simple mount for the Impulse RC Apex 5'' Frame when using a HDZero Freestyle VTX v1 and an 85mm antenna.
These brackets feature some enhancements over other designs: X-Airs are held in place by clips. No adhesive or tape. Feet added to the bottom of the brackets supports the goggles and prevents the focus adjust wheels from touching. Curved…
This is a top Plate for the Switchback Pro combined with HDZero
Slight tweak to the great work by aviphysics. After my first rough landing with the original, I wanted retaining screws for the rear hatch. Just sink some nylon standoff into the foam with hot glue and you have a very sturdy,…
Canopy designed to fit onto toothpick styled frames. It is designed to house the HDZero Nano (14x16mm) with a Foxeer Lollipop v3 antenna. Will also fit other, standard (14x14mm) cameras like the Runcam Nano HD and older analog nanos. The…
Came up with this design to fit the HDZero Race VTX into a 30mm stack mount on the FPV Cycle Glide frame. Offset it so that it will sit inside the standoffs, just enough clearance to get squeeze it in and clear everything. I run mine on…
My analog modules like to pop apart in my bag, so I designed a enclosure that is screwed closed with M3 hardware. The bottom antenna hole is enlarged to support a stubby omni. Files are orientated correctly you will need supports from bed…
La HD-ZERO-2P La frame HD en 2 pouces pour un coût total de moins de 10€ c’est possible Il te faut: Du filament TPU70D pour imprimer la base FC/Moteurs ( axes 9 ou 12) Du Nanovia TPU70D pour imprimer le reste des pièces. J'ai modifié la…
TPU protector for the RunCam HDZero Nano 90
A stand to help support the bottom half of the shell without putting strain on the display ribbon cables. Print detail isnt to important on this model, I would do large layer heights and low infill, a modifier can be used fo the upper…
However good the basic fit of the HDZero Goggle is. It's quite front heavy. For me this meant it kept sliding down. Making it very difficult to keep the image vertically centered and having to readjust constantly. This shim makes the…
After destroying 2 lenses in 1 night i decided to make a canopy that better protects the lens. The sides need to be trimmed a little bit so they are not visible while flying. Update , added 30 degree version and 2 extra protection igow…
This is an HDZero VRX Rail Mount for the TrueRC X2-AIR MK II 5.8GHz Patch Antenna Pair. This adds a 40deg angle to the original rail mount. There are two versions for the left and right sides of the HDZero VRX Goggles. Update 11/16/22 -…
Print this flat in TPU with no supports. Weighed approximately 0.6 grams.
45 and 50 degree for Predator Nano and HDZero Nano 90FPS
Designed to fit Micro AXII 2 stubby antennas. The Plugs are modelled to the official goggles 3d model. Printing the correct pieces for each side may be necessary, i have faced some weird alignment issues with them. Mine are printed in…
2 Models which fit on the Mark5 5inch frame. It can actually be used with any other small antenna but this one works nicely with the HDZero Freestyle V2 VTX
This is a front rail system to mount the TrueRC X²-AIR 5.8 MK II PAIR FOR HDZERO VRX4 on Walksnail Goggles X. Mirror it on your slice software to get the other side. Here is the Antennas:…
I really liked the Joker canopy on my analog whoops so i remixed them. New versions for the HDzero Eco and HDzero Lux cam. Lightweigt , Eco version printed in tpu95A is 0,7 gr the lux version is a little bit more. Adjustable angles ,…
Nice little camera holder for the HDZero Freestyle VTX to hold camera and included antenna. Prints out of PLA+/Tough PLA, PETG, ABS or TPU. I would not print out of standard PLA just because it may be too brittle for the screws to thread…
Simple mount for the hdzero vrx. Use adhesive Velcro to attach to the top plate of the goggles
Beefy mount to hold and protect the HDZero Micro V2 Cam in the Impulse RC Apex 5'' Frame at 25deg.
This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in…
A 30° fixed-angle canopy for the HDZero Lux and Walksnail Avatar HD lite cameras with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective…
Could not find a good cam holder for the HDzero nano V3 cam on a fractal frame. The original did not fit nicely because the cam is 16 mm high and i did not like the way the mipi cable sat on front of the carbon. So i made something new…
These are fixed-angle mounts for the most common HDZero cameras (Micro V2 and Nano 90) on the SouthEastFPV Typhon v7 frame . They're angled at 50° for my personal racing preference. Design The fit on the lens is pretty tight but should it…
This is my HDZ Nano90 TPU camera mount for the KayouMini FPV quad frame. In order to reduce weight, instead of holes, I use a single perimeter, with 15% gyroid infill. This creates a light “air matress” effect that protects the camera…
Canopy that fits the upgraded lens for the nano 90 camera
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles
Since the protective Kapton tape started to peel after a few times attaching and detaching the module I designed this part to close the back side. I printed it in TPU and pressed it in. You might also want to check out my other models for…
This fits a kayoumini build using the XT30 cable that comes with the AIO15 and I have tested it with the flywoo explorer 420mAh HV 2S LiPo Inspired by models such as: and
Toothpick style canopy deigned to accept: HDZero - Nano camera RX - ELRS PP / EP2 receivers (the RX fits behind the camera on a tray - glue in place) VTX antenna - friction fit or glue This version of the canopy is intended for use with…
This tool is designed to allow you to easily focus the lens on the camera without having to remove it from the camera mount. It also does not obscure your FPV view while it is attached, so you can pop it on and use one of the arms to…
This is a Caddx Walksnail Ascent Pro VRX mount for the HDzero BoxPro + FPV Goggles New version accommodates top mount as well as front mount, and folds flat for storage/transport. Use the top mount to reduce neck strain but you will need…
This was made for using the lux camera with the aio15 in the kayoumini.
You might also want to check out my other models for the HDZero Goggles: https://www.printables.com/model/1009854-hdzero-goggle-expansion-module-back-cap https://www.printables.com/model/1013045-hdzero-goggle-expansion-module-clip-hole-cap
Remixed HDZero Lite Whoop Camera Mount (Adjustable Angle) by MrShutterBug to include a hood for a little added lens protection. High - HDZero Lite Lens Med - HDZero Lite Lens (glued like in MrShutterBug's video - less surface area to hold…
work in progress, designed to mount to freestyle v2 stock antenna on the volador 5in frame 5mm hex standoffs
This is intended to cover a single eyepiece on the HDZero goggles. Print two for dust covers or print one to help with eye alignment issues, such as esophoria. Find the source files for this and my other designs in this repository:…
Bezerk IQ0 Neuron Frame Camera Mount 47.5 Degrees 23mm and a 25mm Stand off height The camera mount was created and modified using.
Nice little ripper for around the house. Baby APEX 2.5 HDZero AIO15 HDZero LUX Cam T-Motor 1103 8000KV Gemfan 2512 2.5 x 1.2 x 3 Print the camera ring in a solid material, the dampers in TPU or VarioShore. I removed a little bit of the…
HDZero Goggle + SkyZoneSteadyviewX cover (Extended for stackable pins)
I printed mine at .1mm and put the cover on its back. I used 3mm heat sets for holding the cover on with some 3x4mm cap srews. Thanks and suggestions are welcome!
Description (English): This adapter is designed to securely and precisely mount the TrueRC X² Air 5.8 MK II antenna onto HDZero Goggles. It ensures a stable fit, optimal alignment, and prevents the antenna from rotating unintentionally.…
HDZero Freestyle 20-30mm adapter that will fit almost any 20mm mounting pattern. I print this in ABS for strength, but PETG might work well too. Use 5 walls and 40% infill. This adapter will not work when printed in TPU.
Cam mount for Kronos frame - cam Hdzero micro V2
Model of a HDZero Freestyle V1 VTX. To test fit this VTX to your frame or model an adapter for it. Category: R/C Vehicles
This small adapter is for using a strap designed for Fat Shark goggles with the HDZero Goggles. To use: Print two. Use PETG or another sunlight-resistant, rigid material. Push the loop of the strap through the metal mount of the goggles…
for hdzero box goggles to hold a vrx
Just add a tiny zip tie at the top of the print to create pressure on the antenna so that it doesn't move.
The Kaha is a frame I designed, designed to be a super strong durable drone racing frame which is cost-effective, runs 30mm electronics if you like and protects those electronics. Kaha translates to strength in Te Reo which is the…
VTX holder for HDZero Freestyle VTX. This fits 30x30 mount pattern. HDZero_Freestyle_Mount_H2 has .25mm padding around VTX HDZero_Freestyle_Mount_H2_P4 has a 4.5mm padding around wiring harness ports.
A protection plate for your electronics of the kronos frame :)
HDZero Goggle Faceplate Shim to fit my goggles better. To give a slight down tilt and to have the screens better in focus and centered in my field of view. Add micro velcro on both sides (the stuff that's on your goggle foam) Category:…
